kernel_optimize_test/arch/s390/kernel/signal.c
Gerald Schaefer c1821c2e97 [S390] noexec protection
This provides a noexec protection on s390 hardware. Our hardware does
not have any bits left in the pte for a hw noexec bit, so this is a
different approach using shadow page tables and a special addressing
mode that allows separate address spaces for code and data.

As a special feature of our "secondary-space" addressing mode, separate
page tables can be specified for the translation of data addresses
(storage operands) and instruction addresses. The shadow page table is
used for the instruction addresses and the standard page table for the
data addresses.
The shadow page table is linked to the standard page table by a pointer
in page->lru.next of the struct page corresponding to the page that
contains the standard page table (since page->private is not really
private with the pte_lock and the page table pages are not in the LRU
list).
Depending on the software bits of a pte, it is either inserted into
both page tables or just into the standard (data) page table. Pages of
a vma that does not have the VM_EXEC bit set get mapped only in the
data address space. Any try to execute code on such a page will cause a
page translation exception. The standard reaction to this is a SIGSEGV
with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn)
and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the
kernel to the signal stack frame. Unfortunately, the signal return
mechanism cannot be modified to use an SA_RESTORER because the
exception unwinding code depends on the system call opcode stored
behind the signal stack frame.

This feature requires that user space is executed in secondary-space
mode and the kernel in home-space mode, which means that the addressing
modes need to be switched and that the noexec protection only works
for user space.
After switching the addressing modes, we cannot use the mvcp/mvcs
instructions anymore to copy between kernel and user space. A new
mvcos instruction has been added to the z9 EC/BC hardware which allows
to copy between arbitrary address spaces, but on older hardware the
page tables need to be walked manually.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 21:18:17 +01:00

516 lines
14 KiB
C

/*
* arch/s390/kernel/signal.c
*
* Copyright (C) IBM Corp. 1999,2006
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
*
* Based on Intel version
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE];
struct sigcontext sc;
_sigregs sregs;
int signo;
__u8 retcode[S390_SYSCALL_SIZE];
} sigframe;
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE];
__u8 retcode[S390_SYSCALL_SIZE];
struct siginfo info;
struct ucontext uc;
} rt_sigframe;
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int
sys_sigsuspend(int history0, int history1, old_sigset_t mask)
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
return -ERESTARTNOHAND;
}
asmlinkage long
sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
if (act) {
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
}
return ret;
}
asmlinkage long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
{
return do_sigaltstack(uss, uoss, regs->gprs[15]);
}
/* Returns non-zero on fault. */
static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
_sigregs user_sregs;
save_access_regs(current->thread.acrs);
/* Copy a 'clean' PSW mask to the user to avoid leaking
information about whether PER is currently on. */
user_sregs.regs.psw.mask = PSW_MASK_MERGE(psw_user_bits, regs->psw.mask);
user_sregs.regs.psw.addr = regs->psw.addr;
memcpy(&user_sregs.regs.gprs, &regs->gprs, sizeof(sregs->regs.gprs));
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
sizeof(sregs->regs.acrs));
/*
* We have to store the fp registers to current->thread.fp_regs
* to merge them with the emulated registers.
*/
save_fp_regs(&current->thread.fp_regs);
memcpy(&user_sregs.fpregs, &current->thread.fp_regs,
sizeof(s390_fp_regs));
return __copy_to_user(sregs, &user_sregs, sizeof(_sigregs));
}
/* Returns positive number on error */
static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
int err;
_sigregs user_sregs;
/* Alwys make any pending restarted system call return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err = __copy_from_user(&user_sregs, sregs, sizeof(_sigregs));
if (err)
return err;
regs->psw.mask = PSW_MASK_MERGE(regs->psw.mask,
user_sregs.regs.psw.mask);
regs->psw.addr = PSW_ADDR_AMODE | user_sregs.regs.psw.addr;
memcpy(&regs->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs));
memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
sizeof(sregs->regs.acrs));
restore_access_regs(current->thread.acrs);
memcpy(&current->thread.fp_regs, &user_sregs.fpregs,
sizeof(s390_fp_regs));
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(&current->thread.fp_regs);
regs->trap = -1; /* disable syscall checks */
return 0;
}
asmlinkage long sys_sigreturn(struct pt_regs *regs)
{
sigframe __user *frame = (sigframe __user *)regs->gprs[15];
sigset_t set;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigregs(regs, &frame->sregs))
goto badframe;
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
{
rt_sigframe __user *frame = (rt_sigframe __user *)regs->gprs[15];
sigset_t set;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set.sig, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigregs(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL,
regs->gprs[15]) == -EFAULT)
goto badframe;
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/*
* Set up a signal frame.
*/
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
/* Default to using normal stack */
sp = regs->gprs[15];
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
}
/* This is the legacy signal stack switching. */
else if (!user_mode(regs) &&
!(ka->sa.sa_flags & SA_RESTORER) &&
ka->sa.sa_restorer) {
sp = (unsigned long) ka->sa.sa_restorer;
}
return (void __user *)((sp - frame_size) & -8ul);
}
static inline int map_signal(int sig)
{
if (current_thread_info()->exec_domain
&& current_thread_info()->exec_domain->signal_invmap
&& sig < 32)
return current_thread_info()->exec_domain->signal_invmap[sig];
else
return sig;
}
static int setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs * regs)
{
sigframe __user *frame;
frame = get_sigframe(ka, regs, sizeof(sigframe));
if (!access_ok(VERIFY_WRITE, frame, sizeof(sigframe)))
goto give_sigsegv;
if (__copy_to_user(&frame->sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE))
goto give_sigsegv;
if (save_sigregs(regs, &frame->sregs))
goto give_sigsegv;
if (__put_user(&frame->sregs, &frame->sc.sregs))
goto give_sigsegv;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->gprs[14] = (unsigned long)
ka->sa.sa_restorer | PSW_ADDR_AMODE;
} else {
regs->gprs[14] = (unsigned long)
frame->retcode | PSW_ADDR_AMODE;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn,
(u16 __user *)(frame->retcode)))
goto give_sigsegv;
}
/* Set up backchain. */
if (__put_user(regs->gprs[15], (addr_t __user *) frame))
goto give_sigsegv;
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (unsigned long) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
regs->gprs[4] = current->thread.trap_no;
regs->gprs[5] = current->thread.prot_addr;
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
goto give_sigsegv;
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
{
int err = 0;
rt_sigframe __user *frame;
frame = get_sigframe(ka, regs, sizeof(rt_sigframe));
if (!access_ok(VERIFY_WRITE, frame, sizeof(rt_sigframe)))
goto give_sigsegv;
if (copy_siginfo_to_user(&frame->info, info))
goto give_sigsegv;
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(NULL, &frame->uc.uc_link);
err |= __put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->gprs[15]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= save_sigregs(regs, &frame->uc.uc_mcontext);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->gprs[14] = (unsigned long)
ka->sa.sa_restorer | PSW_ADDR_AMODE;
} else {
regs->gprs[14] = (unsigned long)
frame->retcode | PSW_ADDR_AMODE;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
(u16 __user *)(frame->retcode)))
goto give_sigsegv;
}
/* Set up backchain. */
if (__put_user(regs->gprs[15], (addr_t __user *) frame))
goto give_sigsegv;
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (unsigned long) &frame->info;
regs->gprs[4] = (unsigned long) &frame->uc;
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
/*
* OK, we're invoking a handler
*/
static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
{
int ret;
/* Set up the stack frame */
if (ka->sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(sig, ka, info, oldset, regs);
else
ret = setup_frame(sig, ka, oldset, regs);
if (ret == 0) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
return ret;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
void do_signal(struct pt_regs *regs)
{
unsigned long retval = 0, continue_addr = 0, restart_addr = 0;
siginfo_t info;
int signr;
struct k_sigaction ka;
sigset_t *oldset;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
/* Are we from a system call? */
if (regs->trap == __LC_SVC_OLD_PSW) {
continue_addr = regs->psw.addr;
restart_addr = continue_addr - regs->ilc;
retval = regs->gprs[2];
/* Prepare for system call restart. We do this here so that a
debugger will see the already changed PSW. */
switch (retval) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->gprs[2] = regs->orig_gpr2;
regs->psw.addr = restart_addr;
break;
case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
regs->trap = -1; /* Don't deal with this again. */
}
/* Get signal to deliver. When running under ptrace, at this point
the debugger may change all our registers ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* Depending on the signal settings we may need to revert the
decision to restart the system call. */
if (signr > 0 && regs->psw.addr == restart_addr) {
if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(current->sighand->action[signr-1].sa.sa_flags
& SA_RESTART))) {
regs->gprs[2] = -EINTR;
regs->psw.addr = continue_addr;
}
}
if (signr > 0) {
/* Whee! Actually deliver the signal. */
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_31BIT)) {
extern int handle_signal32(unsigned long sig,
struct k_sigaction *ka,
siginfo_t *info,
sigset_t *oldset,
struct pt_regs *regs);
if (handle_signal32(
signr, &ka, &info, oldset, regs) == 0) {
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
#endif
if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
/*
* If there's no signal to deliver, we just put the saved sigmask back.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
/* Restart a different system call. */
if (retval == -ERESTART_RESTARTBLOCK
&& regs->psw.addr == continue_addr) {
regs->gprs[2] = __NR_restart_syscall;
set_thread_flag(TIF_RESTART_SVC);
}
}