forked from luck/tmp_suning_uos_patched
28e5d3bb03
The ACCES 104-QUAD-8 is a general purpose quadrature encoder counter/interface board. The 104-QUAD-8 is capable of monitoring the outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit dual-axis quadrature counter chips. Core functions handled by the LS7266R1, such as direction and total count, are available. Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and also clears the counter's respective error flag. Although the counters have a 25-bit range, only the lower 24 bits may be set, either directly or via a counter's preset attribute. Interrupts are not supported by this driver. This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES 104-QUAD-4. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
97 lines
2.7 KiB
Plaintext
97 lines
2.7 KiB
Plaintext
#
|
|
# Industrial I/O subsystem configuration
|
|
#
|
|
|
|
menuconfig IIO
|
|
tristate "Industrial I/O support"
|
|
select ANON_INODES
|
|
help
|
|
The industrial I/O subsystem provides a unified framework for
|
|
drivers for many different types of embedded sensors using a
|
|
number of different physical interfaces (i2c, spi, etc).
|
|
|
|
if IIO
|
|
|
|
config IIO_BUFFER
|
|
bool "Enable buffer support within IIO"
|
|
help
|
|
Provide core support for various buffer based data
|
|
acquisition methods.
|
|
|
|
if IIO_BUFFER
|
|
source "drivers/iio/buffer/Kconfig"
|
|
endif # IIO_BUFFER
|
|
|
|
config IIO_CONFIGFS
|
|
tristate "Enable IIO configuration via configfs"
|
|
select CONFIGFS_FS
|
|
help
|
|
This allows configuring various IIO bits through configfs
|
|
(e.g. software triggers). For more info see
|
|
Documentation/iio/iio_configfs.txt.
|
|
|
|
config IIO_TRIGGER
|
|
bool "Enable triggered sampling support"
|
|
help
|
|
Provides IIO core support for triggers. Currently these
|
|
are used to initialize capture of samples to push into
|
|
buffers. The triggers are effectively a 'capture
|
|
data now' interrupt.
|
|
|
|
config IIO_CONSUMERS_PER_TRIGGER
|
|
int "Maximum number of consumers per trigger"
|
|
depends on IIO_TRIGGER
|
|
default "2"
|
|
help
|
|
This value controls the maximum number of consumers that a
|
|
given trigger may handle. Default is 2.
|
|
|
|
config IIO_SW_DEVICE
|
|
tristate "Enable software IIO device support"
|
|
select IIO_CONFIGFS
|
|
help
|
|
Provides IIO core support for software devices. A software
|
|
device can be created via configfs or directly by a driver
|
|
using the API provided.
|
|
|
|
config IIO_SW_TRIGGER
|
|
tristate "Enable software triggers support"
|
|
select IIO_CONFIGFS
|
|
help
|
|
Provides IIO core support for software triggers. A software
|
|
trigger can be created via configfs or directly by a driver
|
|
using the API provided.
|
|
|
|
config IIO_TRIGGERED_EVENT
|
|
tristate
|
|
select IIO_TRIGGER
|
|
help
|
|
Provides helper functions for setting up triggered events.
|
|
|
|
source "drivers/iio/accel/Kconfig"
|
|
source "drivers/iio/adc/Kconfig"
|
|
source "drivers/iio/amplifiers/Kconfig"
|
|
source "drivers/iio/chemical/Kconfig"
|
|
source "drivers/iio/common/Kconfig"
|
|
source "drivers/iio/counter/Kconfig"
|
|
source "drivers/iio/dac/Kconfig"
|
|
source "drivers/iio/dummy/Kconfig"
|
|
source "drivers/iio/frequency/Kconfig"
|
|
source "drivers/iio/gyro/Kconfig"
|
|
source "drivers/iio/health/Kconfig"
|
|
source "drivers/iio/humidity/Kconfig"
|
|
source "drivers/iio/imu/Kconfig"
|
|
source "drivers/iio/light/Kconfig"
|
|
source "drivers/iio/magnetometer/Kconfig"
|
|
source "drivers/iio/orientation/Kconfig"
|
|
if IIO_TRIGGER
|
|
source "drivers/iio/trigger/Kconfig"
|
|
endif #IIO_TRIGGER
|
|
source "drivers/iio/potentiometer/Kconfig"
|
|
source "drivers/iio/potentiostat/Kconfig"
|
|
source "drivers/iio/pressure/Kconfig"
|
|
source "drivers/iio/proximity/Kconfig"
|
|
source "drivers/iio/temperature/Kconfig"
|
|
|
|
endif # IIO
|