kernel_optimize_test/drivers/base/memory.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

576 lines
14 KiB
C

/*
* drivers/base/memory.c - basic Memory class support
*
* Written by Matt Tolentino <matthew.e.tolentino@intel.com>
* Dave Hansen <haveblue@us.ibm.com>
*
* This file provides the necessary infrastructure to represent
* a SPARSEMEM-memory-model system's physical memory in /sysfs.
* All arch-independent code that assumes MEMORY_HOTPLUG requires
* SPARSEMEM should be contained here, or in mm/memory_hotplug.c.
*/
#include <linux/sysdev.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/topology.h>
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/memory.h>
#include <linux/kobject.h>
#include <linux/memory_hotplug.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/stat.h>
#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
#define MEMORY_CLASS_NAME "memory"
static struct sysdev_class memory_sysdev_class = {
.name = MEMORY_CLASS_NAME,
};
static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj)
{
return MEMORY_CLASS_NAME;
}
static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uevent_env *env)
{
int retval = 0;
return retval;
}
static const struct kset_uevent_ops memory_uevent_ops = {
.name = memory_uevent_name,
.uevent = memory_uevent,
};
static BLOCKING_NOTIFIER_HEAD(memory_chain);
int register_memory_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&memory_chain, nb);
}
EXPORT_SYMBOL(register_memory_notifier);
void unregister_memory_notifier(struct notifier_block *nb)
{
blocking_notifier_chain_unregister(&memory_chain, nb);
}
EXPORT_SYMBOL(unregister_memory_notifier);
static ATOMIC_NOTIFIER_HEAD(memory_isolate_chain);
int register_memory_isolate_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_register(&memory_isolate_chain, nb);
}
EXPORT_SYMBOL(register_memory_isolate_notifier);
void unregister_memory_isolate_notifier(struct notifier_block *nb)
{
atomic_notifier_chain_unregister(&memory_isolate_chain, nb);
}
EXPORT_SYMBOL(unregister_memory_isolate_notifier);
/*
* register_memory - Setup a sysfs device for a memory block
*/
static
int register_memory(struct memory_block *memory, struct mem_section *section)
{
int error;
memory->sysdev.cls = &memory_sysdev_class;
memory->sysdev.id = __section_nr(section);
error = sysdev_register(&memory->sysdev);
return error;
}
static void
unregister_memory(struct memory_block *memory, struct mem_section *section)
{
BUG_ON(memory->sysdev.cls != &memory_sysdev_class);
BUG_ON(memory->sysdev.id != __section_nr(section));
/* drop the ref. we got in remove_memory_block() */
kobject_put(&memory->sysdev.kobj);
sysdev_unregister(&memory->sysdev);
}
/*
* use this as the physical section index that this memsection
* uses.
*/
static ssize_t show_mem_phys_index(struct sys_device *dev,
struct sysdev_attribute *attr, char *buf)
{
struct memory_block *mem =
container_of(dev, struct memory_block, sysdev);
return sprintf(buf, "%08lx\n", mem->phys_index);
}
/*
* Show whether the section of memory is likely to be hot-removable
*/
static ssize_t show_mem_removable(struct sys_device *dev,
struct sysdev_attribute *attr, char *buf)
{
unsigned long start_pfn;
int ret;
struct memory_block *mem =
container_of(dev, struct memory_block, sysdev);
start_pfn = section_nr_to_pfn(mem->phys_index);
ret = is_mem_section_removable(start_pfn, PAGES_PER_SECTION);
return sprintf(buf, "%d\n", ret);
}
/*
* online, offline, going offline, etc.
*/
static ssize_t show_mem_state(struct sys_device *dev,
struct sysdev_attribute *attr, char *buf)
{
struct memory_block *mem =
container_of(dev, struct memory_block, sysdev);
ssize_t len = 0;
/*
* We can probably put these states in a nice little array
* so that they're not open-coded
*/
switch (mem->state) {
case MEM_ONLINE:
len = sprintf(buf, "online\n");
break;
case MEM_OFFLINE:
len = sprintf(buf, "offline\n");
break;
case MEM_GOING_OFFLINE:
len = sprintf(buf, "going-offline\n");
break;
default:
len = sprintf(buf, "ERROR-UNKNOWN-%ld\n",
mem->state);
WARN_ON(1);
break;
}
return len;
}
int memory_notify(unsigned long val, void *v)
{
return blocking_notifier_call_chain(&memory_chain, val, v);
}
int memory_isolate_notify(unsigned long val, void *v)
{
return atomic_notifier_call_chain(&memory_isolate_chain, val, v);
}
/*
* MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
* OK to have direct references to sparsemem variables in here.
*/
static int
memory_block_action(struct memory_block *mem, unsigned long action)
{
int i;
unsigned long psection;
unsigned long start_pfn, start_paddr;
struct page *first_page;
int ret;
int old_state = mem->state;
psection = mem->phys_index;
first_page = pfn_to_page(psection << PFN_SECTION_SHIFT);
/*
* The probe routines leave the pages reserved, just
* as the bootmem code does. Make sure they're still
* that way.
*/
if (action == MEM_ONLINE) {
for (i = 0; i < PAGES_PER_SECTION; i++) {
if (PageReserved(first_page+i))
continue;
printk(KERN_WARNING "section number %ld page number %d "
"not reserved, was it already online? \n",
psection, i);
return -EBUSY;
}
}
switch (action) {
case MEM_ONLINE:
start_pfn = page_to_pfn(first_page);
ret = online_pages(start_pfn, PAGES_PER_SECTION);
break;
case MEM_OFFLINE:
mem->state = MEM_GOING_OFFLINE;
start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
ret = remove_memory(start_paddr,
PAGES_PER_SECTION << PAGE_SHIFT);
if (ret) {
mem->state = old_state;
break;
}
break;
default:
WARN(1, KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
__func__, mem, action, action);
ret = -EINVAL;
}
return ret;
}
static int memory_block_change_state(struct memory_block *mem,
unsigned long to_state, unsigned long from_state_req)
{
int ret = 0;
mutex_lock(&mem->state_mutex);
if (mem->state != from_state_req) {
ret = -EINVAL;
goto out;
}
ret = memory_block_action(mem, to_state);
if (!ret)
mem->state = to_state;
out:
mutex_unlock(&mem->state_mutex);
return ret;
}
static ssize_t
store_mem_state(struct sys_device *dev,
struct sysdev_attribute *attr, const char *buf, size_t count)
{
struct memory_block *mem;
unsigned int phys_section_nr;
int ret = -EINVAL;
mem = container_of(dev, struct memory_block, sysdev);
phys_section_nr = mem->phys_index;
if (!present_section_nr(phys_section_nr))
goto out;
if (!strncmp(buf, "online", min((int)count, 6)))
ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
else if(!strncmp(buf, "offline", min((int)count, 7)))
ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE);
out:
if (ret)
return ret;
return count;
}
/*
* phys_device is a bad name for this. What I really want
* is a way to differentiate between memory ranges that
* are part of physical devices that constitute
* a complete removable unit or fru.
* i.e. do these ranges belong to the same physical device,
* s.t. if I offline all of these sections I can then
* remove the physical device?
*/
static ssize_t show_phys_device(struct sys_device *dev,
struct sysdev_attribute *attr, char *buf)
{
struct memory_block *mem =
container_of(dev, struct memory_block, sysdev);
return sprintf(buf, "%d\n", mem->phys_device);
}
static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL);
static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state);
static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL);
static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL);
#define mem_create_simple_file(mem, attr_name) \
sysdev_create_file(&mem->sysdev, &attr_##attr_name)
#define mem_remove_simple_file(mem, attr_name) \
sysdev_remove_file(&mem->sysdev, &attr_##attr_name)
/*
* Block size attribute stuff
*/
static ssize_t
print_block_size(struct sysdev_class *class, struct sysdev_class_attribute *attr,
char *buf)
{
return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
}
static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
static int block_size_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
&attr_block_size_bytes.attr);
}
/*
* Some architectures will have custom drivers to do this, and
* will not need to do it from userspace. The fake hot-add code
* as well as ppc64 will do all of their discovery in userspace
* and will require this interface.
*/
#ifdef CONFIG_ARCH_MEMORY_PROBE
static ssize_t
memory_probe_store(struct class *class, struct class_attribute *attr,
const char *buf, size_t count)
{
u64 phys_addr;
int nid;
int ret;
phys_addr = simple_strtoull(buf, NULL, 0);
nid = memory_add_physaddr_to_nid(phys_addr);
ret = add_memory(nid, phys_addr, PAGES_PER_SECTION << PAGE_SHIFT);
if (ret)
count = ret;
return count;
}
static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
static int memory_probe_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
&class_attr_probe.attr);
}
#else
static inline int memory_probe_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_MEMORY_FAILURE
/*
* Support for offlining pages of memory
*/
/* Soft offline a page */
static ssize_t
store_soft_offline_page(struct class *class,
struct class_attribute *attr,
const char *buf, size_t count)
{
int ret;
u64 pfn;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (strict_strtoull(buf, 0, &pfn) < 0)
return -EINVAL;
pfn >>= PAGE_SHIFT;
if (!pfn_valid(pfn))
return -ENXIO;
ret = soft_offline_page(pfn_to_page(pfn), 0);
return ret == 0 ? count : ret;
}
/* Forcibly offline a page, including killing processes. */
static ssize_t
store_hard_offline_page(struct class *class,
struct class_attribute *attr,
const char *buf, size_t count)
{
int ret;
u64 pfn;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (strict_strtoull(buf, 0, &pfn) < 0)
return -EINVAL;
pfn >>= PAGE_SHIFT;
ret = __memory_failure(pfn, 0, 0);
return ret ? ret : count;
}
static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
static __init int memory_fail_init(void)
{
int err;
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
&class_attr_soft_offline_page.attr);
if (!err)
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
&class_attr_hard_offline_page.attr);
return err;
}
#else
static inline int memory_fail_init(void)
{
return 0;
}
#endif
/*
* Note that phys_device is optional. It is here to allow for
* differentiation between which *physical* devices each
* section belongs to...
*/
int __weak arch_get_memory_phys_device(unsigned long start_pfn)
{
return 0;
}
static int add_memory_block(int nid, struct mem_section *section,
unsigned long state, enum mem_add_context context)
{
struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL);
unsigned long start_pfn;
int ret = 0;
if (!mem)
return -ENOMEM;
mem->phys_index = __section_nr(section);
mem->state = state;
mutex_init(&mem->state_mutex);
start_pfn = section_nr_to_pfn(mem->phys_index);
mem->phys_device = arch_get_memory_phys_device(start_pfn);
ret = register_memory(mem, section);
if (!ret)
ret = mem_create_simple_file(mem, phys_index);
if (!ret)
ret = mem_create_simple_file(mem, state);
if (!ret)
ret = mem_create_simple_file(mem, phys_device);
if (!ret)
ret = mem_create_simple_file(mem, removable);
if (!ret) {
if (context == HOTPLUG)
ret = register_mem_sect_under_node(mem, nid);
}
return ret;
}
/*
* For now, we have a linear search to go find the appropriate
* memory_block corresponding to a particular phys_index. If
* this gets to be a real problem, we can always use a radix
* tree or something here.
*
* This could be made generic for all sysdev classes.
*/
struct memory_block *find_memory_block(struct mem_section *section)
{
struct kobject *kobj;
struct sys_device *sysdev;
struct memory_block *mem;
char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1];
/*
* This only works because we know that section == sysdev->id
* slightly redundant with sysdev_register()
*/
sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section));
kobj = kset_find_obj(&memory_sysdev_class.kset, name);
if (!kobj)
return NULL;
sysdev = container_of(kobj, struct sys_device, kobj);
mem = container_of(sysdev, struct memory_block, sysdev);
return mem;
}
int remove_memory_block(unsigned long node_id, struct mem_section *section,
int phys_device)
{
struct memory_block *mem;
mem = find_memory_block(section);
unregister_mem_sect_under_nodes(mem);
mem_remove_simple_file(mem, phys_index);
mem_remove_simple_file(mem, state);
mem_remove_simple_file(mem, phys_device);
mem_remove_simple_file(mem, removable);
unregister_memory(mem, section);
return 0;
}
/*
* need an interface for the VM to add new memory regions,
* but without onlining it.
*/
int register_new_memory(int nid, struct mem_section *section)
{
return add_memory_block(nid, section, MEM_OFFLINE, HOTPLUG);
}
int unregister_memory_section(struct mem_section *section)
{
if (!present_section(section))
return -EINVAL;
return remove_memory_block(0, section, 0);
}
/*
* Initialize the sysfs support for memory devices...
*/
int __init memory_dev_init(void)
{
unsigned int i;
int ret;
int err;
memory_sysdev_class.kset.uevent_ops = &memory_uevent_ops;
ret = sysdev_class_register(&memory_sysdev_class);
if (ret)
goto out;
/*
* Create entries for memory sections that were found
* during boot and have been initialized
*/
for (i = 0; i < NR_MEM_SECTIONS; i++) {
if (!present_section_nr(i))
continue;
err = add_memory_block(0, __nr_to_section(i), MEM_ONLINE,
BOOT);
if (!ret)
ret = err;
}
err = memory_probe_init();
if (!ret)
ret = err;
err = memory_fail_init();
if (!ret)
ret = err;
err = block_size_init();
if (!ret)
ret = err;
out:
if (ret)
printk(KERN_ERR "%s() failed: %d\n", __func__, ret);
return ret;
}