AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
11d1a62c59
kernel_optimize_test/drivers/net/wan/pci200syn.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h 
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

496 lines
13 KiB
C
Raw Blame History

/*
* Goramo PCI200SYN synchronous serial card driver for Linux
*
* Copyright (C) 2002-2003 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
*
* Sources of information:
* Hitachi HD64572 SCA-II User's Manual
* PLX Technology Inc. PCI9052 Data Book
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/io.h>
#include "hd64572.h"
static const char* version = "Goramo PCI200SYN driver version: 1.16";
static const char* devname = "PCI200SYN";
#undef DEBUG_PKT
#define DEBUG_RINGS
#define PCI200SYN_PLX_SIZE 0x80 /* PLX control window size (128b) */
#define PCI200SYN_SCA_SIZE 0x400 /* SCA window size (1Kb) */
#define ALL_PAGES_ALWAYS_MAPPED
#define NEED_DETECT_RAM
#define NEED_SCA_MSCI_INTR
#define MAX_TX_BUFFERS 10
static int pci_clock_freq = 33000000;
#define CLOCK_BASE pci_clock_freq
/*
* PLX PCI9052 local configuration and shared runtime registers.
* This structure can be used to access 9052 registers (memory mapped).
*/
typedef struct {
u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
u32 loc_rom_range; /* 10h : Local ROM Range */
u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
u32 loc_rom_base; /* 24h : Local ROM Base */
u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
}plx9052;
typedef struct port_s {
struct net_device *dev;
struct card_s *card;
spinlock_t lock; /* TX lock */
sync_serial_settings settings;
int rxpart; /* partial frame received, next frame invalid*/
unsigned short encoding;
unsigned short parity;
u16 rxin; /* rx ring buffer 'in' pointer */
u16 txin; /* tx ring buffer 'in' and 'last' pointers */
u16 txlast;
u8 rxs, txs, tmc; /* SCA registers */
u8 phy_node; /* physical port # - 0 or 1 */
}port_t;
typedef struct card_s {
u8 __iomem *rambase; /* buffer memory base (virtual) */
u8 __iomem *scabase; /* SCA memory base (virtual) */
plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */
u16 rx_ring_buffers; /* number of buffers in a ring */
u16 tx_ring_buffers;
u16 buff_offset; /* offset of first buffer of first channel */
u8 irq; /* interrupt request level */
port_t ports[2];
}card_t;
#define sca_in(reg, card) readb(card->scabase + (reg))
#define sca_out(value, reg, card) writeb(value, card->scabase + (reg))
#define sca_inw(reg, card) readw(card->scabase + (reg))
#define sca_outw(value, reg, card) writew(value, card->scabase + (reg))
#define sca_inl(reg, card) readl(card->scabase + (reg))
#define sca_outl(value, reg, card) writel(value, card->scabase + (reg))
#define port_to_card(port) (port->card)
#define log_node(port) (port->phy_node)
#define phy_node(port) (port->phy_node)
#define winbase(card) (card->rambase)
#define get_port(card, port) (&card->ports[port])
#define sca_flush(card) (sca_in(IER0, card));
static inline void new_memcpy_toio(char __iomem *dest, char *src, int length)
{
int len;
do {
len = length > 256 ? 256 : length;
memcpy_toio(dest, src, len);
dest += len;
src += len;
length -= len;
readb(dest);
} while (len);
}
#undef memcpy_toio
#define memcpy_toio new_memcpy_toio
#include "hd6457x.c"
static void pci200_set_iface(port_t *port)
{
card_t *card = port->card;
u16 msci = get_msci(port);
u8 rxs = port->rxs & CLK_BRG_MASK;
u8 txs = port->txs & CLK_BRG_MASK;
sca_out(EXS_TES1, (phy_node(port) ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
port_to_card(port));
switch(port->settings.clock_type) {
case CLOCK_INT:
rxs |= CLK_BRG; /* BRG output */
txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
break;
case CLOCK_TXINT:
rxs |= CLK_LINE; /* RXC input */
txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
break;
case CLOCK_TXFROMRX:
rxs |= CLK_LINE; /* RXC input */
txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
break;
default: /* EXTernal clock */
rxs |= CLK_LINE; /* RXC input */
txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
break;
}
port->rxs = rxs;
port->txs = txs;
sca_out(rxs, msci + RXS, card);
sca_out(txs, msci + TXS, card);
sca_set_port(port);
}
static int pci200_open(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
int result = hdlc_open(dev);
if (result)
return result;
sca_open(dev);
pci200_set_iface(port);
sca_flush(port_to_card(port));
return 0;
}
static int pci200_close(struct net_device *dev)
{
sca_close(dev);
sca_flush(port_to_card(dev_to_port(dev)));
hdlc_close(dev);
return 0;
}
static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
const size_t size = sizeof(sync_serial_settings);
sync_serial_settings new_line;
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
port_t *port = dev_to_port(dev);
#ifdef DEBUG_RINGS
if (cmd == SIOCDEVPRIVATE) {
sca_dump_rings(dev);
return 0;
}
#endif
if (cmd != SIOCWANDEV)
return hdlc_ioctl(dev, ifr, cmd);
switch(ifr->ifr_settings.type) {
case IF_GET_IFACE:
ifr->ifr_settings.type = IF_IFACE_V35;
if (ifr->ifr_settings.size < size) {
ifr->ifr_settings.size = size; /* data size wanted */
return -ENOBUFS;
}
if (copy_to_user(line, &port->settings, size))
return -EFAULT;
return 0;
case IF_IFACE_V35:
case IF_IFACE_SYNC_SERIAL:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user(&new_line, line, size))
return -EFAULT;
if (new_line.clock_type != CLOCK_EXT &&
new_line.clock_type != CLOCK_TXFROMRX &&
new_line.clock_type != CLOCK_INT &&
new_line.clock_type != CLOCK_TXINT)
return -EINVAL; /* No such clock setting */
if (new_line.loopback != 0 && new_line.loopback != 1)
return -EINVAL;
memcpy(&port->settings, &new_line, size); /* Update settings */
pci200_set_iface(port);
sca_flush(port_to_card(port));
return 0;
default:
return hdlc_ioctl(dev, ifr, cmd);
}
}
static void pci200_pci_remove_one(struct pci_dev *pdev)
{
int i;
card_t *card = pci_get_drvdata(pdev);
for (i = 0; i < 2; i++)
if (card->ports[i].card) {
struct net_device *dev = port_to_dev(&card->ports[i]);
unregister_hdlc_device(dev);
}
if (card->irq)
free_irq(card->irq, card);
if (card->rambase)
iounmap(card->rambase);
if (card->scabase)
iounmap(card->scabase);
if (card->plxbase)
iounmap(card->plxbase);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
if (card->ports[0].dev)
free_netdev(card->ports[0].dev);
if (card->ports[1].dev)
free_netdev(card->ports[1].dev);
kfree(card);
}
static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
card_t *card;
u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
u32 ramphys; /* buffer memory base */
u32 scaphys; /* SCA memory base */
u32 plxphys; /* PLX registers memory base */
#ifndef MODULE
static int printed_version;
if (!printed_version++)
printk(KERN_INFO "%s\n", version);
#endif
i = pci_enable_device(pdev);
if (i)
return i;
i = pci_request_regions(pdev, "PCI200SYN");
if (i) {
pci_disable_device(pdev);
return i;
}
card = kmalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
printk(KERN_ERR "pci200syn: unable to allocate memory\n");
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
}
memset(card, 0, sizeof(card_t));
pci_set_drvdata(pdev, card);
card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
if (!card->ports[0].dev || !card->ports[1].dev) {
printk(KERN_ERR "pci200syn: unable to allocate memory\n");
pci200_pci_remove_one(pdev);
return -ENOMEM;
}
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
printk(KERN_ERR "pci200syn: invalid card EEPROM parameters\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);
scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
if (card->plxbase == NULL ||
card->scabase == NULL ||
card->rambase == NULL) {
printk(KERN_ERR "pci200syn: ioremap() failed\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
/* Reset PLX */
p = &card->plxbase->init_ctrl;
writel(readl(p) | 0x40000000, p);
readl(p); /* Flush the write - do not use sca_flush */
udelay(1);
writel(readl(p) & ~0x40000000, p);
readl(p); /* Flush the write - do not use sca_flush */
udelay(1);
ramsize = sca_detect_ram(card, card->rambase,
pci_resource_len(pdev, 3));
/* number of TX + RX buffers for one port - this is dual port card */
i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU));
card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
card->rx_ring_buffers = i - card->tx_ring_buffers;
card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
card->rx_ring_buffers);
printk(KERN_INFO "pci200syn: %u KB RAM at 0x%x, IRQ%u, using %u TX +"
" %u RX packets rings\n", ramsize / 1024, ramphys,
pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
if (pdev->subsystem_device == PCI_DEVICE_ID_PLX_9050) {
printk(KERN_ERR "Detected PCI200SYN card with old "
"configuration data.\n");
printk(KERN_ERR "See <http://www.kernel.org/pub/"
"linux/utils/net/hdlc/pci200syn/> for update.\n");
printk(KERN_ERR "The card will stop working with"
" future versions of Linux if not updated.\n");
}
if (card->tx_ring_buffers < 1) {
printk(KERN_ERR "pci200syn: RAM test failed\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
/* Enable interrupts on the PCI bridge */
p = &card->plxbase->intr_ctrl_stat;
writew(readw(p) | 0x0040, p);
/* Allocate IRQ */
if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
pdev->irq);
pci200_pci_remove_one(pdev);
return -EBUSY;
}
card->irq = pdev->irq;
sca_init(card, 0);
for (i = 0; i < 2; i++) {
port_t *port = &card->ports[i];
struct net_device *dev = port_to_dev(port);
hdlc_device *hdlc = dev_to_hdlc(dev);
port->phy_node = i;
spin_lock_init(&port->lock);
SET_MODULE_OWNER(dev);
dev->irq = card->irq;
dev->mem_start = ramphys;
dev->mem_end = ramphys + ramsize - 1;
dev->tx_queue_len = 50;
dev->do_ioctl = pci200_ioctl;
dev->open = pci200_open;
dev->stop = pci200_close;
hdlc->attach = sca_attach;
hdlc->xmit = sca_xmit;
port->settings.clock_type = CLOCK_EXT;
port->card = card;
if (register_hdlc_device(dev)) {
printk(KERN_ERR "pci200syn: unable to register hdlc "
"device\n");
port->card = NULL;
pci200_pci_remove_one(pdev);
return -ENOBUFS;
}
sca_init_sync_port(port); /* Set up SCA memory */
printk(KERN_INFO "%s: PCI200SYN node %d\n",
dev->name, port->phy_node);
}
sca_flush(card);
return 0;
}
static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
PCI_DEVICE_ID_PLX_9050, 0, 0, 0 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
{ 0, }
};
static struct pci_driver pci200_pci_driver = {
.name = "PCI200SYN",
.id_table = pci200_pci_tbl,
.probe = pci200_pci_init_one,
.remove = pci200_pci_remove_one,
};
static int __init pci200_init_module(void)
{
#ifdef MODULE
printk(KERN_INFO "%s\n", version);
#endif
if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
return -EINVAL;
}
return pci_register_driver(&pci200_pci_driver);
}
static void __exit pci200_cleanup_module(void)
{
pci_unregister_driver(&pci200_pci_driver);
}
MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(pci, pci200_pci_tbl);
module_param(pci_clock_freq, int, 0444);
MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
module_init(pci200_init_module);
module_exit(pci200_cleanup_module);
View Git Blame Copy Permalink