kernel_optimize_test/include/asm-x86_64/pci.h
Muli Ben-Yehuda 73c59afc65 finish i386 and x86-64 sysdata conversion
This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully
also fixes Riku's and Andy's observed bugs.  It is based on Yinghai Lu's
and Andy Whitcroft's patches (thanks!) with some changes:

- introduce pci_scan_bus_with_sysdata() and use it instead of
  pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will
  allocate the sysdata structure and then call pci_scan_bus().
- always allocate pci_sysdata dynamically. The whole point of this
  sysdata work is to make it easy to do root-bus specific things
  (e.g., support PCI domains and IOMMU's). I dislike using a default
  struct pci_sysdata in some places and a dynamically allocated
  pci_sysdata elsewhere - the potential for someone indavertantly
  changing the default structure is too high.
- this patch only makes the minimal changes necessary, i.e., the NUMA node is
  always initialized to -1. Patches to do the right thing with regards
  to the NUMA node can build on top of this (either add a 'node'
  parameter to pci_scan_bus_with_sysdata() or just update the node
  when it becomes known).

The patch was compile tested with various configurations (e.g., NUMAQ,
VISWS) and run-time tested on i386 and x86-64.  Unfortunately none of my
machines exhibited the bugs so caveat emptor.

Andy, could you please see if this fixes the NUMA issues you've seen?
Riku, does this fix "pci=noacpi" on your laptop?

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: <riku.seppala@kymp.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00

127 lines
3.4 KiB
C

#ifndef __x8664_PCI_H
#define __x8664_PCI_H
#include <asm/io.h>
#ifdef __KERNEL__
struct pci_sysdata {
int node; /* NUMA node */
void* iommu; /* IOMMU private data */
};
extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
#ifdef CONFIG_CALGARY_IOMMU
static inline void* pci_iommu(struct pci_bus *bus)
{
struct pci_sysdata *sd = bus->sysdata;
return sd->iommu;
}
static inline void set_pci_iommu(struct pci_bus *bus, void *val)
{
struct pci_sysdata *sd = bus->sysdata;
sd->iommu = val;
}
#endif /* CONFIG_CALGARY_IOMMU */
#include <linux/mm.h> /* for struct page */
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
#ifdef CONFIG_PCI
extern unsigned int pcibios_assign_all_busses(void);
#else
#define pcibios_assign_all_busses() 0
#endif
#define pcibios_scan_all_fns(a, b) 0
extern unsigned long pci_mem_start;
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM (pci_mem_start)
#define PCIBIOS_MIN_CARDBUS_IO 0x4000
void pcibios_config_init(void);
struct pci_bus * pcibios_scan_root(int bus);
extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
void pcibios_set_master(struct pci_dev *dev);
void pcibios_penalize_isa_irq(int irq, int active);
struct irq_routing_table *pcibios_get_irq_routing_table(void);
int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
#include <asm/page.h>
extern void pci_iommu_alloc(void);
extern int iommu_setup(char *opt);
/* The PCI address space does equal the physical memory
* address space. The networking and block device layers use
* this boolean for bounce buffer decisions
*
* On AMD64 it mostly equals, but we set it to zero if a hardware
* IOMMU (gart) of sotware IOMMU (swiotlb) is available.
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
__u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) \
((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
(((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) \
((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
#else
/* No IOMMU */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
#include <asm-generic/pci-dma-compat.h>
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
*strat = PCI_DMA_BURST_INFINITY;
*strategy_parameter = ~0UL;
}
#endif
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
#endif /* __KERNEL__ */
/* generic pci stuff */
#ifdef CONFIG_PCI
#include <asm-generic/pci.h>
#endif
#endif /* __x8664_PCI_H */