AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
0a85b964e1
kernel_optimize_test/include/linux/if.h
Jay Vosburgh f5b2b966f0 [PATCH] bonding: Validate probe replies in ARP monitor 
Add logic to check ARP request / reply packets used for ARP
monitor link integrity checking.

	The current method simply examines the slave device to see if it
has sent and received traffic; this can be fooled by extraneous traffic.
For example, if multiple hosts running bonding are behind a common
switch, the probe traffic from the multiple instances of bonding will
update the tx/rx times on each other's slave devices.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25 20:08:09 -04:00

348 lines
11 KiB
C
Raw Blame History

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the INET interface module.
*
* Version: @(#)if.h 1.0.2 04/18/93
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
* Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_IF_H
#define _LINUX_IF_H
#include <linux/types.h> /* for "__kernel_caddr_t" et al */
#include <linux/socket.h> /* for "struct sockaddr" et al */
#include <linux/compiler.h> /* for "__user" et al */
#define IFNAMSIZ 16
#include <linux/hdlc/ioctl.h>
/* Standard interface flags (netdevice->flags). */
#define IFF_UP 0x1 /* interface is up */
#define IFF_BROADCAST 0x2 /* broadcast address valid */
#define IFF_DEBUG 0x4 /* turn on debugging */
#define IFF_LOOPBACK 0x8 /* is a loopback net */
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
#define IFF_NOARP 0x80 /* no ARP protocol */
#define IFF_PROMISC 0x100 /* receive all packets */
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
#define IFF_MASTER 0x400 /* master of a load balancer */
#define IFF_SLAVE 0x800 /* slave of a load balancer */
#define IFF_MULTICAST 0x1000 /* Supports multicast */
#define IFF_PORTSEL 0x2000 /* can set media type */
#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
#define IFF_DORMANT 0x20000 /* driver signals dormant */
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
/* Private (from user) interface flags (netdevice->priv_flags). */
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
#define IFF_BONDING 0x20 /* bonding master or slave */
#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
/* For definitions see hdlc.h */
#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
/* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
#define IF_PROTO_PPP 0x2001 /* PPP protocol */
#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
#define IF_PROTO_X25 0x2006 /* X.25 */
#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW 0x200C /* RAW Socket */
/* RFC 2863 operational status */
enum {
IF_OPER_UNKNOWN,
IF_OPER_NOTPRESENT,
IF_OPER_DOWN,
IF_OPER_LOWERLAYERDOWN,
IF_OPER_TESTING,
IF_OPER_DORMANT,
IF_OPER_UP,
};
/* link modes */
enum {
IF_LINK_MODE_DEFAULT,
IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
};
/*
* Device mapping structure. I'd just gone off and designed a
* beautiful scheme using only loadable modules with arguments
* for driver options and along come the PCMCIA people 8)
*
* Ah well. The get() side of this is good for WDSETUP, and it'll
* be handy for debugging things. The set side is fine for now and
* being very small might be worth keeping for clean configuration.
*/
struct ifmap
{
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
/* 3 bytes spare */
};
struct if_settings
{
unsigned int type; /* Type of physical device or protocol */
unsigned int size; /* Size of the data allocated by the caller */
union {
/* {atm/eth/dsl}_settings anyone ? */
raw_hdlc_proto __user *raw_hdlc;
cisco_proto __user *cisco;
fr_proto __user *fr;
fr_proto_pvc __user *fr_pvc;
fr_proto_pvc_info __user *fr_pvc_info;
/* interface settings */
sync_serial_settings __user *sync;
te1_settings __user *te1;
} ifs_ifsu;
};
/*
* Interface request structure used for socket
* ioctl's. All interface ioctl's must have parameter
* definitions which begin with ifr_name. The
* remainder may be interface specific.
*/
struct ifreq
{
#define IFHWADDRLEN 6
union
{
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
} ifr_ifrn;
union {
struct sockaddr ifru_addr;
struct sockaddr ifru_dstaddr;
struct sockaddr ifru_broadaddr;
struct sockaddr ifru_netmask;
struct sockaddr ifru_hwaddr;
short ifru_flags;
int ifru_ivalue;
int ifru_mtu;
struct ifmap ifru_map;
char ifru_slave[IFNAMSIZ]; /* Just fits the size */
char ifru_newname[IFNAMSIZ];
void __user * ifru_data;
struct if_settings ifru_settings;
} ifr_ifru;
};
#define ifr_name ifr_ifrn.ifrn_name /* interface name */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
#define ifr_addr ifr_ifru.ifru_addr /* address */
#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
#define ifr_flags ifr_ifru.ifru_flags /* flags */
#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
#define ifr_map ifr_ifru.ifru_map /* device map */
#define ifr_slave ifr_ifru.ifru_slave /* slave device */
#define ifr_data ifr_ifru.ifru_data /* for use by interface */
#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
#define ifr_newname ifr_ifru.ifru_newname /* New name */
#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
/*
* Structure used in SIOCGIFCONF request.
* Used to retrieve interface configuration
* for machine (useful for programs which
* must know all networks accessible).
*/
struct ifconf
{
int ifc_len; /* size of buffer */
union
{
char __user *ifcu_buf;
struct ifreq __user *ifcu_req;
} ifc_ifcu;
};
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
/* The struct should be in sync with struct net_device_stats */
struct rtnl_link_stats
{
__u32 rx_packets; /* total packets received */
__u32 tx_packets; /* total packets transmitted */
__u32 rx_bytes; /* total bytes received */
__u32 tx_bytes; /* total bytes transmitted */
__u32 rx_errors; /* bad packets received */
__u32 tx_errors; /* packet transmit problems */
__u32 rx_dropped; /* no space in linux buffers */
__u32 tx_dropped; /* no space available in linux */
__u32 multicast; /* multicast packets received */
__u32 collisions;
/* detailed rx_errors: */
__u32 rx_length_errors;
__u32 rx_over_errors; /* receiver ring buff overflow */
__u32 rx_crc_errors; /* recved pkt with crc error */
__u32 rx_frame_errors; /* recv'd frame alignment error */
__u32 rx_fifo_errors; /* recv'r fifo overrun */
__u32 rx_missed_errors; /* receiver missed packet */
/* detailed tx_errors */
__u32 tx_aborted_errors;
__u32 tx_carrier_errors;
__u32 tx_fifo_errors;
__u32 tx_heartbeat_errors;
__u32 tx_window_errors;
/* for cslip etc */
__u32 rx_compressed;
__u32 tx_compressed;
};
/* The struct should be in sync with struct ifmap */
struct rtnl_link_ifmap
{
__u64 mem_start;
__u64 mem_end;
__u64 base_addr;
__u16 irq;
__u8 dma;
__u8 port;
};
enum
{
IFLA_UNSPEC,
IFLA_ADDRESS,
IFLA_BROADCAST,
IFLA_IFNAME,
IFLA_MTU,
IFLA_LINK,
IFLA_QDISC,
IFLA_STATS,
IFLA_COST,
#define IFLA_COST IFLA_COST
IFLA_PRIORITY,
#define IFLA_PRIORITY IFLA_PRIORITY
IFLA_MASTER,
#define IFLA_MASTER IFLA_MASTER
IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
#define IFLA_WIRELESS IFLA_WIRELESS
IFLA_PROTINFO, /* Protocol specific information for a link */
#define IFLA_PROTINFO IFLA_PROTINFO
IFLA_TXQLEN,
#define IFLA_TXQLEN IFLA_TXQLEN
IFLA_MAP,
#define IFLA_MAP IFLA_MAP
IFLA_WEIGHT,
#define IFLA_WEIGHT IFLA_WEIGHT
IFLA_OPERSTATE,
IFLA_LINKMODE,
__IFLA_MAX
};
#define IFLA_MAX (__IFLA_MAX - 1)
/* ifi_flags.
IFF_* flags.
The only change is:
IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
more not changeable by user. They describe link media
characteristics and set by device driver.
Comments:
- Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
- If neither of these three flags are set;
the interface is NBMA.
- IFF_MULTICAST does not mean anything special:
multicasts can be used on all not-NBMA links.
IFF_MULTICAST means that this media uses special encapsulation
for multicast frames. Apparently, all IFF_POINTOPOINT and
IFF_BROADCAST devices are able to use multicasts too.
*/
/* IFLA_LINK.
For usual devices it is equal ifi_index.
If it is a "virtual interface" (f.e. tunnel), ifi_link
can point to real physical interface (f.e. for bandwidth calculations),
or maybe 0, what means, that real media is unknown (usual
for IPIP tunnels, when route to endpoint is allowed to change)
*/
/* Subtype attributes for IFLA_PROTINFO */
enum
{
IFLA_INET6_UNSPEC,
IFLA_INET6_FLAGS, /* link flags */
IFLA_INET6_CONF, /* sysctl parameters */
IFLA_INET6_STATS, /* statistics */
IFLA_INET6_MCAST, /* MC things. What of them? */
IFLA_INET6_CACHEINFO, /* time values and max reasm size */
__IFLA_INET6_MAX
};
#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
struct ifla_cacheinfo
{
__u32 max_reasm_len;
__u32 tstamp; /* ipv6InterfaceTable updated timestamp */
__u32 reachable_time;
__u32 retrans_time;
};
#endif /* _LINUX_IF_H */
View Git Blame Copy Permalink