forked from luck/tmp_suning_uos_patched
27487d4471
- Moved MSP_SET_MATRIX to v4l2-common.h - Fix typos and integer overflows in tea5767.c - Split old freq field into a tv_freq and a radio_freq. Prevents that a radio tuner is initialized with a tv frequency or vice versa. - When switching to radio mode initialize the tuner with the last used radio frequency (this was already done for the TV mode). As a result of these changes the tuner module now remembers the last set radio and TV frequencies, which is what you would expect to happen. - Move out of range frequencies to the closest valid frequency as per v4l2 API spec. - Fix incorrect initial radio frequency (multiplier is 16000, not 16) - Add boundary check for out of range frequencies. - Use new flag to check if the order of the CB and freq. depends on the last set frequency. That is needed for some tuners or you can get static as a result. The flag is added for those tuners where I know that the datasheet indicates that this is necessary. - For this new check use the last set div value, not the last frequency as radio frequencies are always much higher due to the 16000 multiplier. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
184 lines
7.0 KiB
C
184 lines
7.0 KiB
C
/*
|
|
v4l2 common internal API header
|
|
|
|
This header contains internal shared ioctl definitions for use by the
|
|
internal low-level v4l2 drivers.
|
|
Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
|
|
define,
|
|
|
|
Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef V4L2_COMMON_H_
|
|
#define V4L2_COMMON_H_
|
|
|
|
/* v4l debugging and diagnostics */
|
|
|
|
/* Common printk constucts for v4l-i2c drivers. These macros create a unique
|
|
prefix consisting of the driver name, the adapter number and the i2c
|
|
address. */
|
|
#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
|
|
printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
|
|
|
|
#define v4l_client_printk(level, client, fmt, arg...) \
|
|
v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \
|
|
(client)->addr, fmt , ## arg)
|
|
|
|
#define v4l_err(client, fmt, arg...) \
|
|
v4l_client_printk(KERN_ERR, client, fmt , ## arg)
|
|
|
|
#define v4l_warn(client, fmt, arg...) \
|
|
v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
|
|
|
|
#define v4l_info(client, fmt, arg...) \
|
|
v4l_client_printk(KERN_INFO, client, fmt , ## arg)
|
|
|
|
/* These three macros assume that the debug level is set with a module
|
|
parameter called 'debug'. */
|
|
#define v4l_dbg(level, debug, client, fmt, arg...) \
|
|
do { \
|
|
if (debug >= (level)) \
|
|
v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
|
|
} while (0)
|
|
|
|
/* Prints the ioctl in a human-readable format */
|
|
extern void v4l_printk_ioctl(unsigned int cmd);
|
|
|
|
/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
|
|
#define v4l_print_ioctl(name, cmd) \
|
|
do { \
|
|
printk(KERN_DEBUG "%s: ", name); \
|
|
v4l_printk_ioctl(cmd); \
|
|
} while (0)
|
|
|
|
/* Use this macro in I2C drivers where 'client' is the struct i2c_client
|
|
pointer */
|
|
#define v4l_i2c_print_ioctl(client, cmd) \
|
|
do { \
|
|
v4l_client_printk(KERN_DEBUG, client, ""); \
|
|
v4l_printk_ioctl(cmd); \
|
|
} while (0)
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* Internal ioctls */
|
|
|
|
/* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */
|
|
struct v4l2_register {
|
|
u32 i2c_id; /* I2C driver ID of the I2C chip. 0 for the I2C adapter. */
|
|
unsigned long reg;
|
|
u32 val;
|
|
};
|
|
|
|
/* VIDIOC_INT_DECODE_VBI_LINE */
|
|
struct v4l2_decode_vbi_line {
|
|
u32 is_second_field; /* Set to 0 for the first (odd) field,
|
|
set to 1 for the second (even) field. */
|
|
u8 *p; /* Pointer to the sliced VBI data from the decoder.
|
|
On exit points to the start of the payload. */
|
|
u32 line; /* Line number of the sliced VBI data (1-23) */
|
|
u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */
|
|
};
|
|
|
|
/* VIDIOC_INT_G_CHIP_IDENT: identifies the actual chip installed on the board */
|
|
enum v4l2_chip_ident {
|
|
/* general idents: reserved range 0-49 */
|
|
V4L2_IDENT_UNKNOWN = 0,
|
|
|
|
/* module saa7115: reserved range 100-149 */
|
|
V4L2_IDENT_SAA7114 = 104,
|
|
V4L2_IDENT_SAA7115 = 105,
|
|
|
|
/* module saa7127: reserved range 150-199 */
|
|
V4L2_IDENT_SAA7127 = 157,
|
|
V4L2_IDENT_SAA7129 = 159,
|
|
|
|
/* module cx25840: reserved range 200-249 */
|
|
V4L2_IDENT_CX25840 = 240,
|
|
V4L2_IDENT_CX25841 = 241,
|
|
V4L2_IDENT_CX25842 = 242,
|
|
V4L2_IDENT_CX25843 = 243,
|
|
};
|
|
|
|
/* audio ioctls */
|
|
/* v4l device was opened in Radio mode */
|
|
#define AUDC_SET_RADIO _IO('d',88)
|
|
/* select from TV,radio,extern,MUTE */
|
|
#define AUDC_SET_INPUT _IOW('d',89,int)
|
|
|
|
/* msp3400 ioctl: will be removed in the near future */
|
|
struct msp_matrix {
|
|
int input;
|
|
int output;
|
|
};
|
|
#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix)
|
|
|
|
/* tuner ioctls */
|
|
/* Sets tuner type and its I2C addr */
|
|
#define TUNER_SET_TYPE_ADDR _IOW('d',90,int)
|
|
/* Puts tuner on powersaving state, disabling it, except for i2c */
|
|
#define TUNER_SET_STANDBY _IOW('d',91,int)
|
|
/* Sets tda9887 specific stuff, like port1, port2 and qss */
|
|
#define TDA9887_SET_CONFIG _IOW('d',92,int)
|
|
|
|
/* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
|
|
#define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register)
|
|
#define VIDIOC_INT_G_REGISTER _IOWR('d', 101, struct v4l2_register)
|
|
|
|
/* Reset the I2C chip */
|
|
#define VIDIOC_INT_RESET _IO ('d', 102)
|
|
|
|
/* Set the frequency (in Hz) of the audio clock output.
|
|
Used to slave an audio processor to the video decoder, ensuring that audio
|
|
and video remain synchronized.
|
|
Usual values for the frequency are 48000, 44100 or 32000 Hz.
|
|
If the frequency is not supported, then -EINVAL is returned. */
|
|
#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOW ('d', 103, u32)
|
|
|
|
/* Video decoders that support sliced VBI need to implement this ioctl.
|
|
Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI
|
|
data that was generated by the decoder. The driver then parses the sliced
|
|
VBI data and sets the other fields in the struct accordingly. The pointer p
|
|
is updated to point to the start of the payload which can be copied
|
|
verbatim into the data field of the v4l2_sliced_vbi_data struct. If no
|
|
valid VBI data was found, then the type field is set to 0 on return. */
|
|
#define VIDIOC_INT_DECODE_VBI_LINE _IOWR('d', 104, struct v4l2_decode_vbi_line)
|
|
|
|
/* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is
|
|
filled with the data packets that should be output. Note that if you set
|
|
the line field to 0, then that VBI signal is disabled. */
|
|
#define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data)
|
|
|
|
/* Used to obtain the sliced VBI packet from a readback register. Not all
|
|
video decoders support this. If no data is available because the readback
|
|
register contains invalid or erroneous data -EIO is returned. Note that
|
|
you must fill in the 'id' member and the 'field' member (to determine
|
|
whether CC data from the first or second field should be obtained). */
|
|
#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data *)
|
|
|
|
/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can
|
|
be made. */
|
|
#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident *)
|
|
|
|
/* Sets I2S speed in bps. This is used to provide a standard way to select I2S
|
|
clock used by driving digital audio streams at some board designs.
|
|
Usual values for the frequency are 1024000 and 2048000.
|
|
If the frequency is not supported, then -EINVAL is returned. */
|
|
#define VIDIOC_INT_I2S_CLOCK_FREQ _IOW ('d', 108, u32)
|
|
|
|
#endif /* V4L2_COMMON_H_ */
|