forked from luck/tmp_suning_uos_patched
6aa2f9441f
CORE: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. NEW DRIVERS: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. OTHER IMPROVEMENTS: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaCvGiAAoJEEEQszewGV1z+oAQAJUpdPH/msdgHDuXSuBcbuFq NObQdkRiz1hez4vJOT+kbgES6ay57MArnbmM/xRdy+37lKrmkP+yfZe4UUruQhhW f2GVlwBbUp9tIzNliS8IYWO0tj+BTYyg1MQx0C0nE1zMZqVZk44EDa9SO6esRaFJ SLc2BpO3oJCQRaObe0+KTHIJV0dK3vQh4QXSzL+cM5u7P67Jq+wv4xdLVVScwbJB 4jgwVER3Ah0E1jHclIG2PxI1rbYKwlOBumafOTUlq5fmfC3tULVPJEm9FXcdaBLJ KAmtxX4yi+SgUccYFsmK+fNNLVQiAjmkhJCl6kxVOrxYqamrG100YST4Iew3sakM /iQ3lpup5L6eJ/dndfgE207OqRFhvAzNRxORv1p/wJIRLmV1/QehCX8GYOcDumXY MySRcEeUeZPfBHcnjIDRP6y/XOg8zBKso7GL+feRgLZUJZlNQZqokdC95TY9S5nm QLK+sU367o41tomyv5TP3y1DDsym6+ZdpuOUh73znxuz2x/x+FfTfwM2J0r8Ussm GQTfAojeBI9aSOZ2mvgRI1XxSprXqO3FFFWBwrQ6RS9rBceLF1o2ySKC2gI0FG5d 6GBkARcN5RyyNtYkH923pyrqz/FZJc6ZkrsUTGmERM5HGuWwczcditqwYRhbHwl8 pIlmX4y0AYh6FFVoIcQE =8Mon -----END PGP SIGNATURE----- Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
302 lines
7.2 KiB
C
302 lines
7.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef _LINUX_BITOPS_H
|
|
#define _LINUX_BITOPS_H
|
|
#include <asm/types.h>
|
|
|
|
#ifdef __KERNEL__
|
|
#define BIT(nr) (1UL << (nr))
|
|
#define BIT_ULL(nr) (1ULL << (nr))
|
|
#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG))
|
|
#define BIT_WORD(nr) ((nr) / BITS_PER_LONG)
|
|
#define BIT_ULL_MASK(nr) (1ULL << ((nr) % BITS_PER_LONG_LONG))
|
|
#define BIT_ULL_WORD(nr) ((nr) / BITS_PER_LONG_LONG)
|
|
#define BITS_PER_BYTE 8
|
|
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
|
|
#endif
|
|
|
|
/*
|
|
* Create a contiguous bitmask starting at bit position @l and ending at
|
|
* position @h. For example
|
|
* GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
|
|
*/
|
|
#define GENMASK(h, l) \
|
|
(((~0UL) - (1UL << (l)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
|
|
|
|
#define GENMASK_ULL(h, l) \
|
|
(((~0ULL) - (1ULL << (l)) + 1) & \
|
|
(~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
|
|
|
|
extern unsigned int __sw_hweight8(unsigned int w);
|
|
extern unsigned int __sw_hweight16(unsigned int w);
|
|
extern unsigned int __sw_hweight32(unsigned int w);
|
|
extern unsigned long __sw_hweight64(__u64 w);
|
|
|
|
/*
|
|
* Include this here because some architectures need generic_ffs/fls in
|
|
* scope
|
|
*/
|
|
#include <asm/bitops.h>
|
|
|
|
#define for_each_set_bit(bit, addr, size) \
|
|
for ((bit) = find_first_bit((addr), (size)); \
|
|
(bit) < (size); \
|
|
(bit) = find_next_bit((addr), (size), (bit) + 1))
|
|
|
|
/* same as for_each_set_bit() but use bit as value to start with */
|
|
#define for_each_set_bit_from(bit, addr, size) \
|
|
for ((bit) = find_next_bit((addr), (size), (bit)); \
|
|
(bit) < (size); \
|
|
(bit) = find_next_bit((addr), (size), (bit) + 1))
|
|
|
|
#define for_each_clear_bit(bit, addr, size) \
|
|
for ((bit) = find_first_zero_bit((addr), (size)); \
|
|
(bit) < (size); \
|
|
(bit) = find_next_zero_bit((addr), (size), (bit) + 1))
|
|
|
|
/* same as for_each_clear_bit() but use bit as value to start with */
|
|
#define for_each_clear_bit_from(bit, addr, size) \
|
|
for ((bit) = find_next_zero_bit((addr), (size), (bit)); \
|
|
(bit) < (size); \
|
|
(bit) = find_next_zero_bit((addr), (size), (bit) + 1))
|
|
|
|
static inline int get_bitmask_order(unsigned int count)
|
|
{
|
|
int order;
|
|
|
|
order = fls(count);
|
|
return order; /* We could be slightly more clever with -1 here... */
|
|
}
|
|
|
|
static __always_inline unsigned long hweight_long(unsigned long w)
|
|
{
|
|
return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
|
|
}
|
|
|
|
/**
|
|
* rol64 - rotate a 64-bit value left
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u64 rol64(__u64 word, unsigned int shift)
|
|
{
|
|
return (word << shift) | (word >> (64 - shift));
|
|
}
|
|
|
|
/**
|
|
* ror64 - rotate a 64-bit value right
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u64 ror64(__u64 word, unsigned int shift)
|
|
{
|
|
return (word >> shift) | (word << (64 - shift));
|
|
}
|
|
|
|
/**
|
|
* rol32 - rotate a 32-bit value left
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u32 rol32(__u32 word, unsigned int shift)
|
|
{
|
|
return (word << shift) | (word >> ((-shift) & 31));
|
|
}
|
|
|
|
/**
|
|
* ror32 - rotate a 32-bit value right
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u32 ror32(__u32 word, unsigned int shift)
|
|
{
|
|
return (word >> shift) | (word << (32 - shift));
|
|
}
|
|
|
|
/**
|
|
* rol16 - rotate a 16-bit value left
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u16 rol16(__u16 word, unsigned int shift)
|
|
{
|
|
return (word << shift) | (word >> (16 - shift));
|
|
}
|
|
|
|
/**
|
|
* ror16 - rotate a 16-bit value right
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u16 ror16(__u16 word, unsigned int shift)
|
|
{
|
|
return (word >> shift) | (word << (16 - shift));
|
|
}
|
|
|
|
/**
|
|
* rol8 - rotate an 8-bit value left
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u8 rol8(__u8 word, unsigned int shift)
|
|
{
|
|
return (word << shift) | (word >> (8 - shift));
|
|
}
|
|
|
|
/**
|
|
* ror8 - rotate an 8-bit value right
|
|
* @word: value to rotate
|
|
* @shift: bits to roll
|
|
*/
|
|
static inline __u8 ror8(__u8 word, unsigned int shift)
|
|
{
|
|
return (word >> shift) | (word << (8 - shift));
|
|
}
|
|
|
|
/**
|
|
* sign_extend32 - sign extend a 32-bit value using specified bit as sign-bit
|
|
* @value: value to sign extend
|
|
* @index: 0 based bit index (0<=index<32) to sign bit
|
|
*
|
|
* This is safe to use for 16- and 8-bit types as well.
|
|
*/
|
|
static inline __s32 sign_extend32(__u32 value, int index)
|
|
{
|
|
__u8 shift = 31 - index;
|
|
return (__s32)(value << shift) >> shift;
|
|
}
|
|
|
|
/**
|
|
* sign_extend64 - sign extend a 64-bit value using specified bit as sign-bit
|
|
* @value: value to sign extend
|
|
* @index: 0 based bit index (0<=index<64) to sign bit
|
|
*/
|
|
static inline __s64 sign_extend64(__u64 value, int index)
|
|
{
|
|
__u8 shift = 63 - index;
|
|
return (__s64)(value << shift) >> shift;
|
|
}
|
|
|
|
static inline unsigned fls_long(unsigned long l)
|
|
{
|
|
if (sizeof(l) == 4)
|
|
return fls(l);
|
|
return fls64(l);
|
|
}
|
|
|
|
static inline int get_count_order(unsigned int count)
|
|
{
|
|
int order;
|
|
|
|
order = fls(count) - 1;
|
|
if (count & (count - 1))
|
|
order++;
|
|
return order;
|
|
}
|
|
|
|
/**
|
|
* get_count_order_long - get order after rounding @l up to power of 2
|
|
* @l: parameter
|
|
*
|
|
* it is same as get_count_order() but with long type parameter
|
|
*/
|
|
static inline int get_count_order_long(unsigned long l)
|
|
{
|
|
if (l == 0UL)
|
|
return -1;
|
|
else if (l & (l - 1UL))
|
|
return (int)fls_long(l);
|
|
else
|
|
return (int)fls_long(l) - 1;
|
|
}
|
|
|
|
/**
|
|
* __ffs64 - find first set bit in a 64 bit word
|
|
* @word: The 64 bit word
|
|
*
|
|
* On 64 bit arches this is a synomyn for __ffs
|
|
* The result is not defined if no bits are set, so check that @word
|
|
* is non-zero before calling this.
|
|
*/
|
|
static inline unsigned long __ffs64(u64 word)
|
|
{
|
|
#if BITS_PER_LONG == 32
|
|
if (((u32)word) == 0UL)
|
|
return __ffs((u32)(word >> 32)) + 32;
|
|
#elif BITS_PER_LONG != 64
|
|
#error BITS_PER_LONG not 32 or 64
|
|
#endif
|
|
return __ffs((unsigned long)word);
|
|
}
|
|
|
|
/**
|
|
* assign_bit - Assign value to a bit in memory
|
|
* @nr: the bit to set
|
|
* @addr: the address to start counting from
|
|
* @value: the value to assign
|
|
*/
|
|
static __always_inline void assign_bit(long nr, volatile unsigned long *addr,
|
|
bool value)
|
|
{
|
|
if (value)
|
|
set_bit(nr, addr);
|
|
else
|
|
clear_bit(nr, addr);
|
|
}
|
|
|
|
static __always_inline void __assign_bit(long nr, volatile unsigned long *addr,
|
|
bool value)
|
|
{
|
|
if (value)
|
|
__set_bit(nr, addr);
|
|
else
|
|
__clear_bit(nr, addr);
|
|
}
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#ifndef set_mask_bits
|
|
#define set_mask_bits(ptr, _mask, _bits) \
|
|
({ \
|
|
const typeof(*ptr) mask = (_mask), bits = (_bits); \
|
|
typeof(*ptr) old, new; \
|
|
\
|
|
do { \
|
|
old = READ_ONCE(*ptr); \
|
|
new = (old & ~mask) | bits; \
|
|
} while (cmpxchg(ptr, old, new) != old); \
|
|
\
|
|
new; \
|
|
})
|
|
#endif
|
|
|
|
#ifndef bit_clear_unless
|
|
#define bit_clear_unless(ptr, _clear, _test) \
|
|
({ \
|
|
const typeof(*ptr) clear = (_clear), test = (_test); \
|
|
typeof(*ptr) old, new; \
|
|
\
|
|
do { \
|
|
old = READ_ONCE(*ptr); \
|
|
new = old & ~clear; \
|
|
} while (!(old & test) && \
|
|
cmpxchg(ptr, old, new) != old); \
|
|
\
|
|
!(old & test); \
|
|
})
|
|
#endif
|
|
|
|
#ifndef find_last_bit
|
|
/**
|
|
* find_last_bit - find the last set bit in a memory region
|
|
* @addr: The address to start the search at
|
|
* @size: The number of bits to search
|
|
*
|
|
* Returns the bit number of the last set bit, or size.
|
|
*/
|
|
extern unsigned long find_last_bit(const unsigned long *addr,
|
|
unsigned long size);
|
|
#endif
|
|
|
|
#endif /* __KERNEL__ */
|
|
#endif
|