forked from luck/tmp_suning_uos_patched
bf9a9f8e51
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
369 lines
9.2 KiB
C
369 lines
9.2 KiB
C
/*
|
|
* Synaptics NavPoint (PXA27x SSP/SPI) driver.
|
|
*
|
|
* Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/navpoint.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/pxa2xx_ssp.h>
|
|
#include <linux/slab.h>
|
|
|
|
/*
|
|
* Synaptics Modular Embedded Protocol: Module Packet Format.
|
|
* Module header byte 2:0 = Length (# bytes that follow)
|
|
* Module header byte 4:3 = Control
|
|
* Module header byte 7:5 = Module Address
|
|
*/
|
|
#define HEADER_LENGTH(byte) ((byte) & 0x07)
|
|
#define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03)
|
|
#define HEADER_ADDRESS(byte) ((byte) >> 5)
|
|
|
|
struct navpoint {
|
|
struct ssp_device *ssp;
|
|
struct input_dev *input;
|
|
struct device *dev;
|
|
int gpio;
|
|
int index;
|
|
u8 data[1 + HEADER_LENGTH(0xff)];
|
|
};
|
|
|
|
/*
|
|
* Initialization values for SSCR0_x, SSCR1_x, SSSR_x.
|
|
*/
|
|
static const u32 sscr0 = 0
|
|
| SSCR0_TUM /* TIM = 1; No TUR interrupts */
|
|
| SSCR0_RIM /* RIM = 1; No ROR interrupts */
|
|
| SSCR0_SSE /* SSE = 1; SSP enabled */
|
|
| SSCR0_Motorola /* FRF = 0; Motorola SPI */
|
|
| SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */
|
|
;
|
|
static const u32 sscr1 = 0
|
|
| SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */
|
|
| SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */
|
|
| SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */
|
|
| SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */
|
|
| SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */
|
|
| SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */
|
|
| SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */
|
|
;
|
|
static const u32 sssr = 0
|
|
| SSSR_BCE /* BCE = 1; Clear BCE */
|
|
| SSSR_TUR /* TUR = 1; Clear TUR */
|
|
| SSSR_EOC /* EOC = 1; Clear EOC */
|
|
| SSSR_TINT /* TINT = 1; Clear TINT */
|
|
| SSSR_PINT /* PINT = 1; Clear PINT */
|
|
| SSSR_ROR /* ROR = 1; Clear ROR */
|
|
;
|
|
|
|
/*
|
|
* MEP Query $22: Touchpad Coordinate Range Query is not supported by
|
|
* the NavPoint module, so sampled values provide the default limits.
|
|
*/
|
|
#define NAVPOINT_X_MIN 1278
|
|
#define NAVPOINT_X_MAX 5340
|
|
#define NAVPOINT_Y_MIN 1572
|
|
#define NAVPOINT_Y_MAX 4396
|
|
#define NAVPOINT_PRESSURE_MIN 0
|
|
#define NAVPOINT_PRESSURE_MAX 255
|
|
|
|
static void navpoint_packet(struct navpoint *navpoint)
|
|
{
|
|
int finger;
|
|
int gesture;
|
|
int x, y, z;
|
|
|
|
switch (navpoint->data[0]) {
|
|
case 0xff: /* Garbage (packet?) between reset and Hello packet */
|
|
case 0x00: /* Module 0, NULL packet */
|
|
break;
|
|
|
|
case 0x0e: /* Module 0, Absolute packet */
|
|
finger = (navpoint->data[1] & 0x01);
|
|
gesture = (navpoint->data[1] & 0x02);
|
|
x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3];
|
|
y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5];
|
|
z = navpoint->data[6];
|
|
input_report_key(navpoint->input, BTN_TOUCH, finger);
|
|
input_report_abs(navpoint->input, ABS_X, x);
|
|
input_report_abs(navpoint->input, ABS_Y, y);
|
|
input_report_abs(navpoint->input, ABS_PRESSURE, z);
|
|
input_report_key(navpoint->input, BTN_TOOL_FINGER, finger);
|
|
input_report_key(navpoint->input, BTN_LEFT, gesture);
|
|
input_sync(navpoint->input);
|
|
break;
|
|
|
|
case 0x19: /* Module 0, Hello packet */
|
|
if ((navpoint->data[1] & 0xf0) == 0x10)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
default:
|
|
dev_warn(navpoint->dev,
|
|
"spurious packet: data=0x%02x,0x%02x,...\n",
|
|
navpoint->data[0], navpoint->data[1]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t navpoint_irq(int irq, void *dev_id)
|
|
{
|
|
struct navpoint *navpoint = dev_id;
|
|
struct ssp_device *ssp = navpoint->ssp;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 status;
|
|
|
|
status = pxa_ssp_read_reg(ssp, SSSR);
|
|
if (status & sssr) {
|
|
dev_warn(navpoint->dev,
|
|
"unexpected interrupt: status=0x%08x\n", status);
|
|
pxa_ssp_write_reg(ssp, SSSR, (status & sssr));
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
while (status & SSSR_RNE) {
|
|
u32 data;
|
|
|
|
data = pxa_ssp_read_reg(ssp, SSDR);
|
|
navpoint->data[navpoint->index + 0] = (data >> 8);
|
|
navpoint->data[navpoint->index + 1] = data;
|
|
navpoint->index += 2;
|
|
if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) {
|
|
navpoint_packet(navpoint);
|
|
navpoint->index = 0;
|
|
}
|
|
status = pxa_ssp_read_reg(ssp, SSSR);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void navpoint_up(struct navpoint *navpoint)
|
|
{
|
|
struct ssp_device *ssp = navpoint->ssp;
|
|
int timeout;
|
|
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
pxa_ssp_write_reg(ssp, SSSR, sssr);
|
|
pxa_ssp_write_reg(ssp, SSTO, 0);
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */
|
|
|
|
/* Wait until SSP port is ready for slave clock operations */
|
|
for (timeout = 100; timeout != 0; --timeout) {
|
|
if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS))
|
|
break;
|
|
msleep(1);
|
|
}
|
|
|
|
if (timeout == 0)
|
|
dev_err(navpoint->dev,
|
|
"timeout waiting for SSSR[CSS] to clear\n");
|
|
|
|
if (gpio_is_valid(navpoint->gpio))
|
|
gpio_set_value(navpoint->gpio, 1);
|
|
}
|
|
|
|
static void navpoint_down(struct navpoint *navpoint)
|
|
{
|
|
struct ssp_device *ssp = navpoint->ssp;
|
|
|
|
if (gpio_is_valid(navpoint->gpio))
|
|
gpio_set_value(navpoint->gpio, 0);
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR0, 0);
|
|
|
|
clk_disable_unprepare(ssp->clk);
|
|
}
|
|
|
|
static int navpoint_open(struct input_dev *input)
|
|
{
|
|
struct navpoint *navpoint = input_get_drvdata(input);
|
|
|
|
navpoint_up(navpoint);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void navpoint_close(struct input_dev *input)
|
|
{
|
|
struct navpoint *navpoint = input_get_drvdata(input);
|
|
|
|
navpoint_down(navpoint);
|
|
}
|
|
|
|
static int navpoint_probe(struct platform_device *pdev)
|
|
{
|
|
const struct navpoint_platform_data *pdata =
|
|
dev_get_platdata(&pdev->dev);
|
|
struct ssp_device *ssp;
|
|
struct input_dev *input;
|
|
struct navpoint *navpoint;
|
|
int error;
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "no platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (gpio_is_valid(pdata->gpio)) {
|
|
error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW,
|
|
"SYNAPTICS_ON");
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
ssp = pxa_ssp_request(pdata->port, pdev->name);
|
|
if (!ssp) {
|
|
error = -ENODEV;
|
|
goto err_free_gpio;
|
|
}
|
|
|
|
/* HaRET does not disable devices before jumping into Linux */
|
|
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
|
|
pxa_ssp_write_reg(ssp, SSCR0, 0);
|
|
dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port);
|
|
}
|
|
|
|
navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL);
|
|
input = input_allocate_device();
|
|
if (!navpoint || !input) {
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
navpoint->ssp = ssp;
|
|
navpoint->input = input;
|
|
navpoint->dev = &pdev->dev;
|
|
navpoint->gpio = pdata->gpio;
|
|
|
|
input->name = pdev->name;
|
|
input->dev.parent = &pdev->dev;
|
|
|
|
__set_bit(EV_KEY, input->evbit);
|
|
__set_bit(EV_ABS, input->evbit);
|
|
__set_bit(BTN_LEFT, input->keybit);
|
|
__set_bit(BTN_TOUCH, input->keybit);
|
|
__set_bit(BTN_TOOL_FINGER, input->keybit);
|
|
|
|
input_set_abs_params(input, ABS_X,
|
|
NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0);
|
|
input_set_abs_params(input, ABS_Y,
|
|
NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0);
|
|
input_set_abs_params(input, ABS_PRESSURE,
|
|
NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX,
|
|
0, 0);
|
|
|
|
input->open = navpoint_open;
|
|
input->close = navpoint_close;
|
|
|
|
input_set_drvdata(input, navpoint);
|
|
|
|
error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint);
|
|
if (error)
|
|
goto err_free_mem;
|
|
|
|
error = input_register_device(input);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
platform_set_drvdata(pdev, navpoint);
|
|
dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq);
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(ssp->irq, navpoint);
|
|
err_free_mem:
|
|
input_free_device(input);
|
|
kfree(navpoint);
|
|
pxa_ssp_free(ssp);
|
|
err_free_gpio:
|
|
if (gpio_is_valid(pdata->gpio))
|
|
gpio_free(pdata->gpio);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int navpoint_remove(struct platform_device *pdev)
|
|
{
|
|
const struct navpoint_platform_data *pdata =
|
|
dev_get_platdata(&pdev->dev);
|
|
struct navpoint *navpoint = platform_get_drvdata(pdev);
|
|
struct ssp_device *ssp = navpoint->ssp;
|
|
|
|
free_irq(ssp->irq, navpoint);
|
|
|
|
input_unregister_device(navpoint->input);
|
|
kfree(navpoint);
|
|
|
|
pxa_ssp_free(ssp);
|
|
|
|
if (gpio_is_valid(pdata->gpio))
|
|
gpio_free(pdata->gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int navpoint_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct navpoint *navpoint = platform_get_drvdata(pdev);
|
|
struct input_dev *input = navpoint->input;
|
|
|
|
mutex_lock(&input->mutex);
|
|
if (input->users)
|
|
navpoint_down(navpoint);
|
|
mutex_unlock(&input->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int navpoint_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct navpoint *navpoint = platform_get_drvdata(pdev);
|
|
struct input_dev *input = navpoint->input;
|
|
|
|
mutex_lock(&input->mutex);
|
|
if (input->users)
|
|
navpoint_up(navpoint);
|
|
mutex_unlock(&input->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume);
|
|
|
|
static struct platform_driver navpoint_driver = {
|
|
.probe = navpoint_probe,
|
|
.remove = navpoint_remove,
|
|
.driver = {
|
|
.name = "navpoint",
|
|
.owner = THIS_MODULE,
|
|
.pm = &navpoint_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(navpoint_driver);
|
|
|
|
MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
|
|
MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:navpoint");
|