AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
0fcf12d510
kernel_optimize_test/drivers/media/video/vpx3220.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

623 lines
15 KiB
C
Raw Blame History

/*
* vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1
*
* Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver");
MODULE_AUTHOR("Laurent Pinchart");
MODULE_LICENSE("GPL");
static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define VPX_TIMEOUT_COUNT 10
/* ----------------------------------------------------------------------- */
struct vpx3220 {
struct v4l2_subdev sd;
unsigned char reg[255];
v4l2_std_id norm;
int ident;
int input;
int enable;
int bright;
int contrast;
int hue;
int sat;
};
static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd)
{
return container_of(sd, struct vpx3220, sd);
}
static char *inputs[] = { "internal", "composite", "svideo" };
/* ----------------------------------------------------------------------- */
static inline int vpx3220_write(struct v4l2_subdev *sd, u8 reg, u8 value)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct vpx3220 *decoder = i2c_get_clientdata(client);
decoder->reg[reg] = value;
return i2c_smbus_write_byte_data(client, reg, value);
}
static inline int vpx3220_read(struct v4l2_subdev *sd, u8 reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
return i2c_smbus_read_byte_data(client, reg);
}
static int vpx3220_fp_status(struct v4l2_subdev *sd)
{
unsigned char status;
unsigned int i;
for (i = 0; i < VPX_TIMEOUT_COUNT; i++) {
status = vpx3220_read(sd, 0x29);
if (!(status & 4))
return 0;
udelay(10);
if (need_resched())
cond_resched();
}
return -1;
}
static int vpx3220_fp_write(struct v4l2_subdev *sd, u8 fpaddr, u16 data)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
/* Write the 16-bit address to the FPWR register */
if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) {
v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
return -1;
}
if (vpx3220_fp_status(sd) < 0)
return -1;
/* Write the 16-bit data to the FPDAT register */
if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) {
v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
return -1;
}
return 0;
}
static u16 vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
s16 data;
/* Write the 16-bit address to the FPRD register */
if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) {
v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
return -1;
}
if (vpx3220_fp_status(sd) < 0)
return -1;
/* Read the 16-bit data from the FPDAT register */
data = i2c_smbus_read_word_data(client, 0x28);
if (data == -1) {
v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
return -1;
}
return swab16(data);
}
static int vpx3220_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len)
{
u8 reg;
int ret = -1;
while (len >= 2) {
reg = *data++;
ret = vpx3220_write(sd, reg, *data++);
if (ret < 0)
break;
len -= 2;
}
return ret;
}
static int vpx3220_write_fp_block(struct v4l2_subdev *sd,
const u16 *data, unsigned int len)
{
u8 reg;
int ret = 0;
while (len > 1) {
reg = *data++;
ret |= vpx3220_fp_write(sd, reg, *data++);
len -= 2;
}
return ret;
}
/* ---------------------------------------------------------------------- */
static const unsigned short init_ntsc[] = {
0x1c, 0x00, /* NTSC tint angle */
0x88, 17, /* Window 1 vertical */
0x89, 240, /* Vertical lines in */
0x8a, 240, /* Vertical lines out */
0x8b, 000, /* Horizontal begin */
0x8c, 640, /* Horizontal length */
0x8d, 640, /* Number of pixels */
0x8f, 0xc00, /* Disable window 2 */
0xf0, 0x73, /* 13.5 MHz transport, Forced
* mode, latch windows */
0xf2, 0x13, /* NTSC M, composite input */
0xe7, 0x1e1, /* Enable vertical standard
* locking @ 240 lines */
};
static const unsigned short init_pal[] = {
0x88, 23, /* Window 1 vertical begin */
0x89, 288, /* Vertical lines in (16 lines
* skipped by the VFE) */
0x8a, 288, /* Vertical lines out (16 lines
* skipped by the VFE) */
0x8b, 16, /* Horizontal begin */
0x8c, 768, /* Horizontal length */
0x8d, 784, /* Number of pixels
* Must be >= Horizontal begin + Horizontal length */
0x8f, 0xc00, /* Disable window 2 */
0xf0, 0x77, /* 13.5 MHz transport, Forced
* mode, latch windows */
0xf2, 0x3d1, /* PAL B,G,H,I, composite input */
0xe7, 0x241, /* PAL/SECAM set to 288 lines */
};
static const unsigned short init_secam[] = {
0x88, 23, /* Window 1 vertical begin */
0x89, 288, /* Vertical lines in (16 lines
* skipped by the VFE) */
0x8a, 288, /* Vertical lines out (16 lines
* skipped by the VFE) */
0x8b, 16, /* Horizontal begin */
0x8c, 768, /* Horizontal length */
0x8d, 784, /* Number of pixels
* Must be >= Horizontal begin + Horizontal length */
0x8f, 0xc00, /* Disable window 2 */
0xf0, 0x77, /* 13.5 MHz transport, Forced
* mode, latch windows */
0xf2, 0x3d5, /* SECAM, composite input */
0xe7, 0x241, /* PAL/SECAM set to 288 lines */
};
static const unsigned char init_common[] = {
0xf2, 0x00, /* Disable all outputs */
0x33, 0x0d, /* Luma : VIN2, Chroma : CIN
* (clamp off) */
0xd8, 0xa8, /* HREF/VREF active high, VREF
* pulse = 2, Odd/Even flag */
0x20, 0x03, /* IF compensation 0dB/oct */
0xe0, 0xff, /* Open up all comparators */
0xe1, 0x00,
0xe2, 0x7f,
0xe3, 0x80,
0xe4, 0x7f,
0xe5, 0x80,
0xe6, 0x00, /* Brightness set to 0 */
0xe7, 0xe0, /* Contrast to 1.0, noise shaping
* 10 to 8 2-bit error diffusion */
0xe8, 0xf8, /* YUV422, CbCr binary offset,
* ... (p.32) */
0xea, 0x18, /* LLC2 connected, output FIFO
* reset with VACTintern */
0xf0, 0x8a, /* Half full level to 10, bus
* shuffler [7:0, 23:16, 15:8] */
0xf1, 0x18, /* Single clock, sync mode, no
* FE delay, no HLEN counter */
0xf8, 0x12, /* Port A, PIXCLK, HF# & FE#
* strength to 2 */
0xf9, 0x24, /* Port B, HREF, VREF, PREF &
* ALPHA strength to 4 */
};
static const unsigned short init_fp[] = {
0x59, 0,
0xa0, 2070, /* ACC reference */
0xa3, 0,
0xa4, 0,
0xa8, 30,
0xb2, 768,
0xbe, 27,
0x58, 0,
0x26, 0,
0x4b, 0x298, /* PLL gain */
};
static int vpx3220_init(struct v4l2_subdev *sd, u32 val)
{
struct vpx3220 *decoder = to_vpx3220(sd);
vpx3220_write_block(sd, init_common, sizeof(init_common));
vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1);
if (decoder->norm & V4L2_STD_NTSC)
vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1);
else if (decoder->norm & V4L2_STD_PAL)
vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
else if (decoder->norm & V4L2_STD_SECAM)
vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1);
else
vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
return 0;
}
static int vpx3220_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
{
int res = V4L2_IN_ST_NO_SIGNAL, status;
v4l2_std_id std = 0;
status = vpx3220_fp_read(sd, 0x0f3);
v4l2_dbg(1, debug, sd, "status: 0x%04x\n", status);
if (status < 0)
return status;
if ((status & 0x20) == 0) {
res = 0;
switch (status & 0x18) {
case 0x00:
case 0x10:
case 0x14:
case 0x18:
std = V4L2_STD_PAL;
break;
case 0x08:
std = V4L2_STD_SECAM;
break;
case 0x04:
case 0x0c:
case 0x1c:
std = V4L2_STD_NTSC;
break;
}
}
if (pstd)
*pstd = std;
if (pstatus)
*pstatus = status;
return 0;
}
static int vpx3220_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
{
v4l2_dbg(1, debug, sd, "querystd\n");
return vpx3220_status(sd, NULL, std);
}
static int vpx3220_g_input_status(struct v4l2_subdev *sd, u32 *status)
{
v4l2_dbg(1, debug, sd, "g_input_status\n");
return vpx3220_status(sd, status, NULL);
}
static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct vpx3220 *decoder = to_vpx3220(sd);
int temp_input;
/* Here we back up the input selection because it gets
overwritten when we fill the registers with the
choosen video norm */
temp_input = vpx3220_fp_read(sd, 0xf2);
v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std);
if (std & V4L2_STD_NTSC) {
vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1);
v4l2_dbg(1, debug, sd, "norm switched to NTSC\n");
} else if (std & V4L2_STD_PAL) {
vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
v4l2_dbg(1, debug, sd, "norm switched to PAL\n");
} else if (std & V4L2_STD_SECAM) {
vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1);
v4l2_dbg(1, debug, sd, "norm switched to SECAM\n");
} else {
return -EINVAL;
}
decoder->norm = std;
/* And here we set the backed up video input again */
vpx3220_fp_write(sd, 0xf2, temp_input | 0x0010);
udelay(10);
return 0;
}
static int vpx3220_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
int data;
/* RJ: input = 0: ST8 (PCTV) input
input = 1: COMPOSITE input
input = 2: SVHS input */
const int input_vals[3][2] = {
{0x0c, 0},
{0x0d, 0},
{0x0e, 1}
};
if (input > 2)
return -EINVAL;
v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[input]);
vpx3220_write(sd, 0x33, input_vals[input][0]);
data = vpx3220_fp_read(sd, 0xf2) & ~(0x0020);
if (data < 0)
return data;
/* 0x0010 is required to latch the setting */
vpx3220_fp_write(sd, 0xf2,
data | (input_vals[input][1] << 5) | 0x0010);
udelay(10);
return 0;
}
static int vpx3220_s_stream(struct v4l2_subdev *sd, int enable)
{
v4l2_dbg(1, debug, sd, "s_stream %s\n", enable ? "on" : "off");
vpx3220_write(sd, 0xf2, (enable ? 0x1b : 0x00));
return 0;
}
static int vpx3220_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
{
switch (qc->id) {
case V4L2_CID_BRIGHTNESS:
v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
break;
case V4L2_CID_CONTRAST:
v4l2_ctrl_query_fill(qc, 0, 63, 1, 32);
break;
case V4L2_CID_SATURATION:
v4l2_ctrl_query_fill(qc, 0, 4095, 1, 2048);
break;
case V4L2_CID_HUE:
v4l2_ctrl_query_fill(qc, -512, 511, 1, 0);
break;
default:
return -EINVAL;
}
return 0;
}
static int vpx3220_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct vpx3220 *decoder = to_vpx3220(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->value = decoder->bright;
break;
case V4L2_CID_CONTRAST:
ctrl->value = decoder->contrast;
break;
case V4L2_CID_SATURATION:
ctrl->value = decoder->sat;
break;
case V4L2_CID_HUE:
ctrl->value = decoder->hue;
break;
default:
return -EINVAL;
}
return 0;
}
static int vpx3220_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct vpx3220 *decoder = to_vpx3220(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
if (decoder->bright != ctrl->value) {
decoder->bright = ctrl->value;
vpx3220_write(sd, 0xe6, decoder->bright);
}
break;
case V4L2_CID_CONTRAST:
if (decoder->contrast != ctrl->value) {
/* Bit 7 and 8 is for noise shaping */
decoder->contrast = ctrl->value;
vpx3220_write(sd, 0xe7, decoder->contrast + 192);
}
break;
case V4L2_CID_SATURATION:
if (decoder->sat != ctrl->value) {
decoder->sat = ctrl->value;
vpx3220_fp_write(sd, 0xa0, decoder->sat);
}
break;
case V4L2_CID_HUE:
if (decoder->hue != ctrl->value) {
decoder->hue = ctrl->value;
vpx3220_fp_write(sd, 0x1c, decoder->hue);
}
break;
default:
return -EINVAL;
}
return 0;
}
static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct vpx3220 *decoder = to_vpx3220(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0);
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops vpx3220_core_ops = {
.g_chip_ident = vpx3220_g_chip_ident,
.init = vpx3220_init,
.g_ctrl = vpx3220_g_ctrl,
.s_ctrl = vpx3220_s_ctrl,
.queryctrl = vpx3220_queryctrl,
.s_std = vpx3220_s_std,
};
static const struct v4l2_subdev_video_ops vpx3220_video_ops = {
.s_routing = vpx3220_s_routing,
.s_stream = vpx3220_s_stream,
.querystd = vpx3220_querystd,
.g_input_status = vpx3220_g_input_status,
};
static const struct v4l2_subdev_ops vpx3220_ops = {
.core = &vpx3220_core_ops,
.video = &vpx3220_video_ops,
};
/* -----------------------------------------------------------------------
* Client management code
*/
static int vpx3220_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct vpx3220 *decoder;
struct v4l2_subdev *sd;
const char *name = NULL;
u8 ver;
u16 pn;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL);
if (decoder == NULL)
return -ENOMEM;
sd = &decoder->sd;
v4l2_i2c_subdev_init(sd, client, &vpx3220_ops);
decoder->norm = V4L2_STD_PAL;
decoder->input = 0;
decoder->enable = 1;
decoder->bright = 32768;
decoder->contrast = 32768;
decoder->hue = 32768;
decoder->sat = 32768;
ver = i2c_smbus_read_byte_data(client, 0x00);
pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) +
i2c_smbus_read_byte_data(client, 0x01);
decoder->ident = V4L2_IDENT_VPX3220A;
if (ver == 0xec) {
switch (pn) {
case 0x4680:
name = "vpx3220a";
break;
case 0x4260:
name = "vpx3216b";
decoder->ident = V4L2_IDENT_VPX3216B;
break;
case 0x4280:
name = "vpx3214c";
decoder->ident = V4L2_IDENT_VPX3214C;
break;
}
}
if (name)
v4l2_info(sd, "%s found @ 0x%x (%s)\n", name,
client->addr << 1, client->adapter->name);
else
v4l2_info(sd, "chip (%02x:%04x) found @ 0x%x (%s)\n",
ver, pn, client->addr << 1, client->adapter->name);
vpx3220_write_block(sd, init_common, sizeof(init_common));
vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1);
/* Default to PAL */
vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
return 0;
}
static int vpx3220_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
kfree(to_vpx3220(sd));
return 0;
}
static const struct i2c_device_id vpx3220_id[] = {
{ "vpx3220a", 0 },
{ "vpx3216b", 0 },
{ "vpx3214c", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, vpx3220_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "vpx3220",
.probe = vpx3220_probe,
.remove = vpx3220_remove,
.id_table = vpx3220_id,
};
View Git Blame Copy Permalink