forked from luck/tmp_suning_uos_patched
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
417 lines
11 KiB
C
417 lines
11 KiB
C
/*
|
|
* drivers/mtd/tx4925ndfmc.c
|
|
*
|
|
* Overview:
|
|
* This is a device driver for the NAND flash device found on the
|
|
* Toshiba RBTX4925 reference board, which is a SmartMediaCard. It supports
|
|
* 16MiB, 32MiB and 64MiB cards.
|
|
*
|
|
* Author: MontaVista Software, Inc. source@mvista.com
|
|
*
|
|
* Derived from drivers/mtd/autcpu12.c
|
|
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
|
|
*
|
|
* $Id: tx4925ndfmc.c,v 1.5 2004/10/05 13:50:20 gleixner Exp $
|
|
*
|
|
* Copyright (C) 2001 Toshiba Corporation
|
|
*
|
|
* 2003 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/tx4925/tx4925_nand.h>
|
|
|
|
extern struct nand_oobinfo jffs2_oobinfo;
|
|
|
|
/*
|
|
* MTD structure for RBTX4925 board
|
|
*/
|
|
static struct mtd_info *tx4925ndfmc_mtd = NULL;
|
|
|
|
/*
|
|
* Define partitions for flash devices
|
|
*/
|
|
|
|
static struct mtd_partition partition_info16k[] = {
|
|
{ .name = "RBTX4925 flash partition 1",
|
|
.offset = 0,
|
|
.size = 8 * 0x00100000 },
|
|
{ .name = "RBTX4925 flash partition 2",
|
|
.offset = 8 * 0x00100000,
|
|
.size = 8 * 0x00100000 },
|
|
};
|
|
|
|
static struct mtd_partition partition_info32k[] = {
|
|
{ .name = "RBTX4925 flash partition 1",
|
|
.offset = 0,
|
|
.size = 8 * 0x00100000 },
|
|
{ .name = "RBTX4925 flash partition 2",
|
|
.offset = 8 * 0x00100000,
|
|
.size = 24 * 0x00100000 },
|
|
};
|
|
|
|
static struct mtd_partition partition_info64k[] = {
|
|
{ .name = "User FS",
|
|
.offset = 0,
|
|
.size = 16 * 0x00100000 },
|
|
{ .name = "RBTX4925 flash partition 2",
|
|
.offset = 16 * 0x00100000,
|
|
.size = 48 * 0x00100000},
|
|
};
|
|
|
|
static struct mtd_partition partition_info128k[] = {
|
|
{ .name = "Skip bad section",
|
|
.offset = 0,
|
|
.size = 16 * 0x00100000 },
|
|
{ .name = "User FS",
|
|
.offset = 16 * 0x00100000,
|
|
.size = 112 * 0x00100000 },
|
|
};
|
|
#define NUM_PARTITIONS16K 2
|
|
#define NUM_PARTITIONS32K 2
|
|
#define NUM_PARTITIONS64K 2
|
|
#define NUM_PARTITIONS128K 2
|
|
|
|
/*
|
|
* hardware specific access to control-lines
|
|
*/
|
|
static void tx4925ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
|
|
{
|
|
|
|
switch(cmd){
|
|
|
|
case NAND_CTL_SETCLE:
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CLE;
|
|
break;
|
|
case NAND_CTL_CLRCLE:
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CLE;
|
|
break;
|
|
case NAND_CTL_SETALE:
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ALE;
|
|
break;
|
|
case NAND_CTL_CLRALE:
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ALE;
|
|
break;
|
|
case NAND_CTL_SETNCE:
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CE;
|
|
break;
|
|
case NAND_CTL_CLRNCE:
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CE;
|
|
break;
|
|
case NAND_CTL_SETWP:
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_WE;
|
|
break;
|
|
case NAND_CTL_CLRWP:
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_WE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* read device ready pin
|
|
*/
|
|
static int tx4925ndfmc_device_ready(struct mtd_info *mtd)
|
|
{
|
|
int ready;
|
|
ready = (tx4925_ndfmcptr->sr & TX4925_NDSFR_BUSY) ? 0 : 1;
|
|
return ready;
|
|
}
|
|
void tx4925ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
|
|
{
|
|
/* reset first */
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_MASK;
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_ENAB;
|
|
}
|
|
static void tx4925ndfmc_disable_ecc(void)
|
|
{
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
|
|
}
|
|
static void tx4925ndfmc_enable_read_ecc(void)
|
|
{
|
|
tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
|
|
tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_READ;
|
|
}
|
|
void tx4925ndfmc_readecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code){
|
|
int i;
|
|
u_char *ecc = ecc_code;
|
|
tx4925ndfmc_enable_read_ecc();
|
|
for (i = 0;i < 6;i++,ecc++)
|
|
*ecc = tx4925_read_nfmc(&(tx4925_ndfmcptr->dtr));
|
|
tx4925ndfmc_disable_ecc();
|
|
}
|
|
void tx4925ndfmc_device_setup(void)
|
|
{
|
|
|
|
*(unsigned char *)0xbb005000 &= ~0x08;
|
|
|
|
/* reset NDFMC */
|
|
tx4925_ndfmcptr->rstr |= TX4925_NDFRSTR_RST;
|
|
while (tx4925_ndfmcptr->rstr & TX4925_NDFRSTR_RST);
|
|
|
|
/* setup BusSeparete, Hold Time, Strobe Pulse Width */
|
|
tx4925_ndfmcptr->mcr = TX4925_BSPRT ? TX4925_NDFMCR_BSPRT : 0;
|
|
tx4925_ndfmcptr->spr = TX4925_HOLD << 4 | TX4925_SPW;
|
|
}
|
|
static u_char tx4925ndfmc_nand_read_byte(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
return tx4925_read_nfmc(this->IO_ADDR_R);
|
|
}
|
|
|
|
static void tx4925ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
tx4925_write_nfmc(byte, this->IO_ADDR_W);
|
|
}
|
|
|
|
static void tx4925ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i=0; i<len; i++)
|
|
tx4925_write_nfmc(buf[i], this->IO_ADDR_W);
|
|
}
|
|
|
|
static void tx4925ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i=0; i<len; i++)
|
|
buf[i] = tx4925_read_nfmc(this->IO_ADDR_R);
|
|
}
|
|
|
|
static int tx4925ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i=0; i<len; i++)
|
|
if (buf[i] != tx4925_read_nfmc(this->IO_ADDR_R))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Send command to NAND device
|
|
*/
|
|
static void tx4925ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
|
|
{
|
|
register struct nand_chip *this = mtd->priv;
|
|
|
|
/* Begin command latch cycle */
|
|
this->hwcontrol(mtd, NAND_CTL_SETCLE);
|
|
/*
|
|
* Write out the command to the device.
|
|
*/
|
|
if (command == NAND_CMD_SEQIN) {
|
|
int readcmd;
|
|
|
|
if (column >= mtd->oobblock) {
|
|
/* OOB area */
|
|
column -= mtd->oobblock;
|
|
readcmd = NAND_CMD_READOOB;
|
|
} else if (column < 256) {
|
|
/* First 256 bytes --> READ0 */
|
|
readcmd = NAND_CMD_READ0;
|
|
} else {
|
|
column -= 256;
|
|
readcmd = NAND_CMD_READ1;
|
|
}
|
|
this->write_byte(mtd, readcmd);
|
|
}
|
|
this->write_byte(mtd, command);
|
|
|
|
/* Set ALE and clear CLE to start address cycle */
|
|
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
|
|
|
|
if (column != -1 || page_addr != -1) {
|
|
this->hwcontrol(mtd, NAND_CTL_SETALE);
|
|
|
|
/* Serially input address */
|
|
if (column != -1)
|
|
this->write_byte(mtd, column);
|
|
if (page_addr != -1) {
|
|
this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
|
|
this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
|
|
/* One more address cycle for higher density devices */
|
|
if (mtd->size & 0x0c000000)
|
|
this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
|
|
}
|
|
/* Latch in address */
|
|
this->hwcontrol(mtd, NAND_CTL_CLRALE);
|
|
}
|
|
|
|
/*
|
|
* program and erase have their own busy handlers
|
|
* status and sequential in needs no delay
|
|
*/
|
|
switch (command) {
|
|
|
|
case NAND_CMD_PAGEPROG:
|
|
/* Turn off WE */
|
|
this->hwcontrol (mtd, NAND_CTL_CLRWP);
|
|
return;
|
|
|
|
case NAND_CMD_SEQIN:
|
|
/* Turn on WE */
|
|
this->hwcontrol (mtd, NAND_CTL_SETWP);
|
|
return;
|
|
|
|
case NAND_CMD_ERASE1:
|
|
case NAND_CMD_ERASE2:
|
|
case NAND_CMD_STATUS:
|
|
return;
|
|
|
|
case NAND_CMD_RESET:
|
|
if (this->dev_ready)
|
|
break;
|
|
this->hwcontrol(mtd, NAND_CTL_SETCLE);
|
|
this->write_byte(mtd, NAND_CMD_STATUS);
|
|
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
|
|
while ( !(this->read_byte(mtd) & 0x40));
|
|
return;
|
|
|
|
/* This applies to read commands */
|
|
default:
|
|
/*
|
|
* If we don't have access to the busy pin, we apply the given
|
|
* command delay
|
|
*/
|
|
if (!this->dev_ready) {
|
|
udelay (this->chip_delay);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* wait until command is processed */
|
|
while (!this->dev_ready(mtd));
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partitio
|
|
n **pparts, char *);
|
|
#endif
|
|
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
|
|
int __init tx4925ndfmc_init (void)
|
|
{
|
|
struct nand_chip *this;
|
|
int err = 0;
|
|
|
|
/* Allocate memory for MTD device structure and private data */
|
|
tx4925ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
|
|
GFP_KERNEL);
|
|
if (!tx4925ndfmc_mtd) {
|
|
printk ("Unable to allocate RBTX4925 NAND MTD device structure.\n");
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
tx4925ndfmc_device_setup();
|
|
|
|
/* io is indirect via a register so don't need to ioremap address */
|
|
|
|
/* Get pointer to private data */
|
|
this = (struct nand_chip *) (&tx4925ndfmc_mtd[1]);
|
|
|
|
/* Initialize structures */
|
|
memset((char *) tx4925ndfmc_mtd, 0, sizeof(struct mtd_info));
|
|
memset((char *) this, 0, sizeof(struct nand_chip));
|
|
|
|
/* Link the private data with the MTD structure */
|
|
tx4925ndfmc_mtd->priv = this;
|
|
|
|
/* Set address of NAND IO lines */
|
|
this->IO_ADDR_R = (void __iomem *)&(tx4925_ndfmcptr->dtr);
|
|
this->IO_ADDR_W = (void __iomem *)&(tx4925_ndfmcptr->dtr);
|
|
this->hwcontrol = tx4925ndfmc_hwcontrol;
|
|
this->enable_hwecc = tx4925ndfmc_enable_hwecc;
|
|
this->calculate_ecc = tx4925ndfmc_readecc;
|
|
this->correct_data = nand_correct_data;
|
|
this->eccmode = NAND_ECC_HW6_512;
|
|
this->dev_ready = tx4925ndfmc_device_ready;
|
|
/* 20 us command delay time */
|
|
this->chip_delay = 20;
|
|
this->read_byte = tx4925ndfmc_nand_read_byte;
|
|
this->write_byte = tx4925ndfmc_nand_write_byte;
|
|
this->cmdfunc = tx4925ndfmc_nand_command;
|
|
this->write_buf = tx4925ndfmc_nand_write_buf;
|
|
this->read_buf = tx4925ndfmc_nand_read_buf;
|
|
this->verify_buf = tx4925ndfmc_nand_verify_buf;
|
|
|
|
/* Scan to find existance of the device */
|
|
if (nand_scan (tx4925ndfmc_mtd, 1)) {
|
|
err = -ENXIO;
|
|
goto out_ior;
|
|
}
|
|
|
|
/* Register the partitions */
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
{
|
|
int mtd_parts_nb = 0;
|
|
struct mtd_partition *mtd_parts = 0;
|
|
mtd_parts_nb = parse_cmdline_partitions(tx4925ndfmc_mtd, &mtd_parts, "tx4925ndfmc");
|
|
if (mtd_parts_nb > 0)
|
|
add_mtd_partitions(tx4925ndfmc_mtd, mtd_parts, mtd_parts_nb);
|
|
else
|
|
add_mtd_device(tx4925ndfmc_mtd);
|
|
}
|
|
#else /* ifdef CONFIG_MTD_CMDLINE_PARTS */
|
|
switch(tx4925ndfmc_mtd->size){
|
|
case 0x01000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info16k, NUM_PARTITIONS16K); break;
|
|
case 0x02000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info32k, NUM_PARTITIONS32K); break;
|
|
case 0x04000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info64k, NUM_PARTITIONS64K); break;
|
|
case 0x08000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info128k, NUM_PARTITIONS128K); break;
|
|
default: {
|
|
printk ("Unsupported SmartMedia device\n");
|
|
err = -ENXIO;
|
|
goto out_ior;
|
|
}
|
|
}
|
|
#endif /* ifdef CONFIG_MTD_CMDLINE_PARTS */
|
|
goto out;
|
|
|
|
out_ior:
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
module_init(tx4925ndfmc_init);
|
|
|
|
/*
|
|
* Clean up routine
|
|
*/
|
|
#ifdef MODULE
|
|
static void __exit tx4925ndfmc_cleanup (void)
|
|
{
|
|
/* Release resources, unregister device */
|
|
nand_release (tx4925ndfmc_mtd);
|
|
|
|
/* Free the MTD device structure */
|
|
kfree (tx4925ndfmc_mtd);
|
|
}
|
|
module_exit(tx4925ndfmc_cleanup);
|
|
#endif
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
|
|
MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBTX4925");
|