AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
040f6b4f14
kernel_optimize_test/drivers/ide
History
Bartlomiej Zolnierkiewicz 040f6b4f14 tx493xide: use ->pio_mode value to determine pair device speed 
Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:52:35 -08:00
..
aec62xx.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
ali14xx.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
alim15x3.c alim15x3: fix handling of UDMA enable bit 2010-01-19 01:52:31 -08:00
amd74xx.c amd74xx: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:32 -08:00
at91_ide.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
atiixp.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
au1xxx-ide.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
buddha.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
cmd64x.c cmd64x: fix handling of address setup timings 2010-01-19 01:52:32 -08:00
cmd640.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
cs5520.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
cs5530.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
cs5535.c cs5535: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:33 -08:00
cs5536.c cs5536: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:33 -08:00
cy82c693.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
delkin_cb.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
dtc2278.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
falconide.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
gayle.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
hpt366.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
ht6560b.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
icside.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
ide_platform.c drivers/ide/ide_platform.c: use resource_size() 2009-11-23 10:30:34 -08:00
ide-4drives.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-acpi.c ACPICA: Major update for acpi_get_object_info external interface 2009-08-27 10:17:15 -04:00
ide-atapi.c Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 2009-06-20 10:11:11 -07:00
ide-cd_ioctl.c ide: remove IDE_AFLAG_NO_DOORLOCKING 2008-10-17 18:09:11 +02:00
ide-cd_verbose.c block: replace sizeof(rq->cmd) with BLK_MAX_CDB 2008-04-29 14:48:55 +02:00
ide-cd.c const: make block_device_operations const 2009-09-22 07:17:25 -07:00
ide-cd.h ide-cd: convert to using generic sense request 2009-04-28 07:37:30 +02:00
ide-cs.c pcmcia: rework the irq_req_t typedef 2009-11-28 18:03:14 +01:00
ide-devsets.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
ide-disk_ioctl.c [PATCH] switch ide_disk_ops ->ioctl() to sane prototype 2008-10-21 07:47:30 -04:00
ide-disk_proc.c ide: convert to ->proc_fops 2009-09-01 17:52:57 -07:00
ide-disk.c ide: fix memory leak when flush command is issued 2009-07-21 20:23:46 -07:00
ide-disk.h [PATCH] switch ide_disk_ops ->ioctl() to sane prototype 2008-10-21 07:47:30 -04:00
ide-dma-sff.c ide: remove wmb() from ide-dma-sff.c and scc_pata.c 2009-04-08 14:12:49 +02:00
ide-dma.c ide: relax DMA info validity checking 2009-06-24 00:32:32 -07:00
ide-eh.c ide: always kill the whole request on error 2009-06-25 23:57:16 -07:00
ide-floppy_ioctl.c ide-atapi: remove pc->buf 2009-05-15 06:44:38 +02:00
ide-floppy_proc.c ide: convert to ->proc_fops 2009-09-01 17:52:57 -07:00
ide-floppy.c ide: always kill the whole request on error 2009-06-25 23:57:16 -07:00
ide-floppy.h [PATCH] switch ide_disk_ops ->ioctl() to sane prototype 2008-10-21 07:47:30 -04:00
ide-gd.c const: make block_device_operations const 2009-09-22 07:17:25 -07:00
ide-gd.h ide: move ->failed_pc to ide_drive_t 2009-03-27 12:46:34 +01:00
ide-generic.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-h8300.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-io-std.c ide: refactor tf_read() method 2009-04-08 14:13:03 +02:00
ide-io.c Revert "ide: improve handling of Power Management requests" 2009-07-06 12:39:27 -07:00
ide-ioctls.c ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead of UDMA6 2009-11-25 15:04:54 -08:00
ide-iops.c ide: add SATA cable detection support 2010-01-19 01:41:57 -08:00
ide-legacy.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-lib.c Merge branch 'master' into for-2.6.31 2009-05-22 20:28:35 +02:00
ide-park.c ide: use blk_run_queue() instead of blk_start_queueing() 2009-04-28 07:37:28 +02:00
ide-pci-generic.c pata_piccolo: Driver for old Toshiba chipsets 2009-12-03 14:35:31 -05:00
ide-pio-blacklist.c ide: move PIO blacklist to ide-pio-blacklist.c 2008-07-16 20:33:39 +02:00
ide-pm.c ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y 2009-06-29 19:20:42 -07:00
ide-pnp.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-probe.c ide: add drive->pio_mode field 2010-01-19 01:42:00 -08:00
ide-proc.c ide: use printk_once 2009-09-22 16:29:00 -07:00
ide-scan-pci.c ide: replace remaining __FUNCTION__ occurrences 2008-04-26 22:25:20 +02:00
ide-sysfs.c ide: move sysfs support to ide-sysfs.c 2009-01-02 16:12:48 +01:00
ide-tape.c ide_tape: kill off use of the ->ioctl operation 2010-01-12 01:56:54 -08:00
ide-taskfile.c ide: fix races in handling of user-space SET XFER commands 2009-08-07 10:43:00 -07:00
ide-timings.c ide-timings: use ->pio_mode value to determine fastest PIO speed 2010-01-19 01:47:29 -08:00
ide-xfer-mode.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
ide.c ide: preserve Host Protected Area by default (v2) 2009-06-07 13:52:52 +02:00
it821x.c it821x: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:34 -08:00
it8172.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
it8213.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
jmicron.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
Kconfig ide: update Kconfig text to mark as deprecated 2009-10-29 03:09:26 -07:00
macide.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
Makefile ide: merge ide_arm and ide_generic host drivers 2009-03-31 20:15:24 +02:00
ns87415.c ide: refactor tf_read() method 2009-04-08 14:13:03 +02:00
opti621.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
palm_bk3710.c palm_bk3710: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:34 -08:00
pdc202xx_new.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
pdc202xx_old.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
piix.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
pmac.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
q40ide.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
qd65xx.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
qd65xx.h ide: do not access ide_drive_t 'drive_data' field directly 2009-06-15 22:13:44 +02:00
rapide.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
rz1000.c rz1000: apply chipset quirks early (v2) 2008-12-29 20:27:33 +01:00
sc1200.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
scc_pata.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
serverworks.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
setup-pci.c ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() 2009-06-10 14:37:21 +02:00
sgiioc4.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
siimage.c siimage: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:35 -08:00
sis5513.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
sl82c105.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
slc90e66.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
tc86c001.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
triflex.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
trm290.c ide: turn selectproc() method into dev_select() method (take 5) 2009-03-31 20:15:32 +02:00
tx4938ide.c tx493xide: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:35 -08:00
tx4939ide.c tx493xide: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:35 -08:00
umc8672.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
via82cxxx.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00