kernel_optimize_test/include/asm-mips
Pete Popov 10f6567e63 Removed __ilog2 since it's no longer needed and conflicts with the
generic one.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:49 +01:00
..
arc
cobalt Resurrect Cobalt support for 2.6. 2005-10-29 19:30:42 +01:00
ddb5xxx
dec Use physical addresses at the interface level, letting drivers remap 2005-10-29 19:31:35 +01:00
galileo-boards
gcc
ip32
it8172
jmr3927 Use new txx9 serial driver. 2005-10-29 19:30:52 +01:00
lasat
mach-atlas
mach-au1x00 Removed __ilog2 since it's no longer needed and conflicts with the 2005-10-29 19:31:49 +01:00
mach-db1x00 Base Au1200 2.6 support. 2005-10-29 19:30:47 +01:00
mach-ddb5074
mach-dec Use physical addresses at the interface level, letting drivers remap 2005-10-29 19:31:35 +01:00
mach-ev64120
mach-ev96100
mach-generic Inline ioremap() calls for constant addresses that map to KSEG1. 2005-10-29 19:31:34 +01:00
mach-ip22 Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
mach-ip27 Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
mach-ip32 Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
mach-ja Redo RM9000 workaround which along with other DSP ASE changes was 2005-10-29 19:31:23 +01:00
mach-jazz
mach-jmr3927/asm
mach-lasat
mach-mips Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1. 2005-10-29 19:31:37 +01:00
mach-ocelot
mach-ocelot3 Redo RM9000 workaround which along with other DSP ASE changes was 2005-10-29 19:31:23 +01:00
mach-pb1x00 Base Au1200 2.6 support. 2005-10-29 19:30:47 +01:00
mach-qemu
mach-rm200 Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
mach-sibyte Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
mach-yosemite Redo RM9000 workaround which along with other DSP ASE changes was 2005-10-29 19:31:23 +01:00
mips-boards Fixes for system controllers for Atlas/Malta core cards. 2005-10-29 19:30:20 +01:00
pci
sgi
sibyte Sparseify MIPS. 2005-10-29 19:30:50 +01:00
sn
tx4927
vr41xx
xtalk
8253pit.h
a.out.h
abi.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
addrspace.h Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1. 2005-10-29 19:31:37 +01:00
asm.h Fix build with CONFIG_PRINTK disabled. 2005-10-29 19:31:18 +01:00
asmmacro-32.h
asmmacro-64.h
asmmacro.h
atomic.h Always use ".set mips3" rather than select between "mips2" or "mips3" 2005-10-29 19:31:31 +01:00
auxvec.h
bcache.h
bitops.h Use clz / dclz on MIPS32 / MIPS64 processors. 2005-10-29 19:31:43 +01:00
bootinfo.h IP30 Identification. 2005-10-29 19:31:39 +01:00
branch.h
break.h Allocate break code 513 to KDB. 2005-10-29 19:30:34 +01:00
bug.h Fix build for CONFIG_BUG=n. Yes, bugs are now a compile time option ;-) 2005-10-29 19:31:17 +01:00
bugs.h Build fix for certain configurations. 2005-10-29 19:31:05 +01:00
byteorder.h
cache.h
cachectl.h
cacheflush.h Better interface to run uncached cache setup code. 2005-10-29 19:31:11 +01:00
cacheops.h
checksum.h Protect noat assembly with .set push/pop and make it somewhat readable. 2005-10-29 19:31:40 +01:00
compat.h
compiler.h
cpu-features.h Redo RM9000 workaround which along with other DSP ASE changes was 2005-10-29 19:31:23 +01:00
cpu-info.h Cleanup decoding of MIPSxx config registers. 2005-10-29 19:31:12 +01:00
cpu.h Detect the 34K. 2005-10-29 19:31:45 +01:00
cputime.h
current.h
ddb5074.h
debug.h
delay.h Need to include smp.h for the definition of smp_processor_id(). 2005-10-29 19:31:08 +01:00
div64.h
dma-mapping.h [PATCH] gfp_t: dma-mapping (mips) 2005-10-28 08:16:48 -07:00
dma.h
ds1286.h
dsp.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
elf.h Add EF_MIPS_ARCH_32R2 and EF_MIPS_ARCH_64R2 for tagging of R2 binaries. 2005-10-29 19:31:47 +01:00
emergency-restart.h
errno.h
fcntl.h
fixmap.h Delete duplicate copy of fixrange_init. 2005-10-29 19:30:28 +01:00
floppy.h
fpregdef.h
fpu_emulator.h Now that a struct is the only member left in struct 2005-10-29 19:31:14 +01:00
fpu.h __compute_return_epc() uses CFC1 instruction which might result in a 2005-10-29 19:31:13 +01:00
futex.h
gdb-stub.h
gfx.h
gt64120.h
gt64240.h
hardirq.h
hazards.h MIPS R2 instruction hazard handling. 2005-10-29 19:31:46 +01:00
highmem.h Define kmap_atomic_pfn() for MIPS. 2005-10-29 19:31:42 +01:00
hw_irq.h
i8259.h
ide.h
inst.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
interrupt.h Use ei / di MIPS32 R2 instructions if available. 2005-10-29 19:31:44 +01:00
inventory.h Reformatting, remove debugging code. 2005-10-29 19:30:57 +01:00
io.h Inline ioremap() calls for constant addresses that map to KSEG1. 2005-10-29 19:31:34 +01:00
ioctl.h
ioctls.h
ipc.h
ipcbuf.h
irq_cpu.h
irq.h Sparseify MIPS. 2005-10-29 19:30:50 +01:00
isadep.h
it8712.h
jazz.h
jazzdma.h
kmap_types.h
linkage.h
local.h
m48t35.h
m48t37.h
marvell.h
mc146818-time.h
mc146818rtc.h
mipsprom.h
mipsregs.h A few more macros to access MIPS R2 architecture registers. 2005-10-29 19:31:49 +01:00
mman.h
mmu_context.h Fix 64bit SMP TLB handler and stack frame handling, optimize 32bit SMP 2005-10-29 19:31:00 +01:00
mmu.h
mmzone.h
module.h Improved modules loader, more robust and works on 64bit kernels. 2005-10-29 19:30:39 +01:00
msc01_ic.h
msgbuf.h
namei.h
nile4.h
numnodes.h
paccess.h Gcc 4.0 fixes. 2005-10-29 19:30:53 +01:00
page.h Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1. 2005-10-29 19:31:37 +01:00
param.h
parport.h
pci.h
percpu.h
pgalloc.h Update MIPS to use the 4-level pagetable code thereby getting rid of 2005-10-29 19:30:31 +01:00
pgtable-32.h Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1. 2005-10-29 19:31:37 +01:00
pgtable-64.h Fix 64bit SMP TLB handler and stack frame handling, optimize 32bit SMP 2005-10-29 19:31:00 +01:00
pgtable-bits.h Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1. 2005-10-29 19:31:37 +01:00
pgtable.h Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1. 2005-10-29 19:31:37 +01:00
pmon.h
poll.h
posix_types.h
prctl.h
prefetch.h
processor.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
ptrace.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
qemu.h
r4kcache.h
reboot.h
reg.h
regdef.h
resource.h
riscos-syscall.h
rtc.h
scatterlist.h
sections.h
segment.h
semaphore.h
sembuf.h
serial.h Use new txx9 serial driver. 2005-10-29 19:30:52 +01:00
setup.h
sgialib.h
sgiarcs.h
sgidefs.h
shmbuf.h
shmparam.h
sigcontext.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
siginfo.h On MIPS the struct sigev preamble is only 8 bytes. 2005-10-29 19:31:15 +01:00
signal.h Support the MIPS32 / MIPS64 DSP ASE. 2005-10-29 19:31:17 +01:00
sim.h
smp.h
sni.h
socket.h
sockios.h
spinlock_types.h
spinlock.h Move sync into the delay slot here also. 2005-10-29 19:31:08 +01:00
stackframe.h Fix get_saved_sp for 64bit address space. Simplify set_save_sp. 2005-10-29 19:31:39 +01:00
stat.h
statfs.h
string.h
suspend.h
sysmips.h
system.h More .set to keep 32-bit processors happy. 2005-10-29 19:31:33 +01:00
termbits.h
termios.h
thread_info.h NPTL, round one. 2005-10-29 19:31:06 +01:00
time.h
timex.h
titan_dep.h
tlb.h
tlbdebug.h
tlbflush.h
topology.h
traps.h
tx3912.h
types.h
uaccess.h Sparseify MIPS. 2005-10-29 19:30:50 +01:00
ucontext.h
unaligned.h
unistd.h Add inotify syscalls for MIPS. 2005-10-29 19:31:47 +01:00
user.h
vga.h Fix endianess bugs. 2005-10-29 19:31:41 +01:00
war.h Redo RM9000 workaround which along with other DSP ASE changes was 2005-10-29 19:31:23 +01:00
watch.h
wbflush.h
xor.h
xxs1500.h