forked from luck/tmp_suning_uos_patched
f3d1fca3eb
The current bcm43xx driver does not contain code to handle PCI-E interfaces such as the BCM4311 and BCM4312. This patch, originally written by Stefano Brivio adds the necessary code to enable these interfaces. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
394 lines
10 KiB
C
394 lines
10 KiB
C
/*
|
|
|
|
Broadcom BCM43xx wireless driver
|
|
|
|
Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
|
|
Stefano Brivio <st3@riseup.net>
|
|
Michael Buesch <mbuesch@freenet.de>
|
|
Danny van Dyk <kugelfang@gentoo.org>
|
|
Andreas Jaggi <andreas.jaggi@waterwave.ch>
|
|
|
|
Some parts of the code in this file are derived from the ipw2200
|
|
driver Copyright(c) 2003 - 2004 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; see the file COPYING. If not, write to
|
|
the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
|
|
Boston, MA 02110-1301, USA.
|
|
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include "bcm43xx.h"
|
|
#include "bcm43xx_power.h"
|
|
#include "bcm43xx_main.h"
|
|
|
|
|
|
/* Get the Slow Clock Source */
|
|
static int bcm43xx_pctl_get_slowclksrc(struct bcm43xx_private *bcm)
|
|
{
|
|
u32 tmp;
|
|
int err;
|
|
|
|
assert(bcm->current_core == &bcm->core_chipcommon);
|
|
if (bcm->current_core->rev < 6) {
|
|
if (bcm->bustype == BCM43xx_BUSTYPE_PCMCIA ||
|
|
bcm->bustype == BCM43xx_BUSTYPE_SB)
|
|
return BCM43xx_PCTL_CLKSRC_XTALOS;
|
|
if (bcm->bustype == BCM43xx_BUSTYPE_PCI) {
|
|
err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
|
|
assert(!err);
|
|
if (tmp & 0x10)
|
|
return BCM43xx_PCTL_CLKSRC_PCI;
|
|
return BCM43xx_PCTL_CLKSRC_XTALOS;
|
|
}
|
|
}
|
|
if (bcm->current_core->rev < 10) {
|
|
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
|
|
tmp &= 0x7;
|
|
if (tmp == 0)
|
|
return BCM43xx_PCTL_CLKSRC_LOPWROS;
|
|
if (tmp == 1)
|
|
return BCM43xx_PCTL_CLKSRC_XTALOS;
|
|
if (tmp == 2)
|
|
return BCM43xx_PCTL_CLKSRC_PCI;
|
|
}
|
|
|
|
return BCM43xx_PCTL_CLKSRC_XTALOS;
|
|
}
|
|
|
|
/* Get max/min slowclock frequency
|
|
* as described in http://bcm-specs.sipsolutions.net/PowerControl
|
|
*/
|
|
static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
|
|
int get_max)
|
|
{
|
|
int limit;
|
|
int clocksrc;
|
|
int divisor;
|
|
u32 tmp;
|
|
|
|
assert(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL);
|
|
assert(bcm->current_core == &bcm->core_chipcommon);
|
|
|
|
clocksrc = bcm43xx_pctl_get_slowclksrc(bcm);
|
|
if (bcm->current_core->rev < 6) {
|
|
switch (clocksrc) {
|
|
case BCM43xx_PCTL_CLKSRC_PCI:
|
|
divisor = 64;
|
|
break;
|
|
case BCM43xx_PCTL_CLKSRC_XTALOS:
|
|
divisor = 32;
|
|
break;
|
|
default:
|
|
assert(0);
|
|
divisor = 1;
|
|
}
|
|
} else if (bcm->current_core->rev < 10) {
|
|
switch (clocksrc) {
|
|
case BCM43xx_PCTL_CLKSRC_LOPWROS:
|
|
divisor = 1;
|
|
break;
|
|
case BCM43xx_PCTL_CLKSRC_XTALOS:
|
|
case BCM43xx_PCTL_CLKSRC_PCI:
|
|
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
|
|
divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
|
|
divisor *= 4;
|
|
break;
|
|
default:
|
|
assert(0);
|
|
divisor = 1;
|
|
}
|
|
} else {
|
|
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL);
|
|
divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
|
|
divisor *= 4;
|
|
}
|
|
|
|
switch (clocksrc) {
|
|
case BCM43xx_PCTL_CLKSRC_LOPWROS:
|
|
if (get_max)
|
|
limit = 43000;
|
|
else
|
|
limit = 25000;
|
|
break;
|
|
case BCM43xx_PCTL_CLKSRC_XTALOS:
|
|
if (get_max)
|
|
limit = 20200000;
|
|
else
|
|
limit = 19800000;
|
|
break;
|
|
case BCM43xx_PCTL_CLKSRC_PCI:
|
|
if (get_max)
|
|
limit = 34000000;
|
|
else
|
|
limit = 25000000;
|
|
break;
|
|
default:
|
|
assert(0);
|
|
limit = 0;
|
|
}
|
|
limit /= divisor;
|
|
|
|
return limit;
|
|
}
|
|
|
|
|
|
/* init power control
|
|
* as described in http://bcm-specs.sipsolutions.net/PowerControl
|
|
*/
|
|
int bcm43xx_pctl_init(struct bcm43xx_private *bcm)
|
|
{
|
|
int err, maxfreq;
|
|
struct bcm43xx_coreinfo *old_core;
|
|
|
|
old_core = bcm->current_core;
|
|
err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
|
|
if (err == -ENODEV)
|
|
return 0;
|
|
if (err)
|
|
goto out;
|
|
|
|
if (bcm->chip_id == 0x4321) {
|
|
if (bcm->chip_rev == 0)
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x03A4);
|
|
if (bcm->chip_rev == 1)
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x00A4);
|
|
}
|
|
|
|
if (bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) {
|
|
if (bcm->current_core->rev >= 10) {
|
|
/* Set Idle Power clock rate to 1Mhz */
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL,
|
|
(bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL)
|
|
& 0x0000FFFF) | 0x40000);
|
|
} else {
|
|
maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1);
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY,
|
|
(maxfreq * 150 + 999999) / 1000000);
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY,
|
|
(maxfreq * 15 + 999999) / 1000000);
|
|
}
|
|
}
|
|
|
|
err = bcm43xx_switch_core(bcm, old_core);
|
|
assert(err == 0);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
u16 bcm43xx_pctl_powerup_delay(struct bcm43xx_private *bcm)
|
|
{
|
|
u16 delay = 0;
|
|
int err;
|
|
u32 pll_on_delay;
|
|
struct bcm43xx_coreinfo *old_core;
|
|
int minfreq;
|
|
|
|
if (bcm->bustype != BCM43xx_BUSTYPE_PCI)
|
|
goto out;
|
|
if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
|
|
goto out;
|
|
old_core = bcm->current_core;
|
|
err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
|
|
if (err == -ENODEV)
|
|
goto out;
|
|
|
|
minfreq = bcm43xx_pctl_clockfreqlimit(bcm, 0);
|
|
pll_on_delay = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY);
|
|
delay = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
|
|
|
|
err = bcm43xx_switch_core(bcm, old_core);
|
|
assert(err == 0);
|
|
|
|
out:
|
|
return delay;
|
|
}
|
|
|
|
/* set the powercontrol clock
|
|
* as described in http://bcm-specs.sipsolutions.net/PowerControl
|
|
*/
|
|
int bcm43xx_pctl_set_clock(struct bcm43xx_private *bcm, u16 mode)
|
|
{
|
|
int err;
|
|
struct bcm43xx_coreinfo *old_core;
|
|
u32 tmp;
|
|
|
|
old_core = bcm->current_core;
|
|
err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
|
|
if (err == -ENODEV)
|
|
return 0;
|
|
if (err)
|
|
goto out;
|
|
|
|
if (bcm->core_chipcommon.rev < 6) {
|
|
if (mode == BCM43xx_PCTL_CLK_FAST) {
|
|
err = bcm43xx_pctl_set_crystal(bcm, 1);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
} else {
|
|
if ((bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) &&
|
|
(bcm->core_chipcommon.rev < 10)) {
|
|
switch (mode) {
|
|
case BCM43xx_PCTL_CLK_FAST:
|
|
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
|
|
tmp = (tmp & ~BCM43xx_PCTL_FORCE_SLOW) | BCM43xx_PCTL_FORCE_PLL;
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp);
|
|
break;
|
|
case BCM43xx_PCTL_CLK_SLOW:
|
|
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
|
|
tmp |= BCM43xx_PCTL_FORCE_SLOW;
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp);
|
|
break;
|
|
case BCM43xx_PCTL_CLK_DYNAMIC:
|
|
tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
|
|
tmp &= ~BCM43xx_PCTL_FORCE_SLOW;
|
|
tmp |= BCM43xx_PCTL_FORCE_PLL;
|
|
tmp &= ~BCM43xx_PCTL_DYN_XTAL;
|
|
bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp);
|
|
}
|
|
}
|
|
}
|
|
|
|
err = bcm43xx_switch_core(bcm, old_core);
|
|
assert(err == 0);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int bcm43xx_pctl_set_crystal(struct bcm43xx_private *bcm, int on)
|
|
{
|
|
int err;
|
|
u32 in, out, outenable;
|
|
|
|
err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_IN, &in);
|
|
if (err)
|
|
goto err_pci;
|
|
err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &out);
|
|
if (err)
|
|
goto err_pci;
|
|
err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUTENABLE, &outenable);
|
|
if (err)
|
|
goto err_pci;
|
|
|
|
outenable |= (BCM43xx_PCTL_XTAL_POWERUP | BCM43xx_PCTL_PLL_POWERDOWN);
|
|
|
|
if (on) {
|
|
if (in & 0x40)
|
|
return 0;
|
|
|
|
out |= (BCM43xx_PCTL_XTAL_POWERUP | BCM43xx_PCTL_PLL_POWERDOWN);
|
|
|
|
err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out);
|
|
if (err)
|
|
goto err_pci;
|
|
err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUTENABLE, outenable);
|
|
if (err)
|
|
goto err_pci;
|
|
udelay(1000);
|
|
|
|
out &= ~BCM43xx_PCTL_PLL_POWERDOWN;
|
|
err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out);
|
|
if (err)
|
|
goto err_pci;
|
|
udelay(5000);
|
|
} else {
|
|
if (bcm->current_core->rev < 5)
|
|
return 0;
|
|
if (bcm->sprom.boardflags & BCM43xx_BFL_XTAL_NOSLOW)
|
|
return 0;
|
|
|
|
/* XXX: Why BCM43xx_MMIO_RADIO_HWENABLED_xx can't be read at this time?
|
|
* err = bcm43xx_switch_core(bcm, bcm->active_80211_core);
|
|
* if (err)
|
|
* return err;
|
|
* if (((bcm->current_core->rev >= 3) &&
|
|
* (bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI) & (1 << 16))) ||
|
|
* ((bcm->current_core->rev < 3) &&
|
|
* !(bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO) & (1 << 4))))
|
|
* return 0;
|
|
* err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
|
|
* if (err)
|
|
* return err;
|
|
*/
|
|
|
|
err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW);
|
|
if (err)
|
|
goto out;
|
|
out &= ~BCM43xx_PCTL_XTAL_POWERUP;
|
|
out |= BCM43xx_PCTL_PLL_POWERDOWN;
|
|
err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out);
|
|
if (err)
|
|
goto err_pci;
|
|
err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUTENABLE, outenable);
|
|
if (err)
|
|
goto err_pci;
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
|
|
err_pci:
|
|
printk(KERN_ERR PFX "Error: pctl_set_clock() could not access PCI config space!\n");
|
|
err = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
/* Set the PowerSavingControlBits.
|
|
* Bitvalues:
|
|
* 0 => unset the bit
|
|
* 1 => set the bit
|
|
* -1 => calculate the bit
|
|
*/
|
|
void bcm43xx_power_saving_ctl_bits(struct bcm43xx_private *bcm,
|
|
int bit25, int bit26)
|
|
{
|
|
int i;
|
|
u32 status;
|
|
|
|
//FIXME: Force 25 to off and 26 to on for now:
|
|
bit25 = 0;
|
|
bit26 = 1;
|
|
|
|
if (bit25 == -1) {
|
|
//TODO: If powersave is not off and FIXME is not set and we are not in adhoc
|
|
// and thus is not an AP and we are associated, set bit 25
|
|
}
|
|
if (bit26 == -1) {
|
|
//TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
|
|
// or we are associated, or FIXME, or the latest PS-Poll packet sent was
|
|
// successful, set bit26
|
|
}
|
|
status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
|
|
if (bit25)
|
|
status |= BCM43xx_SBF_PS1;
|
|
else
|
|
status &= ~BCM43xx_SBF_PS1;
|
|
if (bit26)
|
|
status |= BCM43xx_SBF_PS2;
|
|
else
|
|
status &= ~BCM43xx_SBF_PS2;
|
|
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
|
|
if (bit26 && bcm->current_core->rev >= 5) {
|
|
for (i = 0; i < 100; i++) {
|
|
if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0040) != 4)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
}
|
|
}
|