AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
0befd061af
kernel_optimize_test/include/net/ax25.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

469 lines
15 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Declarations of AX.25 type objects.
*
* Alan Cox (GW4PTS) 10/11/93
*/
#ifndef _AX25_H
#define _AX25_H
#include <linux/ax25.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/refcount.h>
#include <net/neighbour.h>
#include <net/sock.h>
#define AX25_T1CLAMPLO 1
#define AX25_T1CLAMPHI (30 * HZ)
#define AX25_BPQ_HEADER_LEN 16
#define AX25_KISS_HEADER_LEN 1
#define AX25_HEADER_LEN 17
#define AX25_ADDR_LEN 7
#define AX25_DIGI_HEADER_LEN (AX25_MAX_DIGIS * AX25_ADDR_LEN)
#define AX25_MAX_HEADER_LEN (AX25_HEADER_LEN + AX25_DIGI_HEADER_LEN)
/* AX.25 Protocol IDs */
#define AX25_P_ROSE 0x01
#define AX25_P_VJCOMP 0x06 /* Compressed TCP/IP packet */
/* Van Jacobsen (RFC 1144) */
#define AX25_P_VJUNCOMP 0x07 /* Uncompressed TCP/IP packet */
/* Van Jacobsen (RFC 1144) */
#define AX25_P_SEGMENT 0x08 /* Segmentation fragment */
#define AX25_P_TEXNET 0xc3 /* TEXTNET datagram protocol */
#define AX25_P_LQ 0xc4 /* Link Quality Protocol */
#define AX25_P_ATALK 0xca /* Appletalk */
#define AX25_P_ATALK_ARP 0xcb /* Appletalk ARP */
#define AX25_P_IP 0xcc /* ARPA Internet Protocol */
#define AX25_P_ARP 0xcd /* ARPA Address Resolution */
#define AX25_P_FLEXNET 0xce /* FlexNet */
#define AX25_P_NETROM 0xcf /* NET/ROM */
#define AX25_P_TEXT 0xF0 /* No layer 3 protocol impl. */
/* AX.25 Segment control values */
#define AX25_SEG_REM 0x7F
#define AX25_SEG_FIRST 0x80
#define AX25_CBIT 0x80 /* Command/Response bit */
#define AX25_EBIT 0x01 /* HDLC Address Extension bit */
#define AX25_HBIT 0x80 /* Has been repeated bit */
#define AX25_SSSID_SPARE 0x60 /* Unused bits in SSID for standard AX.25 */
#define AX25_ESSID_SPARE 0x20 /* Unused bits in SSID for extended AX.25 */
#define AX25_DAMA_FLAG 0x20 /* Well, it is *NOT* unused! (dl1bke 951121 */
#define AX25_COND_ACK_PENDING 0x01
#define AX25_COND_REJECT 0x02
#define AX25_COND_PEER_RX_BUSY 0x04
#define AX25_COND_OWN_RX_BUSY 0x08
#define AX25_COND_DAMA_MODE 0x10
#ifndef _LINUX_NETDEVICE_H
#include <linux/netdevice.h>
#endif
/* Upper sub-layer (LAPB) definitions */
/* Control field templates */
#define AX25_I 0x00 /* Information frames */
#define AX25_S 0x01 /* Supervisory frames */
#define AX25_RR 0x01 /* Receiver ready */
#define AX25_RNR 0x05 /* Receiver not ready */
#define AX25_REJ 0x09 /* Reject */
#define AX25_U 0x03 /* Unnumbered frames */
#define AX25_SABM 0x2f /* Set Asynchronous Balanced Mode */
#define AX25_SABME 0x6f /* Set Asynchronous Balanced Mode Extended */
#define AX25_DISC 0x43 /* Disconnect */
#define AX25_DM 0x0f /* Disconnected mode */
#define AX25_UA 0x63 /* Unnumbered acknowledge */
#define AX25_FRMR 0x87 /* Frame reject */
#define AX25_UI 0x03 /* Unnumbered information */
#define AX25_XID 0xaf /* Exchange information */
#define AX25_TEST 0xe3 /* Test */
#define AX25_PF 0x10 /* Poll/final bit for standard AX.25 */
#define AX25_EPF 0x01 /* Poll/final bit for extended AX.25 */
#define AX25_ILLEGAL 0x100 /* Impossible to be a real frame type */
#define AX25_POLLOFF 0
#define AX25_POLLON 1
/* AX25 L2 C-bit */
#define AX25_COMMAND 1
#define AX25_RESPONSE 2
/* Define Link State constants. */
enum {
AX25_STATE_0, /* Listening */
AX25_STATE_1, /* SABM sent */
AX25_STATE_2, /* DISC sent */
AX25_STATE_3, /* Established */
AX25_STATE_4 /* Recovery */
};
#define AX25_MODULUS 8 /* Standard AX.25 modulus */
#define AX25_EMODULUS 128 /* Extended AX.25 modulus */
enum {
AX25_PROTO_STD_SIMPLEX,
AX25_PROTO_STD_DUPLEX,
#ifdef CONFIG_AX25_DAMA_SLAVE
AX25_PROTO_DAMA_SLAVE,
#ifdef CONFIG_AX25_DAMA_MASTER
AX25_PROTO_DAMA_MASTER,
#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER
#endif
#endif
__AX25_PROTO_MAX,
AX25_PROTO_MAX = __AX25_PROTO_MAX -1
};
enum {
AX25_VALUES_IPDEFMODE, /* 0=DG 1=VC */
AX25_VALUES_AXDEFMODE, /* 0=Normal 1=Extended Seq Nos */
AX25_VALUES_BACKOFF, /* 0=None 1=Linear 2=Exponential */
AX25_VALUES_CONMODE, /* Allow connected modes - 0=No 1=no "PID text" 2=all PIDs */
AX25_VALUES_WINDOW, /* Default window size for standard AX.25 */
AX25_VALUES_EWINDOW, /* Default window size for extended AX.25 */
AX25_VALUES_T1, /* Default T1 timeout value */
AX25_VALUES_T2, /* Default T2 timeout value */
AX25_VALUES_T3, /* Default T3 timeout value */
AX25_VALUES_IDLE, /* Connected mode idle timer */
AX25_VALUES_N2, /* Default N2 value */
AX25_VALUES_PACLEN, /* AX.25 MTU */
AX25_VALUES_PROTOCOL, /* Std AX.25, DAMA Slave, DAMA Master */
AX25_VALUES_DS_TIMEOUT, /* DAMA Slave timeout */
AX25_MAX_VALUES /* THIS MUST REMAIN THE LAST ENTRY OF THIS LIST */
};
#define AX25_DEF_IPDEFMODE 0 /* Datagram */
#define AX25_DEF_AXDEFMODE 0 /* Normal */
#define AX25_DEF_BACKOFF 1 /* Linear backoff */
#define AX25_DEF_CONMODE 2 /* Connected mode allowed */
#define AX25_DEF_WINDOW 2 /* Window=2 */
#define AX25_DEF_EWINDOW 32 /* Module-128 Window=32 */
#define AX25_DEF_T1 10000 /* T1=10s */
#define AX25_DEF_T2 3000 /* T2=3s */
#define AX25_DEF_T3 300000 /* T3=300s */
#define AX25_DEF_N2 10 /* N2=10 */
#define AX25_DEF_IDLE 0 /* Idle=None */
#define AX25_DEF_PACLEN 256 /* Paclen=256 */
#define AX25_DEF_PROTOCOL AX25_PROTO_STD_SIMPLEX /* Standard AX.25 */
#define AX25_DEF_DS_TIMEOUT 180000 /* DAMA timeout 3 minutes */
typedef struct ax25_uid_assoc {
struct hlist_node uid_node;
refcount_t refcount;
kuid_t uid;
ax25_address call;
} ax25_uid_assoc;
#define ax25_uid_for_each(__ax25, list) \
hlist_for_each_entry(__ax25, list, uid_node)
#define ax25_uid_hold(ax25) \
refcount_inc(&((ax25)->refcount))
static inline void ax25_uid_put(ax25_uid_assoc *assoc)
{
if (refcount_dec_and_test(&assoc->refcount)) {
kfree(assoc);
}
}
typedef struct {
ax25_address calls[AX25_MAX_DIGIS];
unsigned char repeated[AX25_MAX_DIGIS];
unsigned char ndigi;
signed char lastrepeat;
} ax25_digi;
typedef struct ax25_route {
struct ax25_route *next;
refcount_t refcount;
ax25_address callsign;
struct net_device *dev;
ax25_digi *digipeat;
char ip_mode;
} ax25_route;
static inline void ax25_hold_route(ax25_route *ax25_rt)
{
refcount_inc(&ax25_rt->refcount);
}
void __ax25_put_route(ax25_route *ax25_rt);
static inline void ax25_put_route(ax25_route *ax25_rt)
{
if (refcount_dec_and_test(&ax25_rt->refcount))
__ax25_put_route(ax25_rt);
}
typedef struct {
char slave; /* slave_mode? */
struct timer_list slave_timer; /* timeout timer */
unsigned short slave_timeout; /* when? */
} ax25_dama_info;
struct ctl_table;
typedef struct ax25_dev {
struct ax25_dev *next;
struct net_device *dev;
struct net_device *forward;
struct ctl_table_header *sysheader;
int values[AX25_MAX_VALUES];
#if defined(CONFIG_AX25_DAMA_SLAVE) || defined(CONFIG_AX25_DAMA_MASTER)
ax25_dama_info dama;
#endif
} ax25_dev;
typedef struct ax25_cb {
struct hlist_node ax25_node;
ax25_address source_addr, dest_addr;
ax25_digi *digipeat;
ax25_dev *ax25_dev;
unsigned char iamdigi;
unsigned char state, modulus, pidincl;
unsigned short vs, vr, va;
unsigned char condition, backoff;
unsigned char n2, n2count;
struct timer_list t1timer, t2timer, t3timer, idletimer;
unsigned long t1, t2, t3, idle, rtt;
unsigned short paclen, fragno, fraglen;
struct sk_buff_head write_queue;
struct sk_buff_head reseq_queue;
struct sk_buff_head ack_queue;
struct sk_buff_head frag_queue;
unsigned char window;
struct timer_list timer, dtimer;
struct sock *sk; /* Backlink to socket */
refcount_t refcount;
} ax25_cb;
struct ax25_sock {
struct sock sk;
struct ax25_cb *cb;
};
static inline struct ax25_sock *ax25_sk(const struct sock *sk)
{
return (struct ax25_sock *) sk;
}
static inline struct ax25_cb *sk_to_ax25(const struct sock *sk)
{
return ax25_sk(sk)->cb;
}
#define ax25_for_each(__ax25, list) \
hlist_for_each_entry(__ax25, list, ax25_node)
#define ax25_cb_hold(__ax25) \
refcount_inc(&((__ax25)->refcount))
static __inline__ void ax25_cb_put(ax25_cb *ax25)
{
if (refcount_dec_and_test(&ax25->refcount)) {
kfree(ax25->digipeat);
kfree(ax25);
}
}
static inline __be16 ax25_type_trans(struct sk_buff *skb, struct net_device *dev)
{
skb->dev = dev;
skb_reset_mac_header(skb);
skb->pkt_type = PACKET_HOST;
return htons(ETH_P_AX25);
}
/* af_ax25.c */
extern struct hlist_head ax25_list;
extern spinlock_t ax25_list_lock;
void ax25_cb_add(ax25_cb *);
struct sock *ax25_find_listener(ax25_address *, int, struct net_device *, int);
struct sock *ax25_get_socket(ax25_address *, ax25_address *, int);
ax25_cb *ax25_find_cb(ax25_address *, ax25_address *, ax25_digi *,
struct net_device *);
void ax25_send_to_raw(ax25_address *, struct sk_buff *, int);
void ax25_destroy_socket(ax25_cb *);
ax25_cb * __must_check ax25_create_cb(void);
void ax25_fillin_cb(ax25_cb *, ax25_dev *);
struct sock *ax25_make_new(struct sock *, struct ax25_dev *);
/* ax25_addr.c */
extern const ax25_address ax25_bcast;
extern const ax25_address ax25_defaddr;
extern const ax25_address null_ax25_address;
char *ax2asc(char *buf, const ax25_address *);
void asc2ax(ax25_address *addr, const char *callsign);
int ax25cmp(const ax25_address *, const ax25_address *);
int ax25digicmp(const ax25_digi *, const ax25_digi *);
const unsigned char *ax25_addr_parse(const unsigned char *, int,
ax25_address *, ax25_address *, ax25_digi *, int *, int *);
int ax25_addr_build(unsigned char *, const ax25_address *,
const ax25_address *, const ax25_digi *, int, int);
int ax25_addr_size(const ax25_digi *);
void ax25_digi_invert(const ax25_digi *, ax25_digi *);
/* ax25_dev.c */
extern ax25_dev *ax25_dev_list;
extern spinlock_t ax25_dev_lock;
static inline ax25_dev *ax25_dev_ax25dev(struct net_device *dev)
{
return dev->ax25_ptr;
}
ax25_dev *ax25_addr_ax25dev(ax25_address *);
void ax25_dev_device_up(struct net_device *);
void ax25_dev_device_down(struct net_device *);
int ax25_fwd_ioctl(unsigned int, struct ax25_fwd_struct *);
struct net_device *ax25_fwd_dev(struct net_device *);
void ax25_dev_free(void);
/* ax25_ds_in.c */
int ax25_ds_frame_in(ax25_cb *, struct sk_buff *, int);
/* ax25_ds_subr.c */
void ax25_ds_nr_error_recovery(ax25_cb *);
void ax25_ds_enquiry_response(ax25_cb *);
void ax25_ds_establish_data_link(ax25_cb *);
void ax25_dev_dama_off(ax25_dev *);
void ax25_dama_on(ax25_cb *);
void ax25_dama_off(ax25_cb *);
/* ax25_ds_timer.c */
void ax25_ds_setup_timer(ax25_dev *);
void ax25_ds_set_timer(ax25_dev *);
void ax25_ds_del_timer(ax25_dev *);
void ax25_ds_timer(ax25_cb *);
void ax25_ds_t1_timeout(ax25_cb *);
void ax25_ds_heartbeat_expiry(ax25_cb *);
void ax25_ds_t3timer_expiry(ax25_cb *);
void ax25_ds_idletimer_expiry(ax25_cb *);
/* ax25_iface.c */
struct ax25_protocol {
struct ax25_protocol *next;
unsigned int pid;
int (*func)(struct sk_buff *, ax25_cb *);
};
void ax25_register_pid(struct ax25_protocol *ap);
void ax25_protocol_release(unsigned int);
struct ax25_linkfail {
struct hlist_node lf_node;
void (*func)(ax25_cb *, int);
};
void ax25_linkfail_register(struct ax25_linkfail *lf);
void ax25_linkfail_release(struct ax25_linkfail *lf);
int __must_check ax25_listen_register(ax25_address *, struct net_device *);
void ax25_listen_release(ax25_address *, struct net_device *);
int(*ax25_protocol_function(unsigned int))(struct sk_buff *, ax25_cb *);
int ax25_listen_mine(ax25_address *, struct net_device *);
void ax25_link_failed(ax25_cb *, int);
int ax25_protocol_is_registered(unsigned int);
/* ax25_in.c */
int ax25_rx_iframe(ax25_cb *, struct sk_buff *);
int ax25_kiss_rcv(struct sk_buff *, struct net_device *, struct packet_type *,
struct net_device *);
/* ax25_ip.c */
netdev_tx_t ax25_ip_xmit(struct sk_buff *skb);
extern const struct header_ops ax25_header_ops;
/* ax25_out.c */
ax25_cb *ax25_send_frame(struct sk_buff *, int, ax25_address *, ax25_address *,
ax25_digi *, struct net_device *);
void ax25_output(ax25_cb *, int, struct sk_buff *);
void ax25_kick(ax25_cb *);
void ax25_transmit_buffer(ax25_cb *, struct sk_buff *, int);
void ax25_queue_xmit(struct sk_buff *skb, struct net_device *dev);
int ax25_check_iframes_acked(ax25_cb *, unsigned short);
/* ax25_route.c */
void ax25_rt_device_down(struct net_device *);
int ax25_rt_ioctl(unsigned int, void __user *);
extern const struct file_operations ax25_route_fops;
ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev);
int ax25_rt_autobind(ax25_cb *, ax25_address *);
struct sk_buff *ax25_rt_build_path(struct sk_buff *, ax25_address *,
ax25_address *, ax25_digi *);
void ax25_rt_free(void);
/* ax25_std_in.c */
int ax25_std_frame_in(ax25_cb *, struct sk_buff *, int);
/* ax25_std_subr.c */
void ax25_std_nr_error_recovery(ax25_cb *);
void ax25_std_establish_data_link(ax25_cb *);
void ax25_std_transmit_enquiry(ax25_cb *);
void ax25_std_enquiry_response(ax25_cb *);
void ax25_std_timeout_response(ax25_cb *);
/* ax25_std_timer.c */
void ax25_std_heartbeat_expiry(ax25_cb *);
void ax25_std_t1timer_expiry(ax25_cb *);
void ax25_std_t2timer_expiry(ax25_cb *);
void ax25_std_t3timer_expiry(ax25_cb *);
void ax25_std_idletimer_expiry(ax25_cb *);
/* ax25_subr.c */
void ax25_clear_queues(ax25_cb *);
void ax25_frames_acked(ax25_cb *, unsigned short);
void ax25_requeue_frames(ax25_cb *);
int ax25_validate_nr(ax25_cb *, unsigned short);
int ax25_decode(ax25_cb *, struct sk_buff *, int *, int *, int *);
void ax25_send_control(ax25_cb *, int, int, int);
void ax25_return_dm(struct net_device *, ax25_address *, ax25_address *,
ax25_digi *);
void ax25_calculate_t1(ax25_cb *);
void ax25_calculate_rtt(ax25_cb *);
void ax25_disconnect(ax25_cb *, int);
/* ax25_timer.c */
void ax25_setup_timers(ax25_cb *);
void ax25_start_heartbeat(ax25_cb *);
void ax25_start_t1timer(ax25_cb *);
void ax25_start_t2timer(ax25_cb *);
void ax25_start_t3timer(ax25_cb *);
void ax25_start_idletimer(ax25_cb *);
void ax25_stop_heartbeat(ax25_cb *);
void ax25_stop_t1timer(ax25_cb *);
void ax25_stop_t2timer(ax25_cb *);
void ax25_stop_t3timer(ax25_cb *);
void ax25_stop_idletimer(ax25_cb *);
int ax25_t1timer_running(ax25_cb *);
unsigned long ax25_display_timer(struct timer_list *);
/* ax25_uid.c */
extern int ax25_uid_policy;
ax25_uid_assoc *ax25_findbyuid(kuid_t);
int __must_check ax25_uid_ioctl(int, struct sockaddr_ax25 *);
extern const struct file_operations ax25_uid_fops;
void ax25_uid_free(void);
/* sysctl_net_ax25.c */
#ifdef CONFIG_SYSCTL
int ax25_register_dev_sysctl(ax25_dev *ax25_dev);
void ax25_unregister_dev_sysctl(ax25_dev *ax25_dev);
#else
static inline int ax25_register_dev_sysctl(ax25_dev *ax25_dev) { return 0; }
static inline void ax25_unregister_dev_sysctl(ax25_dev *ax25_dev) {}
#endif /* CONFIG_SYSCTL */
#endif
View Git Blame Copy Permalink