kernel_optimize_test/arch/powerpc/sysdev
Anton Vorontsov 0b51b02edf [POWERPC] QE: implement qe_muram_offset
qe_muram_offset is the reverse of the qe_muram_addr, will be
used for the Freescale QE USB Host Controller driver.

This patch also moves qe_muram_addr into the qe.h header, plus
adds __iomem hints to use with sparse.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:39 -05:00
..
bestcomm [POWERPC] Fix Oops with TQM5200 on TQM5200 2008-03-24 17:55:51 +11:00
qe_lib [POWERPC] QE: implement qe_muram_offset 2008-04-17 01:01:39 -05:00
axonram.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
cpm1.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
cpm2_pic.c [POWERPC] cpm2: Infrastructure code cleanup. 2007-10-04 11:02:04 -05:00
cpm2_pic.h [POWERPC] cpm2: CPM2 interrupt controller fix 2007-02-07 14:03:20 +11:00
cpm2.c [POWERPC] CPM2: Reset the CPM when early debugging is not enabled. 2008-04-17 01:01:37 -05:00
cpm_common.c [POWERPC] cpm: Fix a couple minor issues in cpm_common.c. 2007-11-09 03:47:44 -06:00
dart_iommu.c [LIB]: Make PowerPC LMB code generic so sparc64 can use it too. 2008-02-13 16:56:49 -08:00
dart.h [POWERPC] Use 4kB iommu pages even on 64kB-page systems 2006-11-01 14:52:48 +11:00
dcr-low.S [POWERPC] Generic DCR infrastructure 2006-12-04 16:08:25 +11:00
dcr.c [POWERPC] Add missing native dcr dcr_ind_lock spinlock 2008-02-06 21:02:56 -06:00
fsl_lbc.c [POWERPC] fsl_lbc: implement few UPM routines 2008-04-17 01:01:38 -05:00
fsl_pci.c [POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx 2008-01-23 19:31:16 -06:00
fsl_pci.h [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected 2007-07-23 10:27:08 -05:00
fsl_rio.c [POWERPC] Move RapidIO support code from arch/ppc 2008-01-23 19:35:15 -06:00
fsl_rio.h [POWERPC] Move RapidIO support code from arch/ppc 2008-01-23 19:35:15 -06:00
fsl_soc.c [POWERPC] FSL: fix mpc83xx_spi device registration 2008-02-05 23:38:27 -06:00
fsl_soc.h [POWERPC] 85xx/86xx: refactor RSTCR reset code 2007-10-08 08:38:47 -05:00
grackle.c [POWERPC] pci32: Add flags modifying the PCI code behaviour 2007-12-20 16:18:07 +11:00
i8259.c [POWERPC] i8259: Add disable method 2007-11-08 14:15:29 +11:00
indirect_pci.c [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci 2007-10-12 14:05:17 +10:00
ipic.c [POWERPC] Fix crash in init_ipic_sysfs on efika 2008-03-24 17:55:00 +11:00
ipic.h [POWERPC] ipic: ack only for edge interrupts 2007-12-12 01:53:07 -06:00
Kconfig [POWERPC] 4xx: PLB to PCI Express support 2007-12-23 13:12:34 -06:00
Makefile [POWERPC] fsl_lbc: implement few UPM routines 2008-04-17 01:01:38 -05:00
micropatch.c [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c 2008-01-28 08:31:05 -06:00
mmio_nvram.c [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
mpc8xx_pic.c [POWERPC] arch/powerpc/sysdev: Add missing of_node_put 2008-02-06 22:06:59 +11:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpic_msi.c [POWERPC] Fix section mismatch in PCI code 2007-09-19 15:25:34 +10:00
mpic_pasemi_msi.c [POWERPC] pasemi: Remove warning in mpic_pasemi_msi.c 2008-02-21 21:08:35 +11:00
mpic_u3msi.c [POWERPC] Inline u3msi_compose_msi_msg() 2007-10-03 09:11:42 +10:00
mpic.c [POWERPC] kexec: MPIC ack interrupts at mpic_teardown_this_cpu() 2008-04-07 09:16:29 -05:00
mpic.h [POWERPC] pasemi: Implement NMI support 2007-12-28 09:22:24 -06:00
mv64x60_dev.c [POWERPC] mv643xx_eth: Prepare to support multiple silicon blocks 2008-04-15 21:21:24 +10:00
mv64x60_pci.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60_pic.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60_udbg.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
of_rtc.c [POWERPC] Enable RTC for Ebony and Walnut (v2) 2008-01-25 07:07:26 -06:00
pmi.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
ppc4xx_pci.c [POWERPC] 4xx: Fix PESDRn_UTLSET1 register setup on 460EX/GT 2008-04-02 20:29:30 -05:00
ppc4xx_pci.h [POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driver 2008-03-26 07:19:16 -05:00
ppc4xx_soc.c [POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c 2008-04-02 20:44:56 -05:00
rtc_cmos_setup.c [POWERPC] Add MODULE_LICENSE to powerpc/sysdev/rtc_cmos_setup.c 2008-04-17 07:46:12 +10:00
tsi108_dev.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
tsi108_pci.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
uic.c [POWERPC] Use for_each macros in arch/powerpc/sysdev 2008-01-17 14:56:54 +11:00
xilinx_intc.c [POWERPC] Xilinx: update compatible list for interrupt controller 2008-01-09 07:48:31 -07:00