forked from luck/tmp_suning_uos_patched
aab547ce0d
This adds the Gigabit Ethernet driver for the SSB Gigabit Ethernet core. This driver actually is a frontend to the Tigon3 driver. So the real work is done by tg3. This device is used in the Linksys WRT350N. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
175 lines
4.8 KiB
C
175 lines
4.8 KiB
C
#ifndef LINUX_SSB_DRIVER_GIGE_H_
|
|
#define LINUX_SSB_DRIVER_GIGE_H_
|
|
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
|
|
#ifdef CONFIG_SSB_DRIVER_GIGE
|
|
|
|
|
|
#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
|
|
#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
|
|
#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
|
|
#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
|
|
#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
|
|
#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
|
|
#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
|
|
#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
|
|
#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
|
|
|
|
/* TM Status High flags */
|
|
#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
|
|
/* TM Status Low flags */
|
|
#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
|
|
#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
|
|
#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
|
|
|
|
/* Boardflags (low) */
|
|
#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
|
|
|
|
|
|
#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
|
|
#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
|
|
|
|
struct ssb_gige {
|
|
struct ssb_device *dev;
|
|
|
|
spinlock_t lock;
|
|
|
|
/* True, if the device has an RGMII bus.
|
|
* False, if the device has a GMII bus. */
|
|
bool has_rgmii;
|
|
|
|
/* The PCI controller device. */
|
|
struct pci_controller pci_controller;
|
|
struct pci_ops pci_ops;
|
|
struct resource mem_resource;
|
|
struct resource io_resource;
|
|
};
|
|
|
|
/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
|
|
extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
|
|
|
|
/* Convert a pci_dev pointer to a ssb_gige pointer. */
|
|
static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
|
|
{
|
|
if (!pdev_is_ssb_gige_core(pdev))
|
|
return NULL;
|
|
return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
|
|
}
|
|
|
|
/* Returns whether the PHY is connected by an RGMII bus. */
|
|
static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
|
|
{
|
|
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
|
|
return (dev ? dev->has_rgmii : 0);
|
|
}
|
|
|
|
/* Returns whether we have a Roboswitch. */
|
|
static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
|
|
{
|
|
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
|
|
if (dev)
|
|
return !!(dev->dev->bus->sprom.boardflags_lo &
|
|
SSB_GIGE_BFL_ROBOSWITCH);
|
|
return 0;
|
|
}
|
|
|
|
/* Returns whether we can only do one DMA at once. */
|
|
static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
|
|
{
|
|
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
|
|
if (dev)
|
|
return ((dev->dev->bus->chip_id == 0x4785) &&
|
|
(dev->dev->bus->chip_rev < 2));
|
|
return 0;
|
|
}
|
|
|
|
/* Returns whether we must flush posted writes. */
|
|
static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
|
|
{
|
|
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
|
|
if (dev)
|
|
return (dev->dev->bus->chip_id == 0x4785);
|
|
return 0;
|
|
}
|
|
|
|
extern char * nvram_get(const char *name);
|
|
/* Get the device MAC address */
|
|
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
|
|
{
|
|
#ifdef CONFIG_BCM947XX
|
|
char *res = nvram_get("et0macaddr");
|
|
if (res)
|
|
memcpy(macaddr, res, 6);
|
|
#endif
|
|
}
|
|
|
|
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
|
|
struct pci_dev *pdev);
|
|
extern int ssb_gige_map_irq(struct ssb_device *sdev,
|
|
const struct pci_dev *pdev);
|
|
|
|
/* The GigE driver is not a standalone module, because we don't have support
|
|
* for unregistering the driver. So we could not unload the module anyway. */
|
|
extern int ssb_gige_init(void);
|
|
static inline void ssb_gige_exit(void)
|
|
{
|
|
/* Currently we can not unregister the GigE driver,
|
|
* because we can not unregister the PCI bridge. */
|
|
BUG();
|
|
}
|
|
|
|
|
|
#else /* CONFIG_SSB_DRIVER_GIGE */
|
|
/* Gigabit Ethernet driver disabled */
|
|
|
|
|
|
static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
|
|
struct pci_dev *pdev)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
static inline int ssb_gige_map_irq(struct ssb_device *sdev,
|
|
const struct pci_dev *pdev)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
static inline int ssb_gige_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void ssb_gige_exit(void)
|
|
{
|
|
}
|
|
|
|
static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
|
|
{
|
|
return NULL;
|
|
}
|
|
static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_SSB_DRIVER_GIGE */
|
|
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
|