forked from luck/tmp_suning_uos_patched
352 lines
14 KiB
C
352 lines
14 KiB
C
/*
|
|
* FarSync X21 driver for Linux
|
|
*
|
|
* Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards
|
|
*
|
|
* Copyright (C) 2001 FarSite Communications Ltd.
|
|
* www.farsite.co.uk
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Author: R.J.Dunlop <bob.dunlop@farsite.co.uk>
|
|
*
|
|
* For the most part this file only contains structures and information
|
|
* that is visible to applications outside the driver. Shared memory
|
|
* layout etc is internal to the driver and described within farsync.c.
|
|
* Overlap exists in that the values used for some fields within the
|
|
* ioctl interface extend into the cards firmware interface so values in
|
|
* this file may not be changed arbitrarily.
|
|
*/
|
|
|
|
/* What's in a name
|
|
*
|
|
* The project name for this driver is Oscar. The driver is intended to be
|
|
* used with the FarSite T-Series cards (T2P & T4P) running in the high
|
|
* speed frame shifter mode. This is sometimes referred to as X.21 mode
|
|
* which is a complete misnomer as the card continues to support V.24 and
|
|
* V.35 as well as X.21.
|
|
*
|
|
* A short common prefix is useful for routines within the driver to avoid
|
|
* conflict with other similar drivers and I chosen to use "fst_" for this
|
|
* purpose (FarSite T-series).
|
|
*
|
|
* Finally the device driver needs a short network interface name. Since
|
|
* "hdlc" is already in use I've chosen the even less informative "sync"
|
|
* for the present.
|
|
*/
|
|
#define FST_NAME "fst" /* In debug/info etc */
|
|
#define FST_NDEV_NAME "sync" /* For net interface */
|
|
#define FST_DEV_NAME "farsync" /* For misc interfaces */
|
|
|
|
|
|
/* User version number
|
|
*
|
|
* This version number is incremented with each official release of the
|
|
* package and is a simplified number for normal user reference.
|
|
* Individual files are tracked by the version control system and may
|
|
* have individual versions (or IDs) that move much faster than the
|
|
* the release version as individual updates are tracked.
|
|
*/
|
|
#define FST_USER_VERSION "1.04"
|
|
|
|
|
|
/* Ioctl call command values
|
|
*/
|
|
#define FSTWRITE (SIOCDEVPRIVATE+10)
|
|
#define FSTCPURESET (SIOCDEVPRIVATE+11)
|
|
#define FSTCPURELEASE (SIOCDEVPRIVATE+12)
|
|
#define FSTGETCONF (SIOCDEVPRIVATE+13)
|
|
#define FSTSETCONF (SIOCDEVPRIVATE+14)
|
|
|
|
|
|
/* FSTWRITE
|
|
*
|
|
* Used to write a block of data (firmware etc) before the card is running
|
|
*/
|
|
struct fstioc_write {
|
|
unsigned int size;
|
|
unsigned int offset;
|
|
unsigned char data[0];
|
|
};
|
|
|
|
|
|
/* FSTCPURESET and FSTCPURELEASE
|
|
*
|
|
* These take no additional data.
|
|
* FSTCPURESET forces the cards CPU into a reset state and holds it there.
|
|
* FSTCPURELEASE releases the CPU from this reset state allowing it to run,
|
|
* the reset vector should be setup before this ioctl is run.
|
|
*/
|
|
|
|
/* FSTGETCONF and FSTSETCONF
|
|
*
|
|
* Get and set a card/ports configuration.
|
|
* In order to allow selective setting of items and for the kernel to
|
|
* indicate a partial status response the first field "valid" is a bitmask
|
|
* indicating which other fields in the structure are valid.
|
|
* Many of the field names in this structure match those used in the
|
|
* firmware shared memory configuration interface and come originally from
|
|
* the NT header file Smc.h
|
|
*
|
|
* When used with FSTGETCONF this structure should be zeroed before use.
|
|
* This is to allow for possible future expansion when some of the fields
|
|
* might be used to indicate a different (expanded) structure.
|
|
*/
|
|
struct fstioc_info {
|
|
unsigned int valid; /* Bits of structure that are valid */
|
|
unsigned int nports; /* Number of serial ports */
|
|
unsigned int type; /* Type index of card */
|
|
unsigned int state; /* State of card */
|
|
unsigned int index; /* Index of port ioctl was issued on */
|
|
unsigned int smcFirmwareVersion;
|
|
unsigned long kernelVersion; /* What Kernel version we are working with */
|
|
unsigned short lineInterface; /* Physical interface type */
|
|
unsigned char proto; /* Line protocol */
|
|
unsigned char internalClock; /* 1 => internal clock, 0 => external */
|
|
unsigned int lineSpeed; /* Speed in bps */
|
|
unsigned int v24IpSts; /* V.24 control input status */
|
|
unsigned int v24OpSts; /* V.24 control output status */
|
|
unsigned short clockStatus; /* lsb: 0=> present, 1=> absent */
|
|
unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */
|
|
unsigned short cardMode; /* lsb: LED id mode */
|
|
unsigned short debug; /* Debug flags */
|
|
unsigned char transparentMode; /* Not used always 0 */
|
|
unsigned char invertClock; /* Invert clock feature for syncing */
|
|
unsigned char startingSlot; /* Time slot to use for start of tx */
|
|
unsigned char clockSource; /* External or internal */
|
|
unsigned char framing; /* E1, T1 or J1 */
|
|
unsigned char structure; /* unframed, double, crc4, f4, f12, */
|
|
/* f24 f72 */
|
|
unsigned char interface; /* rj48c or bnc */
|
|
unsigned char coding; /* hdb3 b8zs */
|
|
unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */
|
|
unsigned char equalizer; /* short or lon haul settings */
|
|
unsigned char loopMode; /* various loopbacks */
|
|
unsigned char range; /* cable lengths */
|
|
unsigned char txBufferMode; /* tx elastic buffer depth */
|
|
unsigned char rxBufferMode; /* rx elastic buffer depth */
|
|
unsigned char losThreshold; /* Attenuation on LOS signal */
|
|
unsigned char idleCode; /* Value to send as idle timeslot */
|
|
unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */
|
|
unsigned int framingErrorCount; /* framing errors */
|
|
unsigned int codeViolationCount; /* code violations */
|
|
unsigned int crcErrorCount; /* CRC errors */
|
|
int lineAttenuation; /* in dB*/
|
|
unsigned short lossOfSignal;
|
|
unsigned short receiveRemoteAlarm;
|
|
unsigned short alarmIndicationSignal;
|
|
};
|
|
|
|
/* "valid" bitmask */
|
|
#define FSTVAL_NONE 0x00000000 /* Nothing valid (firmware not running).
|
|
* Slight misnomer. In fact nports,
|
|
* type, state and index will be set
|
|
* based on hardware detected.
|
|
*/
|
|
#define FSTVAL_OMODEM 0x0000001F /* First 5 bits correspond to the
|
|
* output status bits defined for
|
|
* v24OpSts
|
|
*/
|
|
#define FSTVAL_SPEED 0x00000020 /* internalClock, lineSpeed, clockStatus
|
|
*/
|
|
#define FSTVAL_CABLE 0x00000040 /* lineInterface, cableStatus */
|
|
#define FSTVAL_IMODEM 0x00000080 /* v24IpSts */
|
|
#define FSTVAL_CARD 0x00000100 /* nports, type, state, index,
|
|
* smcFirmwareVersion
|
|
*/
|
|
#define FSTVAL_PROTO 0x00000200 /* proto */
|
|
#define FSTVAL_MODE 0x00000400 /* cardMode */
|
|
#define FSTVAL_PHASE 0x00000800 /* Clock phase */
|
|
#define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */
|
|
#define FSTVAL_DEBUG 0x80000000 /* debug */
|
|
#define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */
|
|
|
|
/* "type" */
|
|
#define FST_TYPE_NONE 0 /* Probably should never happen */
|
|
#define FST_TYPE_T2P 1 /* T2P X21 2 port card */
|
|
#define FST_TYPE_T4P 2 /* T4P X21 4 port card */
|
|
#define FST_TYPE_T1U 3 /* T1U X21 1 port card */
|
|
#define FST_TYPE_T2U 4 /* T2U X21 2 port card */
|
|
#define FST_TYPE_T4U 5 /* T4U X21 4 port card */
|
|
#define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */
|
|
|
|
/* "family" */
|
|
#define FST_FAMILY_TXP 0 /* T2P or T4P */
|
|
#define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */
|
|
|
|
/* "state" */
|
|
#define FST_UNINIT 0 /* Raw uninitialised state following
|
|
* system startup */
|
|
#define FST_RESET 1 /* Processor held in reset state */
|
|
#define FST_DOWNLOAD 2 /* Card being downloaded */
|
|
#define FST_STARTING 3 /* Released following download */
|
|
#define FST_RUNNING 4 /* Processor running */
|
|
#define FST_BADVERSION 5 /* Bad shared memory version detected */
|
|
#define FST_HALTED 6 /* Processor flagged a halt */
|
|
#define FST_IFAILED 7 /* Firmware issued initialisation failed
|
|
* interrupt
|
|
*/
|
|
/* "lineInterface" */
|
|
#define V24 1
|
|
#define X21 2
|
|
#define V35 3
|
|
#define X21D 4
|
|
#define T1 5
|
|
#define E1 6
|
|
#define J1 7
|
|
|
|
/* "proto" */
|
|
#define FST_RAW 4 /* Two way raw packets */
|
|
#define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */
|
|
|
|
/* "internalClock" */
|
|
#define INTCLK 1
|
|
#define EXTCLK 0
|
|
|
|
/* "v24IpSts" bitmask */
|
|
#define IPSTS_CTS 0x00000001 /* Clear To Send (Indicate for X.21) */
|
|
#define IPSTS_INDICATE IPSTS_CTS
|
|
#define IPSTS_DSR 0x00000002 /* Data Set Ready (T2P Port A) */
|
|
#define IPSTS_DCD 0x00000004 /* Data Carrier Detect */
|
|
#define IPSTS_RI 0x00000008 /* Ring Indicator (T2P Port A) */
|
|
#define IPSTS_TMI 0x00000010 /* Test Mode Indicator (Not Supported)*/
|
|
|
|
/* "v24OpSts" bitmask */
|
|
#define OPSTS_RTS 0x00000001 /* Request To Send (Control for X.21) */
|
|
#define OPSTS_CONTROL OPSTS_RTS
|
|
#define OPSTS_DTR 0x00000002 /* Data Terminal Ready */
|
|
#define OPSTS_DSRS 0x00000004 /* Data Signalling Rate Select (Not
|
|
* Supported) */
|
|
#define OPSTS_SS 0x00000008 /* Select Standby (Not Supported) */
|
|
#define OPSTS_LL 0x00000010 /* Maintenance Test (Not Supported) */
|
|
|
|
/* "cardMode" bitmask */
|
|
#define CARD_MODE_IDENTIFY 0x0001
|
|
|
|
/*
|
|
* Constants for T1/E1 configuration
|
|
*/
|
|
|
|
/*
|
|
* Clock source
|
|
*/
|
|
#define CLOCKING_SLAVE 0
|
|
#define CLOCKING_MASTER 1
|
|
|
|
/*
|
|
* Framing
|
|
*/
|
|
#define FRAMING_E1 0
|
|
#define FRAMING_J1 1
|
|
#define FRAMING_T1 2
|
|
|
|
/*
|
|
* Structure
|
|
*/
|
|
#define STRUCTURE_UNFRAMED 0
|
|
#define STRUCTURE_E1_DOUBLE 1
|
|
#define STRUCTURE_E1_CRC4 2
|
|
#define STRUCTURE_E1_CRC4M 3
|
|
#define STRUCTURE_T1_4 4
|
|
#define STRUCTURE_T1_12 5
|
|
#define STRUCTURE_T1_24 6
|
|
#define STRUCTURE_T1_72 7
|
|
|
|
/*
|
|
* Interface
|
|
*/
|
|
#define INTERFACE_RJ48C 0
|
|
#define INTERFACE_BNC 1
|
|
|
|
/*
|
|
* Coding
|
|
*/
|
|
|
|
#define CODING_HDB3 0
|
|
#define CODING_NRZ 1
|
|
#define CODING_CMI 2
|
|
#define CODING_CMI_HDB3 3
|
|
#define CODING_CMI_B8ZS 4
|
|
#define CODING_AMI 5
|
|
#define CODING_AMI_ZCS 6
|
|
#define CODING_B8ZS 7
|
|
|
|
/*
|
|
* Line Build Out
|
|
*/
|
|
#define LBO_0dB 0
|
|
#define LBO_7dB5 1
|
|
#define LBO_15dB 2
|
|
#define LBO_22dB5 3
|
|
|
|
/*
|
|
* Range for long haul t1 > 655ft
|
|
*/
|
|
#define RANGE_0_133_FT 0
|
|
#define RANGE_0_40_M RANGE_0_133_FT
|
|
#define RANGE_133_266_FT 1
|
|
#define RANGE_40_81_M RANGE_133_266_FT
|
|
#define RANGE_266_399_FT 2
|
|
#define RANGE_81_122_M RANGE_266_399_FT
|
|
#define RANGE_399_533_FT 3
|
|
#define RANGE_122_162_M RANGE_399_533_FT
|
|
#define RANGE_533_655_FT 4
|
|
#define RANGE_162_200_M RANGE_533_655_FT
|
|
/*
|
|
* Receive Equaliser
|
|
*/
|
|
#define EQUALIZER_SHORT 0
|
|
#define EQUALIZER_LONG 1
|
|
|
|
/*
|
|
* Loop modes
|
|
*/
|
|
#define LOOP_NONE 0
|
|
#define LOOP_LOCAL 1
|
|
#define LOOP_PAYLOAD_EXC_TS0 2
|
|
#define LOOP_PAYLOAD_INC_TS0 3
|
|
#define LOOP_REMOTE 4
|
|
|
|
/*
|
|
* Buffer modes
|
|
*/
|
|
#define BUFFER_2_FRAME 0
|
|
#define BUFFER_1_FRAME 1
|
|
#define BUFFER_96_BIT 2
|
|
#define BUFFER_NONE 3
|
|
|
|
/* Debug support
|
|
*
|
|
* These should only be enabled for development kernels, production code
|
|
* should define FST_DEBUG=0 in order to exclude the code.
|
|
* Setting FST_DEBUG=1 will include all the debug code but in a disabled
|
|
* state, use the FSTSETCONF ioctl to enable specific debug actions, or
|
|
* FST_DEBUG can be set to prime the debug selection.
|
|
*/
|
|
#define FST_DEBUG 0x0000
|
|
#if FST_DEBUG
|
|
|
|
extern int fst_debug_mask; /* Bit mask of actions to debug, bits
|
|
* listed below. Note: Bit 0 is used
|
|
* to trigger the inclusion of this
|
|
* code, without enabling any actions.
|
|
*/
|
|
#define DBG_INIT 0x0002 /* Card detection and initialisation */
|
|
#define DBG_OPEN 0x0004 /* Open and close sequences */
|
|
#define DBG_PCI 0x0008 /* PCI config operations */
|
|
#define DBG_IOCTL 0x0010 /* Ioctls and other config */
|
|
#define DBG_INTR 0x0020 /* Interrupt routines (be careful) */
|
|
#define DBG_TX 0x0040 /* Packet transmission */
|
|
#define DBG_RX 0x0080 /* Packet reception */
|
|
#define DBG_CMD 0x0100 /* Port command issuing */
|
|
|
|
#define DBG_ASS 0xFFFF /* Assert like statements. Code that
|
|
* should never be reached, if you see
|
|
* one of these then I've been an ass
|
|
*/
|
|
#endif /* FST_DEBUG */
|
|
|