kernel_optimize_test/drivers/ssb
Linus Torvalds c0222ac086 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...
2014-12-11 17:56:37 -08:00
..
b43_pci_bridge.c ssb: add PCI ID 0x4351 2014-08-25 15:39:22 -04:00
driver_chipcommon_pmu.c ssb: implement ssb spuravoid for chipid BCM43222 2013-04-26 08:42:22 -04:00
driver_chipcommon_sflash.c ssb: fix sparse warnings in driver_chipcommon_sflash.c 2014-01-03 15:37:01 -05:00
driver_chipcommon.c ssb: Convert ssb_printk to ssb_<level> 2013-03-06 16:24:23 -05:00
driver_extif.c Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2012-12-14 14:27:45 -08:00
driver_gige.c Drivers: ssb: remove __dev* attributes. 2013-01-03 15:57:15 -08:00
driver_gpio.c driver:gpio remove all usage of gpio_remove retval in driver 2014-09-18 11:03:10 -07:00
driver_mipscore.c MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx polling it 2014-11-24 07:44:59 +01:00
driver_pcicore.c ssb: Convert ssb_printk to ssb_<level> 2013-03-06 16:24:23 -05:00
embedded.c ssb: Convert ssb_printk to ssb_<level> 2013-03-06 16:24:23 -05:00
Kconfig ssb: gpio: add own IRQ domain 2014-01-24 22:39:54 +01:00
main.c ssb: gpio: add own IRQ domain 2014-01-24 22:39:54 +01:00
Makefile ssb: add place for serial flash driver 2013-01-09 14:37:09 -05:00
pci.c ssb: extract power info from SPROM revs 4 and 5 2014-07-18 13:45:24 -04:00
pcihost_wrapper.c SSB / B44: fix WOL for BCM4401 2014-12-04 11:32:46 -05:00
pcmcia.c ssb: Convert ssb_printk to ssb_<level> 2013-03-06 16:24:23 -05:00
scan.c ssb: Convert ssb_printk to ssb_<level> 2013-03-06 16:24:23 -05:00
sdio.c
sprom.c ssb: sprom: replace strict_strtoul() with kstrtoul() 2013-06-03 00:39:46 -07:00
ssb_private.h ssb: register serial flash as platform device 2013-06-18 14:46:46 -04:00