forked from luck/tmp_suning_uos_patched
23af51ecfb
The M29W128G Numonyx flash devices are intolerant to any 0xFF command: in the Cfi_util.c the function cfi_qry_mode_off() (that resets the device after the autoselect mode) must have a 0xF0 command after the 0xFF command. This fix solves also the cause of the fixup_M29W128G_write_buffer() fix, that can be removed now. The following patch applies to 2.6.30 kernel. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Acked-by: Alexey Korolev <akorolev@infradead.org> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
246 lines
6.0 KiB
C
Executable File
246 lines
6.0 KiB
C
Executable File
/*
|
|
* Common Flash Interface support:
|
|
* Generic utility functions not dependant on command set
|
|
*
|
|
* Copyright (C) 2002 Red Hat
|
|
* Copyright (C) 2003 STMicroelectronics Limited
|
|
*
|
|
* This code is covered by the GPL.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mtd/xip.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/cfi.h>
|
|
#include <linux/mtd/compatmac.h>
|
|
|
|
int __xipram cfi_qry_present(struct map_info *map, __u32 base,
|
|
struct cfi_private *cfi)
|
|
{
|
|
int osf = cfi->interleave * cfi->device_type; /* scale factor */
|
|
map_word val[3];
|
|
map_word qry[3];
|
|
|
|
qry[0] = cfi_build_cmd('Q', map, cfi);
|
|
qry[1] = cfi_build_cmd('R', map, cfi);
|
|
qry[2] = cfi_build_cmd('Y', map, cfi);
|
|
|
|
val[0] = map_read(map, base + osf*0x10);
|
|
val[1] = map_read(map, base + osf*0x11);
|
|
val[2] = map_read(map, base + osf*0x12);
|
|
|
|
if (!map_word_equal(map, qry[0], val[0]))
|
|
return 0;
|
|
|
|
if (!map_word_equal(map, qry[1], val[1]))
|
|
return 0;
|
|
|
|
if (!map_word_equal(map, qry[2], val[2]))
|
|
return 0;
|
|
|
|
return 1; /* "QRY" found */
|
|
}
|
|
EXPORT_SYMBOL_GPL(cfi_qry_present);
|
|
|
|
int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
|
|
struct cfi_private *cfi)
|
|
{
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
|
|
if (cfi_qry_present(map, base, cfi))
|
|
return 1;
|
|
/* QRY not found probably we deal with some odd CFI chips */
|
|
/* Some revisions of some old Intel chips? */
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
|
|
if (cfi_qry_present(map, base, cfi))
|
|
return 1;
|
|
/* ST M29DW chips */
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
|
|
if (cfi_qry_present(map, base, cfi))
|
|
return 1;
|
|
/* QRY not found */
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cfi_qry_mode_on);
|
|
|
|
void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
|
|
struct cfi_private *cfi)
|
|
{
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
|
/* M29W128G flashes require an additional reset command
|
|
when exit qry mode */
|
|
if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
|
|
|
|
struct cfi_extquery *
|
|
__xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
|
|
{
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
__u32 base = 0; // cfi->chips[0].start;
|
|
int ofs_factor = cfi->interleave * cfi->device_type;
|
|
int i;
|
|
struct cfi_extquery *extp = NULL;
|
|
|
|
printk(" %s Extended Query Table at 0x%4.4X\n", name, adr);
|
|
if (!adr)
|
|
goto out;
|
|
|
|
extp = kmalloc(size, GFP_KERNEL);
|
|
if (!extp) {
|
|
printk(KERN_ERR "Failed to allocate memory\n");
|
|
goto out;
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_XIP
|
|
local_irq_disable();
|
|
#endif
|
|
|
|
/* Switch it into Query Mode */
|
|
cfi_qry_mode_on(base, map, cfi);
|
|
/* Read in the Extended Query Table */
|
|
for (i=0; i<size; i++) {
|
|
((unsigned char *)extp)[i] =
|
|
cfi_read_query(map, base+((adr+i)*ofs_factor));
|
|
}
|
|
|
|
/* Make sure it returns to read mode */
|
|
cfi_qry_mode_off(base, map, cfi);
|
|
|
|
#ifdef CONFIG_MTD_XIP
|
|
(void) map_read(map, base);
|
|
xip_iprefetch();
|
|
local_irq_enable();
|
|
#endif
|
|
|
|
out: return extp;
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfi_read_pri);
|
|
|
|
void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
|
|
{
|
|
struct map_info *map = mtd->priv;
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
struct cfi_fixup *f;
|
|
|
|
for (f=fixups; f->fixup; f++) {
|
|
if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
|
|
((f->id == CFI_ID_ANY) || (f->id == cfi->id))) {
|
|
f->fixup(mtd, f->param);
|
|
}
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfi_fixup);
|
|
|
|
int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
|
|
loff_t ofs, size_t len, void *thunk)
|
|
{
|
|
struct map_info *map = mtd->priv;
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
unsigned long adr;
|
|
int chipnum, ret = 0;
|
|
int i, first;
|
|
struct mtd_erase_region_info *regions = mtd->eraseregions;
|
|
|
|
if (ofs > mtd->size)
|
|
return -EINVAL;
|
|
|
|
if ((len + ofs) > mtd->size)
|
|
return -EINVAL;
|
|
|
|
/* Check that both start and end of the requested erase are
|
|
* aligned with the erasesize at the appropriate addresses.
|
|
*/
|
|
|
|
i = 0;
|
|
|
|
/* Skip all erase regions which are ended before the start of
|
|
the requested erase. Actually, to save on the calculations,
|
|
we skip to the first erase region which starts after the
|
|
start of the requested erase, and then go back one.
|
|
*/
|
|
|
|
while (i < mtd->numeraseregions && ofs >= regions[i].offset)
|
|
i++;
|
|
i--;
|
|
|
|
/* OK, now i is pointing at the erase region in which this
|
|
erase request starts. Check the start of the requested
|
|
erase range is aligned with the erase size which is in
|
|
effect here.
|
|
*/
|
|
|
|
if (ofs & (regions[i].erasesize-1))
|
|
return -EINVAL;
|
|
|
|
/* Remember the erase region we start on */
|
|
first = i;
|
|
|
|
/* Next, check that the end of the requested erase is aligned
|
|
* with the erase region at that address.
|
|
*/
|
|
|
|
while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset)
|
|
i++;
|
|
|
|
/* As before, drop back one to point at the region in which
|
|
the address actually falls
|
|
*/
|
|
i--;
|
|
|
|
if ((ofs + len) & (regions[i].erasesize-1))
|
|
return -EINVAL;
|
|
|
|
chipnum = ofs >> cfi->chipshift;
|
|
adr = ofs - (chipnum << cfi->chipshift);
|
|
|
|
i=first;
|
|
|
|
while(len) {
|
|
int size = regions[i].erasesize;
|
|
|
|
ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
adr += size;
|
|
ofs += size;
|
|
len -= size;
|
|
|
|
if (ofs == regions[i].offset + size * regions[i].numblocks)
|
|
i++;
|
|
|
|
if (adr >> cfi->chipshift) {
|
|
adr = 0;
|
|
chipnum++;
|
|
|
|
if (chipnum >= cfi->numchips)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfi_varsize_frob);
|
|
|
|
MODULE_LICENSE("GPL");
|