kernel_optimize_test/drivers/phy
Miquel Raynal 0629d57bbd phy: mvebu-cp110-comphy: Add clocks support
There is no public clock tree that implies such dependencies between
the MG/MG-core/AXI clocks and the COMPHY IP but accessing the COMPHY
registers while one of the three clocks are disabled stalls the CPU.

This happens if, for instance, the COMPHY driver probe is deferred
(eg. the USB Vbus regulator driver is not yet visible). The MVPP2
driver which also needs these clocks (among others) will
prepare/enable the clocks, then be deferred, and disable/unprepare
them. Next COMPHY lane to be configured would produce an infinite
stall.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-08-27 11:37:09 +05:30
..
allwinner treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
amlogic phy: for 5.3 2019-07-01 15:04:59 +02:00
broadcom phy: for 5.3 2019-07-01 15:04:59 +02:00
cadence treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
freescale phy: for 5.3 2019-07-01 15:04:59 +02:00
hisilicon treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
lantiq phy: lantiq: vrx200-pcie: add a driver for the Lantiq VRX200 PCIe PHY 2019-08-23 09:40:48 +05:30
marvell phy: mvebu-cp110-comphy: Add clocks support 2019-08-27 11:37:09 +05:30
mediatek treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
motorola treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
mscc treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
qualcomm phy: qcom-qmp: Correct ready status, again 2019-08-26 17:20:04 +05:30
ralink treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
renesas phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current 2019-08-26 17:20:02 +05:30
rockchip phy-rockchip-inno-hdmi: Fix RK3328_TERM_RESISTOR_CALIB_SPEED_7_0's third value 2019-08-27 11:36:36 +05:30
samsung phy: samsung: disable bind/unbind platform driver feature 2019-08-23 09:40:59 +05:30
socionext treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
st treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
tegra phy: for 5.2-rc 2019-07-01 12:11:43 +02:00
ti phy: ti: am654-serdes: fix an use-after-free in serdes_am654_clk_register() 2019-08-26 17:20:01 +05:30
Kconfig treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Makefile phy: enable compile-testing for the Lantiq PHY drivers 2019-08-23 09:40:51 +05:30
phy-core-mipi-dphy.c phy: dphy: Change units of wakeup and init parameters 2019-02-07 11:11:05 +05:30
phy-core.c phy: core: document phy_calibrate() 2019-08-23 09:40:57 +05:30
phy-lpc18xx-usb-otg.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
phy-pistachio-usb.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422 2019-06-05 17:37:15 +02:00
phy-xgene.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 2019-05-21 11:28:45 +02:00