kernel_optimize_test/drivers/iio
Greg Kroah-Hartman 3f3d31622a First set of IIO fixes for the 5.4 cycle.
* adis16400
   - Make sure to free memory on a few failure paths.
 * adxl372
   - Fix wrong fifo depth
   - Fix wrong indexing of data from the fifo.
   - Perform a reset at startup to avoid a problem with inconsistent state.
 * axp288
   - This is a fix for a fix.  The original fix made sure we kept the
     configuration from some firmwares to preserve a bias current.
     Unfortunately it appears the previous behaviour was working around
     a buggy firmware by overwriting the wrong value it had.  Hence
     a regression was seen.
 * bmc150
   - Fix the centre temperature.  This was due to an error in one of the
     datasheets.
 * hx711
   - Fix an issue where a badly timed interrupt could lead to a control
     line being high long enough to put the device into a low power state.
 * meson_sar_adc
   - Fix a case where the irq was enabled before everything it uses was
     allocated.
 * st_lsm6dsx
   - Ensure we don't set the sensor sensitivity to 0 as it will force
     all readings to 0.
   - Fix a wait time for the slave i2c controller when the accelerometer
     is not enabled.
 * stm32-adc
   - Precursor for fix. Move a set of register definitions to a header.
   - Fix a race when several ADCs are in use with some using interrupts
     to control the dataflow and some using DMA.
 * vcnl4000
   - Fix a garbage of_match_table in which a string was passed instead
     of the intended enum.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl2eJHgRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojPzA/+KHWytPVz58/DWZ2tRYvfcj4xF3HGEbOV
 FX1qgDVe1zixHkL8S3R5tNhdCSIl1016tknBv1ZcE1M8BewQF+GE6eyAw+5Gm8Ge
 3P1dt17EHfvcOpMBNMP1c9Mp/+OdKs+cSjp8G2MN2O0UGGBQdTPuhC+l4nzmOwCo
 kbAass0JVTlgxxgcnh6D37Slq4/QqZJBwEmHWEHQJmQfGd+ue+VEdh3XFLPC+gu9
 xh63WkubPuzkW2u9iJBDmGedq70pcMbfq6Fj+4YWdxrf0NzNwZIpVaIBRT4/15T0
 h+OVFnmFZVRoyiC7WvntIO4/dc3EtxOTTm38OqQpDpy/9DfkI+Nn5Z0bninIU5/x
 QT8puyyiuoOABHIttDabxSJQphjH3QeoCnWZiaGy/4ZZl1iHQsxF69N4WaDLl8An
 G/oqy0Zjb1C4pID1RY3jB+kdqRIZD+o0keoSxM2eIt9qcZXIQUHoGNuBXxrHWYis
 OGxuGci5Vr6IF3KOL3KG08at9JVwFiQRKRebOWn7eCiT8iTqyujHGh2HxBvRvZxq
 KXMqanTjbbwmv1vl+yMPYwuPPpcMTOxOhhBuT4L0TqYMi2dlnA8BP+YIIZFsOxbg
 LSJUZn1to9TTkjNCW4q3fTkrlgcBL9MGnQtzAgDzdvnwDqVG7cWYhsYSvxh7hpTN
 4EUtoqLKgjI=
 =s9EA
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.4 cycle.

* adis16400
  - Make sure to free memory on a few failure paths.
* adxl372
  - Fix wrong fifo depth
  - Fix wrong indexing of data from the fifo.
  - Perform a reset at startup to avoid a problem with inconsistent state.
* axp288
  - This is a fix for a fix.  The original fix made sure we kept the
    configuration from some firmwares to preserve a bias current.
    Unfortunately it appears the previous behaviour was working around
    a buggy firmware by overwriting the wrong value it had.  Hence
    a regression was seen.
* bmc150
  - Fix the centre temperature.  This was due to an error in one of the
    datasheets.
* hx711
  - Fix an issue where a badly timed interrupt could lead to a control
    line being high long enough to put the device into a low power state.
* meson_sar_adc
  - Fix a case where the irq was enabled before everything it uses was
    allocated.
* st_lsm6dsx
  - Ensure we don't set the sensor sensitivity to 0 as it will force
    all readings to 0.
  - Fix a wait time for the slave i2c controller when the accelerometer
    is not enabled.
* stm32-adc
  - Precursor for fix. Move a set of register definitions to a header.
  - Fix a race when several ADCs are in use with some using interrupts
    to control the dataflow and some using DMA.
* vcnl4000
  - Fix a garbage of_match_table in which a string was passed instead
    of the intended enum.

* tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: Fix an undefied reference error in noa1305_probe
  iio: light: opt3001: fix mutex unlock race
  iio: adc: ad799x: fix probe error handling
  iio: light: add missing vcnl4040 of_compatible
  iio: light: fix vcnl4000 devicetree hooks
  iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  iio: adc: axp288: Override TS pin bias current for some models
  iio: imu: adis16400: fix memory leak
  iio: imu: adis16400: release allocated memory on failure
  iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
  iio: adc: stm32-adc: move registers definitions
  iio: accel: adxl372: Perform a reset at start up
  iio: accel: adxl372: Fix push to buffers lost samples
  iio: accel: adxl372: Fix/remove limitation for FIFO samples
  iio: adc: hx711: fix bug in sampling of data
  iio: fix center temperature of bmc150-accel-core
  iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
  iio: adc: meson_saradc: Fix memory allocation order
2019-10-10 11:18:37 +02:00
..
accel First set of IIO fixes for the 5.4 cycle. 2019-10-10 11:18:37 +02:00
adc First set of IIO fixes for the 5.4 cycle. 2019-10-10 11:18:37 +02:00
afe treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
amplifiers Second set of IIO device support, features, cleanups and minor fixes for 5.3. 2019-07-01 10:58:13 +02:00
buffer treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
chemical treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
common chrome platform changes for v5.4 2019-09-19 14:14:28 -07:00
dac iio: dac: ad5380: fix incorrect assignment to val 2019-09-03 18:55:50 +01:00
dummy spi: docs: convert to ReST and add it to the kABI bookset 2019-07-31 14:13:13 -06:00
frequency iio: frequency: adf4371: Fix output frequency setting 2019-08-05 17:38:33 +01:00
gyro iio:st_sensors: remove buffer allocation at each buffer enable 2019-08-11 09:26:04 +01:00
health treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
humidity iio: humidity: Use device-managed APIs 2019-07-27 22:52:06 +01:00
imu iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller 2019-10-09 19:11:28 +01:00
light First set of IIO fixes for the 5.4 cycle. 2019-10-10 11:18:37 +02:00
magnetometer iio:st_sensors: remove buffer allocation at each buffer enable 2019-08-11 09:26:04 +01:00
multiplexer treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
orientation treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309 2019-06-05 17:37:04 +02:00
potentiometer iio: potentiometer: add a driver for Maxim 5432-5435 2019-08-05 14:25:08 +01:00
potentiostat treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
pressure chrome platform changes for v5.4 2019-09-19 14:14:28 -07:00
proximity Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section 2019-08-25 19:08:36 +01:00
resolver treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
temperature iio: maxim_thermocouple: Use device-managed APIs 2019-07-27 22:52:06 +01:00
trigger IIO: stm32: Remove quadrature related functions from trigger driver 2019-07-27 20:11:18 +01:00
iio_core_trigger.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
iio_core.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-buffer.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-configfs.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-core.c Staging / IIO driver update for 5.3-rc1 2019-07-11 15:36:02 -07:00
industrialio-event.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-sw-device.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-sw-trigger.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-trigger.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-triggered-event.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
inkern.c Driver Core and debugfs changes for 5.3-rc1 2019-07-12 12:24:03 -07:00
Kconfig Second set of IIO device support, features, cleanups and minor fixes for 5.3. 2019-07-01 10:58:13 +02:00
Makefile counter: stm32-lptimer: add counter device 2019-04-25 21:33:41 +02:00