kernel_optimize_test/arch/arm/mach-imx/mm-imx3.c
Linus Torvalds fb2af0020a Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "This contains the usual updates from other people (listed below) and
  the usual random muddle of miscellaneous ARM updates which cover some
  low priority bug fixes and performance improvements.

  I've started to put the pull request wording into the merge commits,
  which are:

   - NoMMU stuff:

     This includes the following series sent earlier to the list:
      - nommu-fixes
      - R7 Support
      - MPU support

     I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
     were discussing today until we've reached a conclusion/that's had
     some more review.

     This is rebased (and re-tested) on your devel-stable branch because
     otherwise there were going to be conflicts with Uwe's V7M work now
     that you've merged that.  I've included the fix for limiting MPU to
     CPU_V7.

   - Huge page support

     These changes bring both HugeTLB support and Transparent HugePage
     (THP) support to ARM.  Only long descriptors (LPAE) are supported
     in this series.

     The code has been tested on an Arndale board (Exynos 5250).

   - LPAE updates

     Please pull these miscellaneous LPAE fixes I've been collecting for
     a while now for 3.11.  They've been tested and reviewed by quite a
     few people, and most of the patches are pretty trivial.  -- Will Deacon.

   - arch_timer cleanups

     Please pull these arch_timer cleanups I've been holding onto for a
     while.  They're the same as my last posting, but have been rebased
     to v3.10-rc3.

   - mpidr linearisation (multiprocessor id register - identifies which
     CPU number we are in the system)

     This patch series that implements MPIDR linearization through a
     simple hashing algorithm and updates current cpu_{suspend}/{resume}
     code to use the newly created hash structures to retrieve context
     pointers.  It represents a stepping stone for the implementation of
     power management code on forthcoming multi-cluster ARM systems.

     It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
     OMAP4 and Tegra, with processors hitting low-power states requiring
     warm-boot resume through the cpu_resume code path"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
  ARM: 7777/1: Avoid extra calls to the C compiler
  ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
  ARM: 7770/1: remove residual ARMv2 support from decompressor
  ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
  ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
  ARM: 7767/1: let the ASID allocator handle suspended animation
  ARM: 7766/1: versatile: don't mark pen as __INIT
  ARM: 7765/1: perf: Record the user-mode PC in the call chain.
  ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
  ARM: kernel: implement stack pointer save array through MPIDR hashing
  ARM: kernel: build MPIDR hash function data structure
  ARM: mpu: Ensure that MPU depends on CPU_V7
  ARM: mpu: protect the vectors page with an MPU region
  ARM: mpu: Allow enabling of the MPU via kconfig
  ARM: 7758/1: introduce config HAS_BANDGAP
  ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
  ARM: 7751/1: zImage: don't overwrite ourself with a page table
  ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
  ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
  ...
2013-07-03 09:46:29 -07:00

299 lines
8.3 KiB
C

/*
* Copyright (C) 1999,2000 Arm Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* - add MX31 specific definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/pinctrl/machine.h>
#include <asm/pgtable.h>
#include <asm/system_misc.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include "common.h"
#include "crmregs-imx3.h"
#include "devices/devices-common.h"
#include "hardware.h"
#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
static void imx3_idle(void)
{
unsigned long reg = 0;
mx3_cpu_lp_set(MX3_WAIT);
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"bic %0, %0, #0x00001000\n"
"bic %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
/* invalidate I cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c5, 0\n"
/* clear and invalidate D cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c14, 0\n"
/* WFI */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c0, 4\n"
"nop\n" "nop\n" "nop\n" "nop\n"
"nop\n" "nop\n" "nop\n"
/* enable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"orr %0, %0, #0x00001000\n"
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
}
static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
if (mtype == MT_DEVICE) {
/*
* Access all peripherals below 0x80000000 as nonshared device
* on mx3, but leave l2cc alone. Otherwise cache corruptions
* can occur.
*/
if (phys_addr < 0x80000000 &&
!addr_in_module(phys_addr, MX3x_L2CC))
mtype = MT_DEVICE_NONSHARED;
}
return __arm_ioremap_caller(phys_addr, size, mtype, caller);
}
static void __init imx3_init_l2x0(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
/*
* First of all, we must repair broken chip settings. There are some
* i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
* misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
* Workaraound is to setup the correct register setting prior enabling the
* L2 cache. This should not hurt already working CPUs, as they are using the
* same value.
*/
#define L2_MEM_VAL 0x10
clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
if (clkctl_base != NULL) {
writel(0x00000515, clkctl_base + L2_MEM_VAL);
iounmap(clkctl_base);
} else {
pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
}
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
if (!l2x0_base) {
printk(KERN_ERR "remapping L2 cache area failed\n");
return;
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
#endif
}
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx31_map_io(void)
{
iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx3_idle;
mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
}
void __init mx31_init_irq(void)
{
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
.per_2_per_addr = 1677,
};
static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
.ap_2_ap_addr = 423,
.ap_2_bp_addr = 829,
.bp_2_ap_addr = 1029,
};
static struct sdma_platform_data imx31_sdma_pdata __initdata = {
.fw_name = "sdma-imx31-to2.bin",
.script_addrs = &imx31_to2_sdma_script,
};
static const struct resource imx31_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
};
void __init imx31_soc_init(void)
{
int to_version = mx31_revision() >> 4;
imx3_init_l2x0();
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
}
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
ARRAY_SIZE(imx31_audmux_res));
}
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
arm_pm_idle = imx3_idle;
arch_ioremap_caller = imx3_ioremap_caller;
mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
.uartsh_2_mcu_addr = 1183,
.per_2_shp_addr = 1033,
.mcu_2_shp_addr = 961,
.ata_2_mcu_addr = 1333,
.mcu_2_ata_addr = 1252,
.app_2_mcu_addr = 683,
.shp_2_per_addr = 1111,
.shp_2_mcu_addr = 892,
};
static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
.ap_2_ap_addr = 729,
.uart_2_mcu_addr = 904,
.per_2_app_addr = 1597,
.mcu_2_app_addr = 834,
.uartsh_2_mcu_addr = 1270,
.per_2_shp_addr = 1120,
.mcu_2_shp_addr = 1048,
.ata_2_mcu_addr = 1429,
.mcu_2_ata_addr = 1339,
.app_2_per_addr = 1531,
.app_2_mcu_addr = 770,
.shp_2_per_addr = 1198,
.shp_2_mcu_addr = 979,
};
static struct sdma_platform_data imx35_sdma_pdata __initdata = {
.fw_name = "sdma-imx35-to2.bin",
.script_addrs = &imx35_to2_sdma_script,
};
static const struct resource imx35_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
};
void __init imx35_soc_init(void)
{
int to_version = mx35_revision() >> 4;
imx3_init_l2x0();
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
strlen(imx35_sdma_pdata.fw_name));
imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
}
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
/* Setup AIPS registers */
imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
/* i.mx35 has the i.mx31 type audmux */
platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
ARRAY_SIZE(imx35_audmux_res));
}
#endif /* ifdef CONFIG_SOC_IMX35 */