forked from luck/tmp_suning_uos_patched
0fc6a323e1
Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA devices). If board has a serial flash, it's connected over SPI and the bcma bus includes a SPI controller. Example log from such a board: bus0: Found chip with id 53010, rev 0x00 and package 0x02 (...) bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) This patch adds a bcma driver for SPI core, it registers SPI master controller and "bcm53xxspiflash" SPI device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
73 lines
2.6 KiB
C
73 lines
2.6 KiB
C
#ifndef SPI_BCM53XX_H
|
|
#define SPI_BCM53XX_H
|
|
|
|
#define B53SPI_BSPI_REVISION_ID 0x000
|
|
#define B53SPI_BSPI_SCRATCH 0x004
|
|
#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008
|
|
#define B53SPI_BSPI_BUSY_STATUS 0x00c
|
|
#define B53SPI_BSPI_INTR_STATUS 0x010
|
|
#define B53SPI_BSPI_B0_STATUS 0x014
|
|
#define B53SPI_BSPI_B0_CTRL 0x018
|
|
#define B53SPI_BSPI_B1_STATUS 0x01c
|
|
#define B53SPI_BSPI_B1_CTRL 0x020
|
|
#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024
|
|
#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028
|
|
#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c
|
|
#define B53SPI_BSPI_BITS_PER_PHASE 0x030
|
|
#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034
|
|
#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
|
|
#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c
|
|
#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040
|
|
#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044
|
|
#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048
|
|
#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c
|
|
|
|
/* RAF */
|
|
#define B53SPI_RAF_START_ADDR 0x100
|
|
#define B53SPI_RAF_NUM_WORDS 0x104
|
|
#define B53SPI_RAF_CTRL 0x108
|
|
#define B53SPI_RAF_FULLNESS 0x10c
|
|
#define B53SPI_RAF_WATERMARK 0x110
|
|
#define B53SPI_RAF_STATUS 0x114
|
|
#define B53SPI_RAF_READ_DATA 0x118
|
|
#define B53SPI_RAF_WORD_CNT 0x11c
|
|
#define B53SPI_RAF_CURR_ADDR 0x120
|
|
|
|
/* MSPI */
|
|
#define B53SPI_MSPI_SPCR0_LSB 0x200
|
|
#define B53SPI_MSPI_SPCR0_MSB 0x204
|
|
#define B53SPI_MSPI_SPCR1_LSB 0x208
|
|
#define B53SPI_MSPI_SPCR1_MSB 0x20c
|
|
#define B53SPI_MSPI_NEWQP 0x210
|
|
#define B53SPI_MSPI_ENDQP 0x214
|
|
#define B53SPI_MSPI_SPCR2 0x218
|
|
#define B53SPI_MSPI_SPCR2_SPE 0x00000040
|
|
#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
|
|
#define B53SPI_MSPI_MSPI_STATUS 0x220
|
|
#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001
|
|
#define B53SPI_MSPI_CPTQP 0x224
|
|
#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */
|
|
#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */
|
|
#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */
|
|
#define B53SPI_CDRAM_PCS_PCS0 0x00000001
|
|
#define B53SPI_CDRAM_PCS_PCS1 0x00000002
|
|
#define B53SPI_CDRAM_PCS_PCS2 0x00000004
|
|
#define B53SPI_CDRAM_PCS_PCS3 0x00000008
|
|
#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f
|
|
#define B53SPI_CDRAM_PCS_DSCK 0x00000010
|
|
#define B53SPI_CDRAM_BITSE 0x00000040
|
|
#define B53SPI_CDRAM_CONT 0x00000080
|
|
#define B53SPI_MSPI_WRITE_LOCK 0x380
|
|
#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384
|
|
|
|
/* Interrupt */
|
|
#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0
|
|
#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4
|
|
#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8
|
|
#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac
|
|
#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0
|
|
#define B53SPI_INTR_MSPI_DONE 0x3b4
|
|
#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
|
|
|
|
#endif /* SPI_BCM53XX_H */
|