forked from luck/tmp_suning_uos_patched
a130243b96
Current implementation of mop500_ab8500 allows for inconsistent sample rate and channel count configuration between the playback and recording interfaces, through in the hardware the two MSP controllers share common clock and frame sync signals. This patch adds the necessary code to ensure that the two device are configure consistently. The check is added at machine driver level, as how to lock DAI configuration depend of the actual hardware implementation. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
456 lines
12 KiB
C
456 lines
12 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2012
|
|
*
|
|
* Author: Ola Lilja <ola.o.lilja@stericsson.com>,
|
|
* Kristoffer Karlsson <kristoffer.karlsson@stericsson.com>
|
|
* for ST-Ericsson.
|
|
*
|
|
* License terms:
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
|
|
#include "ux500_pcm.h"
|
|
#include "ux500_msp_dai.h"
|
|
#include "mop500_ab8500.h"
|
|
#include "../codecs/ab8500-codec.h"
|
|
|
|
#define TX_SLOT_MONO 0x0008
|
|
#define TX_SLOT_STEREO 0x000a
|
|
#define RX_SLOT_MONO 0x0001
|
|
#define RX_SLOT_STEREO 0x0003
|
|
#define TX_SLOT_8CH 0x00FF
|
|
#define RX_SLOT_8CH 0x00FF
|
|
|
|
#define DEF_TX_SLOTS TX_SLOT_STEREO
|
|
#define DEF_RX_SLOTS RX_SLOT_MONO
|
|
|
|
#define DRIVERMODE_NORMAL 0
|
|
#define DRIVERMODE_CODEC_ONLY 1
|
|
|
|
/* Slot configuration */
|
|
static unsigned int tx_slots = DEF_TX_SLOTS;
|
|
static unsigned int rx_slots = DEF_RX_SLOTS;
|
|
|
|
/* Configuration consistency parameters */
|
|
static DEFINE_MUTEX(mop500_ab8500_params_lock);
|
|
static unsigned long mop500_ab8500_usage;
|
|
static int mop500_ab8500_rate;
|
|
static int mop500_ab8500_channels;
|
|
|
|
/* Clocks */
|
|
static const char * const enum_mclk[] = {
|
|
"SYSCLK",
|
|
"ULPCLK"
|
|
};
|
|
enum mclk {
|
|
MCLK_SYSCLK,
|
|
MCLK_ULPCLK,
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_EXT_DECL(soc_enum_mclk, enum_mclk);
|
|
|
|
/* Private data for machine-part MOP500<->AB8500 */
|
|
struct mop500_ab8500_drvdata {
|
|
/* Clocks */
|
|
enum mclk mclk_sel;
|
|
struct clk *clk_ptr_intclk;
|
|
struct clk *clk_ptr_sysclk;
|
|
struct clk *clk_ptr_ulpclk;
|
|
};
|
|
|
|
static inline const char *get_mclk_str(enum mclk mclk_sel)
|
|
{
|
|
switch (mclk_sel) {
|
|
case MCLK_SYSCLK:
|
|
return "SYSCLK";
|
|
case MCLK_ULPCLK:
|
|
return "ULPCLK";
|
|
default:
|
|
return "Unknown";
|
|
}
|
|
}
|
|
|
|
static int mop500_ab8500_set_mclk(struct device *dev,
|
|
struct mop500_ab8500_drvdata *drvdata)
|
|
{
|
|
int status;
|
|
struct clk *clk_ptr;
|
|
|
|
if (IS_ERR(drvdata->clk_ptr_intclk)) {
|
|
dev_err(dev,
|
|
"%s: ERROR: intclk not initialized!\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
switch (drvdata->mclk_sel) {
|
|
case MCLK_SYSCLK:
|
|
clk_ptr = drvdata->clk_ptr_sysclk;
|
|
break;
|
|
case MCLK_ULPCLK:
|
|
clk_ptr = drvdata->clk_ptr_ulpclk;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ERR(clk_ptr)) {
|
|
dev_err(dev, "%s: ERROR: %s not initialized!\n", __func__,
|
|
get_mclk_str(drvdata->mclk_sel));
|
|
return -EIO;
|
|
}
|
|
|
|
status = clk_set_parent(drvdata->clk_ptr_intclk, clk_ptr);
|
|
if (status)
|
|
dev_err(dev,
|
|
"%s: ERROR: Setting intclk parent to %s failed (ret = %d)!",
|
|
__func__, get_mclk_str(drvdata->mclk_sel), status);
|
|
else
|
|
dev_dbg(dev,
|
|
"%s: intclk parent changed to %s.\n",
|
|
__func__, get_mclk_str(drvdata->mclk_sel));
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Control-events
|
|
*/
|
|
|
|
static int mclk_input_control_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
|
|
struct mop500_ab8500_drvdata *drvdata =
|
|
snd_soc_card_get_drvdata(card);
|
|
|
|
ucontrol->value.enumerated.item[0] = drvdata->mclk_sel;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mclk_input_control_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
|
|
struct mop500_ab8500_drvdata *drvdata =
|
|
snd_soc_card_get_drvdata(card);
|
|
unsigned int val = ucontrol->value.enumerated.item[0];
|
|
|
|
if (val > (unsigned int)MCLK_ULPCLK)
|
|
return -EINVAL;
|
|
if (drvdata->mclk_sel == val)
|
|
return 0;
|
|
|
|
drvdata->mclk_sel = val;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Controls
|
|
*/
|
|
|
|
static struct snd_kcontrol_new mop500_ab8500_ctrls[] = {
|
|
SOC_ENUM_EXT("Master Clock Select",
|
|
soc_enum_mclk,
|
|
mclk_input_control_get, mclk_input_control_put),
|
|
SOC_DAPM_PIN_SWITCH("Headset Left"),
|
|
SOC_DAPM_PIN_SWITCH("Headset Right"),
|
|
SOC_DAPM_PIN_SWITCH("Earpiece"),
|
|
SOC_DAPM_PIN_SWITCH("Speaker Left"),
|
|
SOC_DAPM_PIN_SWITCH("Speaker Right"),
|
|
SOC_DAPM_PIN_SWITCH("LineOut Left"),
|
|
SOC_DAPM_PIN_SWITCH("LineOut Right"),
|
|
SOC_DAPM_PIN_SWITCH("Vibra 1"),
|
|
SOC_DAPM_PIN_SWITCH("Vibra 2"),
|
|
SOC_DAPM_PIN_SWITCH("Mic 1"),
|
|
SOC_DAPM_PIN_SWITCH("Mic 2"),
|
|
SOC_DAPM_PIN_SWITCH("LineIn Left"),
|
|
SOC_DAPM_PIN_SWITCH("LineIn Right"),
|
|
SOC_DAPM_PIN_SWITCH("DMic 1"),
|
|
SOC_DAPM_PIN_SWITCH("DMic 2"),
|
|
SOC_DAPM_PIN_SWITCH("DMic 3"),
|
|
SOC_DAPM_PIN_SWITCH("DMic 4"),
|
|
SOC_DAPM_PIN_SWITCH("DMic 5"),
|
|
SOC_DAPM_PIN_SWITCH("DMic 6"),
|
|
};
|
|
|
|
/* ASoC */
|
|
|
|
static int mop500_ab8500_startup(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
|
|
/* Set audio-clock source */
|
|
return mop500_ab8500_set_mclk(rtd->card->dev,
|
|
snd_soc_card_get_drvdata(rtd->card));
|
|
}
|
|
|
|
static void mop500_ab8500_shutdown(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct device *dev = rtd->card->dev;
|
|
|
|
dev_dbg(dev, "%s: Enter\n", __func__);
|
|
|
|
/* Reset slots configuration to default(s) */
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
tx_slots = DEF_TX_SLOTS;
|
|
else
|
|
rx_slots = DEF_RX_SLOTS;
|
|
}
|
|
|
|
static int mop500_ab8500_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *codec_dai = rtd->codec_dai;
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
|
struct device *dev = rtd->card->dev;
|
|
unsigned int fmt;
|
|
int channels, ret = 0, driver_mode, slots;
|
|
unsigned int sw_codec, sw_cpu;
|
|
bool is_playback;
|
|
|
|
dev_dbg(dev, "%s: Enter\n", __func__);
|
|
|
|
dev_dbg(dev, "%s: substream->pcm->name = %s\n"
|
|
"substream->pcm->id = %s.\n"
|
|
"substream->name = %s.\n"
|
|
"substream->number = %d.\n",
|
|
__func__,
|
|
substream->pcm->name,
|
|
substream->pcm->id,
|
|
substream->name,
|
|
substream->number);
|
|
|
|
/* Ensure configuration consistency between DAIs */
|
|
mutex_lock(&mop500_ab8500_params_lock);
|
|
if (mop500_ab8500_usage) {
|
|
if (mop500_ab8500_rate != params_rate(params) ||
|
|
mop500_ab8500_channels != params_channels(params)) {
|
|
mutex_unlock(&mop500_ab8500_params_lock);
|
|
return -EBUSY;
|
|
}
|
|
} else {
|
|
mop500_ab8500_rate = params_rate(params);
|
|
mop500_ab8500_channels = params_channels(params);
|
|
}
|
|
__set_bit(cpu_dai->id, &mop500_ab8500_usage);
|
|
mutex_unlock(&mop500_ab8500_params_lock);
|
|
|
|
channels = params_channels(params);
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
sw_cpu = 32;
|
|
break;
|
|
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
sw_cpu = 16;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Setup codec depending on driver-mode */
|
|
if (channels == 8)
|
|
driver_mode = DRIVERMODE_CODEC_ONLY;
|
|
else
|
|
driver_mode = DRIVERMODE_NORMAL;
|
|
dev_dbg(dev, "%s: Driver-mode: %s.\n", __func__,
|
|
(driver_mode == DRIVERMODE_NORMAL) ? "NORMAL" : "CODEC_ONLY");
|
|
|
|
/* Setup format */
|
|
|
|
if (driver_mode == DRIVERMODE_NORMAL) {
|
|
fmt = SND_SOC_DAIFMT_DSP_A |
|
|
SND_SOC_DAIFMT_CBM_CFM |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CONT;
|
|
} else {
|
|
fmt = SND_SOC_DAIFMT_DSP_A |
|
|
SND_SOC_DAIFMT_CBM_CFM |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_GATED;
|
|
}
|
|
|
|
ret = snd_soc_dai_set_fmt(codec_dai, fmt);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"%s: ERROR: snd_soc_dai_set_fmt failed for codec_dai (ret = %d)!\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"%s: ERROR: snd_soc_dai_set_fmt failed for cpu_dai (ret = %d)!\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Setup TDM-slots */
|
|
|
|
is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
|
|
switch (channels) {
|
|
case 1:
|
|
slots = 16;
|
|
tx_slots = (is_playback) ? TX_SLOT_MONO : 0;
|
|
rx_slots = (is_playback) ? 0 : RX_SLOT_MONO;
|
|
break;
|
|
case 2:
|
|
slots = 16;
|
|
tx_slots = (is_playback) ? TX_SLOT_STEREO : 0;
|
|
rx_slots = (is_playback) ? 0 : RX_SLOT_STEREO;
|
|
break;
|
|
case 8:
|
|
slots = 16;
|
|
tx_slots = (is_playback) ? TX_SLOT_8CH : 0;
|
|
rx_slots = (is_playback) ? 0 : RX_SLOT_8CH;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (driver_mode == DRIVERMODE_NORMAL)
|
|
sw_codec = sw_cpu;
|
|
else
|
|
sw_codec = 20;
|
|
|
|
dev_dbg(dev, "%s: CPU-DAI TDM: TX=0x%04X RX=0x%04x\n", __func__,
|
|
tx_slots, rx_slots);
|
|
ret = snd_soc_dai_set_tdm_slot(cpu_dai, tx_slots, rx_slots, slots,
|
|
sw_cpu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(dev, "%s: CODEC-DAI TDM: TX=0x%04X RX=0x%04x\n", __func__,
|
|
tx_slots, rx_slots);
|
|
ret = snd_soc_dai_set_tdm_slot(codec_dai, tx_slots, rx_slots, slots,
|
|
sw_codec);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mop500_ab8500_hw_free(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
|
|
|
mutex_lock(&mop500_ab8500_params_lock);
|
|
__clear_bit(cpu_dai->id, &mop500_ab8500_usage);
|
|
mutex_unlock(&mop500_ab8500_params_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct snd_soc_ops mop500_ab8500_ops[] = {
|
|
{
|
|
.hw_params = mop500_ab8500_hw_params,
|
|
.hw_free = mop500_ab8500_hw_free,
|
|
.startup = mop500_ab8500_startup,
|
|
.shutdown = mop500_ab8500_shutdown,
|
|
}
|
|
};
|
|
|
|
int mop500_ab8500_machine_init(struct snd_soc_pcm_runtime *rtd)
|
|
{
|
|
struct snd_soc_codec *codec = rtd->codec;
|
|
struct device *dev = rtd->card->dev;
|
|
struct mop500_ab8500_drvdata *drvdata;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s Enter.\n", __func__);
|
|
|
|
/* Create driver private-data struct */
|
|
drvdata = devm_kzalloc(dev, sizeof(struct mop500_ab8500_drvdata),
|
|
GFP_KERNEL);
|
|
snd_soc_card_set_drvdata(rtd->card, drvdata);
|
|
|
|
/* Setup clocks */
|
|
|
|
drvdata->clk_ptr_sysclk = clk_get(dev, "sysclk");
|
|
if (IS_ERR(drvdata->clk_ptr_sysclk))
|
|
dev_warn(dev, "%s: WARNING: clk_get failed for 'sysclk'!\n",
|
|
__func__);
|
|
drvdata->clk_ptr_ulpclk = clk_get(dev, "ulpclk");
|
|
if (IS_ERR(drvdata->clk_ptr_ulpclk))
|
|
dev_warn(dev, "%s: WARNING: clk_get failed for 'ulpclk'!\n",
|
|
__func__);
|
|
drvdata->clk_ptr_intclk = clk_get(dev, "intclk");
|
|
if (IS_ERR(drvdata->clk_ptr_intclk))
|
|
dev_warn(dev, "%s: WARNING: clk_get failed for 'intclk'!\n",
|
|
__func__);
|
|
|
|
/* Set intclk default parent to ulpclk */
|
|
drvdata->mclk_sel = MCLK_ULPCLK;
|
|
ret = mop500_ab8500_set_mclk(dev, drvdata);
|
|
if (ret < 0)
|
|
dev_warn(dev, "%s: WARNING: mop500_ab8500_set_mclk!\n",
|
|
__func__);
|
|
|
|
drvdata->mclk_sel = MCLK_ULPCLK;
|
|
|
|
/* Add controls */
|
|
ret = snd_soc_add_card_controls(codec->card, mop500_ab8500_ctrls,
|
|
ARRAY_SIZE(mop500_ab8500_ctrls));
|
|
if (ret < 0) {
|
|
pr_err("%s: Failed to add machine-controls (%d)!\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = snd_soc_dapm_disable_pin(&codec->dapm, "Earpiece");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "Speaker Left");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "Speaker Right");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "LineOut Left");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "LineOut Right");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "Vibra 1");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "Vibra 2");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "Mic 1");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "Mic 2");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "LineIn Left");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "LineIn Right");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "DMic 1");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "DMic 2");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "DMic 3");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "DMic 4");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "DMic 5");
|
|
ret |= snd_soc_dapm_disable_pin(&codec->dapm, "DMic 6");
|
|
|
|
return ret;
|
|
}
|
|
|
|
void mop500_ab8500_remove(struct snd_soc_card *card)
|
|
{
|
|
struct mop500_ab8500_drvdata *drvdata = snd_soc_card_get_drvdata(card);
|
|
|
|
if (drvdata->clk_ptr_sysclk != NULL)
|
|
clk_put(drvdata->clk_ptr_sysclk);
|
|
if (drvdata->clk_ptr_ulpclk != NULL)
|
|
clk_put(drvdata->clk_ptr_ulpclk);
|
|
if (drvdata->clk_ptr_intclk != NULL)
|
|
clk_put(drvdata->clk_ptr_intclk);
|
|
|
|
snd_soc_card_set_drvdata(card, drvdata);
|
|
}
|