kernel_optimize_test/drivers/pinctrl
Mika Westerberg c41eb2c7f9 pinctrl: sunrisepoint: Align GPIO number space with Windows
It turns out that the Windows GPIO driver for Sunrisepoint PCH-H uses
similar bank structure than it does for Cannon Lake with the exception
that here the bank size is always 24 pins. Starting from pad group E the
BIOS/Windows GPIO numbering does not match the hardware anymore but
instead there are gaps to make each pad group ("bank") consume exactly
24 pins. Because of this Linux does not use correct pins for
GpioIo/GpioIo resources exposed by the BIOS.

This patch aligns the GPIO number space with BIOS/Windows to make sure
the same numbering scheme is used in Linux as well following what we did
already for Intel Cannon Lake.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1543769
Reported-by: Vivien FRASCA <vivien.frasca@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-02 14:36:00 +02:00
..
aspeed
bcm
berlin
freescale pinctrl: imx: Add pinctrl driver support for imx6sll 2018-03-23 04:16:10 +01:00
intel pinctrl: sunrisepoint: Align GPIO number space with Windows 2018-05-02 14:36:00 +02:00
mediatek pinctrl: mtk: fix check warnings. 2018-03-26 10:58:33 +02:00
meson pinctrl: meson-axg: fix the range of aobus bank 2018-05-02 14:35:59 +02:00
mvebu
nomadik pinctrl: nomadik: Drop U8540/9540 support 2018-03-23 03:38:14 +01:00
pxa
qcom This is the bulk of GPIO changes for the v4.17 kernel cycle: 2018-04-05 09:51:41 -07:00
samsung pinctrl: samsung: Validate alias coming from DT 2018-03-08 13:02:26 +01:00
sh-pfc Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
sirf
spear
sprd
stm32 pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency 2018-03-23 04:04:40 +01:00
sunxi pinctrl: sunxi: add support for the Allwinner H6 main pin controller 2018-03-27 15:09:42 +02:00
tegra
ti
uniphier pinctrl: uniphier: add UART hardware flow control pin-mux settings 2018-03-27 15:14:43 +02:00
vt8500
zte
core.c pinctrl: core: Add missing EXPORT on pinctrl_register_mappings 2018-03-02 11:05:35 +01:00
core.h
devicetree.c pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs 2018-03-02 09:41:21 +01:00
devicetree.h
Kconfig Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
Makefile Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
pinconf-generic.c
pinconf.c
pinconf.h
pinctrl-amd.c pinctrl/amd: poll InterruptEnable bits in enable_irq 2018-03-26 11:09:49 +02:00
pinctrl-amd.h
pinctrl-artpec6.c pinctrl: artpec-6: Add smaller groups for uarts 2018-03-01 17:04:09 +01:00
pinctrl-as3722.c
pinctrl-at91-pio4.c
pinctrl-at91.c
pinctrl-at91.h
pinctrl-axp209.c
pinctrl-coh901.c
pinctrl-coh901.h
pinctrl-da850-pupd.c
pinctrl-digicolor.c
pinctrl-falcon.c
pinctrl-gemini.c
pinctrl-ingenic.c
pinctrl-lantiq.c
pinctrl-lantiq.h
pinctrl-lpc18xx.c
pinctrl-max77620.c
pinctrl-mcp23s08.c pinctrl: mcp23s08: add open drain configuration for irq output 2018-02-22 16:08:59 +01:00
pinctrl-ocelot.c pinctrl: ocelot: fix gpio direction 2018-03-26 11:04:48 +02:00
pinctrl-oxnas.c
pinctrl-palmas.c
pinctrl-pic32.c
pinctrl-pic32.h
pinctrl-pistachio.c
pinctrl-rk805.c
pinctrl-rockchip.c
pinctrl-rza1.c
pinctrl-single.c pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 2018-03-26 10:48:17 +02:00
pinctrl-st.c
pinctrl-sx150x.c
pinctrl-tb10x.c
pinctrl-u300.c
pinctrl-utils.c
pinctrl-utils.h
pinctrl-xway.c
pinctrl-zynq.c
pinmux.c
pinmux.h