kernel_optimize_test/drivers/gpio/gpio-reg.c
Matti Vaittinen e42615ec23 gpio: Use new GPIO_LINE_DIRECTION
It's hard for occasional GPIO code reader/writer to know if values 0/1
equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT to help them out.

NOTE - for gpio-amd-fch and gpio-bd9571mwv:
This commit also changes the return value for direction get to equal 1
for direction INPUT. Prior this commit these drivers might have
returned some other positive value but 1 for INPUT.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-07 09:27:48 +01:00

184 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* gpio-reg: single register individually fixed-direction GPIOs
*
* Copyright (C) 2016 Russell King
*/
#include <linux/gpio/driver.h>
#include <linux/gpio/gpio-reg.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
struct gpio_reg {
struct gpio_chip gc;
spinlock_t lock;
u32 direction;
u32 out;
void __iomem *reg;
struct irq_domain *irqdomain;
const int *irqs;
};
#define to_gpio_reg(x) container_of(x, struct gpio_reg, gc)
static int gpio_reg_get_direction(struct gpio_chip *gc, unsigned offset)
{
struct gpio_reg *r = to_gpio_reg(gc);
return r->direction & BIT(offset) ? GPIO_LINE_DIRECTION_IN :
GPIO_LINE_DIRECTION_OUT;
}
static int gpio_reg_direction_output(struct gpio_chip *gc, unsigned offset,
int value)
{
struct gpio_reg *r = to_gpio_reg(gc);
if (r->direction & BIT(offset))
return -ENOTSUPP;
gc->set(gc, offset, value);
return 0;
}
static int gpio_reg_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct gpio_reg *r = to_gpio_reg(gc);
return r->direction & BIT(offset) ? 0 : -ENOTSUPP;
}
static void gpio_reg_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct gpio_reg *r = to_gpio_reg(gc);
unsigned long flags;
u32 val, mask = BIT(offset);
spin_lock_irqsave(&r->lock, flags);
val = r->out;
if (value)
val |= mask;
else
val &= ~mask;
r->out = val;
writel_relaxed(val, r->reg);
spin_unlock_irqrestore(&r->lock, flags);
}
static int gpio_reg_get(struct gpio_chip *gc, unsigned offset)
{
struct gpio_reg *r = to_gpio_reg(gc);
u32 val, mask = BIT(offset);
if (r->direction & mask) {
/*
* double-read the value, some registers latch after the
* first read.
*/
readl_relaxed(r->reg);
val = readl_relaxed(r->reg);
} else {
val = r->out;
}
return !!(val & mask);
}
static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
struct gpio_reg *r = to_gpio_reg(gc);
unsigned long flags;
spin_lock_irqsave(&r->lock, flags);
r->out = (r->out & ~*mask) | (*bits & *mask);
writel_relaxed(r->out, r->reg);
spin_unlock_irqrestore(&r->lock, flags);
}
static int gpio_reg_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct gpio_reg *r = to_gpio_reg(gc);
int irq = r->irqs[offset];
if (irq >= 0 && r->irqdomain)
irq = irq_find_mapping(r->irqdomain, irq);
return irq;
}
/**
* gpio_reg_init - add a fixed in/out register as gpio
* @dev: optional struct device associated with this register
* @base: start gpio number, or -1 to allocate
* @num: number of GPIOs, maximum 32
* @label: GPIO chip label
* @direction: bitmask of fixed direction, one per GPIO signal, 1 = in
* @def_out: initial GPIO output value
* @names: array of %num strings describing each GPIO signal or %NULL
* @irqdom: irq domain or %NULL
* @irqs: array of %num ints describing the interrupt mapping for each
* GPIO signal, or %NULL. If @irqdom is %NULL, then this
* describes the Linux interrupt number, otherwise it describes
* the hardware interrupt number in the specified irq domain.
*
* Add a single-register GPIO device containing up to 32 GPIO signals,
* where each GPIO has a fixed input or output configuration. Only
* input GPIOs are assumed to be readable from the register, and only
* then after a double-read. Output values are assumed not to be
* readable.
*/
struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg,
int base, int num, const char *label, u32 direction, u32 def_out,
const char *const *names, struct irq_domain *irqdom, const int *irqs)
{
struct gpio_reg *r;
int ret;
if (dev)
r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
else
r = kzalloc(sizeof(*r), GFP_KERNEL);
if (!r)
return ERR_PTR(-ENOMEM);
spin_lock_init(&r->lock);
r->gc.label = label;
r->gc.get_direction = gpio_reg_get_direction;
r->gc.direction_input = gpio_reg_direction_input;
r->gc.direction_output = gpio_reg_direction_output;
r->gc.set = gpio_reg_set;
r->gc.get = gpio_reg_get;
r->gc.set_multiple = gpio_reg_set_multiple;
if (irqs)
r->gc.to_irq = gpio_reg_to_irq;
r->gc.base = base;
r->gc.ngpio = num;
r->gc.names = names;
r->direction = direction;
r->out = def_out;
r->reg = reg;
r->irqs = irqs;
if (dev)
ret = devm_gpiochip_add_data(dev, &r->gc, r);
else
ret = gpiochip_add_data(&r->gc, r);
return ret ? ERR_PTR(ret) : &r->gc;
}
int gpio_reg_resume(struct gpio_chip *gc)
{
struct gpio_reg *r = to_gpio_reg(gc);
unsigned long flags;
spin_lock_irqsave(&r->lock, flags);
writel_relaxed(r->out, r->reg);
spin_unlock_irqrestore(&r->lock, flags);
return 0;
}