forked from luck/tmp_suning_uos_patched
3601fe43e8
Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip support a "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcgoLEAAoJEEEQszewGV1zjBAP/3OmTFGv49PFmJwSx+PlLiYf V6/UPaQzq81CGSMtHxbS51TyP9Id7PCfsacbuFYutzn0D1efvl7jrkb8qJ6fVvCM bl/i6q8ipRTPzAf1hD3QCgCe3BXCA064/OcPrz987oIvI3bJQXsmBjBSXHWr4Cwa WfB5DX/afn9TK3XHhMQGfw5f0d+TtnKAs90RTTVKiz9Ow8eFYZJOhgPkvhCR3Gi9 YJIzIAiwhHZ7/zauo4JAYFU/O/Z3YEC5zeLne2ItebzNooRkSxdz0c9Hs7HlCZmU 930Uv9jNN89N3vPqpZzAHtPvwDOmAILMWvKy9xRSp+eoIukarRJgF7ALPk7QWxK1 yy+tGj4dXBQ6tI8W3wUN1WgjNpii3K1HbJ+1LQVQL2/q9o+3YXXqmjdjuw7C8YYV 5ystNrUppkgfIIciHL4lhqw3wKJJhVEAns2V245hIitoShT+RvIg8GQbGZmWlQFd YsHbynqHL9iwfRNv26kEqZXZOo/4D1t6Scw+OPVyba2Wyttf+qbmg+XaYMqFaxYW mfydvdtymeCOUIPJMzw58KGPUTXJ4UPLENyayXNUHokr1a8VO8OIthY7zwi0CpvJ IcsAY9zoGxvfbRV922mlIsw3oOBcM2IN2lC9sY469ZVnjBrdC3rsQpIBZr+Vzz8i YlUfXLSGSyuUZUz//2eG =VoVC -----END PGP SIGNATURE----- Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
1798 lines
49 KiB
C
1798 lines
49 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
#define pr_fmt(fmt) "irq: " fmt
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/topology.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/fs.h>
|
|
|
|
static LIST_HEAD(irq_domain_list);
|
|
static DEFINE_MUTEX(irq_domain_mutex);
|
|
|
|
static struct irq_domain *irq_default_domain;
|
|
|
|
static void irq_domain_check_hierarchy(struct irq_domain *domain);
|
|
|
|
struct irqchip_fwid {
|
|
struct fwnode_handle fwnode;
|
|
unsigned int type;
|
|
char *name;
|
|
void *data;
|
|
};
|
|
|
|
#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
|
|
static void debugfs_add_domain_dir(struct irq_domain *d);
|
|
static void debugfs_remove_domain_dir(struct irq_domain *d);
|
|
#else
|
|
static inline void debugfs_add_domain_dir(struct irq_domain *d) { }
|
|
static inline void debugfs_remove_domain_dir(struct irq_domain *d) { }
|
|
#endif
|
|
|
|
const struct fwnode_operations irqchip_fwnode_ops;
|
|
EXPORT_SYMBOL_GPL(irqchip_fwnode_ops);
|
|
|
|
/**
|
|
* irq_domain_alloc_fwnode - Allocate a fwnode_handle suitable for
|
|
* identifying an irq domain
|
|
* @type: Type of irqchip_fwnode. See linux/irqdomain.h
|
|
* @name: Optional user provided domain name
|
|
* @id: Optional user provided id if name != NULL
|
|
* @data: Optional user-provided data
|
|
*
|
|
* Allocate a struct irqchip_fwid, and return a poiner to the embedded
|
|
* fwnode_handle (or NULL on failure).
|
|
*
|
|
* Note: The types IRQCHIP_FWNODE_NAMED and IRQCHIP_FWNODE_NAMED_ID are
|
|
* solely to transport name information to irqdomain creation code. The
|
|
* node is not stored. For other types the pointer is kept in the irq
|
|
* domain struct.
|
|
*/
|
|
struct fwnode_handle *__irq_domain_alloc_fwnode(unsigned int type, int id,
|
|
const char *name, void *data)
|
|
{
|
|
struct irqchip_fwid *fwid;
|
|
char *n;
|
|
|
|
fwid = kzalloc(sizeof(*fwid), GFP_KERNEL);
|
|
|
|
switch (type) {
|
|
case IRQCHIP_FWNODE_NAMED:
|
|
n = kasprintf(GFP_KERNEL, "%s", name);
|
|
break;
|
|
case IRQCHIP_FWNODE_NAMED_ID:
|
|
n = kasprintf(GFP_KERNEL, "%s-%d", name, id);
|
|
break;
|
|
default:
|
|
n = kasprintf(GFP_KERNEL, "irqchip@%p", data);
|
|
break;
|
|
}
|
|
|
|
if (!fwid || !n) {
|
|
kfree(fwid);
|
|
kfree(n);
|
|
return NULL;
|
|
}
|
|
|
|
fwid->type = type;
|
|
fwid->name = n;
|
|
fwid->data = data;
|
|
fwid->fwnode.ops = &irqchip_fwnode_ops;
|
|
return &fwid->fwnode;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__irq_domain_alloc_fwnode);
|
|
|
|
/**
|
|
* irq_domain_free_fwnode - Free a non-OF-backed fwnode_handle
|
|
*
|
|
* Free a fwnode_handle allocated with irq_domain_alloc_fwnode.
|
|
*/
|
|
void irq_domain_free_fwnode(struct fwnode_handle *fwnode)
|
|
{
|
|
struct irqchip_fwid *fwid;
|
|
|
|
if (WARN_ON(!is_fwnode_irqchip(fwnode)))
|
|
return;
|
|
|
|
fwid = container_of(fwnode, struct irqchip_fwid, fwnode);
|
|
kfree(fwid->name);
|
|
kfree(fwid);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_free_fwnode);
|
|
|
|
/**
|
|
* __irq_domain_add() - Allocate a new irq_domain data structure
|
|
* @fwnode: firmware node for the interrupt controller
|
|
* @size: Size of linear map; 0 for radix mapping only
|
|
* @hwirq_max: Maximum number of interrupts supported by controller
|
|
* @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
|
|
* direct mapping
|
|
* @ops: domain callbacks
|
|
* @host_data: Controller private data pointer
|
|
*
|
|
* Allocates and initialize and irq_domain structure.
|
|
* Returns pointer to IRQ domain, or NULL on failure.
|
|
*/
|
|
struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
|
|
irq_hw_number_t hwirq_max, int direct_max,
|
|
const struct irq_domain_ops *ops,
|
|
void *host_data)
|
|
{
|
|
struct device_node *of_node = to_of_node(fwnode);
|
|
struct irqchip_fwid *fwid;
|
|
struct irq_domain *domain;
|
|
|
|
static atomic_t unknown_domains;
|
|
|
|
domain = kzalloc_node(sizeof(*domain) + (sizeof(unsigned int) * size),
|
|
GFP_KERNEL, of_node_to_nid(of_node));
|
|
if (WARN_ON(!domain))
|
|
return NULL;
|
|
|
|
if (fwnode && is_fwnode_irqchip(fwnode)) {
|
|
fwid = container_of(fwnode, struct irqchip_fwid, fwnode);
|
|
|
|
switch (fwid->type) {
|
|
case IRQCHIP_FWNODE_NAMED:
|
|
case IRQCHIP_FWNODE_NAMED_ID:
|
|
domain->name = kstrdup(fwid->name, GFP_KERNEL);
|
|
if (!domain->name) {
|
|
kfree(domain);
|
|
return NULL;
|
|
}
|
|
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
|
|
break;
|
|
default:
|
|
domain->fwnode = fwnode;
|
|
domain->name = fwid->name;
|
|
break;
|
|
}
|
|
#ifdef CONFIG_ACPI
|
|
} else if (is_acpi_device_node(fwnode)) {
|
|
struct acpi_buffer buf = {
|
|
.length = ACPI_ALLOCATE_BUFFER,
|
|
};
|
|
acpi_handle handle;
|
|
|
|
handle = acpi_device_handle(to_acpi_device_node(fwnode));
|
|
if (acpi_get_name(handle, ACPI_FULL_PATHNAME, &buf) == AE_OK) {
|
|
domain->name = buf.pointer;
|
|
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
|
|
}
|
|
|
|
domain->fwnode = fwnode;
|
|
#endif
|
|
} else if (of_node) {
|
|
char *name;
|
|
|
|
/*
|
|
* DT paths contain '/', which debugfs is legitimately
|
|
* unhappy about. Replace them with ':', which does
|
|
* the trick and is not as offensive as '\'...
|
|
*/
|
|
name = kasprintf(GFP_KERNEL, "%pOF", of_node);
|
|
if (!name) {
|
|
kfree(domain);
|
|
return NULL;
|
|
}
|
|
|
|
strreplace(name, '/', ':');
|
|
|
|
domain->name = name;
|
|
domain->fwnode = fwnode;
|
|
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
|
|
}
|
|
|
|
if (!domain->name) {
|
|
if (fwnode)
|
|
pr_err("Invalid fwnode type for irqdomain\n");
|
|
domain->name = kasprintf(GFP_KERNEL, "unknown-%d",
|
|
atomic_inc_return(&unknown_domains));
|
|
if (!domain->name) {
|
|
kfree(domain);
|
|
return NULL;
|
|
}
|
|
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
|
|
}
|
|
|
|
of_node_get(of_node);
|
|
|
|
/* Fill structure */
|
|
INIT_RADIX_TREE(&domain->revmap_tree, GFP_KERNEL);
|
|
mutex_init(&domain->revmap_tree_mutex);
|
|
domain->ops = ops;
|
|
domain->host_data = host_data;
|
|
domain->hwirq_max = hwirq_max;
|
|
domain->revmap_size = size;
|
|
domain->revmap_direct_max_irq = direct_max;
|
|
irq_domain_check_hierarchy(domain);
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
debugfs_add_domain_dir(domain);
|
|
list_add(&domain->link, &irq_domain_list);
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
pr_debug("Added domain %s\n", domain->name);
|
|
return domain;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__irq_domain_add);
|
|
|
|
/**
|
|
* irq_domain_remove() - Remove an irq domain.
|
|
* @domain: domain to remove
|
|
*
|
|
* This routine is used to remove an irq domain. The caller must ensure
|
|
* that all mappings within the domain have been disposed of prior to
|
|
* use, depending on the revmap type.
|
|
*/
|
|
void irq_domain_remove(struct irq_domain *domain)
|
|
{
|
|
mutex_lock(&irq_domain_mutex);
|
|
debugfs_remove_domain_dir(domain);
|
|
|
|
WARN_ON(!radix_tree_empty(&domain->revmap_tree));
|
|
|
|
list_del(&domain->link);
|
|
|
|
/*
|
|
* If the going away domain is the default one, reset it.
|
|
*/
|
|
if (unlikely(irq_default_domain == domain))
|
|
irq_set_default_host(NULL);
|
|
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
pr_debug("Removed domain %s\n", domain->name);
|
|
|
|
of_node_put(irq_domain_get_of_node(domain));
|
|
if (domain->flags & IRQ_DOMAIN_NAME_ALLOCATED)
|
|
kfree(domain->name);
|
|
kfree(domain);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_remove);
|
|
|
|
void irq_domain_update_bus_token(struct irq_domain *domain,
|
|
enum irq_domain_bus_token bus_token)
|
|
{
|
|
char *name;
|
|
|
|
if (domain->bus_token == bus_token)
|
|
return;
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
|
|
domain->bus_token = bus_token;
|
|
|
|
name = kasprintf(GFP_KERNEL, "%s-%d", domain->name, bus_token);
|
|
if (!name) {
|
|
mutex_unlock(&irq_domain_mutex);
|
|
return;
|
|
}
|
|
|
|
debugfs_remove_domain_dir(domain);
|
|
|
|
if (domain->flags & IRQ_DOMAIN_NAME_ALLOCATED)
|
|
kfree(domain->name);
|
|
else
|
|
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
|
|
|
|
domain->name = name;
|
|
debugfs_add_domain_dir(domain);
|
|
|
|
mutex_unlock(&irq_domain_mutex);
|
|
}
|
|
|
|
/**
|
|
* irq_domain_add_simple() - Register an irq_domain and optionally map a range of irqs
|
|
* @of_node: pointer to interrupt controller's device tree node.
|
|
* @size: total number of irqs in mapping
|
|
* @first_irq: first number of irq block assigned to the domain,
|
|
* pass zero to assign irqs on-the-fly. If first_irq is non-zero, then
|
|
* pre-map all of the irqs in the domain to virqs starting at first_irq.
|
|
* @ops: domain callbacks
|
|
* @host_data: Controller private data pointer
|
|
*
|
|
* Allocates an irq_domain, and optionally if first_irq is positive then also
|
|
* allocate irq_descs and map all of the hwirqs to virqs starting at first_irq.
|
|
*
|
|
* This is intended to implement the expected behaviour for most
|
|
* interrupt controllers. If device tree is used, then first_irq will be 0 and
|
|
* irqs get mapped dynamically on the fly. However, if the controller requires
|
|
* static virq assignments (non-DT boot) then it will set that up correctly.
|
|
*/
|
|
struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
|
|
unsigned int size,
|
|
unsigned int first_irq,
|
|
const struct irq_domain_ops *ops,
|
|
void *host_data)
|
|
{
|
|
struct irq_domain *domain;
|
|
|
|
domain = __irq_domain_add(of_node_to_fwnode(of_node), size, size, 0, ops, host_data);
|
|
if (!domain)
|
|
return NULL;
|
|
|
|
if (first_irq > 0) {
|
|
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
|
|
/* attempt to allocated irq_descs */
|
|
int rc = irq_alloc_descs(first_irq, first_irq, size,
|
|
of_node_to_nid(of_node));
|
|
if (rc < 0)
|
|
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
|
|
first_irq);
|
|
}
|
|
irq_domain_associate_many(domain, first_irq, 0, size);
|
|
}
|
|
|
|
return domain;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_add_simple);
|
|
|
|
/**
|
|
* irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
|
|
* @of_node: pointer to interrupt controller's device tree node.
|
|
* @size: total number of irqs in legacy mapping
|
|
* @first_irq: first number of irq block assigned to the domain
|
|
* @first_hwirq: first hwirq number to use for the translation. Should normally
|
|
* be '0', but a positive integer can be used if the effective
|
|
* hwirqs numbering does not begin at zero.
|
|
* @ops: map/unmap domain callbacks
|
|
* @host_data: Controller private data pointer
|
|
*
|
|
* Note: the map() callback will be called before this function returns
|
|
* for all legacy interrupts except 0 (which is always the invalid irq for
|
|
* a legacy controller).
|
|
*/
|
|
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
|
|
unsigned int size,
|
|
unsigned int first_irq,
|
|
irq_hw_number_t first_hwirq,
|
|
const struct irq_domain_ops *ops,
|
|
void *host_data)
|
|
{
|
|
struct irq_domain *domain;
|
|
|
|
domain = __irq_domain_add(of_node_to_fwnode(of_node), first_hwirq + size,
|
|
first_hwirq + size, 0, ops, host_data);
|
|
if (domain)
|
|
irq_domain_associate_many(domain, first_irq, first_hwirq, size);
|
|
|
|
return domain;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_add_legacy);
|
|
|
|
/**
|
|
* irq_find_matching_fwspec() - Locates a domain for a given fwspec
|
|
* @fwspec: FW specifier for an interrupt
|
|
* @bus_token: domain-specific data
|
|
*/
|
|
struct irq_domain *irq_find_matching_fwspec(struct irq_fwspec *fwspec,
|
|
enum irq_domain_bus_token bus_token)
|
|
{
|
|
struct irq_domain *h, *found = NULL;
|
|
struct fwnode_handle *fwnode = fwspec->fwnode;
|
|
int rc;
|
|
|
|
/* We might want to match the legacy controller last since
|
|
* it might potentially be set to match all interrupts in
|
|
* the absence of a device node. This isn't a problem so far
|
|
* yet though...
|
|
*
|
|
* bus_token == DOMAIN_BUS_ANY matches any domain, any other
|
|
* values must generate an exact match for the domain to be
|
|
* selected.
|
|
*/
|
|
mutex_lock(&irq_domain_mutex);
|
|
list_for_each_entry(h, &irq_domain_list, link) {
|
|
if (h->ops->select && fwspec->param_count)
|
|
rc = h->ops->select(h, fwspec, bus_token);
|
|
else if (h->ops->match)
|
|
rc = h->ops->match(h, to_of_node(fwnode), bus_token);
|
|
else
|
|
rc = ((fwnode != NULL) && (h->fwnode == fwnode) &&
|
|
((bus_token == DOMAIN_BUS_ANY) ||
|
|
(h->bus_token == bus_token)));
|
|
|
|
if (rc) {
|
|
found = h;
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&irq_domain_mutex);
|
|
return found;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_find_matching_fwspec);
|
|
|
|
/**
|
|
* irq_domain_check_msi_remap - Check whether all MSI irq domains implement
|
|
* IRQ remapping
|
|
*
|
|
* Return: false if any MSI irq domain does not support IRQ remapping,
|
|
* true otherwise (including if there is no MSI irq domain)
|
|
*/
|
|
bool irq_domain_check_msi_remap(void)
|
|
{
|
|
struct irq_domain *h;
|
|
bool ret = true;
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
list_for_each_entry(h, &irq_domain_list, link) {
|
|
if (irq_domain_is_msi(h) &&
|
|
!irq_domain_hierarchical_is_msi_remap(h)) {
|
|
ret = false;
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&irq_domain_mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_check_msi_remap);
|
|
|
|
/**
|
|
* irq_set_default_host() - Set a "default" irq domain
|
|
* @domain: default domain pointer
|
|
*
|
|
* For convenience, it's possible to set a "default" domain that will be used
|
|
* whenever NULL is passed to irq_create_mapping(). It makes life easier for
|
|
* platforms that want to manipulate a few hard coded interrupt numbers that
|
|
* aren't properly represented in the device-tree.
|
|
*/
|
|
void irq_set_default_host(struct irq_domain *domain)
|
|
{
|
|
pr_debug("Default domain set to @0x%p\n", domain);
|
|
|
|
irq_default_domain = domain;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_set_default_host);
|
|
|
|
/**
|
|
* irq_get_default_host() - Retrieve the "default" irq domain
|
|
*
|
|
* Returns: the default domain, if any.
|
|
*
|
|
* Modern code should never use this. This should only be used on
|
|
* systems that cannot implement a firmware->fwnode mapping (which
|
|
* both DT and ACPI provide).
|
|
*/
|
|
struct irq_domain *irq_get_default_host(void)
|
|
{
|
|
return irq_default_domain;
|
|
}
|
|
|
|
static void irq_domain_clear_mapping(struct irq_domain *domain,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
if (hwirq < domain->revmap_size) {
|
|
domain->linear_revmap[hwirq] = 0;
|
|
} else {
|
|
mutex_lock(&domain->revmap_tree_mutex);
|
|
radix_tree_delete(&domain->revmap_tree, hwirq);
|
|
mutex_unlock(&domain->revmap_tree_mutex);
|
|
}
|
|
}
|
|
|
|
static void irq_domain_set_mapping(struct irq_domain *domain,
|
|
irq_hw_number_t hwirq,
|
|
struct irq_data *irq_data)
|
|
{
|
|
if (hwirq < domain->revmap_size) {
|
|
domain->linear_revmap[hwirq] = irq_data->irq;
|
|
} else {
|
|
mutex_lock(&domain->revmap_tree_mutex);
|
|
radix_tree_insert(&domain->revmap_tree, hwirq, irq_data);
|
|
mutex_unlock(&domain->revmap_tree_mutex);
|
|
}
|
|
}
|
|
|
|
void irq_domain_disassociate(struct irq_domain *domain, unsigned int irq)
|
|
{
|
|
struct irq_data *irq_data = irq_get_irq_data(irq);
|
|
irq_hw_number_t hwirq;
|
|
|
|
if (WARN(!irq_data || irq_data->domain != domain,
|
|
"virq%i doesn't exist; cannot disassociate\n", irq))
|
|
return;
|
|
|
|
hwirq = irq_data->hwirq;
|
|
irq_set_status_flags(irq, IRQ_NOREQUEST);
|
|
|
|
/* remove chip and handler */
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
|
|
/* Make sure it's completed */
|
|
synchronize_irq(irq);
|
|
|
|
/* Tell the PIC about it */
|
|
if (domain->ops->unmap)
|
|
domain->ops->unmap(domain, irq);
|
|
smp_mb();
|
|
|
|
irq_data->domain = NULL;
|
|
irq_data->hwirq = 0;
|
|
domain->mapcount--;
|
|
|
|
/* Clear reverse map for this hwirq */
|
|
irq_domain_clear_mapping(domain, hwirq);
|
|
}
|
|
|
|
int irq_domain_associate(struct irq_domain *domain, unsigned int virq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct irq_data *irq_data = irq_get_irq_data(virq);
|
|
int ret;
|
|
|
|
if (WARN(hwirq >= domain->hwirq_max,
|
|
"error: hwirq 0x%x is too large for %s\n", (int)hwirq, domain->name))
|
|
return -EINVAL;
|
|
if (WARN(!irq_data, "error: virq%i is not allocated", virq))
|
|
return -EINVAL;
|
|
if (WARN(irq_data->domain, "error: virq%i is already associated", virq))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
irq_data->hwirq = hwirq;
|
|
irq_data->domain = domain;
|
|
if (domain->ops->map) {
|
|
ret = domain->ops->map(domain, virq, hwirq);
|
|
if (ret != 0) {
|
|
/*
|
|
* If map() returns -EPERM, this interrupt is protected
|
|
* by the firmware or some other service and shall not
|
|
* be mapped. Don't bother telling the user about it.
|
|
*/
|
|
if (ret != -EPERM) {
|
|
pr_info("%s didn't like hwirq-0x%lx to VIRQ%i mapping (rc=%d)\n",
|
|
domain->name, hwirq, virq, ret);
|
|
}
|
|
irq_data->domain = NULL;
|
|
irq_data->hwirq = 0;
|
|
mutex_unlock(&irq_domain_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/* If not already assigned, give the domain the chip's name */
|
|
if (!domain->name && irq_data->chip)
|
|
domain->name = irq_data->chip->name;
|
|
}
|
|
|
|
domain->mapcount++;
|
|
irq_domain_set_mapping(domain, hwirq, irq_data);
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
irq_clear_status_flags(virq, IRQ_NOREQUEST);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_associate);
|
|
|
|
void irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base,
|
|
irq_hw_number_t hwirq_base, int count)
|
|
{
|
|
struct device_node *of_node;
|
|
int i;
|
|
|
|
of_node = irq_domain_get_of_node(domain);
|
|
pr_debug("%s(%s, irqbase=%i, hwbase=%i, count=%i)\n", __func__,
|
|
of_node_full_name(of_node), irq_base, (int)hwirq_base, count);
|
|
|
|
for (i = 0; i < count; i++) {
|
|
irq_domain_associate(domain, irq_base + i, hwirq_base + i);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_associate_many);
|
|
|
|
/**
|
|
* irq_create_direct_mapping() - Allocate an irq for direct mapping
|
|
* @domain: domain to allocate the irq for or NULL for default domain
|
|
*
|
|
* This routine is used for irq controllers which can choose the hardware
|
|
* interrupt numbers they generate. In such a case it's simplest to use
|
|
* the linux irq as the hardware interrupt number. It still uses the linear
|
|
* or radix tree to store the mapping, but the irq controller can optimize
|
|
* the revmap path by using the hwirq directly.
|
|
*/
|
|
unsigned int irq_create_direct_mapping(struct irq_domain *domain)
|
|
{
|
|
struct device_node *of_node;
|
|
unsigned int virq;
|
|
|
|
if (domain == NULL)
|
|
domain = irq_default_domain;
|
|
|
|
of_node = irq_domain_get_of_node(domain);
|
|
virq = irq_alloc_desc_from(1, of_node_to_nid(of_node));
|
|
if (!virq) {
|
|
pr_debug("create_direct virq allocation failed\n");
|
|
return 0;
|
|
}
|
|
if (virq >= domain->revmap_direct_max_irq) {
|
|
pr_err("ERROR: no free irqs available below %i maximum\n",
|
|
domain->revmap_direct_max_irq);
|
|
irq_free_desc(virq);
|
|
return 0;
|
|
}
|
|
pr_debug("create_direct obtained virq %d\n", virq);
|
|
|
|
if (irq_domain_associate(domain, virq, virq)) {
|
|
irq_free_desc(virq);
|
|
return 0;
|
|
}
|
|
|
|
return virq;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_create_direct_mapping);
|
|
|
|
/**
|
|
* irq_create_mapping() - Map a hardware interrupt into linux irq space
|
|
* @domain: domain owning this hardware interrupt or NULL for default domain
|
|
* @hwirq: hardware irq number in that domain space
|
|
*
|
|
* Only one mapping per hardware interrupt is permitted. Returns a linux
|
|
* irq number.
|
|
* If the sense/trigger is to be specified, set_irq_type() should be called
|
|
* on the number returned from that call.
|
|
*/
|
|
unsigned int irq_create_mapping(struct irq_domain *domain,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct device_node *of_node;
|
|
int virq;
|
|
|
|
pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
|
|
|
|
/* Look for default domain if nececssary */
|
|
if (domain == NULL)
|
|
domain = irq_default_domain;
|
|
if (domain == NULL) {
|
|
WARN(1, "%s(, %lx) called with NULL domain\n", __func__, hwirq);
|
|
return 0;
|
|
}
|
|
pr_debug("-> using domain @%p\n", domain);
|
|
|
|
of_node = irq_domain_get_of_node(domain);
|
|
|
|
/* Check if mapping already exists */
|
|
virq = irq_find_mapping(domain, hwirq);
|
|
if (virq) {
|
|
pr_debug("-> existing mapping on virq %d\n", virq);
|
|
return virq;
|
|
}
|
|
|
|
/* Allocate a virtual interrupt number */
|
|
virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node), NULL);
|
|
if (virq <= 0) {
|
|
pr_debug("-> virq allocation failed\n");
|
|
return 0;
|
|
}
|
|
|
|
if (irq_domain_associate(domain, virq, hwirq)) {
|
|
irq_free_desc(virq);
|
|
return 0;
|
|
}
|
|
|
|
pr_debug("irq %lu on domain %s mapped to virtual irq %u\n",
|
|
hwirq, of_node_full_name(of_node), virq);
|
|
|
|
return virq;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_create_mapping);
|
|
|
|
/**
|
|
* irq_create_strict_mappings() - Map a range of hw irqs to fixed linux irqs
|
|
* @domain: domain owning the interrupt range
|
|
* @irq_base: beginning of linux IRQ range
|
|
* @hwirq_base: beginning of hardware IRQ range
|
|
* @count: Number of interrupts to map
|
|
*
|
|
* This routine is used for allocating and mapping a range of hardware
|
|
* irqs to linux irqs where the linux irq numbers are at pre-defined
|
|
* locations. For use by controllers that already have static mappings
|
|
* to insert in to the domain.
|
|
*
|
|
* Non-linear users can use irq_create_identity_mapping() for IRQ-at-a-time
|
|
* domain insertion.
|
|
*
|
|
* 0 is returned upon success, while any failure to establish a static
|
|
* mapping is treated as an error.
|
|
*/
|
|
int irq_create_strict_mappings(struct irq_domain *domain, unsigned int irq_base,
|
|
irq_hw_number_t hwirq_base, int count)
|
|
{
|
|
struct device_node *of_node;
|
|
int ret;
|
|
|
|
of_node = irq_domain_get_of_node(domain);
|
|
ret = irq_alloc_descs(irq_base, irq_base, count,
|
|
of_node_to_nid(of_node));
|
|
if (unlikely(ret < 0))
|
|
return ret;
|
|
|
|
irq_domain_associate_many(domain, irq_base, hwirq_base, count);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_create_strict_mappings);
|
|
|
|
static int irq_domain_translate(struct irq_domain *d,
|
|
struct irq_fwspec *fwspec,
|
|
irq_hw_number_t *hwirq, unsigned int *type)
|
|
{
|
|
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
|
|
if (d->ops->translate)
|
|
return d->ops->translate(d, fwspec, hwirq, type);
|
|
#endif
|
|
if (d->ops->xlate)
|
|
return d->ops->xlate(d, to_of_node(fwspec->fwnode),
|
|
fwspec->param, fwspec->param_count,
|
|
hwirq, type);
|
|
|
|
/* If domain has no translation, then we assume interrupt line */
|
|
*hwirq = fwspec->param[0];
|
|
return 0;
|
|
}
|
|
|
|
static void of_phandle_args_to_fwspec(struct device_node *np, const u32 *args,
|
|
unsigned int count,
|
|
struct irq_fwspec *fwspec)
|
|
{
|
|
int i;
|
|
|
|
fwspec->fwnode = np ? &np->fwnode : NULL;
|
|
fwspec->param_count = count;
|
|
|
|
for (i = 0; i < count; i++)
|
|
fwspec->param[i] = args[i];
|
|
}
|
|
|
|
unsigned int irq_create_fwspec_mapping(struct irq_fwspec *fwspec)
|
|
{
|
|
struct irq_domain *domain;
|
|
struct irq_data *irq_data;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type = IRQ_TYPE_NONE;
|
|
int virq;
|
|
|
|
if (fwspec->fwnode) {
|
|
domain = irq_find_matching_fwspec(fwspec, DOMAIN_BUS_WIRED);
|
|
if (!domain)
|
|
domain = irq_find_matching_fwspec(fwspec, DOMAIN_BUS_ANY);
|
|
} else {
|
|
domain = irq_default_domain;
|
|
}
|
|
|
|
if (!domain) {
|
|
pr_warn("no irq domain found for %s !\n",
|
|
of_node_full_name(to_of_node(fwspec->fwnode)));
|
|
return 0;
|
|
}
|
|
|
|
if (irq_domain_translate(domain, fwspec, &hwirq, &type))
|
|
return 0;
|
|
|
|
/*
|
|
* WARN if the irqchip returns a type with bits
|
|
* outside the sense mask set and clear these bits.
|
|
*/
|
|
if (WARN_ON(type & ~IRQ_TYPE_SENSE_MASK))
|
|
type &= IRQ_TYPE_SENSE_MASK;
|
|
|
|
/*
|
|
* If we've already configured this interrupt,
|
|
* don't do it again, or hell will break loose.
|
|
*/
|
|
virq = irq_find_mapping(domain, hwirq);
|
|
if (virq) {
|
|
/*
|
|
* If the trigger type is not specified or matches the
|
|
* current trigger type then we are done so return the
|
|
* interrupt number.
|
|
*/
|
|
if (type == IRQ_TYPE_NONE || type == irq_get_trigger_type(virq))
|
|
return virq;
|
|
|
|
/*
|
|
* If the trigger type has not been set yet, then set
|
|
* it now and return the interrupt number.
|
|
*/
|
|
if (irq_get_trigger_type(virq) == IRQ_TYPE_NONE) {
|
|
irq_data = irq_get_irq_data(virq);
|
|
if (!irq_data)
|
|
return 0;
|
|
|
|
irqd_set_trigger_type(irq_data, type);
|
|
return virq;
|
|
}
|
|
|
|
pr_warn("type mismatch, failed to map hwirq-%lu for %s!\n",
|
|
hwirq, of_node_full_name(to_of_node(fwspec->fwnode)));
|
|
return 0;
|
|
}
|
|
|
|
if (irq_domain_is_hierarchy(domain)) {
|
|
virq = irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, fwspec);
|
|
if (virq <= 0)
|
|
return 0;
|
|
} else {
|
|
/* Create mapping */
|
|
virq = irq_create_mapping(domain, hwirq);
|
|
if (!virq)
|
|
return virq;
|
|
}
|
|
|
|
irq_data = irq_get_irq_data(virq);
|
|
if (!irq_data) {
|
|
if (irq_domain_is_hierarchy(domain))
|
|
irq_domain_free_irqs(virq, 1);
|
|
else
|
|
irq_dispose_mapping(virq);
|
|
return 0;
|
|
}
|
|
|
|
/* Store trigger type */
|
|
irqd_set_trigger_type(irq_data, type);
|
|
|
|
return virq;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_create_fwspec_mapping);
|
|
|
|
unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
|
|
{
|
|
struct irq_fwspec fwspec;
|
|
|
|
of_phandle_args_to_fwspec(irq_data->np, irq_data->args,
|
|
irq_data->args_count, &fwspec);
|
|
|
|
return irq_create_fwspec_mapping(&fwspec);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
|
|
|
|
/**
|
|
* irq_dispose_mapping() - Unmap an interrupt
|
|
* @virq: linux irq number of the interrupt to unmap
|
|
*/
|
|
void irq_dispose_mapping(unsigned int virq)
|
|
{
|
|
struct irq_data *irq_data = irq_get_irq_data(virq);
|
|
struct irq_domain *domain;
|
|
|
|
if (!virq || !irq_data)
|
|
return;
|
|
|
|
domain = irq_data->domain;
|
|
if (WARN_ON(domain == NULL))
|
|
return;
|
|
|
|
if (irq_domain_is_hierarchy(domain)) {
|
|
irq_domain_free_irqs(virq, 1);
|
|
} else {
|
|
irq_domain_disassociate(domain, virq);
|
|
irq_free_desc(virq);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_dispose_mapping);
|
|
|
|
/**
|
|
* irq_find_mapping() - Find a linux irq from a hw irq number.
|
|
* @domain: domain owning this hardware interrupt
|
|
* @hwirq: hardware irq number in that domain space
|
|
*/
|
|
unsigned int irq_find_mapping(struct irq_domain *domain,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct irq_data *data;
|
|
|
|
/* Look for default domain if nececssary */
|
|
if (domain == NULL)
|
|
domain = irq_default_domain;
|
|
if (domain == NULL)
|
|
return 0;
|
|
|
|
if (hwirq < domain->revmap_direct_max_irq) {
|
|
data = irq_domain_get_irq_data(domain, hwirq);
|
|
if (data && data->hwirq == hwirq)
|
|
return hwirq;
|
|
}
|
|
|
|
/* Check if the hwirq is in the linear revmap. */
|
|
if (hwirq < domain->revmap_size)
|
|
return domain->linear_revmap[hwirq];
|
|
|
|
rcu_read_lock();
|
|
data = radix_tree_lookup(&domain->revmap_tree, hwirq);
|
|
rcu_read_unlock();
|
|
return data ? data->irq : 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_find_mapping);
|
|
|
|
/**
|
|
* irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
|
|
*
|
|
* Device Tree IRQ specifier translation function which works with one cell
|
|
* bindings where the cell value maps directly to the hwirq number.
|
|
*/
|
|
int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq, unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(intsize < 1))
|
|
return -EINVAL;
|
|
*out_hwirq = intspec[0];
|
|
*out_type = IRQ_TYPE_NONE;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
|
|
|
|
/**
|
|
* irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
|
|
*
|
|
* Device Tree IRQ specifier translation function which works with two cell
|
|
* bindings where the cell values map directly to the hwirq number
|
|
* and linux irq flags.
|
|
*/
|
|
int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
|
|
const u32 *intspec, unsigned int intsize,
|
|
irq_hw_number_t *out_hwirq, unsigned int *out_type)
|
|
{
|
|
struct irq_fwspec fwspec;
|
|
|
|
of_phandle_args_to_fwspec(ctrlr, intspec, intsize, &fwspec);
|
|
return irq_domain_translate_twocell(d, &fwspec, out_hwirq, out_type);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
|
|
|
|
/**
|
|
* irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
|
|
*
|
|
* Device Tree IRQ specifier translation function which works with either one
|
|
* or two cell bindings where the cell values map directly to the hwirq number
|
|
* and linux irq flags.
|
|
*
|
|
* Note: don't use this function unless your interrupt controller explicitly
|
|
* supports both one and two cell bindings. For the majority of controllers
|
|
* the _onecell() or _twocell() variants above should be used.
|
|
*/
|
|
int irq_domain_xlate_onetwocell(struct irq_domain *d,
|
|
struct device_node *ctrlr,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq, unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(intsize < 1))
|
|
return -EINVAL;
|
|
*out_hwirq = intspec[0];
|
|
if (intsize > 1)
|
|
*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
|
|
else
|
|
*out_type = IRQ_TYPE_NONE;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
|
|
|
|
const struct irq_domain_ops irq_domain_simple_ops = {
|
|
.xlate = irq_domain_xlate_onetwocell,
|
|
};
|
|
EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
|
|
|
|
/**
|
|
* irq_domain_translate_twocell() - Generic translate for direct two cell
|
|
* bindings
|
|
*
|
|
* Device Tree IRQ specifier translation function which works with two cell
|
|
* bindings where the cell values map directly to the hwirq number
|
|
* and linux irq flags.
|
|
*/
|
|
int irq_domain_translate_twocell(struct irq_domain *d,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *out_hwirq,
|
|
unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(fwspec->param_count < 2))
|
|
return -EINVAL;
|
|
*out_hwirq = fwspec->param[0];
|
|
*out_type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_translate_twocell);
|
|
|
|
int irq_domain_alloc_descs(int virq, unsigned int cnt, irq_hw_number_t hwirq,
|
|
int node, const struct irq_affinity_desc *affinity)
|
|
{
|
|
unsigned int hint;
|
|
|
|
if (virq >= 0) {
|
|
virq = __irq_alloc_descs(virq, virq, cnt, node, THIS_MODULE,
|
|
affinity);
|
|
} else {
|
|
hint = hwirq % nr_irqs;
|
|
if (hint == 0)
|
|
hint++;
|
|
virq = __irq_alloc_descs(-1, hint, cnt, node, THIS_MODULE,
|
|
affinity);
|
|
if (virq <= 0 && hint > 1) {
|
|
virq = __irq_alloc_descs(-1, 1, cnt, node, THIS_MODULE,
|
|
affinity);
|
|
}
|
|
}
|
|
|
|
return virq;
|
|
}
|
|
|
|
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
|
|
/**
|
|
* irq_domain_create_hierarchy - Add a irqdomain into the hierarchy
|
|
* @parent: Parent irq domain to associate with the new domain
|
|
* @flags: Irq domain flags associated to the domain
|
|
* @size: Size of the domain. See below
|
|
* @fwnode: Optional fwnode of the interrupt controller
|
|
* @ops: Pointer to the interrupt domain callbacks
|
|
* @host_data: Controller private data pointer
|
|
*
|
|
* If @size is 0 a tree domain is created, otherwise a linear domain.
|
|
*
|
|
* If successful the parent is associated to the new domain and the
|
|
* domain flags are set.
|
|
* Returns pointer to IRQ domain, or NULL on failure.
|
|
*/
|
|
struct irq_domain *irq_domain_create_hierarchy(struct irq_domain *parent,
|
|
unsigned int flags,
|
|
unsigned int size,
|
|
struct fwnode_handle *fwnode,
|
|
const struct irq_domain_ops *ops,
|
|
void *host_data)
|
|
{
|
|
struct irq_domain *domain;
|
|
|
|
if (size)
|
|
domain = irq_domain_create_linear(fwnode, size, ops, host_data);
|
|
else
|
|
domain = irq_domain_create_tree(fwnode, ops, host_data);
|
|
if (domain) {
|
|
domain->parent = parent;
|
|
domain->flags |= flags;
|
|
}
|
|
|
|
return domain;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_create_hierarchy);
|
|
|
|
static void irq_domain_insert_irq(int virq)
|
|
{
|
|
struct irq_data *data;
|
|
|
|
for (data = irq_get_irq_data(virq); data; data = data->parent_data) {
|
|
struct irq_domain *domain = data->domain;
|
|
|
|
domain->mapcount++;
|
|
irq_domain_set_mapping(domain, data->hwirq, data);
|
|
|
|
/* If not already assigned, give the domain the chip's name */
|
|
if (!domain->name && data->chip)
|
|
domain->name = data->chip->name;
|
|
}
|
|
|
|
irq_clear_status_flags(virq, IRQ_NOREQUEST);
|
|
}
|
|
|
|
static void irq_domain_remove_irq(int virq)
|
|
{
|
|
struct irq_data *data;
|
|
|
|
irq_set_status_flags(virq, IRQ_NOREQUEST);
|
|
irq_set_chip_and_handler(virq, NULL, NULL);
|
|
synchronize_irq(virq);
|
|
smp_mb();
|
|
|
|
for (data = irq_get_irq_data(virq); data; data = data->parent_data) {
|
|
struct irq_domain *domain = data->domain;
|
|
irq_hw_number_t hwirq = data->hwirq;
|
|
|
|
domain->mapcount--;
|
|
irq_domain_clear_mapping(domain, hwirq);
|
|
}
|
|
}
|
|
|
|
static struct irq_data *irq_domain_insert_irq_data(struct irq_domain *domain,
|
|
struct irq_data *child)
|
|
{
|
|
struct irq_data *irq_data;
|
|
|
|
irq_data = kzalloc_node(sizeof(*irq_data), GFP_KERNEL,
|
|
irq_data_get_node(child));
|
|
if (irq_data) {
|
|
child->parent_data = irq_data;
|
|
irq_data->irq = child->irq;
|
|
irq_data->common = child->common;
|
|
irq_data->domain = domain;
|
|
}
|
|
|
|
return irq_data;
|
|
}
|
|
|
|
static void irq_domain_free_irq_data(unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *irq_data, *tmp;
|
|
int i;
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
irq_data = irq_get_irq_data(virq + i);
|
|
tmp = irq_data->parent_data;
|
|
irq_data->parent_data = NULL;
|
|
irq_data->domain = NULL;
|
|
|
|
while (tmp) {
|
|
irq_data = tmp;
|
|
tmp = tmp->parent_data;
|
|
kfree(irq_data);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int irq_domain_alloc_irq_data(struct irq_domain *domain,
|
|
unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *irq_data;
|
|
struct irq_domain *parent;
|
|
int i;
|
|
|
|
/* The outermost irq_data is embedded in struct irq_desc */
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
irq_data = irq_get_irq_data(virq + i);
|
|
irq_data->domain = domain;
|
|
|
|
for (parent = domain->parent; parent; parent = parent->parent) {
|
|
irq_data = irq_domain_insert_irq_data(parent, irq_data);
|
|
if (!irq_data) {
|
|
irq_domain_free_irq_data(virq, i + 1);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* irq_domain_get_irq_data - Get irq_data associated with @virq and @domain
|
|
* @domain: domain to match
|
|
* @virq: IRQ number to get irq_data
|
|
*/
|
|
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
|
|
unsigned int virq)
|
|
{
|
|
struct irq_data *irq_data;
|
|
|
|
for (irq_data = irq_get_irq_data(virq); irq_data;
|
|
irq_data = irq_data->parent_data)
|
|
if (irq_data->domain == domain)
|
|
return irq_data;
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_get_irq_data);
|
|
|
|
/**
|
|
* irq_domain_set_hwirq_and_chip - Set hwirq and irqchip of @virq at @domain
|
|
* @domain: Interrupt domain to match
|
|
* @virq: IRQ number
|
|
* @hwirq: The hwirq number
|
|
* @chip: The associated interrupt chip
|
|
* @chip_data: The associated chip data
|
|
*/
|
|
int irq_domain_set_hwirq_and_chip(struct irq_domain *domain, unsigned int virq,
|
|
irq_hw_number_t hwirq, struct irq_chip *chip,
|
|
void *chip_data)
|
|
{
|
|
struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
|
|
|
|
if (!irq_data)
|
|
return -ENOENT;
|
|
|
|
irq_data->hwirq = hwirq;
|
|
irq_data->chip = chip ? chip : &no_irq_chip;
|
|
irq_data->chip_data = chip_data;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_set_hwirq_and_chip);
|
|
|
|
/**
|
|
* irq_domain_set_info - Set the complete data for a @virq in @domain
|
|
* @domain: Interrupt domain to match
|
|
* @virq: IRQ number
|
|
* @hwirq: The hardware interrupt number
|
|
* @chip: The associated interrupt chip
|
|
* @chip_data: The associated interrupt chip data
|
|
* @handler: The interrupt flow handler
|
|
* @handler_data: The interrupt flow handler data
|
|
* @handler_name: The interrupt handler name
|
|
*/
|
|
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
|
|
irq_hw_number_t hwirq, struct irq_chip *chip,
|
|
void *chip_data, irq_flow_handler_t handler,
|
|
void *handler_data, const char *handler_name)
|
|
{
|
|
irq_domain_set_hwirq_and_chip(domain, virq, hwirq, chip, chip_data);
|
|
__irq_set_handler(virq, handler, 0, handler_name);
|
|
irq_set_handler_data(virq, handler_data);
|
|
}
|
|
EXPORT_SYMBOL(irq_domain_set_info);
|
|
|
|
/**
|
|
* irq_domain_reset_irq_data - Clear hwirq, chip and chip_data in @irq_data
|
|
* @irq_data: The pointer to irq_data
|
|
*/
|
|
void irq_domain_reset_irq_data(struct irq_data *irq_data)
|
|
{
|
|
irq_data->hwirq = 0;
|
|
irq_data->chip = &no_irq_chip;
|
|
irq_data->chip_data = NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_reset_irq_data);
|
|
|
|
/**
|
|
* irq_domain_free_irqs_common - Clear irq_data and free the parent
|
|
* @domain: Interrupt domain to match
|
|
* @virq: IRQ number to start with
|
|
* @nr_irqs: The number of irqs to free
|
|
*/
|
|
void irq_domain_free_irqs_common(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *irq_data;
|
|
int i;
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
irq_data = irq_domain_get_irq_data(domain, virq + i);
|
|
if (irq_data)
|
|
irq_domain_reset_irq_data(irq_data);
|
|
}
|
|
irq_domain_free_irqs_parent(domain, virq, nr_irqs);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_free_irqs_common);
|
|
|
|
/**
|
|
* irq_domain_free_irqs_top - Clear handler and handler data, clear irqdata and free parent
|
|
* @domain: Interrupt domain to match
|
|
* @virq: IRQ number to start with
|
|
* @nr_irqs: The number of irqs to free
|
|
*/
|
|
void irq_domain_free_irqs_top(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
irq_set_handler_data(virq + i, NULL);
|
|
irq_set_handler(virq + i, NULL);
|
|
}
|
|
irq_domain_free_irqs_common(domain, virq, nr_irqs);
|
|
}
|
|
|
|
static void irq_domain_free_irqs_hierarchy(struct irq_domain *domain,
|
|
unsigned int irq_base,
|
|
unsigned int nr_irqs)
|
|
{
|
|
if (domain->ops->free)
|
|
domain->ops->free(domain, irq_base, nr_irqs);
|
|
}
|
|
|
|
int irq_domain_alloc_irqs_hierarchy(struct irq_domain *domain,
|
|
unsigned int irq_base,
|
|
unsigned int nr_irqs, void *arg)
|
|
{
|
|
return domain->ops->alloc(domain, irq_base, nr_irqs, arg);
|
|
}
|
|
|
|
/**
|
|
* __irq_domain_alloc_irqs - Allocate IRQs from domain
|
|
* @domain: domain to allocate from
|
|
* @irq_base: allocate specified IRQ nubmer if irq_base >= 0
|
|
* @nr_irqs: number of IRQs to allocate
|
|
* @node: NUMA node id for memory allocation
|
|
* @arg: domain specific argument
|
|
* @realloc: IRQ descriptors have already been allocated if true
|
|
* @affinity: Optional irq affinity mask for multiqueue devices
|
|
*
|
|
* Allocate IRQ numbers and initialized all data structures to support
|
|
* hierarchy IRQ domains.
|
|
* Parameter @realloc is mainly to support legacy IRQs.
|
|
* Returns error code or allocated IRQ number
|
|
*
|
|
* The whole process to setup an IRQ has been split into two steps.
|
|
* The first step, __irq_domain_alloc_irqs(), is to allocate IRQ
|
|
* descriptor and required hardware resources. The second step,
|
|
* irq_domain_activate_irq(), is to program hardwares with preallocated
|
|
* resources. In this way, it's easier to rollback when failing to
|
|
* allocate resources.
|
|
*/
|
|
int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
|
|
unsigned int nr_irqs, int node, void *arg,
|
|
bool realloc, const struct irq_affinity_desc *affinity)
|
|
{
|
|
int i, ret, virq;
|
|
|
|
if (domain == NULL) {
|
|
domain = irq_default_domain;
|
|
if (WARN(!domain, "domain is NULL; cannot allocate IRQ\n"))
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!domain->ops->alloc) {
|
|
pr_debug("domain->ops->alloc() is NULL\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
if (realloc && irq_base >= 0) {
|
|
virq = irq_base;
|
|
} else {
|
|
virq = irq_domain_alloc_descs(irq_base, nr_irqs, 0, node,
|
|
affinity);
|
|
if (virq < 0) {
|
|
pr_debug("cannot allocate IRQ(base %d, count %d)\n",
|
|
irq_base, nr_irqs);
|
|
return virq;
|
|
}
|
|
}
|
|
|
|
if (irq_domain_alloc_irq_data(domain, virq, nr_irqs)) {
|
|
pr_debug("cannot allocate memory for IRQ%d\n", virq);
|
|
ret = -ENOMEM;
|
|
goto out_free_desc;
|
|
}
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
ret = irq_domain_alloc_irqs_hierarchy(domain, virq, nr_irqs, arg);
|
|
if (ret < 0) {
|
|
mutex_unlock(&irq_domain_mutex);
|
|
goto out_free_irq_data;
|
|
}
|
|
for (i = 0; i < nr_irqs; i++)
|
|
irq_domain_insert_irq(virq + i);
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
return virq;
|
|
|
|
out_free_irq_data:
|
|
irq_domain_free_irq_data(virq, nr_irqs);
|
|
out_free_desc:
|
|
irq_free_descs(virq, nr_irqs);
|
|
return ret;
|
|
}
|
|
|
|
/* The irq_data was moved, fix the revmap to refer to the new location */
|
|
static void irq_domain_fix_revmap(struct irq_data *d)
|
|
{
|
|
void __rcu **slot;
|
|
|
|
if (d->hwirq < d->domain->revmap_size)
|
|
return; /* Not using radix tree. */
|
|
|
|
/* Fix up the revmap. */
|
|
mutex_lock(&d->domain->revmap_tree_mutex);
|
|
slot = radix_tree_lookup_slot(&d->domain->revmap_tree, d->hwirq);
|
|
if (slot)
|
|
radix_tree_replace_slot(&d->domain->revmap_tree, slot, d);
|
|
mutex_unlock(&d->domain->revmap_tree_mutex);
|
|
}
|
|
|
|
/**
|
|
* irq_domain_push_irq() - Push a domain in to the top of a hierarchy.
|
|
* @domain: Domain to push.
|
|
* @virq: Irq to push the domain in to.
|
|
* @arg: Passed to the irq_domain_ops alloc() function.
|
|
*
|
|
* For an already existing irqdomain hierarchy, as might be obtained
|
|
* via a call to pci_enable_msix(), add an additional domain to the
|
|
* head of the processing chain. Must be called before request_irq()
|
|
* has been called.
|
|
*/
|
|
int irq_domain_push_irq(struct irq_domain *domain, int virq, void *arg)
|
|
{
|
|
struct irq_data *child_irq_data;
|
|
struct irq_data *root_irq_data = irq_get_irq_data(virq);
|
|
struct irq_desc *desc;
|
|
int rv = 0;
|
|
|
|
/*
|
|
* Check that no action has been set, which indicates the virq
|
|
* is in a state where this function doesn't have to deal with
|
|
* races between interrupt handling and maintaining the
|
|
* hierarchy. This will catch gross misuse. Attempting to
|
|
* make the check race free would require holding locks across
|
|
* calls to struct irq_domain_ops->alloc(), which could lead
|
|
* to deadlock, so we just do a simple check before starting.
|
|
*/
|
|
desc = irq_to_desc(virq);
|
|
if (!desc)
|
|
return -EINVAL;
|
|
if (WARN_ON(desc->action))
|
|
return -EBUSY;
|
|
|
|
if (domain == NULL)
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(!irq_domain_is_hierarchy(domain)))
|
|
return -EINVAL;
|
|
|
|
if (!root_irq_data)
|
|
return -EINVAL;
|
|
|
|
if (domain->parent != root_irq_data->domain)
|
|
return -EINVAL;
|
|
|
|
child_irq_data = kzalloc_node(sizeof(*child_irq_data), GFP_KERNEL,
|
|
irq_data_get_node(root_irq_data));
|
|
if (!child_irq_data)
|
|
return -ENOMEM;
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
|
|
/* Copy the original irq_data. */
|
|
*child_irq_data = *root_irq_data;
|
|
|
|
/*
|
|
* Overwrite the root_irq_data, which is embedded in struct
|
|
* irq_desc, with values for this domain.
|
|
*/
|
|
root_irq_data->parent_data = child_irq_data;
|
|
root_irq_data->domain = domain;
|
|
root_irq_data->mask = 0;
|
|
root_irq_data->hwirq = 0;
|
|
root_irq_data->chip = NULL;
|
|
root_irq_data->chip_data = NULL;
|
|
|
|
/* May (probably does) set hwirq, chip, etc. */
|
|
rv = irq_domain_alloc_irqs_hierarchy(domain, virq, 1, arg);
|
|
if (rv) {
|
|
/* Restore the original irq_data. */
|
|
*root_irq_data = *child_irq_data;
|
|
goto error;
|
|
}
|
|
|
|
irq_domain_fix_revmap(child_irq_data);
|
|
irq_domain_set_mapping(domain, root_irq_data->hwirq, root_irq_data);
|
|
|
|
error:
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
return rv;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_push_irq);
|
|
|
|
/**
|
|
* irq_domain_pop_irq() - Remove a domain from the top of a hierarchy.
|
|
* @domain: Domain to remove.
|
|
* @virq: Irq to remove the domain from.
|
|
*
|
|
* Undo the effects of a call to irq_domain_push_irq(). Must be
|
|
* called either before request_irq() or after free_irq().
|
|
*/
|
|
int irq_domain_pop_irq(struct irq_domain *domain, int virq)
|
|
{
|
|
struct irq_data *root_irq_data = irq_get_irq_data(virq);
|
|
struct irq_data *child_irq_data;
|
|
struct irq_data *tmp_irq_data;
|
|
struct irq_desc *desc;
|
|
|
|
/*
|
|
* Check that no action is set, which indicates the virq is in
|
|
* a state where this function doesn't have to deal with races
|
|
* between interrupt handling and maintaining the hierarchy.
|
|
* This will catch gross misuse. Attempting to make the check
|
|
* race free would require holding locks across calls to
|
|
* struct irq_domain_ops->free(), which could lead to
|
|
* deadlock, so we just do a simple check before starting.
|
|
*/
|
|
desc = irq_to_desc(virq);
|
|
if (!desc)
|
|
return -EINVAL;
|
|
if (WARN_ON(desc->action))
|
|
return -EBUSY;
|
|
|
|
if (domain == NULL)
|
|
return -EINVAL;
|
|
|
|
if (!root_irq_data)
|
|
return -EINVAL;
|
|
|
|
tmp_irq_data = irq_domain_get_irq_data(domain, virq);
|
|
|
|
/* We can only "pop" if this domain is at the top of the list */
|
|
if (WARN_ON(root_irq_data != tmp_irq_data))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(root_irq_data->domain != domain))
|
|
return -EINVAL;
|
|
|
|
child_irq_data = root_irq_data->parent_data;
|
|
if (WARN_ON(!child_irq_data))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
|
|
root_irq_data->parent_data = NULL;
|
|
|
|
irq_domain_clear_mapping(domain, root_irq_data->hwirq);
|
|
irq_domain_free_irqs_hierarchy(domain, virq, 1);
|
|
|
|
/* Restore the original irq_data. */
|
|
*root_irq_data = *child_irq_data;
|
|
|
|
irq_domain_fix_revmap(root_irq_data);
|
|
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
kfree(child_irq_data);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_pop_irq);
|
|
|
|
/**
|
|
* irq_domain_free_irqs - Free IRQ number and associated data structures
|
|
* @virq: base IRQ number
|
|
* @nr_irqs: number of IRQs to free
|
|
*/
|
|
void irq_domain_free_irqs(unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *data = irq_get_irq_data(virq);
|
|
int i;
|
|
|
|
if (WARN(!data || !data->domain || !data->domain->ops->free,
|
|
"NULL pointer, cannot free irq\n"))
|
|
return;
|
|
|
|
mutex_lock(&irq_domain_mutex);
|
|
for (i = 0; i < nr_irqs; i++)
|
|
irq_domain_remove_irq(virq + i);
|
|
irq_domain_free_irqs_hierarchy(data->domain, virq, nr_irqs);
|
|
mutex_unlock(&irq_domain_mutex);
|
|
|
|
irq_domain_free_irq_data(virq, nr_irqs);
|
|
irq_free_descs(virq, nr_irqs);
|
|
}
|
|
|
|
/**
|
|
* irq_domain_alloc_irqs_parent - Allocate interrupts from parent domain
|
|
* @irq_base: Base IRQ number
|
|
* @nr_irqs: Number of IRQs to allocate
|
|
* @arg: Allocation data (arch/domain specific)
|
|
*
|
|
* Check whether the domain has been setup recursive. If not allocate
|
|
* through the parent domain.
|
|
*/
|
|
int irq_domain_alloc_irqs_parent(struct irq_domain *domain,
|
|
unsigned int irq_base, unsigned int nr_irqs,
|
|
void *arg)
|
|
{
|
|
if (!domain->parent)
|
|
return -ENOSYS;
|
|
|
|
return irq_domain_alloc_irqs_hierarchy(domain->parent, irq_base,
|
|
nr_irqs, arg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_alloc_irqs_parent);
|
|
|
|
/**
|
|
* irq_domain_free_irqs_parent - Free interrupts from parent domain
|
|
* @irq_base: Base IRQ number
|
|
* @nr_irqs: Number of IRQs to free
|
|
*
|
|
* Check whether the domain has been setup recursive. If not free
|
|
* through the parent domain.
|
|
*/
|
|
void irq_domain_free_irqs_parent(struct irq_domain *domain,
|
|
unsigned int irq_base, unsigned int nr_irqs)
|
|
{
|
|
if (!domain->parent)
|
|
return;
|
|
|
|
irq_domain_free_irqs_hierarchy(domain->parent, irq_base, nr_irqs);
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_free_irqs_parent);
|
|
|
|
static void __irq_domain_deactivate_irq(struct irq_data *irq_data)
|
|
{
|
|
if (irq_data && irq_data->domain) {
|
|
struct irq_domain *domain = irq_data->domain;
|
|
|
|
if (domain->ops->deactivate)
|
|
domain->ops->deactivate(domain, irq_data);
|
|
if (irq_data->parent_data)
|
|
__irq_domain_deactivate_irq(irq_data->parent_data);
|
|
}
|
|
}
|
|
|
|
static int __irq_domain_activate_irq(struct irq_data *irqd, bool reserve)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (irqd && irqd->domain) {
|
|
struct irq_domain *domain = irqd->domain;
|
|
|
|
if (irqd->parent_data)
|
|
ret = __irq_domain_activate_irq(irqd->parent_data,
|
|
reserve);
|
|
if (!ret && domain->ops->activate) {
|
|
ret = domain->ops->activate(domain, irqd, reserve);
|
|
/* Rollback in case of error */
|
|
if (ret && irqd->parent_data)
|
|
__irq_domain_deactivate_irq(irqd->parent_data);
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* irq_domain_activate_irq - Call domain_ops->activate recursively to activate
|
|
* interrupt
|
|
* @irq_data: Outermost irq_data associated with interrupt
|
|
* @reserve: If set only reserve an interrupt vector instead of assigning one
|
|
*
|
|
* This is the second step to call domain_ops->activate to program interrupt
|
|
* controllers, so the interrupt could actually get delivered.
|
|
*/
|
|
int irq_domain_activate_irq(struct irq_data *irq_data, bool reserve)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!irqd_is_activated(irq_data))
|
|
ret = __irq_domain_activate_irq(irq_data, reserve);
|
|
if (!ret)
|
|
irqd_set_activated(irq_data);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* irq_domain_deactivate_irq - Call domain_ops->deactivate recursively to
|
|
* deactivate interrupt
|
|
* @irq_data: outermost irq_data associated with interrupt
|
|
*
|
|
* It calls domain_ops->deactivate to program interrupt controllers to disable
|
|
* interrupt delivery.
|
|
*/
|
|
void irq_domain_deactivate_irq(struct irq_data *irq_data)
|
|
{
|
|
if (irqd_is_activated(irq_data)) {
|
|
__irq_domain_deactivate_irq(irq_data);
|
|
irqd_clr_activated(irq_data);
|
|
}
|
|
}
|
|
|
|
static void irq_domain_check_hierarchy(struct irq_domain *domain)
|
|
{
|
|
/* Hierarchy irq_domains must implement callback alloc() */
|
|
if (domain->ops->alloc)
|
|
domain->flags |= IRQ_DOMAIN_FLAG_HIERARCHY;
|
|
}
|
|
|
|
/**
|
|
* irq_domain_hierarchical_is_msi_remap - Check if the domain or any
|
|
* parent has MSI remapping support
|
|
* @domain: domain pointer
|
|
*/
|
|
bool irq_domain_hierarchical_is_msi_remap(struct irq_domain *domain)
|
|
{
|
|
for (; domain; domain = domain->parent) {
|
|
if (irq_domain_is_msi_remap(domain))
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
#else /* CONFIG_IRQ_DOMAIN_HIERARCHY */
|
|
/**
|
|
* irq_domain_get_irq_data - Get irq_data associated with @virq and @domain
|
|
* @domain: domain to match
|
|
* @virq: IRQ number to get irq_data
|
|
*/
|
|
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
|
|
unsigned int virq)
|
|
{
|
|
struct irq_data *irq_data = irq_get_irq_data(virq);
|
|
|
|
return (irq_data && irq_data->domain == domain) ? irq_data : NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(irq_domain_get_irq_data);
|
|
|
|
/**
|
|
* irq_domain_set_info - Set the complete data for a @virq in @domain
|
|
* @domain: Interrupt domain to match
|
|
* @virq: IRQ number
|
|
* @hwirq: The hardware interrupt number
|
|
* @chip: The associated interrupt chip
|
|
* @chip_data: The associated interrupt chip data
|
|
* @handler: The interrupt flow handler
|
|
* @handler_data: The interrupt flow handler data
|
|
* @handler_name: The interrupt handler name
|
|
*/
|
|
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
|
|
irq_hw_number_t hwirq, struct irq_chip *chip,
|
|
void *chip_data, irq_flow_handler_t handler,
|
|
void *handler_data, const char *handler_name)
|
|
{
|
|
irq_set_chip_and_handler_name(virq, chip, handler, handler_name);
|
|
irq_set_chip_data(virq, chip_data);
|
|
irq_set_handler_data(virq, handler_data);
|
|
}
|
|
|
|
static void irq_domain_check_hierarchy(struct irq_domain *domain)
|
|
{
|
|
}
|
|
#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
|
|
|
|
#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
|
|
static struct dentry *domain_dir;
|
|
|
|
static void
|
|
irq_domain_debug_show_one(struct seq_file *m, struct irq_domain *d, int ind)
|
|
{
|
|
seq_printf(m, "%*sname: %s\n", ind, "", d->name);
|
|
seq_printf(m, "%*ssize: %u\n", ind + 1, "",
|
|
d->revmap_size + d->revmap_direct_max_irq);
|
|
seq_printf(m, "%*smapped: %u\n", ind + 1, "", d->mapcount);
|
|
seq_printf(m, "%*sflags: 0x%08x\n", ind +1 , "", d->flags);
|
|
if (d->ops && d->ops->debug_show)
|
|
d->ops->debug_show(m, d, NULL, ind + 1);
|
|
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
|
|
if (!d->parent)
|
|
return;
|
|
seq_printf(m, "%*sparent: %s\n", ind + 1, "", d->parent->name);
|
|
irq_domain_debug_show_one(m, d->parent, ind + 4);
|
|
#endif
|
|
}
|
|
|
|
static int irq_domain_debug_show(struct seq_file *m, void *p)
|
|
{
|
|
struct irq_domain *d = m->private;
|
|
|
|
/* Default domain? Might be NULL */
|
|
if (!d) {
|
|
if (!irq_default_domain)
|
|
return 0;
|
|
d = irq_default_domain;
|
|
}
|
|
irq_domain_debug_show_one(m, d, 0);
|
|
return 0;
|
|
}
|
|
DEFINE_SHOW_ATTRIBUTE(irq_domain_debug);
|
|
|
|
static void debugfs_add_domain_dir(struct irq_domain *d)
|
|
{
|
|
if (!d->name || !domain_dir || d->debugfs_file)
|
|
return;
|
|
d->debugfs_file = debugfs_create_file(d->name, 0444, domain_dir, d,
|
|
&irq_domain_debug_fops);
|
|
}
|
|
|
|
static void debugfs_remove_domain_dir(struct irq_domain *d)
|
|
{
|
|
debugfs_remove(d->debugfs_file);
|
|
d->debugfs_file = NULL;
|
|
}
|
|
|
|
void __init irq_domain_debugfs_init(struct dentry *root)
|
|
{
|
|
struct irq_domain *d;
|
|
|
|
domain_dir = debugfs_create_dir("domains", root);
|
|
|
|
debugfs_create_file("default", 0444, domain_dir, NULL,
|
|
&irq_domain_debug_fops);
|
|
mutex_lock(&irq_domain_mutex);
|
|
list_for_each_entry(d, &irq_domain_list, link)
|
|
debugfs_add_domain_dir(d);
|
|
mutex_unlock(&irq_domain_mutex);
|
|
}
|
|
#endif
|