forked from luck/tmp_suning_uos_patched
90d6619a91
The VRM value is not read from chip registers, so there's no need to update the device data cache before exporting the VRM value to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
1503 lines
47 KiB
C
1503 lines
47 KiB
C
/*
|
|
* pc87360.c - Part of lm_sensors, Linux kernel modules
|
|
* for hardware monitoring
|
|
* Copyright (C) 2004, 2007 Jean Delvare <khali@linux-fr.org>
|
|
*
|
|
* Copied from smsc47m1.c:
|
|
* Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Supports the following chips:
|
|
*
|
|
* Chip #vin #fan #pwm #temp devid
|
|
* PC87360 - 2 2 - 0xE1
|
|
* PC87363 - 2 2 - 0xE8
|
|
* PC87364 - 3 3 - 0xE4
|
|
* PC87365 11 3 3 2 0xE5
|
|
* PC87366 11 3 3 3-4 0xE9
|
|
*
|
|
* This driver assumes that no more than one chip is present, and one of
|
|
* the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <asm/io.h>
|
|
|
|
static u8 devid;
|
|
static struct platform_device *pdev;
|
|
static unsigned short extra_isa[3];
|
|
static u8 confreg[4];
|
|
|
|
static int init = 1;
|
|
module_param(init, int, 0);
|
|
MODULE_PARM_DESC(init,
|
|
"Chip initialization level:\n"
|
|
" 0: None\n"
|
|
"*1: Forcibly enable internal voltage and temperature channels, except in9\n"
|
|
" 2: Forcibly enable all voltage and temperature channels, except in9\n"
|
|
" 3: Forcibly enable all voltage and temperature channels, including in9");
|
|
|
|
/*
|
|
* Super-I/O registers and operations
|
|
*/
|
|
|
|
#define DEV 0x07 /* Register: Logical device select */
|
|
#define DEVID 0x20 /* Register: Device ID */
|
|
#define ACT 0x30 /* Register: Device activation */
|
|
#define BASE 0x60 /* Register: Base address */
|
|
|
|
#define FSCM 0x09 /* Logical device: fans */
|
|
#define VLM 0x0d /* Logical device: voltages */
|
|
#define TMS 0x0e /* Logical device: temperatures */
|
|
static const u8 logdev[3] = { FSCM, VLM, TMS };
|
|
|
|
#define LD_FAN 0
|
|
#define LD_IN 1
|
|
#define LD_TEMP 2
|
|
|
|
static inline void superio_outb(int sioaddr, int reg, int val)
|
|
{
|
|
outb(reg, sioaddr);
|
|
outb(val, sioaddr+1);
|
|
}
|
|
|
|
static inline int superio_inb(int sioaddr, int reg)
|
|
{
|
|
outb(reg, sioaddr);
|
|
return inb(sioaddr+1);
|
|
}
|
|
|
|
static inline void superio_exit(int sioaddr)
|
|
{
|
|
outb(0x02, sioaddr);
|
|
outb(0x02, sioaddr+1);
|
|
}
|
|
|
|
/*
|
|
* Logical devices
|
|
*/
|
|
|
|
#define PC87360_EXTENT 0x10
|
|
#define PC87365_REG_BANK 0x09
|
|
#define NO_BANK 0xff
|
|
|
|
/*
|
|
* Fan registers and conversions
|
|
*/
|
|
|
|
/* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */
|
|
#define PC87360_REG_PRESCALE(nr) (0x00 + 2 * (nr))
|
|
#define PC87360_REG_PWM(nr) (0x01 + 2 * (nr))
|
|
#define PC87360_REG_FAN_MIN(nr) (0x06 + 3 * (nr))
|
|
#define PC87360_REG_FAN(nr) (0x07 + 3 * (nr))
|
|
#define PC87360_REG_FAN_STATUS(nr) (0x08 + 3 * (nr))
|
|
|
|
#define FAN_FROM_REG(val,div) ((val) == 0 ? 0: \
|
|
480000 / ((val)*(div)))
|
|
#define FAN_TO_REG(val,div) ((val) <= 100 ? 0 : \
|
|
480000 / ((val)*(div)))
|
|
#define FAN_DIV_FROM_REG(val) (1 << ((val >> 5) & 0x03))
|
|
#define FAN_STATUS_FROM_REG(val) ((val) & 0x07)
|
|
|
|
#define FAN_CONFIG_MONITOR(val,nr) (((val) >> (2 + nr * 3)) & 1)
|
|
#define FAN_CONFIG_CONTROL(val,nr) (((val) >> (3 + nr * 3)) & 1)
|
|
#define FAN_CONFIG_INVERT(val,nr) (((val) >> (4 + nr * 3)) & 1)
|
|
|
|
#define PWM_FROM_REG(val,inv) ((inv) ? 255 - (val) : (val))
|
|
static inline u8 PWM_TO_REG(int val, int inv)
|
|
{
|
|
if (inv)
|
|
val = 255 - val;
|
|
if (val < 0)
|
|
return 0;
|
|
if (val > 255)
|
|
return 255;
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* Voltage registers and conversions
|
|
*/
|
|
|
|
#define PC87365_REG_IN_CONVRATE 0x07
|
|
#define PC87365_REG_IN_CONFIG 0x08
|
|
#define PC87365_REG_IN 0x0B
|
|
#define PC87365_REG_IN_MIN 0x0D
|
|
#define PC87365_REG_IN_MAX 0x0C
|
|
#define PC87365_REG_IN_STATUS 0x0A
|
|
#define PC87365_REG_IN_ALARMS1 0x00
|
|
#define PC87365_REG_IN_ALARMS2 0x01
|
|
#define PC87365_REG_VID 0x06
|
|
|
|
#define IN_FROM_REG(val,ref) (((val) * (ref) + 128) / 256)
|
|
#define IN_TO_REG(val,ref) ((val) < 0 ? 0 : \
|
|
(val)*256 >= (ref)*255 ? 255: \
|
|
((val) * 256 + (ref)/2) / (ref))
|
|
|
|
/*
|
|
* Temperature registers and conversions
|
|
*/
|
|
|
|
#define PC87365_REG_TEMP_CONFIG 0x08
|
|
#define PC87365_REG_TEMP 0x0B
|
|
#define PC87365_REG_TEMP_MIN 0x0D
|
|
#define PC87365_REG_TEMP_MAX 0x0C
|
|
#define PC87365_REG_TEMP_CRIT 0x0E
|
|
#define PC87365_REG_TEMP_STATUS 0x0A
|
|
#define PC87365_REG_TEMP_ALARMS 0x00
|
|
|
|
#define TEMP_FROM_REG(val) ((val) * 1000)
|
|
#define TEMP_TO_REG(val) ((val) < -55000 ? -55 : \
|
|
(val) > 127000 ? 127 : \
|
|
(val) < 0 ? ((val) - 500) / 1000 : \
|
|
((val) + 500) / 1000)
|
|
|
|
/*
|
|
* Device data
|
|
*/
|
|
|
|
struct pc87360_data {
|
|
const char *name;
|
|
struct device *hwmon_dev;
|
|
struct mutex lock;
|
|
struct mutex update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
int address[3];
|
|
|
|
u8 fannr, innr, tempnr;
|
|
|
|
u8 fan[3]; /* Register value */
|
|
u8 fan_min[3]; /* Register value */
|
|
u8 fan_status[3]; /* Register value */
|
|
u8 pwm[3]; /* Register value */
|
|
u16 fan_conf; /* Configuration register values, combined */
|
|
|
|
u16 in_vref; /* 1 mV/bit */
|
|
u8 in[14]; /* Register value */
|
|
u8 in_min[14]; /* Register value */
|
|
u8 in_max[14]; /* Register value */
|
|
u8 in_crit[3]; /* Register value */
|
|
u8 in_status[14]; /* Register value */
|
|
u16 in_alarms; /* Register values, combined, masked */
|
|
u8 vid_conf; /* Configuration register value */
|
|
u8 vrm;
|
|
u8 vid; /* Register value */
|
|
|
|
s8 temp[3]; /* Register value */
|
|
s8 temp_min[3]; /* Register value */
|
|
s8 temp_max[3]; /* Register value */
|
|
s8 temp_crit[3]; /* Register value */
|
|
u8 temp_status[3]; /* Register value */
|
|
u8 temp_alarms; /* Register value, masked */
|
|
};
|
|
|
|
/*
|
|
* Functions declaration
|
|
*/
|
|
|
|
static int pc87360_probe(struct platform_device *pdev);
|
|
static int __devexit pc87360_remove(struct platform_device *pdev);
|
|
|
|
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
|
|
u8 reg);
|
|
static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
|
|
u8 reg, u8 value);
|
|
static void pc87360_init_device(struct platform_device *pdev,
|
|
int use_thermistors);
|
|
static struct pc87360_data *pc87360_update_device(struct device *dev);
|
|
|
|
/*
|
|
* Driver data
|
|
*/
|
|
|
|
static struct platform_driver pc87360_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "pc87360",
|
|
},
|
|
.probe = pc87360_probe,
|
|
.remove = __devexit_p(pc87360_remove),
|
|
};
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
static ssize_t show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[attr->index],
|
|
FAN_DIV_FROM_REG(data->fan_status[attr->index])));
|
|
}
|
|
static ssize_t show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[attr->index],
|
|
FAN_DIV_FROM_REG(data->fan_status[attr->index])));
|
|
}
|
|
static ssize_t show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n",
|
|
FAN_DIV_FROM_REG(data->fan_status[attr->index]));
|
|
}
|
|
static ssize_t show_fan_status(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n",
|
|
FAN_STATUS_FROM_REG(data->fan_status[attr->index]));
|
|
}
|
|
static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long fan_min = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index]));
|
|
|
|
/* If it wouldn't fit, change clock divisor */
|
|
while (fan_min > 255
|
|
&& (data->fan_status[attr->index] & 0x60) != 0x60) {
|
|
fan_min >>= 1;
|
|
data->fan[attr->index] >>= 1;
|
|
data->fan_status[attr->index] += 0x20;
|
|
}
|
|
data->fan_min[attr->index] = fan_min > 255 ? 255 : fan_min;
|
|
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(attr->index),
|
|
data->fan_min[attr->index]);
|
|
|
|
/* Write new divider, preserve alarm bits */
|
|
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index),
|
|
data->fan_status[attr->index] & 0xF9);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct sensor_device_attribute fan_input[] = {
|
|
SENSOR_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0),
|
|
SENSOR_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1),
|
|
SENSOR_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2),
|
|
};
|
|
static struct sensor_device_attribute fan_status[] = {
|
|
SENSOR_ATTR(fan1_status, S_IRUGO, show_fan_status, NULL, 0),
|
|
SENSOR_ATTR(fan2_status, S_IRUGO, show_fan_status, NULL, 1),
|
|
SENSOR_ATTR(fan3_status, S_IRUGO, show_fan_status, NULL, 2),
|
|
};
|
|
static struct sensor_device_attribute fan_div[] = {
|
|
SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
|
|
SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
|
|
SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
|
|
};
|
|
static struct sensor_device_attribute fan_min[] = {
|
|
SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 0),
|
|
SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 1),
|
|
SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 2),
|
|
};
|
|
|
|
#define FAN_UNIT_ATTRS(X) \
|
|
&fan_input[X].dev_attr.attr, \
|
|
&fan_status[X].dev_attr.attr, \
|
|
&fan_div[X].dev_attr.attr, \
|
|
&fan_min[X].dev_attr.attr
|
|
|
|
static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n",
|
|
PWM_FROM_REG(data->pwm[attr->index],
|
|
FAN_CONFIG_INVERT(data->fan_conf,
|
|
attr->index)));
|
|
}
|
|
static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->pwm[attr->index] = PWM_TO_REG(val,
|
|
FAN_CONFIG_INVERT(data->fan_conf, attr->index));
|
|
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index),
|
|
data->pwm[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static struct sensor_device_attribute pwm[] = {
|
|
SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0),
|
|
SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1),
|
|
SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2),
|
|
};
|
|
|
|
static struct attribute * pc8736x_fan_attr_array[] = {
|
|
FAN_UNIT_ATTRS(0),
|
|
FAN_UNIT_ATTRS(1),
|
|
FAN_UNIT_ATTRS(2),
|
|
&pwm[0].dev_attr.attr,
|
|
&pwm[1].dev_attr.attr,
|
|
&pwm[2].dev_attr.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group pc8736x_fan_group = {
|
|
.attrs = pc8736x_fan_attr_array,
|
|
};
|
|
|
|
static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_in_status(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->in_status[attr->index]);
|
|
}
|
|
static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
|
|
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN,
|
|
data->in_min[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_max[attr->index] = IN_TO_REG(val,
|
|
data->in_vref);
|
|
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX,
|
|
data->in_max[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static struct sensor_device_attribute in_input[] = {
|
|
SENSOR_ATTR(in0_input, S_IRUGO, show_in_input, NULL, 0),
|
|
SENSOR_ATTR(in1_input, S_IRUGO, show_in_input, NULL, 1),
|
|
SENSOR_ATTR(in2_input, S_IRUGO, show_in_input, NULL, 2),
|
|
SENSOR_ATTR(in3_input, S_IRUGO, show_in_input, NULL, 3),
|
|
SENSOR_ATTR(in4_input, S_IRUGO, show_in_input, NULL, 4),
|
|
SENSOR_ATTR(in5_input, S_IRUGO, show_in_input, NULL, 5),
|
|
SENSOR_ATTR(in6_input, S_IRUGO, show_in_input, NULL, 6),
|
|
SENSOR_ATTR(in7_input, S_IRUGO, show_in_input, NULL, 7),
|
|
SENSOR_ATTR(in8_input, S_IRUGO, show_in_input, NULL, 8),
|
|
SENSOR_ATTR(in9_input, S_IRUGO, show_in_input, NULL, 9),
|
|
SENSOR_ATTR(in10_input, S_IRUGO, show_in_input, NULL, 10),
|
|
};
|
|
static struct sensor_device_attribute in_status[] = {
|
|
SENSOR_ATTR(in0_status, S_IRUGO, show_in_status, NULL, 0),
|
|
SENSOR_ATTR(in1_status, S_IRUGO, show_in_status, NULL, 1),
|
|
SENSOR_ATTR(in2_status, S_IRUGO, show_in_status, NULL, 2),
|
|
SENSOR_ATTR(in3_status, S_IRUGO, show_in_status, NULL, 3),
|
|
SENSOR_ATTR(in4_status, S_IRUGO, show_in_status, NULL, 4),
|
|
SENSOR_ATTR(in5_status, S_IRUGO, show_in_status, NULL, 5),
|
|
SENSOR_ATTR(in6_status, S_IRUGO, show_in_status, NULL, 6),
|
|
SENSOR_ATTR(in7_status, S_IRUGO, show_in_status, NULL, 7),
|
|
SENSOR_ATTR(in8_status, S_IRUGO, show_in_status, NULL, 8),
|
|
SENSOR_ATTR(in9_status, S_IRUGO, show_in_status, NULL, 9),
|
|
SENSOR_ATTR(in10_status, S_IRUGO, show_in_status, NULL, 10),
|
|
};
|
|
static struct sensor_device_attribute in_min[] = {
|
|
SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 0),
|
|
SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 1),
|
|
SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 2),
|
|
SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 3),
|
|
SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 4),
|
|
SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 5),
|
|
SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 6),
|
|
SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 7),
|
|
SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 8),
|
|
SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 9),
|
|
SENSOR_ATTR(in10_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 10),
|
|
};
|
|
static struct sensor_device_attribute in_max[] = {
|
|
SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 0),
|
|
SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 1),
|
|
SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 2),
|
|
SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 3),
|
|
SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 4),
|
|
SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 5),
|
|
SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 6),
|
|
SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 7),
|
|
SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 8),
|
|
SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 9),
|
|
SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10),
|
|
};
|
|
|
|
#define VIN_UNIT_ATTRS(X) \
|
|
&in_input[X].dev_attr.attr, \
|
|
&in_status[X].dev_attr.attr, \
|
|
&in_min[X].dev_attr.attr, \
|
|
&in_max[X].dev_attr.attr
|
|
|
|
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
|
|
|
|
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%u\n", data->vrm);
|
|
}
|
|
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
data->vrm = simple_strtoul(buf, NULL, 10);
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
|
|
|
|
static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->in_alarms);
|
|
}
|
|
static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL);
|
|
|
|
static struct attribute *pc8736x_vin_attr_array[] = {
|
|
VIN_UNIT_ATTRS(0),
|
|
VIN_UNIT_ATTRS(1),
|
|
VIN_UNIT_ATTRS(2),
|
|
VIN_UNIT_ATTRS(3),
|
|
VIN_UNIT_ATTRS(4),
|
|
VIN_UNIT_ATTRS(5),
|
|
VIN_UNIT_ATTRS(6),
|
|
VIN_UNIT_ATTRS(7),
|
|
VIN_UNIT_ATTRS(8),
|
|
VIN_UNIT_ATTRS(9),
|
|
VIN_UNIT_ATTRS(10),
|
|
&dev_attr_cpu0_vid.attr,
|
|
&dev_attr_vrm.attr,
|
|
&dev_attr_alarms_in.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group pc8736x_vin_group = {
|
|
.attrs = pc8736x_vin_attr_array,
|
|
};
|
|
|
|
static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_therm_min(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_therm_max(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_therm_crit(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[attr->index-11],
|
|
data->in_vref));
|
|
}
|
|
static ssize_t show_therm_status(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->in_status[attr->index]);
|
|
}
|
|
static ssize_t set_therm_min(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
|
|
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN,
|
|
data->in_min[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_max[attr->index] = IN_TO_REG(val, data->in_vref);
|
|
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX,
|
|
data->in_max[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref);
|
|
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT,
|
|
data->in_crit[attr->index-11]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/* the +11 term below reflects the fact that VLM units 11,12,13 are
|
|
used in the chip to measure voltage across the thermistors
|
|
*/
|
|
static struct sensor_device_attribute therm_input[] = {
|
|
SENSOR_ATTR(temp4_input, S_IRUGO, show_therm_input, NULL, 0+11),
|
|
SENSOR_ATTR(temp5_input, S_IRUGO, show_therm_input, NULL, 1+11),
|
|
SENSOR_ATTR(temp6_input, S_IRUGO, show_therm_input, NULL, 2+11),
|
|
};
|
|
static struct sensor_device_attribute therm_status[] = {
|
|
SENSOR_ATTR(temp4_status, S_IRUGO, show_therm_status, NULL, 0+11),
|
|
SENSOR_ATTR(temp5_status, S_IRUGO, show_therm_status, NULL, 1+11),
|
|
SENSOR_ATTR(temp6_status, S_IRUGO, show_therm_status, NULL, 2+11),
|
|
};
|
|
static struct sensor_device_attribute therm_min[] = {
|
|
SENSOR_ATTR(temp4_min, S_IRUGO | S_IWUSR,
|
|
show_therm_min, set_therm_min, 0+11),
|
|
SENSOR_ATTR(temp5_min, S_IRUGO | S_IWUSR,
|
|
show_therm_min, set_therm_min, 1+11),
|
|
SENSOR_ATTR(temp6_min, S_IRUGO | S_IWUSR,
|
|
show_therm_min, set_therm_min, 2+11),
|
|
};
|
|
static struct sensor_device_attribute therm_max[] = {
|
|
SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR,
|
|
show_therm_max, set_therm_max, 0+11),
|
|
SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR,
|
|
show_therm_max, set_therm_max, 1+11),
|
|
SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR,
|
|
show_therm_max, set_therm_max, 2+11),
|
|
};
|
|
static struct sensor_device_attribute therm_crit[] = {
|
|
SENSOR_ATTR(temp4_crit, S_IRUGO | S_IWUSR,
|
|
show_therm_crit, set_therm_crit, 0+11),
|
|
SENSOR_ATTR(temp5_crit, S_IRUGO | S_IWUSR,
|
|
show_therm_crit, set_therm_crit, 1+11),
|
|
SENSOR_ATTR(temp6_crit, S_IRUGO | S_IWUSR,
|
|
show_therm_crit, set_therm_crit, 2+11),
|
|
};
|
|
|
|
#define THERM_UNIT_ATTRS(X) \
|
|
&therm_input[X].dev_attr.attr, \
|
|
&therm_status[X].dev_attr.attr, \
|
|
&therm_min[X].dev_attr.attr, \
|
|
&therm_max[X].dev_attr.attr, \
|
|
&therm_crit[X].dev_attr.attr
|
|
|
|
static struct attribute * pc8736x_therm_attr_array[] = {
|
|
THERM_UNIT_ATTRS(0),
|
|
THERM_UNIT_ATTRS(1),
|
|
THERM_UNIT_ATTRS(2),
|
|
NULL
|
|
};
|
|
static const struct attribute_group pc8736x_therm_group = {
|
|
.attrs = pc8736x_therm_attr_array,
|
|
};
|
|
|
|
static ssize_t show_temp_input(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
|
|
}
|
|
static ssize_t show_temp_min(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[attr->index]));
|
|
}
|
|
static ssize_t show_temp_max(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[attr->index]));
|
|
}
|
|
static ssize_t show_temp_crit(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[attr->index]));
|
|
}
|
|
static ssize_t show_temp_status(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->temp_status[attr->index]);
|
|
}
|
|
static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_min[attr->index] = TEMP_TO_REG(val);
|
|
pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN,
|
|
data->temp_min[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_max[attr->index] = TEMP_TO_REG(val);
|
|
pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX,
|
|
data->temp_max[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_crit[attr->index] = TEMP_TO_REG(val);
|
|
pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT,
|
|
data->temp_crit[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static struct sensor_device_attribute temp_input[] = {
|
|
SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0),
|
|
SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1),
|
|
SENSOR_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2),
|
|
};
|
|
static struct sensor_device_attribute temp_status[] = {
|
|
SENSOR_ATTR(temp1_status, S_IRUGO, show_temp_status, NULL, 0),
|
|
SENSOR_ATTR(temp2_status, S_IRUGO, show_temp_status, NULL, 1),
|
|
SENSOR_ATTR(temp3_status, S_IRUGO, show_temp_status, NULL, 2),
|
|
};
|
|
static struct sensor_device_attribute temp_min[] = {
|
|
SENSOR_ATTR(temp1_min, S_IRUGO | S_IWUSR,
|
|
show_temp_min, set_temp_min, 0),
|
|
SENSOR_ATTR(temp2_min, S_IRUGO | S_IWUSR,
|
|
show_temp_min, set_temp_min, 1),
|
|
SENSOR_ATTR(temp3_min, S_IRUGO | S_IWUSR,
|
|
show_temp_min, set_temp_min, 2),
|
|
};
|
|
static struct sensor_device_attribute temp_max[] = {
|
|
SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR,
|
|
show_temp_max, set_temp_max, 0),
|
|
SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR,
|
|
show_temp_max, set_temp_max, 1),
|
|
SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR,
|
|
show_temp_max, set_temp_max, 2),
|
|
};
|
|
static struct sensor_device_attribute temp_crit[] = {
|
|
SENSOR_ATTR(temp1_crit, S_IRUGO | S_IWUSR,
|
|
show_temp_crit, set_temp_crit, 0),
|
|
SENSOR_ATTR(temp2_crit, S_IRUGO | S_IWUSR,
|
|
show_temp_crit, set_temp_crit, 1),
|
|
SENSOR_ATTR(temp3_crit, S_IRUGO | S_IWUSR,
|
|
show_temp_crit, set_temp_crit, 2),
|
|
};
|
|
|
|
static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pc87360_data *data = pc87360_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->temp_alarms);
|
|
}
|
|
static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL);
|
|
|
|
#define TEMP_UNIT_ATTRS(X) \
|
|
&temp_input[X].dev_attr.attr, \
|
|
&temp_status[X].dev_attr.attr, \
|
|
&temp_min[X].dev_attr.attr, \
|
|
&temp_max[X].dev_attr.attr, \
|
|
&temp_crit[X].dev_attr.attr
|
|
|
|
static struct attribute * pc8736x_temp_attr_array[] = {
|
|
TEMP_UNIT_ATTRS(0),
|
|
TEMP_UNIT_ATTRS(1),
|
|
TEMP_UNIT_ATTRS(2),
|
|
/* include the few miscellaneous atts here */
|
|
&dev_attr_alarms_temp.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group pc8736x_temp_group = {
|
|
.attrs = pc8736x_temp_attr_array,
|
|
};
|
|
|
|
static ssize_t show_name(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
|
|
|
|
/*
|
|
* Device detection, registration and update
|
|
*/
|
|
|
|
static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses)
|
|
{
|
|
u16 val;
|
|
int i;
|
|
int nrdev; /* logical device count */
|
|
|
|
/* No superio_enter */
|
|
|
|
/* Identify device */
|
|
val = superio_inb(sioaddr, DEVID);
|
|
switch (val) {
|
|
case 0xE1: /* PC87360 */
|
|
case 0xE8: /* PC87363 */
|
|
case 0xE4: /* PC87364 */
|
|
nrdev = 1;
|
|
break;
|
|
case 0xE5: /* PC87365 */
|
|
case 0xE9: /* PC87366 */
|
|
nrdev = 3;
|
|
break;
|
|
default:
|
|
superio_exit(sioaddr);
|
|
return -ENODEV;
|
|
}
|
|
/* Remember the device id */
|
|
*devid = val;
|
|
|
|
for (i = 0; i < nrdev; i++) {
|
|
/* select logical device */
|
|
superio_outb(sioaddr, DEV, logdev[i]);
|
|
|
|
val = superio_inb(sioaddr, ACT);
|
|
if (!(val & 0x01)) {
|
|
printk(KERN_INFO "pc87360: Device 0x%02x not "
|
|
"activated\n", logdev[i]);
|
|
continue;
|
|
}
|
|
|
|
val = (superio_inb(sioaddr, BASE) << 8)
|
|
| superio_inb(sioaddr, BASE + 1);
|
|
if (!val) {
|
|
printk(KERN_INFO "pc87360: Base address not set for "
|
|
"device 0x%02x\n", logdev[i]);
|
|
continue;
|
|
}
|
|
|
|
addresses[i] = val;
|
|
|
|
if (i==0) { /* Fans */
|
|
confreg[0] = superio_inb(sioaddr, 0xF0);
|
|
confreg[1] = superio_inb(sioaddr, 0xF1);
|
|
|
|
#ifdef DEBUG
|
|
printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
|
|
"ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
|
|
(confreg[0]>>3)&1, (confreg[0]>>4)&1);
|
|
printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
|
|
"ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
|
|
(confreg[0]>>6)&1, (confreg[0]>>7)&1);
|
|
printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
|
|
"ctrl=%d inv=%d\n", confreg[1]&1,
|
|
(confreg[1]>>1)&1, (confreg[1]>>2)&1);
|
|
#endif
|
|
} else if (i==1) { /* Voltages */
|
|
/* Are we using thermistors? */
|
|
if (*devid == 0xE9) { /* PC87366 */
|
|
/* These registers are not logical-device
|
|
specific, just that we won't need them if
|
|
we don't use the VLM device */
|
|
confreg[2] = superio_inb(sioaddr, 0x2B);
|
|
confreg[3] = superio_inb(sioaddr, 0x25);
|
|
|
|
if (confreg[2] & 0x40) {
|
|
printk(KERN_INFO "pc87360: Using "
|
|
"thermistors for temperature "
|
|
"monitoring\n");
|
|
}
|
|
if (confreg[3] & 0xE0) {
|
|
printk(KERN_INFO "pc87360: VID "
|
|
"inputs routed (mode %u)\n",
|
|
confreg[3] >> 5);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
superio_exit(sioaddr);
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit pc87360_probe(struct platform_device *pdev)
|
|
{
|
|
int i;
|
|
struct pc87360_data *data;
|
|
int err = 0;
|
|
const char *name = "pc87360";
|
|
int use_thermistors = 0;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
|
|
return -ENOMEM;
|
|
|
|
data->fannr = 2;
|
|
data->innr = 0;
|
|
data->tempnr = 0;
|
|
|
|
switch (devid) {
|
|
case 0xe8:
|
|
name = "pc87363";
|
|
break;
|
|
case 0xe4:
|
|
name = "pc87364";
|
|
data->fannr = 3;
|
|
break;
|
|
case 0xe5:
|
|
name = "pc87365";
|
|
data->fannr = extra_isa[0] ? 3 : 0;
|
|
data->innr = extra_isa[1] ? 11 : 0;
|
|
data->tempnr = extra_isa[2] ? 2 : 0;
|
|
break;
|
|
case 0xe9:
|
|
name = "pc87366";
|
|
data->fannr = extra_isa[0] ? 3 : 0;
|
|
data->innr = extra_isa[1] ? 14 : 0;
|
|
data->tempnr = extra_isa[2] ? 3 : 0;
|
|
break;
|
|
}
|
|
|
|
data->name = name;
|
|
data->valid = 0;
|
|
mutex_init(&data->lock);
|
|
mutex_init(&data->update_lock);
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (((data->address[i] = extra_isa[i]))
|
|
&& !request_region(extra_isa[i], PC87360_EXTENT,
|
|
pc87360_driver.driver.name)) {
|
|
dev_err(dev, "Region 0x%x-0x%x already "
|
|
"in use!\n", extra_isa[i],
|
|
extra_isa[i]+PC87360_EXTENT-1);
|
|
for (i--; i >= 0; i--)
|
|
release_region(extra_isa[i], PC87360_EXTENT);
|
|
err = -EBUSY;
|
|
goto ERROR1;
|
|
}
|
|
}
|
|
|
|
/* Retrieve the fans configuration from Super-I/O space */
|
|
if (data->fannr)
|
|
data->fan_conf = confreg[0] | (confreg[1] << 8);
|
|
|
|
/* Use the correct reference voltage
|
|
Unless both the VLM and the TMS logical devices agree to
|
|
use an external Vref, the internal one is used. */
|
|
if (data->innr) {
|
|
i = pc87360_read_value(data, LD_IN, NO_BANK,
|
|
PC87365_REG_IN_CONFIG);
|
|
if (data->tempnr) {
|
|
i &= pc87360_read_value(data, LD_TEMP, NO_BANK,
|
|
PC87365_REG_TEMP_CONFIG);
|
|
}
|
|
data->in_vref = (i&0x02) ? 3025 : 2966;
|
|
dev_dbg(dev, "Using %s reference voltage\n",
|
|
(i&0x02) ? "external" : "internal");
|
|
|
|
data->vid_conf = confreg[3];
|
|
data->vrm = vid_which_vrm();
|
|
}
|
|
|
|
/* Fan clock dividers may be needed before any data is read */
|
|
for (i = 0; i < data->fannr; i++) {
|
|
if (FAN_CONFIG_MONITOR(data->fan_conf, i))
|
|
data->fan_status[i] = pc87360_read_value(data,
|
|
LD_FAN, NO_BANK,
|
|
PC87360_REG_FAN_STATUS(i));
|
|
}
|
|
|
|
if (init > 0) {
|
|
if (devid == 0xe9 && data->address[1]) /* PC87366 */
|
|
use_thermistors = confreg[2] & 0x40;
|
|
|
|
pc87360_init_device(pdev, use_thermistors);
|
|
}
|
|
|
|
/* Register all-or-nothing sysfs groups */
|
|
|
|
if (data->innr &&
|
|
(err = sysfs_create_group(&dev->kobj,
|
|
&pc8736x_vin_group)))
|
|
goto ERROR3;
|
|
|
|
if (data->innr == 14 &&
|
|
(err = sysfs_create_group(&dev->kobj,
|
|
&pc8736x_therm_group)))
|
|
goto ERROR3;
|
|
|
|
/* create device attr-files for varying sysfs groups */
|
|
|
|
if (data->tempnr) {
|
|
for (i = 0; i < data->tempnr; i++) {
|
|
if ((err = device_create_file(dev,
|
|
&temp_input[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&temp_min[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&temp_max[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&temp_crit[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&temp_status[i].dev_attr)))
|
|
goto ERROR3;
|
|
}
|
|
if ((err = device_create_file(dev, &dev_attr_alarms_temp)))
|
|
goto ERROR3;
|
|
}
|
|
|
|
for (i = 0; i < data->fannr; i++) {
|
|
if (FAN_CONFIG_MONITOR(data->fan_conf, i)
|
|
&& ((err = device_create_file(dev,
|
|
&fan_input[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&fan_min[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&fan_div[i].dev_attr))
|
|
|| (err = device_create_file(dev,
|
|
&fan_status[i].dev_attr))))
|
|
goto ERROR3;
|
|
|
|
if (FAN_CONFIG_CONTROL(data->fan_conf, i)
|
|
&& (err = device_create_file(dev, &pwm[i].dev_attr)))
|
|
goto ERROR3;
|
|
}
|
|
|
|
if ((err = device_create_file(dev, &dev_attr_name)))
|
|
goto ERROR3;
|
|
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto ERROR3;
|
|
}
|
|
return 0;
|
|
|
|
ERROR3:
|
|
device_remove_file(dev, &dev_attr_name);
|
|
/* can still remove groups whose members were added individually */
|
|
sysfs_remove_group(&dev->kobj, &pc8736x_temp_group);
|
|
sysfs_remove_group(&dev->kobj, &pc8736x_fan_group);
|
|
sysfs_remove_group(&dev->kobj, &pc8736x_therm_group);
|
|
sysfs_remove_group(&dev->kobj, &pc8736x_vin_group);
|
|
for (i = 0; i < 3; i++) {
|
|
if (data->address[i]) {
|
|
release_region(data->address[i], PC87360_EXTENT);
|
|
}
|
|
}
|
|
ERROR1:
|
|
kfree(data);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit pc87360_remove(struct platform_device *pdev)
|
|
{
|
|
struct pc87360_data *data = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
device_remove_file(&pdev->dev, &dev_attr_name);
|
|
sysfs_remove_group(&pdev->dev.kobj, &pc8736x_temp_group);
|
|
sysfs_remove_group(&pdev->dev.kobj, &pc8736x_fan_group);
|
|
sysfs_remove_group(&pdev->dev.kobj, &pc8736x_therm_group);
|
|
sysfs_remove_group(&pdev->dev.kobj, &pc8736x_vin_group);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (data->address[i]) {
|
|
release_region(data->address[i], PC87360_EXTENT);
|
|
}
|
|
}
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ldi is the logical device index
|
|
bank is for voltages and temperatures only */
|
|
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
|
|
u8 reg)
|
|
{
|
|
int res;
|
|
|
|
mutex_lock(&(data->lock));
|
|
if (bank != NO_BANK)
|
|
outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
|
|
res = inb_p(data->address[ldi] + reg);
|
|
mutex_unlock(&(data->lock));
|
|
|
|
return res;
|
|
}
|
|
|
|
static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
|
|
u8 reg, u8 value)
|
|
{
|
|
mutex_lock(&(data->lock));
|
|
if (bank != NO_BANK)
|
|
outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
|
|
outb_p(value, data->address[ldi] + reg);
|
|
mutex_unlock(&(data->lock));
|
|
}
|
|
|
|
static void pc87360_init_device(struct platform_device *pdev,
|
|
int use_thermistors)
|
|
{
|
|
struct pc87360_data *data = platform_get_drvdata(pdev);
|
|
int i, nr;
|
|
const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 };
|
|
const u8 init_temp[3] = { 2, 2, 1 };
|
|
u8 reg;
|
|
|
|
if (init >= 2 && data->innr) {
|
|
reg = pc87360_read_value(data, LD_IN, NO_BANK,
|
|
PC87365_REG_IN_CONVRATE);
|
|
dev_info(&pdev->dev, "VLM conversion set to "
|
|
"1s period, 160us delay\n");
|
|
pc87360_write_value(data, LD_IN, NO_BANK,
|
|
PC87365_REG_IN_CONVRATE,
|
|
(reg & 0xC0) | 0x11);
|
|
}
|
|
|
|
nr = data->innr < 11 ? data->innr : 11;
|
|
for (i = 0; i < nr; i++) {
|
|
if (init >= init_in[i]) {
|
|
/* Forcibly enable voltage channel */
|
|
reg = pc87360_read_value(data, LD_IN, i,
|
|
PC87365_REG_IN_STATUS);
|
|
if (!(reg & 0x01)) {
|
|
dev_dbg(&pdev->dev, "Forcibly "
|
|
"enabling in%d\n", i);
|
|
pc87360_write_value(data, LD_IN, i,
|
|
PC87365_REG_IN_STATUS,
|
|
(reg & 0x68) | 0x87);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* We can't blindly trust the Super-I/O space configuration bit,
|
|
most BIOS won't set it properly */
|
|
for (i = 11; i < data->innr; i++) {
|
|
reg = pc87360_read_value(data, LD_IN, i,
|
|
PC87365_REG_TEMP_STATUS);
|
|
use_thermistors = use_thermistors || (reg & 0x01);
|
|
}
|
|
|
|
i = use_thermistors ? 2 : 0;
|
|
for (; i < data->tempnr; i++) {
|
|
if (init >= init_temp[i]) {
|
|
/* Forcibly enable temperature channel */
|
|
reg = pc87360_read_value(data, LD_TEMP, i,
|
|
PC87365_REG_TEMP_STATUS);
|
|
if (!(reg & 0x01)) {
|
|
dev_dbg(&pdev->dev, "Forcibly "
|
|
"enabling temp%d\n", i+1);
|
|
pc87360_write_value(data, LD_TEMP, i,
|
|
PC87365_REG_TEMP_STATUS,
|
|
0xCF);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (use_thermistors) {
|
|
for (i = 11; i < data->innr; i++) {
|
|
if (init >= init_in[i]) {
|
|
/* The pin may already be used by thermal
|
|
diodes */
|
|
reg = pc87360_read_value(data, LD_TEMP,
|
|
(i-11)/2, PC87365_REG_TEMP_STATUS);
|
|
if (reg & 0x01) {
|
|
dev_dbg(&pdev->dev, "Skipping "
|
|
"temp%d, pin already in use "
|
|
"by temp%d\n", i-7, (i-11)/2);
|
|
continue;
|
|
}
|
|
|
|
/* Forcibly enable thermistor channel */
|
|
reg = pc87360_read_value(data, LD_IN, i,
|
|
PC87365_REG_IN_STATUS);
|
|
if (!(reg & 0x01)) {
|
|
dev_dbg(&pdev->dev, "Forcibly "
|
|
"enabling temp%d\n", i-7);
|
|
pc87360_write_value(data, LD_IN, i,
|
|
PC87365_REG_TEMP_STATUS,
|
|
(reg & 0x60) | 0x8F);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (data->innr) {
|
|
reg = pc87360_read_value(data, LD_IN, NO_BANK,
|
|
PC87365_REG_IN_CONFIG);
|
|
if (reg & 0x01) {
|
|
dev_dbg(&pdev->dev, "Forcibly "
|
|
"enabling monitoring (VLM)\n");
|
|
pc87360_write_value(data, LD_IN, NO_BANK,
|
|
PC87365_REG_IN_CONFIG,
|
|
reg & 0xFE);
|
|
}
|
|
}
|
|
|
|
if (data->tempnr) {
|
|
reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
|
|
PC87365_REG_TEMP_CONFIG);
|
|
if (reg & 0x01) {
|
|
dev_dbg(&pdev->dev, "Forcibly enabling "
|
|
"monitoring (TMS)\n");
|
|
pc87360_write_value(data, LD_TEMP, NO_BANK,
|
|
PC87365_REG_TEMP_CONFIG,
|
|
reg & 0xFE);
|
|
}
|
|
|
|
if (init >= 2) {
|
|
/* Chip config as documented by National Semi. */
|
|
pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08);
|
|
/* We voluntarily omit the bank here, in case the
|
|
sequence itself matters. It shouldn't be a problem,
|
|
since nobody else is supposed to access the
|
|
device at that point. */
|
|
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04);
|
|
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35);
|
|
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05);
|
|
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pc87360_autodiv(struct device *dev, int nr)
|
|
{
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
u8 old_min = data->fan_min[nr];
|
|
|
|
/* Increase clock divider if needed and possible */
|
|
if ((data->fan_status[nr] & 0x04) /* overflow flag */
|
|
|| (data->fan[nr] >= 224)) { /* next to overflow */
|
|
if ((data->fan_status[nr] & 0x60) != 0x60) {
|
|
data->fan_status[nr] += 0x20;
|
|
data->fan_min[nr] >>= 1;
|
|
data->fan[nr] >>= 1;
|
|
dev_dbg(dev, "Increasing "
|
|
"clock divider to %d for fan %d\n",
|
|
FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1);
|
|
}
|
|
} else {
|
|
/* Decrease clock divider if possible */
|
|
while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */
|
|
&& data->fan[nr] < 85 /* bad accuracy */
|
|
&& (data->fan_status[nr] & 0x60) != 0x00) {
|
|
data->fan_status[nr] -= 0x20;
|
|
data->fan_min[nr] <<= 1;
|
|
data->fan[nr] <<= 1;
|
|
dev_dbg(dev, "Decreasing "
|
|
"clock divider to %d for fan %d\n",
|
|
FAN_DIV_FROM_REG(data->fan_status[nr]),
|
|
nr+1);
|
|
}
|
|
}
|
|
|
|
/* Write new fan min if it changed */
|
|
if (old_min != data->fan_min[nr]) {
|
|
pc87360_write_value(data, LD_FAN, NO_BANK,
|
|
PC87360_REG_FAN_MIN(nr),
|
|
data->fan_min[nr]);
|
|
}
|
|
}
|
|
|
|
static struct pc87360_data *pc87360_update_device(struct device *dev)
|
|
{
|
|
struct pc87360_data *data = dev_get_drvdata(dev);
|
|
u8 i;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
|
|
dev_dbg(dev, "Data update\n");
|
|
|
|
/* Fans */
|
|
for (i = 0; i < data->fannr; i++) {
|
|
if (FAN_CONFIG_MONITOR(data->fan_conf, i)) {
|
|
data->fan_status[i] =
|
|
pc87360_read_value(data, LD_FAN,
|
|
NO_BANK, PC87360_REG_FAN_STATUS(i));
|
|
data->fan[i] = pc87360_read_value(data, LD_FAN,
|
|
NO_BANK, PC87360_REG_FAN(i));
|
|
data->fan_min[i] = pc87360_read_value(data,
|
|
LD_FAN, NO_BANK,
|
|
PC87360_REG_FAN_MIN(i));
|
|
/* Change clock divider if needed */
|
|
pc87360_autodiv(dev, i);
|
|
/* Clear bits and write new divider */
|
|
pc87360_write_value(data, LD_FAN, NO_BANK,
|
|
PC87360_REG_FAN_STATUS(i),
|
|
data->fan_status[i]);
|
|
}
|
|
if (FAN_CONFIG_CONTROL(data->fan_conf, i))
|
|
data->pwm[i] = pc87360_read_value(data, LD_FAN,
|
|
NO_BANK, PC87360_REG_PWM(i));
|
|
}
|
|
|
|
/* Voltages */
|
|
for (i = 0; i < data->innr; i++) {
|
|
data->in_status[i] = pc87360_read_value(data, LD_IN, i,
|
|
PC87365_REG_IN_STATUS);
|
|
/* Clear bits */
|
|
pc87360_write_value(data, LD_IN, i,
|
|
PC87365_REG_IN_STATUS,
|
|
data->in_status[i]);
|
|
if ((data->in_status[i] & 0x81) == 0x81) {
|
|
data->in[i] = pc87360_read_value(data, LD_IN,
|
|
i, PC87365_REG_IN);
|
|
}
|
|
if (data->in_status[i] & 0x01) {
|
|
data->in_min[i] = pc87360_read_value(data,
|
|
LD_IN, i,
|
|
PC87365_REG_IN_MIN);
|
|
data->in_max[i] = pc87360_read_value(data,
|
|
LD_IN, i,
|
|
PC87365_REG_IN_MAX);
|
|
if (i >= 11)
|
|
data->in_crit[i-11] =
|
|
pc87360_read_value(data, LD_IN,
|
|
i, PC87365_REG_TEMP_CRIT);
|
|
}
|
|
}
|
|
if (data->innr) {
|
|
data->in_alarms = pc87360_read_value(data, LD_IN,
|
|
NO_BANK, PC87365_REG_IN_ALARMS1)
|
|
| ((pc87360_read_value(data, LD_IN,
|
|
NO_BANK, PC87365_REG_IN_ALARMS2)
|
|
& 0x07) << 8);
|
|
data->vid = (data->vid_conf & 0xE0) ?
|
|
pc87360_read_value(data, LD_IN,
|
|
NO_BANK, PC87365_REG_VID) : 0x1F;
|
|
}
|
|
|
|
/* Temperatures */
|
|
for (i = 0; i < data->tempnr; i++) {
|
|
data->temp_status[i] = pc87360_read_value(data,
|
|
LD_TEMP, i,
|
|
PC87365_REG_TEMP_STATUS);
|
|
/* Clear bits */
|
|
pc87360_write_value(data, LD_TEMP, i,
|
|
PC87365_REG_TEMP_STATUS,
|
|
data->temp_status[i]);
|
|
if ((data->temp_status[i] & 0x81) == 0x81) {
|
|
data->temp[i] = pc87360_read_value(data,
|
|
LD_TEMP, i,
|
|
PC87365_REG_TEMP);
|
|
}
|
|
if (data->temp_status[i] & 0x01) {
|
|
data->temp_min[i] = pc87360_read_value(data,
|
|
LD_TEMP, i,
|
|
PC87365_REG_TEMP_MIN);
|
|
data->temp_max[i] = pc87360_read_value(data,
|
|
LD_TEMP, i,
|
|
PC87365_REG_TEMP_MAX);
|
|
data->temp_crit[i] = pc87360_read_value(data,
|
|
LD_TEMP, i,
|
|
PC87365_REG_TEMP_CRIT);
|
|
}
|
|
}
|
|
if (data->tempnr) {
|
|
data->temp_alarms = pc87360_read_value(data, LD_TEMP,
|
|
NO_BANK, PC87365_REG_TEMP_ALARMS)
|
|
& 0x3F;
|
|
}
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static int __init pc87360_device_add(unsigned short address)
|
|
{
|
|
struct resource res = {
|
|
.name = "pc87360",
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err, i;
|
|
|
|
pdev = platform_device_alloc("pc87360", address);
|
|
if (!pdev) {
|
|
err = -ENOMEM;
|
|
printk(KERN_ERR "pc87360: Device allocation failed\n");
|
|
goto exit;
|
|
}
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (!extra_isa[i])
|
|
continue;
|
|
res.start = extra_isa[i];
|
|
res.end = extra_isa[i] + PC87360_EXTENT - 1;
|
|
err = platform_device_add_resources(pdev, &res, 1);
|
|
if (err) {
|
|
printk(KERN_ERR "pc87360: Device resource[%d] "
|
|
"addition failed (%d)\n", i, err);
|
|
goto exit_device_put;
|
|
}
|
|
}
|
|
|
|
err = platform_device_add(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR "pc87360: Device addition failed (%d)\n",
|
|
err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __init pc87360_init(void)
|
|
{
|
|
int err, i;
|
|
unsigned short address = 0;
|
|
|
|
if (pc87360_find(0x2e, &devid, extra_isa)
|
|
&& pc87360_find(0x4e, &devid, extra_isa)) {
|
|
printk(KERN_WARNING "pc87360: PC8736x not detected, "
|
|
"module not inserted.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Arbitrarily pick one of the addresses */
|
|
for (i = 0; i < 3; i++) {
|
|
if (extra_isa[i] != 0x0000) {
|
|
address = extra_isa[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (address == 0x0000) {
|
|
printk(KERN_WARNING "pc87360: No active logical device, "
|
|
"module not inserted.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
err = platform_driver_register(&pc87360_driver);
|
|
if (err)
|
|
goto exit;
|
|
|
|
/* Sets global pdev as a side effect */
|
|
err = pc87360_device_add(address);
|
|
if (err)
|
|
goto exit_driver;
|
|
|
|
return 0;
|
|
|
|
exit_driver:
|
|
platform_driver_unregister(&pc87360_driver);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void __exit pc87360_exit(void)
|
|
{
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&pc87360_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
|
|
MODULE_DESCRIPTION("PC8736x hardware monitor");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(pc87360_init);
|
|
module_exit(pc87360_exit);
|