AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
30a2da7b7e
kernel_optimize_test/drivers/iio/temperature/mlx90632.c
Crt Mori 389fc70b60 iio: temperature: mlx90632 Relax the compatibility check 
Register EE_VERSION contains mixture of calibration information and DSP
version. So far, because calibrations were definite, the driver
compatibility depended on whole contents, but in the newer production
process the calibration part changes. Because of that, value in EE_VERSION
will be changed and to avoid that calibration value is same as DSP version
the MSB in calibration part was fixed to 1.
That means existing calibrations (medical and consumer) will now have
hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility
should be based only on DSP version part of the EE_VERSION (bits 0 to 7)
register.

Signed-off-by: Crt Mori <cmo@melexis.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-27 10:52:30 +01:00

759 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* mlx90632.c - Melexis MLX90632 contactless IR temperature sensor
*
* Copyright (c) 2017 Melexis <cmo@melexis.com>
*
* Driver for the Melexis MLX90632 I2C 16-bit IR thermopile sensor
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/math64.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
/* Memory sections addresses */
#define MLX90632_ADDR_RAM 0x4000 /* Start address of ram */
#define MLX90632_ADDR_EEPROM 0x2480 /* Start address of user eeprom */
/* EEPROM addresses - used at startup */
#define MLX90632_EE_CTRL 0x24d4 /* Control register initial value */
#define MLX90632_EE_I2C_ADDR 0x24d5 /* I2C address register initial value */
#define MLX90632_EE_VERSION 0x240b /* EEPROM version reg address */
#define MLX90632_EE_P_R 0x240c /* P_R calibration register 32bit */
#define MLX90632_EE_P_G 0x240e /* P_G calibration register 32bit */
#define MLX90632_EE_P_T 0x2410 /* P_T calibration register 32bit */
#define MLX90632_EE_P_O 0x2412 /* P_O calibration register 32bit */
#define MLX90632_EE_Aa 0x2414 /* Aa calibration register 32bit */
#define MLX90632_EE_Ab 0x2416 /* Ab calibration register 32bit */
#define MLX90632_EE_Ba 0x2418 /* Ba calibration register 32bit */
#define MLX90632_EE_Bb 0x241a /* Bb calibration register 32bit */
#define MLX90632_EE_Ca 0x241c /* Ca calibration register 32bit */
#define MLX90632_EE_Cb 0x241e /* Cb calibration register 32bit */
#define MLX90632_EE_Da 0x2420 /* Da calibration register 32bit */
#define MLX90632_EE_Db 0x2422 /* Db calibration register 32bit */
#define MLX90632_EE_Ea 0x2424 /* Ea calibration register 32bit */
#define MLX90632_EE_Eb 0x2426 /* Eb calibration register 32bit */
#define MLX90632_EE_Fa 0x2428 /* Fa calibration register 32bit */
#define MLX90632_EE_Fb 0x242a /* Fb calibration register 32bit */
#define MLX90632_EE_Ga 0x242c /* Ga calibration register 32bit */
#define MLX90632_EE_Gb 0x242e /* Gb calibration register 16bit */
#define MLX90632_EE_Ka 0x242f /* Ka calibration register 16bit */
#define MLX90632_EE_Ha 0x2481 /* Ha customer calib value reg 16bit */
#define MLX90632_EE_Hb 0x2482 /* Hb customer calib value reg 16bit */
/* Register addresses - volatile */
#define MLX90632_REG_I2C_ADDR 0x3000 /* Chip I2C address register */
/* Control register address - volatile */
#define MLX90632_REG_CONTROL 0x3001 /* Control Register address */
#define MLX90632_CFG_PWR_MASK GENMASK(2, 1) /* PowerMode Mask */
/* PowerModes statuses */
#define MLX90632_PWR_STATUS(ctrl_val) (ctrl_val << 1)
#define MLX90632_PWR_STATUS_HALT MLX90632_PWR_STATUS(0) /* hold */
#define MLX90632_PWR_STATUS_SLEEP_STEP MLX90632_PWR_STATUS(1) /* sleep step*/
#define MLX90632_PWR_STATUS_STEP MLX90632_PWR_STATUS(2) /* step */
#define MLX90632_PWR_STATUS_CONTINUOUS MLX90632_PWR_STATUS(3) /* continuous*/
/* Device status register - volatile */
#define MLX90632_REG_STATUS 0x3fff /* Device status register */
#define MLX90632_STAT_BUSY BIT(10) /* Device busy indicator */
#define MLX90632_STAT_EE_BUSY BIT(9) /* EEPROM busy indicator */
#define MLX90632_STAT_BRST BIT(8) /* Brown out reset indicator */
#define MLX90632_STAT_CYCLE_POS GENMASK(6, 2) /* Data position */
#define MLX90632_STAT_DATA_RDY BIT(0) /* Data ready indicator */
/* RAM_MEAS address-es for each channel */
#define MLX90632_RAM_1(meas_num) (MLX90632_ADDR_RAM + 3 * meas_num)
#define MLX90632_RAM_2(meas_num) (MLX90632_ADDR_RAM + 3 * meas_num + 1)
#define MLX90632_RAM_3(meas_num) (MLX90632_ADDR_RAM + 3 * meas_num + 2)
/* Magic constants */
#define MLX90632_ID_MEDICAL 0x0105 /* EEPROM DSPv5 Medical device id */
#define MLX90632_ID_CONSUMER 0x0205 /* EEPROM DSPv5 Consumer device id */
#define MLX90632_DSP_VERSION 5 /* DSP version */
#define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */
#define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */
#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */
#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */
#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */
struct mlx90632_data {
struct i2c_client *client;
struct mutex lock; /* Multiple reads for single measurement */
struct regmap *regmap;
u16 emissivity;
};
static const struct regmap_range mlx90632_volatile_reg_range[] = {
regmap_reg_range(MLX90632_REG_I2C_ADDR, MLX90632_REG_CONTROL),
regmap_reg_range(MLX90632_REG_STATUS, MLX90632_REG_STATUS),
regmap_reg_range(MLX90632_RAM_1(0),
MLX90632_RAM_3(MLX90632_MAX_MEAS_NUM)),
};
static const struct regmap_access_table mlx90632_volatile_regs_tbl = {
.yes_ranges = mlx90632_volatile_reg_range,
.n_yes_ranges = ARRAY_SIZE(mlx90632_volatile_reg_range),
};
static const struct regmap_range mlx90632_read_reg_range[] = {
regmap_reg_range(MLX90632_EE_VERSION, MLX90632_EE_Ka),
regmap_reg_range(MLX90632_EE_CTRL, MLX90632_EE_I2C_ADDR),
regmap_reg_range(MLX90632_EE_Ha, MLX90632_EE_Hb),
regmap_reg_range(MLX90632_REG_I2C_ADDR, MLX90632_REG_CONTROL),
regmap_reg_range(MLX90632_REG_STATUS, MLX90632_REG_STATUS),
regmap_reg_range(MLX90632_RAM_1(0),
MLX90632_RAM_3(MLX90632_MAX_MEAS_NUM)),
};
static const struct regmap_access_table mlx90632_readable_regs_tbl = {
.yes_ranges = mlx90632_read_reg_range,
.n_yes_ranges = ARRAY_SIZE(mlx90632_read_reg_range),
};
static const struct regmap_range mlx90632_no_write_reg_range[] = {
regmap_reg_range(MLX90632_EE_VERSION, MLX90632_EE_Ka),
regmap_reg_range(MLX90632_RAM_1(0),
MLX90632_RAM_3(MLX90632_MAX_MEAS_NUM)),
};
static const struct regmap_access_table mlx90632_writeable_regs_tbl = {
.no_ranges = mlx90632_no_write_reg_range,
.n_no_ranges = ARRAY_SIZE(mlx90632_no_write_reg_range),
};
static const struct regmap_config mlx90632_regmap = {
.reg_bits = 16,
.val_bits = 16,
.volatile_table = &mlx90632_volatile_regs_tbl,
.rd_table = &mlx90632_readable_regs_tbl,
.wr_table = &mlx90632_writeable_regs_tbl,
.use_single_read = true,
.use_single_write = true,
.reg_format_endian = REGMAP_ENDIAN_BIG,
.val_format_endian = REGMAP_ENDIAN_BIG,
.cache_type = REGCACHE_RBTREE,
};
static s32 mlx90632_pwr_set_sleep_step(struct regmap *regmap)
{
return regmap_update_bits(regmap, MLX90632_REG_CONTROL,
MLX90632_CFG_PWR_MASK,
MLX90632_PWR_STATUS_SLEEP_STEP);
}
static s32 mlx90632_pwr_continuous(struct regmap *regmap)
{
return regmap_update_bits(regmap, MLX90632_REG_CONTROL,
MLX90632_CFG_PWR_MASK,
MLX90632_PWR_STATUS_CONTINUOUS);
}
/**
* mlx90632_perform_measurement - Trigger and retrieve current measurement cycle
* @*data: pointer to mlx90632_data object containing regmap information
*
* Perform a measurement and return latest measurement cycle position reported
* by sensor. This is a blocking function for 500ms, as that is default sensor
* refresh rate.
*/
static int mlx90632_perform_measurement(struct mlx90632_data *data)
{
int ret, tries = 100;
unsigned int reg_status;
ret = regmap_update_bits(data->regmap, MLX90632_REG_STATUS,
MLX90632_STAT_DATA_RDY, 0);
if (ret < 0)
return ret;
while (tries-- > 0) {
ret = regmap_read(data->regmap, MLX90632_REG_STATUS,
&reg_status);
if (ret < 0)
return ret;
if (reg_status & MLX90632_STAT_DATA_RDY)
break;
usleep_range(10000, 11000);
}
if (tries < 0) {
dev_err(&data->client->dev, "data not ready");
return -ETIMEDOUT;
}
return (reg_status & MLX90632_STAT_CYCLE_POS) >> 2;
}
static int mlx90632_channel_new_select(int perform_ret, uint8_t *channel_new,
uint8_t *channel_old)
{
switch (perform_ret) {
case 1:
*channel_new = 1;
*channel_old = 2;
break;
case 2:
*channel_new = 2;
*channel_old = 1;
break;
default:
return -EINVAL;
}
return 0;
}
static int mlx90632_read_ambient_raw(struct regmap *regmap,
s16 *ambient_new_raw, s16 *ambient_old_raw)
{
int ret;
unsigned int read_tmp;
ret = regmap_read(regmap, MLX90632_RAM_3(1), &read_tmp);
if (ret < 0)
return ret;
*ambient_new_raw = (s16)read_tmp;
ret = regmap_read(regmap, MLX90632_RAM_3(2), &read_tmp);
if (ret < 0)
return ret;
*ambient_old_raw = (s16)read_tmp;
return ret;
}
static int mlx90632_read_object_raw(struct regmap *regmap,
int perform_measurement_ret,
s16 *object_new_raw, s16 *object_old_raw)
{
int ret;
unsigned int read_tmp;
s16 read;
u8 channel = 0;
u8 channel_old = 0;
ret = mlx90632_channel_new_select(perform_measurement_ret, &channel,
&channel_old);
if (ret != 0)
return ret;
ret = regmap_read(regmap, MLX90632_RAM_2(channel), &read_tmp);
if (ret < 0)
return ret;
read = (s16)read_tmp;
ret = regmap_read(regmap, MLX90632_RAM_1(channel), &read_tmp);
if (ret < 0)
return ret;
*object_new_raw = (read + (s16)read_tmp) / 2;
ret = regmap_read(regmap, MLX90632_RAM_2(channel_old), &read_tmp);
if (ret < 0)
return ret;
read = (s16)read_tmp;
ret = regmap_read(regmap, MLX90632_RAM_1(channel_old), &read_tmp);
if (ret < 0)
return ret;
*object_old_raw = (read + (s16)read_tmp) / 2;
return ret;
}
static int mlx90632_read_all_channel(struct mlx90632_data *data,
s16 *ambient_new_raw, s16 *ambient_old_raw,
s16 *object_new_raw, s16 *object_old_raw)
{
s32 ret, measurement;
mutex_lock(&data->lock);
measurement = mlx90632_perform_measurement(data);
if (measurement < 0) {
ret = measurement;
goto read_unlock;
}
ret = mlx90632_read_ambient_raw(data->regmap, ambient_new_raw,
ambient_old_raw);
if (ret < 0)
goto read_unlock;
ret = mlx90632_read_object_raw(data->regmap, measurement,
object_new_raw, object_old_raw);
read_unlock:
mutex_unlock(&data->lock);
return ret;
}
static int mlx90632_read_ee_register(struct regmap *regmap, u16 reg_lsb,
s32 *reg_value)
{
s32 ret;
unsigned int read;
u32 value;
ret = regmap_read(regmap, reg_lsb, &read);
if (ret < 0)
return ret;
value = read;
ret = regmap_read(regmap, reg_lsb + 1, &read);
if (ret < 0)
return ret;
*reg_value = (read << 16) | (value & 0xffff);
return 0;
}
static s64 mlx90632_preprocess_temp_amb(s16 ambient_new_raw,
s16 ambient_old_raw, s16 Gb)
{
s64 VR_Ta, kGb, tmp;
kGb = ((s64)Gb * 1000LL) >> 10ULL;
VR_Ta = (s64)ambient_old_raw * 1000000LL +
kGb * div64_s64(((s64)ambient_new_raw * 1000LL),
(MLX90632_REF_3));
tmp = div64_s64(
div64_s64(((s64)ambient_new_raw * 1000000000000LL),
(MLX90632_REF_3)), VR_Ta);
return div64_s64(tmp << 19ULL, 1000LL);
}
static s64 mlx90632_preprocess_temp_obj(s16 object_new_raw, s16 object_old_raw,
s16 ambient_new_raw,
s16 ambient_old_raw, s16 Ka)
{
s64 VR_IR, kKa, tmp;
kKa = ((s64)Ka * 1000LL) >> 10ULL;
VR_IR = (s64)ambient_old_raw * 1000000LL +
kKa * div64_s64(((s64)ambient_new_raw * 1000LL),
(MLX90632_REF_3));
tmp = div64_s64(
div64_s64(((s64)((object_new_raw + object_old_raw) / 2)
* 1000000000000LL), (MLX90632_REF_12)),
VR_IR);
return div64_s64((tmp << 19ULL), 1000LL);
}
static s32 mlx90632_calc_temp_ambient(s16 ambient_new_raw, s16 ambient_old_raw,
s32 P_T, s32 P_R, s32 P_G, s32 P_O,
s16 Gb)
{
s64 Asub, Bsub, Ablock, Bblock, Cblock, AMB, sum;
AMB = mlx90632_preprocess_temp_amb(ambient_new_raw, ambient_old_raw,
Gb);
Asub = ((s64)P_T * 10000000000LL) >> 44ULL;
Bsub = AMB - (((s64)P_R * 1000LL) >> 8ULL);
Ablock = Asub * (Bsub * Bsub);
Bblock = (div64_s64(Bsub * 10000000LL, P_G)) << 20ULL;
Cblock = ((s64)P_O * 10000000000LL) >> 8ULL;
sum = div64_s64(Ablock, 1000000LL) + Bblock + Cblock;
return div64_s64(sum, 10000000LL);
}
static s32 mlx90632_calc_temp_object_iteration(s32 prev_object_temp, s64 object,
s64 TAdut, s32 Fa, s32 Fb,
s32 Ga, s16 Ha, s16 Hb,
u16 emissivity)
{
s64 calcedKsTO, calcedKsTA, ir_Alpha, TAdut4, Alpha_corr;
s64 Ha_customer, Hb_customer;
Ha_customer = ((s64)Ha * 1000000LL) >> 14ULL;
Hb_customer = ((s64)Hb * 100) >> 10ULL;
calcedKsTO = ((s64)((s64)Ga * (prev_object_temp - 25 * 1000LL)
* 1000LL)) >> 36LL;
calcedKsTA = ((s64)(Fb * (TAdut - 25 * 1000000LL))) >> 36LL;
Alpha_corr = div64_s64((((s64)(Fa * 10000000000LL) >> 46LL)
* Ha_customer), 1000LL);
Alpha_corr *= ((s64)(1 * 1000000LL + calcedKsTO + calcedKsTA));
Alpha_corr = emissivity * div64_s64(Alpha_corr, 100000LL);
Alpha_corr = div64_s64(Alpha_corr, 1000LL);
ir_Alpha = div64_s64((s64)object * 10000000LL, Alpha_corr);
TAdut4 = (div64_s64(TAdut, 10000LL) + 27315) *
(div64_s64(TAdut, 10000LL) + 27315) *
(div64_s64(TAdut, 10000LL) + 27315) *
(div64_s64(TAdut, 10000LL) + 27315);
return (int_sqrt64(int_sqrt64(ir_Alpha * 1000000000000LL + TAdut4))
- 27315 - Hb_customer) * 10;
}
static s32 mlx90632_calc_temp_object(s64 object, s64 ambient, s32 Ea, s32 Eb,
s32 Fa, s32 Fb, s32 Ga, s16 Ha, s16 Hb,
u16 tmp_emi)
{
s64 kTA, kTA0, TAdut;
s64 temp = 25000;
s8 i;
kTA = (Ea * 1000LL) >> 16LL;
kTA0 = (Eb * 1000LL) >> 8LL;
TAdut = div64_s64(((ambient - kTA0) * 1000000LL), kTA) + 25 * 1000000LL;
/* Iterations of calculation as described in datasheet */
for (i = 0; i < 5; ++i) {
temp = mlx90632_calc_temp_object_iteration(temp, object, TAdut,
Fa, Fb, Ga, Ha, Hb,
tmp_emi);
}
return temp;
}
static int mlx90632_calc_object_dsp105(struct mlx90632_data *data, int *val)
{
s32 ret;
s32 Ea, Eb, Fa, Fb, Ga;
unsigned int read_tmp;
s16 Ha, Hb, Gb, Ka;
s16 ambient_new_raw, ambient_old_raw, object_new_raw, object_old_raw;
s64 object, ambient;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Ea, &Ea);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Eb, &Eb);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Fa, &Fa);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Fb, &Fb);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Ga, &Ga);
if (ret < 0)
return ret;
ret = regmap_read(data->regmap, MLX90632_EE_Ha, &read_tmp);
if (ret < 0)
return ret;
Ha = (s16)read_tmp;
ret = regmap_read(data->regmap, MLX90632_EE_Hb, &read_tmp);
if (ret < 0)
return ret;
Hb = (s16)read_tmp;
ret = regmap_read(data->regmap, MLX90632_EE_Gb, &read_tmp);
if (ret < 0)
return ret;
Gb = (s16)read_tmp;
ret = regmap_read(data->regmap, MLX90632_EE_Ka, &read_tmp);
if (ret < 0)
return ret;
Ka = (s16)read_tmp;
ret = mlx90632_read_all_channel(data,
&ambient_new_raw, &ambient_old_raw,
&object_new_raw, &object_old_raw);
if (ret < 0)
return ret;
ambient = mlx90632_preprocess_temp_amb(ambient_new_raw,
ambient_old_raw, Gb);
object = mlx90632_preprocess_temp_obj(object_new_raw,
object_old_raw,
ambient_new_raw,
ambient_old_raw, Ka);
*val = mlx90632_calc_temp_object(object, ambient, Ea, Eb, Fa, Fb, Ga,
Ha, Hb, data->emissivity);
return 0;
}
static int mlx90632_calc_ambient_dsp105(struct mlx90632_data *data, int *val)
{
s32 ret;
unsigned int read_tmp;
s32 PT, PR, PG, PO;
s16 Gb;
s16 ambient_new_raw, ambient_old_raw;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_R, &PR);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_G, &PG);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_T, &PT);
if (ret < 0)
return ret;
ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_O, &PO);
if (ret < 0)
return ret;
ret = regmap_read(data->regmap, MLX90632_EE_Gb, &read_tmp);
if (ret < 0)
return ret;
Gb = (s16)read_tmp;
ret = mlx90632_read_ambient_raw(data->regmap, &ambient_new_raw,
&ambient_old_raw);
if (ret < 0)
return ret;
*val = mlx90632_calc_temp_ambient(ambient_new_raw, ambient_old_raw,
PT, PR, PG, PO, Gb);
return ret;
}
static int mlx90632_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int *val,
int *val2, long mask)
{
struct mlx90632_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
switch (channel->channel2) {
case IIO_MOD_TEMP_AMBIENT:
ret = mlx90632_calc_ambient_dsp105(data, val);
if (ret < 0)
return ret;
return IIO_VAL_INT;
case IIO_MOD_TEMP_OBJECT:
ret = mlx90632_calc_object_dsp105(data, val);
if (ret < 0)
return ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_CALIBEMISSIVITY:
if (data->emissivity == 1000) {
*val = 1;
*val2 = 0;
} else {
*val = 0;
*val2 = data->emissivity * 1000;
}
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static int mlx90632_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int val,
int val2, long mask)
{
struct mlx90632_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_CALIBEMISSIVITY:
/* Confirm we are within 0 and 1.0 */
if (val < 0 || val2 < 0 || val > 1 ||
(val == 1 && val2 != 0))
return -EINVAL;
data->emissivity = val * 1000 + val2 / 1000;
return 0;
default:
return -EINVAL;
}
}
static const struct iio_chan_spec mlx90632_channels[] = {
{
.type = IIO_TEMP,
.modified = 1,
.channel2 = IIO_MOD_TEMP_AMBIENT,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
},
{
.type = IIO_TEMP,
.modified = 1,
.channel2 = IIO_MOD_TEMP_OBJECT,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_CALIBEMISSIVITY),
},
};
static const struct iio_info mlx90632_info = {
.read_raw = mlx90632_read_raw,
.write_raw = mlx90632_write_raw,
};
static int mlx90632_sleep(struct mlx90632_data *data)
{
regcache_mark_dirty(data->regmap);
dev_dbg(&data->client->dev, "Requesting sleep");
return mlx90632_pwr_set_sleep_step(data->regmap);
}
static int mlx90632_wakeup(struct mlx90632_data *data)
{
int ret;
ret = regcache_sync(data->regmap);
if (ret < 0) {
dev_err(&data->client->dev,
"Failed to sync regmap registers: %d\n", ret);
return ret;
}
dev_dbg(&data->client->dev, "Requesting wake-up\n");
return mlx90632_pwr_continuous(data->regmap);
}
static int mlx90632_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
struct mlx90632_data *mlx90632;
struct regmap *regmap;
int ret;
unsigned int read;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*mlx90632));
if (!indio_dev) {
dev_err(&client->dev, "Failed to allocate device\n");
return -ENOMEM;
}
regmap = devm_regmap_init_i2c(client, &mlx90632_regmap);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
return ret;
}
mlx90632 = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
mlx90632->client = client;
mlx90632->regmap = regmap;
mutex_init(&mlx90632->lock);
indio_dev->dev.parent = &client->dev;
indio_dev->name = id->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &mlx90632_info;
indio_dev->channels = mlx90632_channels;
indio_dev->num_channels = ARRAY_SIZE(mlx90632_channels);
ret = mlx90632_wakeup(mlx90632);
if (ret < 0) {
dev_err(&client->dev, "Wakeup failed: %d\n", ret);
return ret;
}
ret = regmap_read(mlx90632->regmap, MLX90632_EE_VERSION, &read);
if (ret < 0) {
dev_err(&client->dev, "read of version failed: %d\n", ret);
return ret;
}
if (read == MLX90632_ID_MEDICAL) {
dev_dbg(&client->dev,
"Detected Medical EEPROM calibration %x\n", read);
} else if (read == MLX90632_ID_CONSUMER) {
dev_dbg(&client->dev,
"Detected Consumer EEPROM calibration %x\n", read);
} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
dev_dbg(&client->dev,
"Detected Unknown EEPROM calibration %x\n", read);
} else {
dev_err(&client->dev,
"Wrong DSP version %x (expected %x)\n",
read, MLX90632_DSP_VERSION);
return -EPROTONOSUPPORT;
}
mlx90632->emissivity = 1000;
pm_runtime_disable(&client->dev);
ret = pm_runtime_set_active(&client->dev);
if (ret < 0) {
mlx90632_sleep(mlx90632);
return ret;
}
pm_runtime_enable(&client->dev);
pm_runtime_set_autosuspend_delay(&client->dev, MLX90632_SLEEP_DELAY_MS);
pm_runtime_use_autosuspend(&client->dev);
return iio_device_register(indio_dev);
}
static int mlx90632_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct mlx90632_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);
mlx90632_sleep(data);
return 0;
}
static const struct i2c_device_id mlx90632_id[] = {
{ "mlx90632", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mlx90632_id);
static const struct of_device_id mlx90632_of_match[] = {
{ .compatible = "melexis,mlx90632" },
{ }
};
MODULE_DEVICE_TABLE(of, mlx90632_of_match);
static int __maybe_unused mlx90632_pm_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct mlx90632_data *data = iio_priv(indio_dev);
return mlx90632_sleep(data);
}
static int __maybe_unused mlx90632_pm_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct mlx90632_data *data = iio_priv(indio_dev);
return mlx90632_wakeup(data);
}
static UNIVERSAL_DEV_PM_OPS(mlx90632_pm_ops, mlx90632_pm_suspend,
mlx90632_pm_resume, NULL);
static struct i2c_driver mlx90632_driver = {
.driver = {
.name = "mlx90632",
.of_match_table = mlx90632_of_match,
.pm = &mlx90632_pm_ops,
},
.probe = mlx90632_probe,
.remove = mlx90632_remove,
.id_table = mlx90632_id,
};
module_i2c_driver(mlx90632_driver);
MODULE_AUTHOR("Crt Mori <cmo@melexis.com>");
MODULE_DESCRIPTION("Melexis MLX90632 contactless Infra Red temperature sensor driver");
MODULE_LICENSE("GPL v2");
View Git Blame Copy Permalink