forked from luck/tmp_suning_uos_patched
204f47c5a5
- ide-dma.c is not a separate module - ide-dma.c is not PCI specific anymore - DMA is enabled by default nowadays - link for Intel Zappa BIOS is dead etc. v2: * Some comments should be preserved. (Noticed by Mark Lord) Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
962 lines
23 KiB
C
962 lines
23 KiB
C
/*
|
|
* IDE DMA support (including IDE PCI BM-DMA).
|
|
*
|
|
* Copyright (C) 1995-1998 Mark Lord
|
|
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
* DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
|
|
*/
|
|
|
|
/*
|
|
* Special Thanks to Mark for his Six years of work.
|
|
*/
|
|
|
|
/*
|
|
* Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for
|
|
* fixing the problem with the BIOS on some Acer motherboards.
|
|
*
|
|
* Thanks to "Benoit Poulot-Cazajous" <poulot@chorus.fr> for testing
|
|
* "TX" chipset compatibility and for providing patches for the "TX" chipset.
|
|
*
|
|
* Thanks to Christian Brunner <chb@muc.de> for taking a good first crack
|
|
* at generic DMA -- his patches were referred to when preparing this code.
|
|
*
|
|
* Most importantly, thanks to Robert Bringman <rob@mars.trion.com>
|
|
* for supplying a Promise UDMA board & WD UDMA drive for this work!
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
static const struct drive_list_entry drive_whitelist [] = {
|
|
|
|
{ "Micropolis 2112A" , NULL },
|
|
{ "CONNER CTMA 4000" , NULL },
|
|
{ "CONNER CTT8000-A" , NULL },
|
|
{ "ST34342A" , NULL },
|
|
{ NULL , NULL }
|
|
};
|
|
|
|
static const struct drive_list_entry drive_blacklist [] = {
|
|
|
|
{ "WDC AC11000H" , NULL },
|
|
{ "WDC AC22100H" , NULL },
|
|
{ "WDC AC32500H" , NULL },
|
|
{ "WDC AC33100H" , NULL },
|
|
{ "WDC AC31600H" , NULL },
|
|
{ "WDC AC32100H" , "24.09P07" },
|
|
{ "WDC AC23200L" , "21.10N21" },
|
|
{ "Compaq CRD-8241B" , NULL },
|
|
{ "CRD-8400B" , NULL },
|
|
{ "CRD-8480B", NULL },
|
|
{ "CRD-8482B", NULL },
|
|
{ "CRD-84" , NULL },
|
|
{ "SanDisk SDP3B" , NULL },
|
|
{ "SanDisk SDP3B-64" , NULL },
|
|
{ "SANYO CD-ROM CRD" , NULL },
|
|
{ "HITACHI CDR-8" , NULL },
|
|
{ "HITACHI CDR-8335" , NULL },
|
|
{ "HITACHI CDR-8435" , NULL },
|
|
{ "Toshiba CD-ROM XM-6202B" , NULL },
|
|
{ "TOSHIBA CD-ROM XM-1702BC", NULL },
|
|
{ "CD-532E-A" , NULL },
|
|
{ "E-IDE CD-ROM CR-840", NULL },
|
|
{ "CD-ROM Drive/F5A", NULL },
|
|
{ "WPI CDD-820", NULL },
|
|
{ "SAMSUNG CD-ROM SC-148C", NULL },
|
|
{ "SAMSUNG CD-ROM SC", NULL },
|
|
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM", NULL },
|
|
{ "_NEC DV5800A", NULL },
|
|
{ "SAMSUNG CD-ROM SN-124", "N001" },
|
|
{ "Seagate STT20000A", NULL },
|
|
{ "CD-ROM CDR_U200", "1.09" },
|
|
{ NULL , NULL }
|
|
|
|
};
|
|
|
|
/**
|
|
* ide_dma_intr - IDE DMA interrupt handler
|
|
* @drive: the drive the interrupt is for
|
|
*
|
|
* Handle an interrupt completing a read/write DMA transfer on an
|
|
* IDE device
|
|
*/
|
|
|
|
ide_startstop_t ide_dma_intr (ide_drive_t *drive)
|
|
{
|
|
u8 stat = 0, dma_stat = 0;
|
|
|
|
dma_stat = HWIF(drive)->ide_dma_end(drive);
|
|
stat = ide_read_status(drive);
|
|
|
|
if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
|
|
if (!dma_stat) {
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
|
|
task_end_request(drive, rq, stat);
|
|
return ide_stopped;
|
|
}
|
|
printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
|
|
drive->name, dma_stat);
|
|
}
|
|
return ide_error(drive, "dma_intr", stat);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_dma_intr);
|
|
|
|
static int ide_dma_good_drive(ide_drive_t *drive)
|
|
{
|
|
return ide_in_drive_list(drive->id, drive_whitelist);
|
|
}
|
|
|
|
/**
|
|
* ide_build_sglist - map IDE scatter gather for DMA I/O
|
|
* @drive: the drive to build the DMA table for
|
|
* @rq: the request holding the sg list
|
|
*
|
|
* Perform the DMA mapping magic necessary to access the source or
|
|
* target buffers of a request via DMA. The lower layers of the
|
|
* kernel provide the necessary cache management so that we can
|
|
* operate in a portable fashion.
|
|
*/
|
|
|
|
int ide_build_sglist(ide_drive_t *drive, struct request *rq)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct scatterlist *sg = hwif->sg_table;
|
|
|
|
ide_map_sg(drive, rq);
|
|
|
|
if (rq_data_dir(rq) == READ)
|
|
hwif->sg_dma_direction = DMA_FROM_DEVICE;
|
|
else
|
|
hwif->sg_dma_direction = DMA_TO_DEVICE;
|
|
|
|
return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
|
|
hwif->sg_dma_direction);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_build_sglist);
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
|
|
/**
|
|
* ide_build_dmatable - build IDE DMA table
|
|
*
|
|
* ide_build_dmatable() prepares a dma request. We map the command
|
|
* to get the pci bus addresses of the buffers and then build up
|
|
* the PRD table that the IDE layer wants to be fed. The code
|
|
* knows about the 64K wrap bug in the CS5530.
|
|
*
|
|
* Returns the number of built PRD entries if all went okay,
|
|
* returns 0 otherwise.
|
|
*
|
|
* May also be invoked from trm290.c
|
|
*/
|
|
|
|
int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned int *table = hwif->dmatable_cpu;
|
|
unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0;
|
|
unsigned int count = 0;
|
|
int i;
|
|
struct scatterlist *sg;
|
|
|
|
hwif->sg_nents = i = ide_build_sglist(drive, rq);
|
|
|
|
if (!i)
|
|
return 0;
|
|
|
|
sg = hwif->sg_table;
|
|
while (i) {
|
|
u32 cur_addr;
|
|
u32 cur_len;
|
|
|
|
cur_addr = sg_dma_address(sg);
|
|
cur_len = sg_dma_len(sg);
|
|
|
|
/*
|
|
* Fill in the dma table, without crossing any 64kB boundaries.
|
|
* Most hardware requires 16-bit alignment of all blocks,
|
|
* but the trm290 requires 32-bit alignment.
|
|
*/
|
|
|
|
while (cur_len) {
|
|
if (count++ >= PRD_ENTRIES) {
|
|
printk(KERN_ERR "%s: DMA table too small\n", drive->name);
|
|
goto use_pio_instead;
|
|
} else {
|
|
u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff);
|
|
|
|
if (bcount > cur_len)
|
|
bcount = cur_len;
|
|
*table++ = cpu_to_le32(cur_addr);
|
|
xcount = bcount & 0xffff;
|
|
if (is_trm290)
|
|
xcount = ((xcount >> 2) - 1) << 16;
|
|
if (xcount == 0x0000) {
|
|
/*
|
|
* Most chipsets correctly interpret a length of 0x0000 as 64KB,
|
|
* but at least one (e.g. CS5530) misinterprets it as zero (!).
|
|
* So here we break the 64KB entry into two 32KB entries instead.
|
|
*/
|
|
if (count++ >= PRD_ENTRIES) {
|
|
printk(KERN_ERR "%s: DMA table too small\n", drive->name);
|
|
goto use_pio_instead;
|
|
}
|
|
*table++ = cpu_to_le32(0x8000);
|
|
*table++ = cpu_to_le32(cur_addr + 0x8000);
|
|
xcount = 0x8000;
|
|
}
|
|
*table++ = cpu_to_le32(xcount);
|
|
cur_addr += bcount;
|
|
cur_len -= bcount;
|
|
}
|
|
}
|
|
|
|
sg = sg_next(sg);
|
|
i--;
|
|
}
|
|
|
|
if (count) {
|
|
if (!is_trm290)
|
|
*--table |= cpu_to_le32(0x80000000);
|
|
return count;
|
|
}
|
|
|
|
printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
|
|
|
|
use_pio_instead:
|
|
ide_destroy_dmatable(drive);
|
|
|
|
return 0; /* revert to PIO for this request */
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_build_dmatable);
|
|
#endif
|
|
|
|
/**
|
|
* ide_destroy_dmatable - clean up DMA mapping
|
|
* @drive: The drive to unmap
|
|
*
|
|
* Teardown mappings after DMA has completed. This must be called
|
|
* after the completion of each use of ide_build_dmatable and before
|
|
* the next use of ide_build_dmatable. Failure to do so will cause
|
|
* an oops as only one mapping can be live for each target at a given
|
|
* time.
|
|
*/
|
|
|
|
void ide_destroy_dmatable (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
|
|
dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
|
|
hwif->sg_dma_direction);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
|
|
/**
|
|
* config_drive_for_dma - attempt to activate IDE DMA
|
|
* @drive: the drive to place in DMA mode
|
|
*
|
|
* If the drive supports at least mode 2 DMA or UDMA of any kind
|
|
* then attempt to place it into DMA mode. Drives that are known to
|
|
* support DMA but predate the DMA properties or that are known
|
|
* to have DMA handling bugs are also set up appropriately based
|
|
* on the good/bad drive lists.
|
|
*/
|
|
|
|
static int config_drive_for_dma (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
if (drive->media != ide_disk) {
|
|
if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Enable DMA on any drive that has
|
|
* UltraDMA (mode 0/1/2/3/4/5/6) enabled
|
|
*/
|
|
if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f))
|
|
return 1;
|
|
|
|
/*
|
|
* Enable DMA on any drive that has mode2 DMA
|
|
* (multi or single) enabled
|
|
*/
|
|
if (id->field_valid & 2) /* regular DMA */
|
|
if ((id->dma_mword & 0x404) == 0x404 ||
|
|
(id->dma_1word & 0x404) == 0x404)
|
|
return 1;
|
|
|
|
/* Consult the list of known "good" drives */
|
|
if (ide_dma_good_drive(drive))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* dma_timer_expiry - handle a DMA timeout
|
|
* @drive: Drive that timed out
|
|
*
|
|
* An IDE DMA transfer timed out. In the event of an error we ask
|
|
* the driver to resolve the problem, if a DMA transfer is still
|
|
* in progress we continue to wait (arguably we need to add a
|
|
* secondary 'I don't care what the drive thinks' timeout here)
|
|
* Finally if we have an interrupt we let it complete the I/O.
|
|
* But only one time - we clear expiry and if it's still not
|
|
* completed after WAIT_CMD, we error and retry in PIO.
|
|
* This can occur if an interrupt is lost or due to hang or bugs.
|
|
*/
|
|
|
|
static int dma_timer_expiry (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 dma_stat = hwif->INB(hwif->dma_status);
|
|
|
|
printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n",
|
|
drive->name, dma_stat);
|
|
|
|
if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
|
|
return WAIT_CMD;
|
|
|
|
HWGROUP(drive)->expiry = NULL; /* one free ride for now */
|
|
|
|
/* 1 dmaing, 2 error, 4 intr */
|
|
if (dma_stat & 2) /* ERROR */
|
|
return -1;
|
|
|
|
if (dma_stat & 1) /* DMAing */
|
|
return WAIT_CMD;
|
|
|
|
if (dma_stat & 4) /* Got an Interrupt */
|
|
return WAIT_CMD;
|
|
|
|
return 0; /* Status is unknown -- reset the bus */
|
|
}
|
|
|
|
/**
|
|
* ide_dma_host_set - Enable/disable DMA on a host
|
|
* @drive: drive to control
|
|
*
|
|
* Enable/disable DMA on an IDE controller following generic
|
|
* bus-mastering IDE controller behaviour.
|
|
*/
|
|
|
|
void ide_dma_host_set(ide_drive_t *drive, int on)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 unit = (drive->select.b.unit & 0x01);
|
|
u8 dma_stat = hwif->INB(hwif->dma_status);
|
|
|
|
if (on)
|
|
dma_stat |= (1 << (5 + unit));
|
|
else
|
|
dma_stat &= ~(1 << (5 + unit));
|
|
|
|
hwif->OUTB(dma_stat, hwif->dma_status);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_dma_host_set);
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
|
|
|
|
/**
|
|
* ide_dma_off_quietly - Generic DMA kill
|
|
* @drive: drive to control
|
|
*
|
|
* Turn off the current DMA on this IDE controller.
|
|
*/
|
|
|
|
void ide_dma_off_quietly(ide_drive_t *drive)
|
|
{
|
|
drive->using_dma = 0;
|
|
ide_toggle_bounce(drive, 0);
|
|
|
|
drive->hwif->dma_host_set(drive, 0);
|
|
}
|
|
|
|
EXPORT_SYMBOL(ide_dma_off_quietly);
|
|
|
|
/**
|
|
* ide_dma_off - disable DMA on a device
|
|
* @drive: drive to disable DMA on
|
|
*
|
|
* Disable IDE DMA for a device on this IDE controller.
|
|
* Inform the user that DMA has been disabled.
|
|
*/
|
|
|
|
void ide_dma_off(ide_drive_t *drive)
|
|
{
|
|
printk(KERN_INFO "%s: DMA disabled\n", drive->name);
|
|
ide_dma_off_quietly(drive);
|
|
}
|
|
|
|
EXPORT_SYMBOL(ide_dma_off);
|
|
|
|
/**
|
|
* ide_dma_on - Enable DMA on a device
|
|
* @drive: drive to enable DMA on
|
|
*
|
|
* Enable IDE DMA for a device on this IDE controller.
|
|
*/
|
|
|
|
void ide_dma_on(ide_drive_t *drive)
|
|
{
|
|
drive->using_dma = 1;
|
|
ide_toggle_bounce(drive, 1);
|
|
|
|
drive->hwif->dma_host_set(drive, 1);
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
|
|
/**
|
|
* ide_dma_setup - begin a DMA phase
|
|
* @drive: target device
|
|
*
|
|
* Build an IDE DMA PRD (IDE speak for scatter gather table)
|
|
* and then set up the DMA transfer registers for a device
|
|
* that follows generic IDE PCI DMA behaviour. Controllers can
|
|
* override this function if they need to
|
|
*
|
|
* Returns 0 on success. If a PIO fallback is required then 1
|
|
* is returned.
|
|
*/
|
|
|
|
int ide_dma_setup(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
unsigned int reading;
|
|
u8 dma_stat;
|
|
|
|
if (rq_data_dir(rq))
|
|
reading = 0;
|
|
else
|
|
reading = 1 << 3;
|
|
|
|
/* fall back to pio! */
|
|
if (!ide_build_dmatable(drive, rq)) {
|
|
ide_map_sg(drive, rq);
|
|
return 1;
|
|
}
|
|
|
|
/* PRD table */
|
|
if (hwif->mmio)
|
|
writel(hwif->dmatable_dma, (void __iomem *)hwif->dma_prdtable);
|
|
else
|
|
outl(hwif->dmatable_dma, hwif->dma_prdtable);
|
|
|
|
/* specify r/w */
|
|
hwif->OUTB(reading, hwif->dma_command);
|
|
|
|
/* read dma_status for INTR & ERROR flags */
|
|
dma_stat = hwif->INB(hwif->dma_status);
|
|
|
|
/* clear INTR & ERROR flags */
|
|
hwif->OUTB(dma_stat|6, hwif->dma_status);
|
|
drive->waiting_for_dma = 1;
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_dma_setup);
|
|
|
|
static void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
|
|
{
|
|
/* issue cmd to drive */
|
|
ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry);
|
|
}
|
|
|
|
void ide_dma_start(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 dma_cmd = hwif->INB(hwif->dma_command);
|
|
|
|
/* Note that this is done *after* the cmd has
|
|
* been issued to the drive, as per the BM-IDE spec.
|
|
* The Promise Ultra33 doesn't work correctly when
|
|
* we do this part before issuing the drive cmd.
|
|
*/
|
|
/* start DMA */
|
|
hwif->OUTB(dma_cmd|1, hwif->dma_command);
|
|
hwif->dma = 1;
|
|
wmb();
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_dma_start);
|
|
|
|
/* returns 1 on error, 0 otherwise */
|
|
int __ide_dma_end (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 dma_stat = 0, dma_cmd = 0;
|
|
|
|
drive->waiting_for_dma = 0;
|
|
/* get dma_command mode */
|
|
dma_cmd = hwif->INB(hwif->dma_command);
|
|
/* stop DMA */
|
|
hwif->OUTB(dma_cmd&~1, hwif->dma_command);
|
|
/* get DMA status */
|
|
dma_stat = hwif->INB(hwif->dma_status);
|
|
/* clear the INTR & ERROR bits */
|
|
hwif->OUTB(dma_stat|6, hwif->dma_status);
|
|
/* purge DMA mappings */
|
|
ide_destroy_dmatable(drive);
|
|
/* verify good DMA status */
|
|
hwif->dma = 0;
|
|
wmb();
|
|
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(__ide_dma_end);
|
|
|
|
/* returns 1 if dma irq issued, 0 otherwise */
|
|
static int __ide_dma_test_irq(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 dma_stat = hwif->INB(hwif->dma_status);
|
|
|
|
/* return 1 if INTR asserted */
|
|
if ((dma_stat & 4) == 4)
|
|
return 1;
|
|
if (!drive->waiting_for_dma)
|
|
printk(KERN_WARNING "%s: (%s) called while not waiting\n",
|
|
drive->name, __FUNCTION__);
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
|
|
|
|
int __ide_dma_bad_drive (ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
int blacklist = ide_in_drive_list(id, drive_blacklist);
|
|
if (blacklist) {
|
|
printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n",
|
|
drive->name, id->model);
|
|
return blacklist;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(__ide_dma_bad_drive);
|
|
|
|
static const u8 xfer_mode_bases[] = {
|
|
XFER_UDMA_0,
|
|
XFER_MW_DMA_0,
|
|
XFER_SW_DMA_0,
|
|
};
|
|
|
|
static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
unsigned int mask = 0;
|
|
|
|
switch(base) {
|
|
case XFER_UDMA_0:
|
|
if ((id->field_valid & 4) == 0)
|
|
break;
|
|
|
|
if (hwif->udma_filter)
|
|
mask = hwif->udma_filter(drive);
|
|
else
|
|
mask = hwif->ultra_mask;
|
|
mask &= id->dma_ultra;
|
|
|
|
/*
|
|
* avoid false cable warning from eighty_ninty_three()
|
|
*/
|
|
if (req_mode > XFER_UDMA_2) {
|
|
if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
|
|
mask &= 0x07;
|
|
}
|
|
break;
|
|
case XFER_MW_DMA_0:
|
|
if ((id->field_valid & 2) == 0)
|
|
break;
|
|
if (hwif->mdma_filter)
|
|
mask = hwif->mdma_filter(drive);
|
|
else
|
|
mask = hwif->mwdma_mask;
|
|
mask &= id->dma_mword;
|
|
break;
|
|
case XFER_SW_DMA_0:
|
|
if (id->field_valid & 2) {
|
|
mask = id->dma_1word & hwif->swdma_mask;
|
|
} else if (id->tDMA) {
|
|
/*
|
|
* ide_fix_driveid() doesn't convert ->tDMA to the
|
|
* CPU endianness so we need to do it here
|
|
*/
|
|
u8 mode = le16_to_cpu(id->tDMA);
|
|
|
|
/*
|
|
* if the mode is valid convert it to the mask
|
|
* (the maximum allowed mode is XFER_SW_DMA_2)
|
|
*/
|
|
if (mode <= 2)
|
|
mask = ((2 << mode) - 1) & hwif->swdma_mask;
|
|
}
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
return mask;
|
|
}
|
|
|
|
/**
|
|
* ide_find_dma_mode - compute DMA speed
|
|
* @drive: IDE device
|
|
* @req_mode: requested mode
|
|
*
|
|
* Checks the drive/host capabilities and finds the speed to use for
|
|
* the DMA transfer. The speed is then limited by the requested mode.
|
|
*
|
|
* Returns 0 if the drive/host combination is incapable of DMA transfers
|
|
* or if the requested mode is not a DMA mode.
|
|
*/
|
|
|
|
u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
unsigned int mask;
|
|
int x, i;
|
|
u8 mode = 0;
|
|
|
|
if (drive->media != ide_disk) {
|
|
if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) {
|
|
if (req_mode < xfer_mode_bases[i])
|
|
continue;
|
|
mask = ide_get_mode_mask(drive, xfer_mode_bases[i], req_mode);
|
|
x = fls(mask) - 1;
|
|
if (x >= 0) {
|
|
mode = xfer_mode_bases[i] + x;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (hwif->chipset == ide_acorn && mode == 0) {
|
|
/*
|
|
* is this correct?
|
|
*/
|
|
if (ide_dma_good_drive(drive) && drive->id->eide_dma_time < 150)
|
|
mode = XFER_MW_DMA_1;
|
|
}
|
|
|
|
mode = min(mode, req_mode);
|
|
|
|
printk(KERN_INFO "%s: %s mode selected\n", drive->name,
|
|
mode ? ide_xfer_verbose(mode) : "no DMA");
|
|
|
|
return mode;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_find_dma_mode);
|
|
|
|
static int ide_tune_dma(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 speed;
|
|
|
|
if (noautodma || drive->nodma || (drive->id->capability & 1) == 0)
|
|
return 0;
|
|
|
|
/* consult the list of known "bad" drives */
|
|
if (__ide_dma_bad_drive(drive))
|
|
return 0;
|
|
|
|
if (ide_id_dma_bug(drive))
|
|
return 0;
|
|
|
|
if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
|
|
return config_drive_for_dma(drive);
|
|
|
|
speed = ide_max_dma_mode(drive);
|
|
|
|
if (!speed) {
|
|
/* is this really correct/needed? */
|
|
if ((hwif->host_flags & IDE_HFLAG_CY82C693) &&
|
|
ide_dma_good_drive(drive))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
|
|
return 0;
|
|
|
|
if (ide_set_dma_mode(drive, speed))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int ide_dma_check(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
int vdma = (hwif->host_flags & IDE_HFLAG_VDMA)? 1 : 0;
|
|
|
|
if (!vdma && ide_tune_dma(drive))
|
|
return 0;
|
|
|
|
/* TODO: always do PIO fallback */
|
|
if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
|
|
return -1;
|
|
|
|
ide_set_max_pio(drive);
|
|
|
|
return vdma ? 0 : -1;
|
|
}
|
|
|
|
int ide_id_dma_bug(ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
if (id->field_valid & 4) {
|
|
if ((id->dma_ultra >> 8) && (id->dma_mword >> 8))
|
|
goto err_out;
|
|
} else if (id->field_valid & 2) {
|
|
if ((id->dma_mword >> 8) && (id->dma_1word >> 8))
|
|
goto err_out;
|
|
}
|
|
return 0;
|
|
err_out:
|
|
printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
|
|
return 1;
|
|
}
|
|
|
|
int ide_set_dma(ide_drive_t *drive)
|
|
{
|
|
int rc;
|
|
|
|
/*
|
|
* Force DMAing for the beginning of the check.
|
|
* Some chipsets appear to do interesting
|
|
* things, if not checked and cleared.
|
|
* PARANOIA!!!
|
|
*/
|
|
ide_dma_off_quietly(drive);
|
|
|
|
rc = ide_dma_check(drive);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ide_dma_on(drive);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ide_check_dma_crc(ide_drive_t *drive)
|
|
{
|
|
u8 mode;
|
|
|
|
ide_dma_off_quietly(drive);
|
|
drive->crc_count = 0;
|
|
mode = drive->current_speed;
|
|
/*
|
|
* Don't try non Ultra-DMA modes without iCRC's. Force the
|
|
* device to PIO and make the user enable SWDMA/MWDMA modes.
|
|
*/
|
|
if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
|
|
mode--;
|
|
else
|
|
mode = XFER_PIO_4;
|
|
ide_set_xfer_rate(drive, mode);
|
|
if (drive->current_speed >= XFER_SW_DMA_0)
|
|
ide_dma_on(drive);
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
|
|
void ide_dma_lost_irq (ide_drive_t *drive)
|
|
{
|
|
printk("%s: DMA interrupt recovery\n", drive->name);
|
|
}
|
|
|
|
EXPORT_SYMBOL(ide_dma_lost_irq);
|
|
|
|
void ide_dma_timeout (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
|
|
printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);
|
|
|
|
if (hwif->ide_dma_test_irq(drive))
|
|
return;
|
|
|
|
hwif->ide_dma_end(drive);
|
|
}
|
|
|
|
EXPORT_SYMBOL(ide_dma_timeout);
|
|
|
|
static void ide_release_dma_engine(ide_hwif_t *hwif)
|
|
{
|
|
if (hwif->dmatable_cpu) {
|
|
struct pci_dev *pdev = to_pci_dev(hwif->dev);
|
|
|
|
pci_free_consistent(pdev, PRD_ENTRIES * PRD_BYTES,
|
|
hwif->dmatable_cpu, hwif->dmatable_dma);
|
|
hwif->dmatable_cpu = NULL;
|
|
}
|
|
}
|
|
|
|
static int ide_release_iomio_dma(ide_hwif_t *hwif)
|
|
{
|
|
release_region(hwif->dma_base, 8);
|
|
if (hwif->extra_ports)
|
|
release_region(hwif->extra_base, hwif->extra_ports);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Needed for allowing full modular support of ide-driver
|
|
*/
|
|
int ide_release_dma(ide_hwif_t *hwif)
|
|
{
|
|
ide_release_dma_engine(hwif);
|
|
|
|
if (hwif->mmio)
|
|
return 1;
|
|
else
|
|
return ide_release_iomio_dma(hwif);
|
|
}
|
|
|
|
static int ide_allocate_dma_engine(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(hwif->dev);
|
|
|
|
hwif->dmatable_cpu = pci_alloc_consistent(pdev,
|
|
PRD_ENTRIES * PRD_BYTES,
|
|
&hwif->dmatable_dma);
|
|
|
|
if (hwif->dmatable_cpu)
|
|
return 0;
|
|
|
|
printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n",
|
|
hwif->cds->name);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base)
|
|
{
|
|
printk(KERN_INFO " %s: MMIO-DMA ", hwif->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base)
|
|
{
|
|
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
|
|
hwif->name, base, base + 7);
|
|
|
|
if (!request_region(base, 8, hwif->name)) {
|
|
printk(" -- Error, ports in use.\n");
|
|
return 1;
|
|
}
|
|
|
|
if (hwif->cds->extra) {
|
|
hwif->extra_base = base + (hwif->channel ? 8 : 16);
|
|
|
|
if (!hwif->mate || !hwif->mate->extra_ports) {
|
|
if (!request_region(hwif->extra_base,
|
|
hwif->cds->extra, hwif->cds->name)) {
|
|
printk(" -- Error, extra ports in use.\n");
|
|
release_region(base, 8);
|
|
return 1;
|
|
}
|
|
hwif->extra_ports = hwif->cds->extra;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base)
|
|
{
|
|
if (hwif->mmio)
|
|
return ide_mapped_mmio_dma(hwif, base);
|
|
|
|
return ide_iomio_dma(hwif, base);
|
|
}
|
|
|
|
void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
|
|
{
|
|
u8 dma_stat;
|
|
|
|
if (ide_dma_iobase(hwif, base))
|
|
return;
|
|
|
|
if (ide_allocate_dma_engine(hwif)) {
|
|
ide_release_dma(hwif);
|
|
return;
|
|
}
|
|
|
|
hwif->dma_base = base;
|
|
|
|
if (!hwif->dma_command)
|
|
hwif->dma_command = hwif->dma_base + 0;
|
|
if (!hwif->dma_vendor1)
|
|
hwif->dma_vendor1 = hwif->dma_base + 1;
|
|
if (!hwif->dma_status)
|
|
hwif->dma_status = hwif->dma_base + 2;
|
|
if (!hwif->dma_vendor3)
|
|
hwif->dma_vendor3 = hwif->dma_base + 3;
|
|
if (!hwif->dma_prdtable)
|
|
hwif->dma_prdtable = hwif->dma_base + 4;
|
|
|
|
if (!hwif->dma_host_set)
|
|
hwif->dma_host_set = &ide_dma_host_set;
|
|
if (!hwif->dma_setup)
|
|
hwif->dma_setup = &ide_dma_setup;
|
|
if (!hwif->dma_exec_cmd)
|
|
hwif->dma_exec_cmd = &ide_dma_exec_cmd;
|
|
if (!hwif->dma_start)
|
|
hwif->dma_start = &ide_dma_start;
|
|
if (!hwif->ide_dma_end)
|
|
hwif->ide_dma_end = &__ide_dma_end;
|
|
if (!hwif->ide_dma_test_irq)
|
|
hwif->ide_dma_test_irq = &__ide_dma_test_irq;
|
|
if (!hwif->dma_timeout)
|
|
hwif->dma_timeout = &ide_dma_timeout;
|
|
if (!hwif->dma_lost_irq)
|
|
hwif->dma_lost_irq = &ide_dma_lost_irq;
|
|
|
|
dma_stat = hwif->INB(hwif->dma_status);
|
|
printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n",
|
|
hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO",
|
|
hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO");
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_setup_dma);
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
|