forked from luck/tmp_suning_uos_patched
bde18a2e1e
This is the patch (based on 2.6.19-rc4) for PATA controller of
Toshiba Cell reference set(Celleb). The reference set consists
of Cell, 512MB memory, Super Companion Chip(SCC) and some
peripherals such as HDD, GbE, etc. You can see brief explanation
and picture of Cell reference set at following URLs.
http://www.toshiba.co.jp/about/press/2005_09/pr2001.htm
http://cell-industries.com/toshiba_announces.php
We use a drivers/ide driver because its design is more suitable for
SCC IDE controller than libata driver. Since SCC supports only 32bit
read/write, we must override many callbacks of ata_port_operations
by modifying generic helpers. Each time the libata common code is
updated, we must update those modified helpers. It is very hard for us.
But we will try to implement the libata driver as needed.
Signed-off-by: Kou Ishizaki <kou.ishizaki at toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi at toshiba.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
56 lines
1.9 KiB
Makefile
56 lines
1.9 KiB
Makefile
#
|
|
# Makefile for the kernel ata, atapi, and ide block device drivers.
|
|
#
|
|
# 12 September 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
# Note : at this point, these files are compiled on all systems.
|
|
# In the future, some of these should be built conditionally.
|
|
#
|
|
# First come modules that register themselves with the core
|
|
|
|
EXTRA_CFLAGS += -Idrivers/ide
|
|
|
|
obj-$(CONFIG_BLK_DEV_IDE) += pci/
|
|
|
|
ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o
|
|
|
|
ide-core-$(CONFIG_BLK_DEV_CMD640) += pci/cmd640.o
|
|
|
|
# Core IDE code - must come before legacy
|
|
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
|
|
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
|
|
ide-core-$(CONFIG_PROC_FS) += ide-proc.o
|
|
ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
|
|
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
|
|
|
|
# built-in only drivers from arm/
|
|
ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o
|
|
|
|
# built-in only drivers from legacy/
|
|
ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o
|
|
ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o
|
|
ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o
|
|
ide-core-$(CONFIG_BLK_DEV_MAC_IDE) += legacy/macide.o
|
|
ide-core-$(CONFIG_BLK_DEV_Q40IDE) += legacy/q40ide.o
|
|
|
|
# built-in only drivers from ppc/
|
|
ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
|
|
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
|
|
ide-core-$(CONFIG_BLK_DEV_IDE_CELLEB) += ppc/scc_pata.o
|
|
|
|
# built-in only drivers from h8300/
|
|
ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
|
|
|
|
obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
|
|
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
|
|
|
|
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
|
|
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
|
|
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
|
|
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
|
|
|
|
obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/
|
|
obj-$(CONFIG_BLK_DEV_HD) += legacy/
|
|
obj-$(CONFIG_ETRAX_IDE) += cris/
|