forked from luck/tmp_suning_uos_patched
69e3235d58
Drivers that use the CEC pin framework have no way of processing messages themselves by providing the 'received' callback. This is present in cec_ops, but not in cec_pin_ops. Add support for this callback. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
1346 lines
37 KiB
C
1346 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sched/types.h>
|
|
|
|
#include <media/cec-pin.h>
|
|
#include "cec-pin-priv.h"
|
|
|
|
/* All timings are in microseconds */
|
|
|
|
/* start bit timings */
|
|
#define CEC_TIM_START_BIT_LOW 3700
|
|
#define CEC_TIM_START_BIT_LOW_MIN 3500
|
|
#define CEC_TIM_START_BIT_LOW_MAX 3900
|
|
#define CEC_TIM_START_BIT_TOTAL 4500
|
|
#define CEC_TIM_START_BIT_TOTAL_MIN 4300
|
|
#define CEC_TIM_START_BIT_TOTAL_MAX 4700
|
|
|
|
/* data bit timings */
|
|
#define CEC_TIM_DATA_BIT_0_LOW 1500
|
|
#define CEC_TIM_DATA_BIT_0_LOW_MIN 1300
|
|
#define CEC_TIM_DATA_BIT_0_LOW_MAX 1700
|
|
#define CEC_TIM_DATA_BIT_1_LOW 600
|
|
#define CEC_TIM_DATA_BIT_1_LOW_MIN 400
|
|
#define CEC_TIM_DATA_BIT_1_LOW_MAX 800
|
|
#define CEC_TIM_DATA_BIT_TOTAL 2400
|
|
#define CEC_TIM_DATA_BIT_TOTAL_MIN 2050
|
|
#define CEC_TIM_DATA_BIT_TOTAL_MAX 2750
|
|
/* earliest safe time to sample the bit state */
|
|
#define CEC_TIM_DATA_BIT_SAMPLE 850
|
|
/* earliest time the bit is back to 1 (T7 + 50) */
|
|
#define CEC_TIM_DATA_BIT_HIGH 1750
|
|
|
|
/* when idle, sample once per millisecond */
|
|
#define CEC_TIM_IDLE_SAMPLE 1000
|
|
/* when processing the start bit, sample twice per millisecond */
|
|
#define CEC_TIM_START_BIT_SAMPLE 500
|
|
/* when polling for a state change, sample once every 50 microseconds */
|
|
#define CEC_TIM_SAMPLE 50
|
|
|
|
#define CEC_TIM_LOW_DRIVE_ERROR (1.5 * CEC_TIM_DATA_BIT_TOTAL)
|
|
|
|
/*
|
|
* Total data bit time that is too short/long for a valid bit,
|
|
* used for error injection.
|
|
*/
|
|
#define CEC_TIM_DATA_BIT_TOTAL_SHORT 1800
|
|
#define CEC_TIM_DATA_BIT_TOTAL_LONG 2900
|
|
|
|
/*
|
|
* Total start bit time that is too short/long for a valid bit,
|
|
* used for error injection.
|
|
*/
|
|
#define CEC_TIM_START_BIT_TOTAL_SHORT 4100
|
|
#define CEC_TIM_START_BIT_TOTAL_LONG 5000
|
|
|
|
/* Data bits are 0-7, EOM is bit 8 and ACK is bit 9 */
|
|
#define EOM_BIT 8
|
|
#define ACK_BIT 9
|
|
|
|
struct cec_state {
|
|
const char * const name;
|
|
unsigned int usecs;
|
|
};
|
|
|
|
static const struct cec_state states[CEC_PIN_STATES] = {
|
|
{ "Off", 0 },
|
|
{ "Idle", CEC_TIM_IDLE_SAMPLE },
|
|
{ "Tx Wait", CEC_TIM_SAMPLE },
|
|
{ "Tx Wait for High", CEC_TIM_IDLE_SAMPLE },
|
|
{ "Tx Start Bit Low", CEC_TIM_START_BIT_LOW },
|
|
{ "Tx Start Bit High", CEC_TIM_START_BIT_TOTAL - CEC_TIM_START_BIT_LOW },
|
|
{ "Tx Start Bit High Short", CEC_TIM_START_BIT_TOTAL_SHORT - CEC_TIM_START_BIT_LOW },
|
|
{ "Tx Start Bit High Long", CEC_TIM_START_BIT_TOTAL_LONG - CEC_TIM_START_BIT_LOW },
|
|
{ "Tx Start Bit Low Custom", 0 },
|
|
{ "Tx Start Bit High Custom", 0 },
|
|
{ "Tx Data 0 Low", CEC_TIM_DATA_BIT_0_LOW },
|
|
{ "Tx Data 0 High", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_0_LOW },
|
|
{ "Tx Data 0 High Short", CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_0_LOW },
|
|
{ "Tx Data 0 High Long", CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_0_LOW },
|
|
{ "Tx Data 1 Low", CEC_TIM_DATA_BIT_1_LOW },
|
|
{ "Tx Data 1 High", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_1_LOW },
|
|
{ "Tx Data 1 High Short", CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_1_LOW },
|
|
{ "Tx Data 1 High Long", CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_1_LOW },
|
|
{ "Tx Data 1 High Pre Sample", CEC_TIM_DATA_BIT_SAMPLE - CEC_TIM_DATA_BIT_1_LOW },
|
|
{ "Tx Data 1 High Post Sample", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_SAMPLE },
|
|
{ "Tx Data 1 High Post Sample Short", CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_SAMPLE },
|
|
{ "Tx Data 1 High Post Sample Long", CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_SAMPLE },
|
|
{ "Tx Data Bit Low Custom", 0 },
|
|
{ "Tx Data Bit High Custom", 0 },
|
|
{ "Tx Pulse Low Custom", 0 },
|
|
{ "Tx Pulse High Custom", 0 },
|
|
{ "Tx Low Drive", CEC_TIM_LOW_DRIVE_ERROR },
|
|
{ "Rx Start Bit Low", CEC_TIM_SAMPLE },
|
|
{ "Rx Start Bit High", CEC_TIM_SAMPLE },
|
|
{ "Rx Data Sample", CEC_TIM_DATA_BIT_SAMPLE },
|
|
{ "Rx Data Post Sample", CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_SAMPLE },
|
|
{ "Rx Data Wait for Low", CEC_TIM_SAMPLE },
|
|
{ "Rx Ack Low", CEC_TIM_DATA_BIT_0_LOW },
|
|
{ "Rx Ack Low Post", CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_0_LOW },
|
|
{ "Rx Ack High Post", CEC_TIM_DATA_BIT_HIGH },
|
|
{ "Rx Ack Finish", CEC_TIM_DATA_BIT_TOTAL_MIN - CEC_TIM_DATA_BIT_HIGH },
|
|
{ "Rx Low Drive", CEC_TIM_LOW_DRIVE_ERROR },
|
|
{ "Rx Irq", 0 },
|
|
};
|
|
|
|
static void cec_pin_update(struct cec_pin *pin, bool v, bool force)
|
|
{
|
|
if (!force && v == pin->adap->cec_pin_is_high)
|
|
return;
|
|
|
|
pin->adap->cec_pin_is_high = v;
|
|
if (atomic_read(&pin->work_pin_num_events) < CEC_NUM_PIN_EVENTS) {
|
|
u8 ev = v;
|
|
|
|
if (pin->work_pin_events_dropped) {
|
|
pin->work_pin_events_dropped = false;
|
|
ev |= CEC_PIN_EVENT_FL_DROPPED;
|
|
}
|
|
pin->work_pin_events[pin->work_pin_events_wr] = ev;
|
|
pin->work_pin_ts[pin->work_pin_events_wr] = ktime_get();
|
|
pin->work_pin_events_wr =
|
|
(pin->work_pin_events_wr + 1) % CEC_NUM_PIN_EVENTS;
|
|
atomic_inc(&pin->work_pin_num_events);
|
|
} else {
|
|
pin->work_pin_events_dropped = true;
|
|
pin->work_pin_events_dropped_cnt++;
|
|
}
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
}
|
|
|
|
static bool cec_pin_read(struct cec_pin *pin)
|
|
{
|
|
bool v = pin->ops->read(pin->adap);
|
|
|
|
cec_pin_update(pin, v, false);
|
|
return v;
|
|
}
|
|
|
|
static void cec_pin_low(struct cec_pin *pin)
|
|
{
|
|
pin->ops->low(pin->adap);
|
|
cec_pin_update(pin, false, false);
|
|
}
|
|
|
|
static bool cec_pin_high(struct cec_pin *pin)
|
|
{
|
|
pin->ops->high(pin->adap);
|
|
return cec_pin_read(pin);
|
|
}
|
|
|
|
static bool rx_error_inj(struct cec_pin *pin, unsigned int mode_offset,
|
|
int arg_idx, u8 *arg)
|
|
{
|
|
#ifdef CONFIG_CEC_PIN_ERROR_INJ
|
|
u16 cmd = cec_pin_rx_error_inj(pin);
|
|
u64 e = pin->error_inj[cmd];
|
|
unsigned int mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
|
|
|
|
if (arg_idx >= 0) {
|
|
u8 pos = pin->error_inj_args[cmd][arg_idx];
|
|
|
|
if (arg)
|
|
*arg = pos;
|
|
else if (pos != pin->rx_bit)
|
|
return false;
|
|
}
|
|
|
|
switch (mode) {
|
|
case CEC_ERROR_INJ_MODE_ONCE:
|
|
pin->error_inj[cmd] &=
|
|
~(CEC_ERROR_INJ_MODE_MASK << mode_offset);
|
|
return true;
|
|
case CEC_ERROR_INJ_MODE_ALWAYS:
|
|
return true;
|
|
case CEC_ERROR_INJ_MODE_TOGGLE:
|
|
return pin->rx_toggle;
|
|
default:
|
|
return false;
|
|
}
|
|
#else
|
|
return false;
|
|
#endif
|
|
}
|
|
|
|
static bool rx_nack(struct cec_pin *pin)
|
|
{
|
|
return rx_error_inj(pin, CEC_ERROR_INJ_RX_NACK_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool rx_low_drive(struct cec_pin *pin)
|
|
{
|
|
return rx_error_inj(pin, CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET,
|
|
CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX, NULL);
|
|
}
|
|
|
|
static bool rx_add_byte(struct cec_pin *pin)
|
|
{
|
|
return rx_error_inj(pin, CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool rx_remove_byte(struct cec_pin *pin)
|
|
{
|
|
return rx_error_inj(pin, CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool rx_arb_lost(struct cec_pin *pin, u8 *poll)
|
|
{
|
|
return pin->tx_msg.len == 0 &&
|
|
rx_error_inj(pin, CEC_ERROR_INJ_RX_ARB_LOST_OFFSET,
|
|
CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX, poll);
|
|
}
|
|
|
|
static bool tx_error_inj(struct cec_pin *pin, unsigned int mode_offset,
|
|
int arg_idx, u8 *arg)
|
|
{
|
|
#ifdef CONFIG_CEC_PIN_ERROR_INJ
|
|
u16 cmd = cec_pin_tx_error_inj(pin);
|
|
u64 e = pin->error_inj[cmd];
|
|
unsigned int mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
|
|
|
|
if (arg_idx >= 0) {
|
|
u8 pos = pin->error_inj_args[cmd][arg_idx];
|
|
|
|
if (arg)
|
|
*arg = pos;
|
|
else if (pos != pin->tx_bit)
|
|
return false;
|
|
}
|
|
|
|
switch (mode) {
|
|
case CEC_ERROR_INJ_MODE_ONCE:
|
|
pin->error_inj[cmd] &=
|
|
~(CEC_ERROR_INJ_MODE_MASK << mode_offset);
|
|
return true;
|
|
case CEC_ERROR_INJ_MODE_ALWAYS:
|
|
return true;
|
|
case CEC_ERROR_INJ_MODE_TOGGLE:
|
|
return pin->tx_toggle;
|
|
default:
|
|
return false;
|
|
}
|
|
#else
|
|
return false;
|
|
#endif
|
|
}
|
|
|
|
static bool tx_no_eom(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_NO_EOM_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool tx_early_eom(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool tx_short_bit(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET,
|
|
CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX, NULL);
|
|
}
|
|
|
|
static bool tx_long_bit(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_LONG_BIT_OFFSET,
|
|
CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX, NULL);
|
|
}
|
|
|
|
static bool tx_custom_bit(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET,
|
|
CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX, NULL);
|
|
}
|
|
|
|
static bool tx_short_start(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_SHORT_START_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool tx_long_start(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_LONG_START_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool tx_custom_start(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET,
|
|
-1, NULL);
|
|
}
|
|
|
|
static bool tx_last_bit(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_LAST_BIT_OFFSET,
|
|
CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX, NULL);
|
|
}
|
|
|
|
static u8 tx_add_bytes(struct cec_pin *pin)
|
|
{
|
|
u8 bytes;
|
|
|
|
if (tx_error_inj(pin, CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET,
|
|
CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX, &bytes))
|
|
return bytes;
|
|
return 0;
|
|
}
|
|
|
|
static bool tx_remove_byte(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET, -1, NULL);
|
|
}
|
|
|
|
static bool tx_low_drive(struct cec_pin *pin)
|
|
{
|
|
return tx_error_inj(pin, CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET,
|
|
CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX, NULL);
|
|
}
|
|
|
|
static void cec_pin_to_idle(struct cec_pin *pin)
|
|
{
|
|
/*
|
|
* Reset all status fields, release the bus and
|
|
* go to idle state.
|
|
*/
|
|
pin->rx_bit = pin->tx_bit = 0;
|
|
pin->rx_msg.len = 0;
|
|
memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
|
|
pin->ts = ns_to_ktime(0);
|
|
pin->tx_generated_poll = false;
|
|
pin->tx_post_eom = false;
|
|
if (pin->state >= CEC_ST_TX_WAIT &&
|
|
pin->state <= CEC_ST_TX_LOW_DRIVE)
|
|
pin->tx_toggle ^= 1;
|
|
if (pin->state >= CEC_ST_RX_START_BIT_LOW &&
|
|
pin->state <= CEC_ST_RX_LOW_DRIVE)
|
|
pin->rx_toggle ^= 1;
|
|
pin->state = CEC_ST_IDLE;
|
|
}
|
|
|
|
/*
|
|
* Handle Transmit-related states
|
|
*
|
|
* Basic state changes when transmitting:
|
|
*
|
|
* Idle -> Tx Wait (waiting for the end of signal free time) ->
|
|
* Tx Start Bit Low -> Tx Start Bit High ->
|
|
*
|
|
* Regular data bits + EOM:
|
|
* Tx Data 0 Low -> Tx Data 0 High ->
|
|
* or:
|
|
* Tx Data 1 Low -> Tx Data 1 High ->
|
|
*
|
|
* First 4 data bits or Ack bit:
|
|
* Tx Data 0 Low -> Tx Data 0 High ->
|
|
* or:
|
|
* Tx Data 1 Low -> Tx Data 1 High -> Tx Data 1 Pre Sample ->
|
|
* Tx Data 1 Post Sample ->
|
|
*
|
|
* After the last Ack go to Idle.
|
|
*
|
|
* If it detects a Low Drive condition then:
|
|
* Tx Wait For High -> Idle
|
|
*
|
|
* If it loses arbitration, then it switches to state Rx Data Post Sample.
|
|
*/
|
|
static void cec_pin_tx_states(struct cec_pin *pin, ktime_t ts)
|
|
{
|
|
bool v;
|
|
bool is_ack_bit, ack;
|
|
|
|
switch (pin->state) {
|
|
case CEC_ST_TX_WAIT_FOR_HIGH:
|
|
if (cec_pin_read(pin))
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
|
|
case CEC_ST_TX_START_BIT_LOW:
|
|
if (tx_short_start(pin)) {
|
|
/*
|
|
* Error Injection: send an invalid (too short)
|
|
* start pulse.
|
|
*/
|
|
pin->state = CEC_ST_TX_START_BIT_HIGH_SHORT;
|
|
} else if (tx_long_start(pin)) {
|
|
/*
|
|
* Error Injection: send an invalid (too long)
|
|
* start pulse.
|
|
*/
|
|
pin->state = CEC_ST_TX_START_BIT_HIGH_LONG;
|
|
} else {
|
|
pin->state = CEC_ST_TX_START_BIT_HIGH;
|
|
}
|
|
/* Generate start bit */
|
|
cec_pin_high(pin);
|
|
break;
|
|
|
|
case CEC_ST_TX_START_BIT_LOW_CUSTOM:
|
|
pin->state = CEC_ST_TX_START_BIT_HIGH_CUSTOM;
|
|
/* Generate start bit */
|
|
cec_pin_high(pin);
|
|
break;
|
|
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG:
|
|
if (pin->tx_nacked) {
|
|
cec_pin_to_idle(pin);
|
|
pin->tx_msg.len = 0;
|
|
if (pin->tx_generated_poll)
|
|
break;
|
|
pin->work_tx_ts = ts;
|
|
pin->work_tx_status = CEC_TX_STATUS_NACK;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
break;
|
|
}
|
|
/* fall through */
|
|
case CEC_ST_TX_DATA_BIT_0_HIGH:
|
|
case CEC_ST_TX_DATA_BIT_0_HIGH_SHORT:
|
|
case CEC_ST_TX_DATA_BIT_0_HIGH_LONG:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_SHORT:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_LONG:
|
|
/*
|
|
* If the read value is 1, then all is OK, otherwise we have a
|
|
* low drive condition.
|
|
*
|
|
* Special case: when we generate a poll message due to an
|
|
* Arbitration Lost error injection, then ignore this since
|
|
* the pin can actually be low in that case.
|
|
*/
|
|
if (!cec_pin_read(pin) && !pin->tx_generated_poll) {
|
|
/*
|
|
* It's 0, so someone detected an error and pulled the
|
|
* line low for 1.5 times the nominal bit period.
|
|
*/
|
|
pin->tx_msg.len = 0;
|
|
pin->state = CEC_ST_TX_WAIT_FOR_HIGH;
|
|
pin->work_tx_ts = ts;
|
|
pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
|
|
pin->tx_low_drive_cnt++;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
break;
|
|
}
|
|
/* fall through */
|
|
case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
|
|
if (tx_last_bit(pin)) {
|
|
/* Error Injection: just stop sending after this bit */
|
|
cec_pin_to_idle(pin);
|
|
pin->tx_msg.len = 0;
|
|
if (pin->tx_generated_poll)
|
|
break;
|
|
pin->work_tx_ts = ts;
|
|
pin->work_tx_status = CEC_TX_STATUS_OK;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
break;
|
|
}
|
|
pin->tx_bit++;
|
|
/* fall through */
|
|
case CEC_ST_TX_START_BIT_HIGH:
|
|
case CEC_ST_TX_START_BIT_HIGH_SHORT:
|
|
case CEC_ST_TX_START_BIT_HIGH_LONG:
|
|
case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
|
|
if (tx_low_drive(pin)) {
|
|
/* Error injection: go to low drive */
|
|
cec_pin_low(pin);
|
|
pin->state = CEC_ST_TX_LOW_DRIVE;
|
|
pin->tx_msg.len = 0;
|
|
if (pin->tx_generated_poll)
|
|
break;
|
|
pin->work_tx_ts = ts;
|
|
pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
|
|
pin->tx_low_drive_cnt++;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
break;
|
|
}
|
|
if (pin->tx_bit / 10 >= pin->tx_msg.len + pin->tx_extra_bytes) {
|
|
cec_pin_to_idle(pin);
|
|
pin->tx_msg.len = 0;
|
|
if (pin->tx_generated_poll)
|
|
break;
|
|
pin->work_tx_ts = ts;
|
|
pin->work_tx_status = CEC_TX_STATUS_OK;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
break;
|
|
}
|
|
|
|
switch (pin->tx_bit % 10) {
|
|
default: {
|
|
/*
|
|
* In the CEC_ERROR_INJ_TX_ADD_BYTES case we transmit
|
|
* extra bytes, so pin->tx_bit / 10 can become >= 16.
|
|
* Generate bit values for those extra bytes instead
|
|
* of reading them from the transmit buffer.
|
|
*/
|
|
unsigned int idx = (pin->tx_bit / 10);
|
|
u8 val = idx;
|
|
|
|
if (idx < pin->tx_msg.len)
|
|
val = pin->tx_msg.msg[idx];
|
|
v = val & (1 << (7 - (pin->tx_bit % 10)));
|
|
|
|
pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
|
|
CEC_ST_TX_DATA_BIT_0_LOW;
|
|
break;
|
|
}
|
|
case EOM_BIT: {
|
|
unsigned int tot_len = pin->tx_msg.len +
|
|
pin->tx_extra_bytes;
|
|
unsigned int tx_byte_idx = pin->tx_bit / 10;
|
|
|
|
v = !pin->tx_post_eom && tx_byte_idx == tot_len - 1;
|
|
if (tot_len > 1 && tx_byte_idx == tot_len - 2 &&
|
|
tx_early_eom(pin)) {
|
|
/* Error injection: set EOM one byte early */
|
|
v = true;
|
|
pin->tx_post_eom = true;
|
|
} else if (v && tx_no_eom(pin)) {
|
|
/* Error injection: no EOM */
|
|
v = false;
|
|
}
|
|
pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
|
|
CEC_ST_TX_DATA_BIT_0_LOW;
|
|
break;
|
|
}
|
|
case ACK_BIT:
|
|
pin->state = CEC_ST_TX_DATA_BIT_1_LOW;
|
|
break;
|
|
}
|
|
if (tx_custom_bit(pin))
|
|
pin->state = CEC_ST_TX_DATA_BIT_LOW_CUSTOM;
|
|
cec_pin_low(pin);
|
|
break;
|
|
|
|
case CEC_ST_TX_DATA_BIT_0_LOW:
|
|
case CEC_ST_TX_DATA_BIT_1_LOW:
|
|
v = pin->state == CEC_ST_TX_DATA_BIT_1_LOW;
|
|
is_ack_bit = pin->tx_bit % 10 == ACK_BIT;
|
|
if (v && (pin->tx_bit < 4 || is_ack_bit)) {
|
|
pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE;
|
|
} else if (!is_ack_bit && tx_short_bit(pin)) {
|
|
/* Error Injection: send an invalid (too short) bit */
|
|
pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH_SHORT :
|
|
CEC_ST_TX_DATA_BIT_0_HIGH_SHORT;
|
|
} else if (!is_ack_bit && tx_long_bit(pin)) {
|
|
/* Error Injection: send an invalid (too long) bit */
|
|
pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH_LONG :
|
|
CEC_ST_TX_DATA_BIT_0_HIGH_LONG;
|
|
} else {
|
|
pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH :
|
|
CEC_ST_TX_DATA_BIT_0_HIGH;
|
|
}
|
|
cec_pin_high(pin);
|
|
break;
|
|
|
|
case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
|
|
pin->state = CEC_ST_TX_DATA_BIT_HIGH_CUSTOM;
|
|
cec_pin_high(pin);
|
|
break;
|
|
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
|
|
/* Read the CEC value at the sample time */
|
|
v = cec_pin_read(pin);
|
|
is_ack_bit = pin->tx_bit % 10 == ACK_BIT;
|
|
/*
|
|
* If v == 0 and we're within the first 4 bits
|
|
* of the initiator, then someone else started
|
|
* transmitting and we lost the arbitration
|
|
* (i.e. the logical address of the other
|
|
* transmitter has more leading 0 bits in the
|
|
* initiator).
|
|
*/
|
|
if (!v && !is_ack_bit && !pin->tx_generated_poll) {
|
|
pin->tx_msg.len = 0;
|
|
pin->work_tx_ts = ts;
|
|
pin->work_tx_status = CEC_TX_STATUS_ARB_LOST;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
pin->rx_bit = pin->tx_bit;
|
|
pin->tx_bit = 0;
|
|
memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
|
|
pin->rx_msg.msg[0] = pin->tx_msg.msg[0];
|
|
pin->rx_msg.msg[0] &= (0xff << (8 - pin->rx_bit));
|
|
pin->rx_msg.len = 0;
|
|
pin->ts = ktime_sub_us(ts, CEC_TIM_DATA_BIT_SAMPLE);
|
|
pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
|
|
pin->rx_bit++;
|
|
break;
|
|
}
|
|
pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE;
|
|
if (!is_ack_bit && tx_short_bit(pin)) {
|
|
/* Error Injection: send an invalid (too short) bit */
|
|
pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT;
|
|
} else if (!is_ack_bit && tx_long_bit(pin)) {
|
|
/* Error Injection: send an invalid (too long) bit */
|
|
pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG;
|
|
}
|
|
if (!is_ack_bit)
|
|
break;
|
|
/* Was the message ACKed? */
|
|
ack = cec_msg_is_broadcast(&pin->tx_msg) ? v : !v;
|
|
if (!ack && (!pin->tx_ignore_nack_until_eom ||
|
|
pin->tx_bit / 10 == pin->tx_msg.len - 1) &&
|
|
!pin->tx_post_eom) {
|
|
/*
|
|
* Note: the CEC spec is ambiguous regarding
|
|
* what action to take when a NACK appears
|
|
* before the last byte of the payload was
|
|
* transmitted: either stop transmitting
|
|
* immediately, or wait until the last byte
|
|
* was transmitted.
|
|
*
|
|
* Most CEC implementations appear to stop
|
|
* immediately, and that's what we do here
|
|
* as well.
|
|
*/
|
|
pin->tx_nacked = true;
|
|
}
|
|
break;
|
|
|
|
case CEC_ST_TX_PULSE_LOW_CUSTOM:
|
|
cec_pin_high(pin);
|
|
pin->state = CEC_ST_TX_PULSE_HIGH_CUSTOM;
|
|
break;
|
|
|
|
case CEC_ST_TX_PULSE_HIGH_CUSTOM:
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle Receive-related states
|
|
*
|
|
* Basic state changes when receiving:
|
|
*
|
|
* Rx Start Bit Low -> Rx Start Bit High ->
|
|
* Regular data bits + EOM:
|
|
* Rx Data Sample -> Rx Data Post Sample -> Rx Data High ->
|
|
* Ack bit 0:
|
|
* Rx Ack Low -> Rx Ack Low Post -> Rx Data High ->
|
|
* Ack bit 1:
|
|
* Rx Ack High Post -> Rx Data High ->
|
|
* Ack bit 0 && EOM:
|
|
* Rx Ack Low -> Rx Ack Low Post -> Rx Ack Finish -> Idle
|
|
*/
|
|
static void cec_pin_rx_states(struct cec_pin *pin, ktime_t ts)
|
|
{
|
|
s32 delta;
|
|
bool v;
|
|
bool ack;
|
|
bool bcast, for_us;
|
|
u8 dest;
|
|
u8 poll;
|
|
|
|
switch (pin->state) {
|
|
/* Receive states */
|
|
case CEC_ST_RX_START_BIT_LOW:
|
|
v = cec_pin_read(pin);
|
|
if (!v)
|
|
break;
|
|
pin->state = CEC_ST_RX_START_BIT_HIGH;
|
|
delta = ktime_us_delta(ts, pin->ts);
|
|
/* Start bit low is too short, go back to idle */
|
|
if (delta < CEC_TIM_START_BIT_LOW_MIN - CEC_TIM_IDLE_SAMPLE) {
|
|
if (!pin->rx_start_bit_low_too_short_cnt++) {
|
|
pin->rx_start_bit_low_too_short_ts = ktime_to_ns(pin->ts);
|
|
pin->rx_start_bit_low_too_short_delta = delta;
|
|
}
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
}
|
|
if (rx_arb_lost(pin, &poll)) {
|
|
cec_msg_init(&pin->tx_msg, poll >> 4, poll & 0xf);
|
|
pin->tx_generated_poll = true;
|
|
pin->tx_extra_bytes = 0;
|
|
pin->state = CEC_ST_TX_START_BIT_HIGH;
|
|
pin->ts = ts;
|
|
}
|
|
break;
|
|
|
|
case CEC_ST_RX_START_BIT_HIGH:
|
|
v = cec_pin_read(pin);
|
|
delta = ktime_us_delta(ts, pin->ts);
|
|
/*
|
|
* Unfortunately the spec does not specify when to give up
|
|
* and go to idle. We just pick TOTAL_LONG.
|
|
*/
|
|
if (v && delta > CEC_TIM_START_BIT_TOTAL_LONG) {
|
|
pin->rx_start_bit_too_long_cnt++;
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
}
|
|
if (v)
|
|
break;
|
|
/* Start bit is too short, go back to idle */
|
|
if (delta < CEC_TIM_START_BIT_TOTAL_MIN - CEC_TIM_IDLE_SAMPLE) {
|
|
if (!pin->rx_start_bit_too_short_cnt++) {
|
|
pin->rx_start_bit_too_short_ts = ktime_to_ns(pin->ts);
|
|
pin->rx_start_bit_too_short_delta = delta;
|
|
}
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
}
|
|
if (rx_low_drive(pin)) {
|
|
/* Error injection: go to low drive */
|
|
cec_pin_low(pin);
|
|
pin->state = CEC_ST_RX_LOW_DRIVE;
|
|
pin->rx_low_drive_cnt++;
|
|
break;
|
|
}
|
|
pin->state = CEC_ST_RX_DATA_SAMPLE;
|
|
pin->ts = ts;
|
|
pin->rx_eom = false;
|
|
break;
|
|
|
|
case CEC_ST_RX_DATA_SAMPLE:
|
|
v = cec_pin_read(pin);
|
|
pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
|
|
switch (pin->rx_bit % 10) {
|
|
default:
|
|
if (pin->rx_bit / 10 < CEC_MAX_MSG_SIZE)
|
|
pin->rx_msg.msg[pin->rx_bit / 10] |=
|
|
v << (7 - (pin->rx_bit % 10));
|
|
break;
|
|
case EOM_BIT:
|
|
pin->rx_eom = v;
|
|
pin->rx_msg.len = pin->rx_bit / 10 + 1;
|
|
break;
|
|
case ACK_BIT:
|
|
break;
|
|
}
|
|
pin->rx_bit++;
|
|
break;
|
|
|
|
case CEC_ST_RX_DATA_POST_SAMPLE:
|
|
pin->state = CEC_ST_RX_DATA_WAIT_FOR_LOW;
|
|
break;
|
|
|
|
case CEC_ST_RX_DATA_WAIT_FOR_LOW:
|
|
v = cec_pin_read(pin);
|
|
delta = ktime_us_delta(ts, pin->ts);
|
|
/*
|
|
* Unfortunately the spec does not specify when to give up
|
|
* and go to idle. We just pick TOTAL_LONG.
|
|
*/
|
|
if (v && delta > CEC_TIM_DATA_BIT_TOTAL_LONG) {
|
|
pin->rx_data_bit_too_long_cnt++;
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
}
|
|
if (v)
|
|
break;
|
|
|
|
if (rx_low_drive(pin)) {
|
|
/* Error injection: go to low drive */
|
|
cec_pin_low(pin);
|
|
pin->state = CEC_ST_RX_LOW_DRIVE;
|
|
pin->rx_low_drive_cnt++;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Go to low drive state when the total bit time is
|
|
* too short.
|
|
*/
|
|
if (delta < CEC_TIM_DATA_BIT_TOTAL_MIN) {
|
|
if (!pin->rx_data_bit_too_short_cnt++) {
|
|
pin->rx_data_bit_too_short_ts = ktime_to_ns(pin->ts);
|
|
pin->rx_data_bit_too_short_delta = delta;
|
|
}
|
|
cec_pin_low(pin);
|
|
pin->state = CEC_ST_RX_LOW_DRIVE;
|
|
pin->rx_low_drive_cnt++;
|
|
break;
|
|
}
|
|
pin->ts = ts;
|
|
if (pin->rx_bit % 10 != 9) {
|
|
pin->state = CEC_ST_RX_DATA_SAMPLE;
|
|
break;
|
|
}
|
|
|
|
dest = cec_msg_destination(&pin->rx_msg);
|
|
bcast = dest == CEC_LOG_ADDR_BROADCAST;
|
|
/* for_us == broadcast or directed to us */
|
|
for_us = bcast || (pin->la_mask & (1 << dest));
|
|
/* ACK bit value */
|
|
ack = bcast ? 1 : !for_us;
|
|
|
|
if (for_us && rx_nack(pin)) {
|
|
/* Error injection: toggle the ACK bit */
|
|
ack = !ack;
|
|
}
|
|
|
|
if (ack) {
|
|
/* No need to write to the bus, just wait */
|
|
pin->state = CEC_ST_RX_ACK_HIGH_POST;
|
|
break;
|
|
}
|
|
cec_pin_low(pin);
|
|
pin->state = CEC_ST_RX_ACK_LOW;
|
|
break;
|
|
|
|
case CEC_ST_RX_ACK_LOW:
|
|
cec_pin_high(pin);
|
|
pin->state = CEC_ST_RX_ACK_LOW_POST;
|
|
break;
|
|
|
|
case CEC_ST_RX_ACK_LOW_POST:
|
|
case CEC_ST_RX_ACK_HIGH_POST:
|
|
v = cec_pin_read(pin);
|
|
if (v && pin->rx_eom) {
|
|
pin->work_rx_msg = pin->rx_msg;
|
|
pin->work_rx_msg.rx_ts = ktime_to_ns(ts);
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
pin->ts = ts;
|
|
pin->state = CEC_ST_RX_ACK_FINISH;
|
|
break;
|
|
}
|
|
pin->rx_bit++;
|
|
pin->state = CEC_ST_RX_DATA_WAIT_FOR_LOW;
|
|
break;
|
|
|
|
case CEC_ST_RX_ACK_FINISH:
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Main timer function
|
|
*
|
|
*/
|
|
static enum hrtimer_restart cec_pin_timer(struct hrtimer *timer)
|
|
{
|
|
struct cec_pin *pin = container_of(timer, struct cec_pin, timer);
|
|
struct cec_adapter *adap = pin->adap;
|
|
ktime_t ts;
|
|
s32 delta;
|
|
u32 usecs;
|
|
|
|
ts = ktime_get();
|
|
if (ktime_to_ns(pin->timer_ts)) {
|
|
delta = ktime_us_delta(ts, pin->timer_ts);
|
|
pin->timer_cnt++;
|
|
if (delta > 100 && pin->state != CEC_ST_IDLE) {
|
|
/* Keep track of timer overruns */
|
|
pin->timer_sum_overrun += delta;
|
|
pin->timer_100ms_overruns++;
|
|
if (delta > 300)
|
|
pin->timer_300ms_overruns++;
|
|
if (delta > pin->timer_max_overrun)
|
|
pin->timer_max_overrun = delta;
|
|
}
|
|
}
|
|
if (adap->monitor_pin_cnt)
|
|
cec_pin_read(pin);
|
|
|
|
if (pin->wait_usecs) {
|
|
/*
|
|
* If we are monitoring the pin, then we have to
|
|
* sample at regular intervals.
|
|
*/
|
|
if (pin->wait_usecs > 150) {
|
|
pin->wait_usecs -= 100;
|
|
pin->timer_ts = ktime_add_us(ts, 100);
|
|
hrtimer_forward_now(timer, ns_to_ktime(100000));
|
|
return HRTIMER_RESTART;
|
|
}
|
|
if (pin->wait_usecs > 100) {
|
|
pin->wait_usecs /= 2;
|
|
pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
|
|
hrtimer_forward_now(timer,
|
|
ns_to_ktime(pin->wait_usecs * 1000));
|
|
return HRTIMER_RESTART;
|
|
}
|
|
pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
|
|
hrtimer_forward_now(timer,
|
|
ns_to_ktime(pin->wait_usecs * 1000));
|
|
pin->wait_usecs = 0;
|
|
return HRTIMER_RESTART;
|
|
}
|
|
|
|
switch (pin->state) {
|
|
/* Transmit states */
|
|
case CEC_ST_TX_WAIT_FOR_HIGH:
|
|
case CEC_ST_TX_START_BIT_LOW:
|
|
case CEC_ST_TX_START_BIT_HIGH:
|
|
case CEC_ST_TX_START_BIT_HIGH_SHORT:
|
|
case CEC_ST_TX_START_BIT_HIGH_LONG:
|
|
case CEC_ST_TX_START_BIT_LOW_CUSTOM:
|
|
case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
|
|
case CEC_ST_TX_DATA_BIT_0_LOW:
|
|
case CEC_ST_TX_DATA_BIT_0_HIGH:
|
|
case CEC_ST_TX_DATA_BIT_0_HIGH_SHORT:
|
|
case CEC_ST_TX_DATA_BIT_0_HIGH_LONG:
|
|
case CEC_ST_TX_DATA_BIT_1_LOW:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_SHORT:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_LONG:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT:
|
|
case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG:
|
|
case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
|
|
case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
|
|
case CEC_ST_TX_PULSE_LOW_CUSTOM:
|
|
case CEC_ST_TX_PULSE_HIGH_CUSTOM:
|
|
cec_pin_tx_states(pin, ts);
|
|
break;
|
|
|
|
/* Receive states */
|
|
case CEC_ST_RX_START_BIT_LOW:
|
|
case CEC_ST_RX_START_BIT_HIGH:
|
|
case CEC_ST_RX_DATA_SAMPLE:
|
|
case CEC_ST_RX_DATA_POST_SAMPLE:
|
|
case CEC_ST_RX_DATA_WAIT_FOR_LOW:
|
|
case CEC_ST_RX_ACK_LOW:
|
|
case CEC_ST_RX_ACK_LOW_POST:
|
|
case CEC_ST_RX_ACK_HIGH_POST:
|
|
case CEC_ST_RX_ACK_FINISH:
|
|
cec_pin_rx_states(pin, ts);
|
|
break;
|
|
|
|
case CEC_ST_IDLE:
|
|
case CEC_ST_TX_WAIT:
|
|
if (!cec_pin_high(pin)) {
|
|
/* Start bit, switch to receive state */
|
|
pin->ts = ts;
|
|
pin->state = CEC_ST_RX_START_BIT_LOW;
|
|
/*
|
|
* If a transmit is pending, then that transmit should
|
|
* use a signal free time of no more than
|
|
* CEC_SIGNAL_FREE_TIME_NEW_INITIATOR since it will
|
|
* have a new initiator due to the receive that is now
|
|
* starting.
|
|
*/
|
|
if (pin->tx_msg.len && pin->tx_signal_free_time >
|
|
CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
|
|
pin->tx_signal_free_time =
|
|
CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
|
|
break;
|
|
}
|
|
if (ktime_to_ns(pin->ts) == 0)
|
|
pin->ts = ts;
|
|
if (pin->tx_msg.len) {
|
|
/*
|
|
* Check if the bus has been free for long enough
|
|
* so we can kick off the pending transmit.
|
|
*/
|
|
delta = ktime_us_delta(ts, pin->ts);
|
|
if (delta / CEC_TIM_DATA_BIT_TOTAL >
|
|
pin->tx_signal_free_time) {
|
|
pin->tx_nacked = false;
|
|
if (tx_custom_start(pin))
|
|
pin->state = CEC_ST_TX_START_BIT_LOW_CUSTOM;
|
|
else
|
|
pin->state = CEC_ST_TX_START_BIT_LOW;
|
|
/* Generate start bit */
|
|
cec_pin_low(pin);
|
|
break;
|
|
}
|
|
if (delta / CEC_TIM_DATA_BIT_TOTAL >
|
|
pin->tx_signal_free_time - 1)
|
|
pin->state = CEC_ST_TX_WAIT;
|
|
break;
|
|
}
|
|
if (pin->tx_custom_pulse && pin->state == CEC_ST_IDLE) {
|
|
pin->tx_custom_pulse = false;
|
|
/* Generate custom pulse */
|
|
cec_pin_low(pin);
|
|
pin->state = CEC_ST_TX_PULSE_LOW_CUSTOM;
|
|
break;
|
|
}
|
|
if (pin->state != CEC_ST_IDLE || pin->ops->enable_irq == NULL ||
|
|
pin->enable_irq_failed || adap->is_configuring ||
|
|
adap->is_configured || adap->monitor_all_cnt)
|
|
break;
|
|
/* Switch to interrupt mode */
|
|
atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_ENABLE);
|
|
pin->state = CEC_ST_RX_IRQ;
|
|
wake_up_interruptible(&pin->kthread_waitq);
|
|
return HRTIMER_NORESTART;
|
|
|
|
case CEC_ST_TX_LOW_DRIVE:
|
|
case CEC_ST_RX_LOW_DRIVE:
|
|
cec_pin_high(pin);
|
|
cec_pin_to_idle(pin);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (pin->state) {
|
|
case CEC_ST_TX_START_BIT_LOW_CUSTOM:
|
|
case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
|
|
case CEC_ST_TX_PULSE_LOW_CUSTOM:
|
|
usecs = pin->tx_custom_low_usecs;
|
|
break;
|
|
case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
|
|
case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
|
|
case CEC_ST_TX_PULSE_HIGH_CUSTOM:
|
|
usecs = pin->tx_custom_high_usecs;
|
|
break;
|
|
default:
|
|
usecs = states[pin->state].usecs;
|
|
break;
|
|
}
|
|
|
|
if (!adap->monitor_pin_cnt || usecs <= 150) {
|
|
pin->wait_usecs = 0;
|
|
pin->timer_ts = ktime_add_us(ts, usecs);
|
|
hrtimer_forward_now(timer,
|
|
ns_to_ktime(usecs * 1000));
|
|
return HRTIMER_RESTART;
|
|
}
|
|
pin->wait_usecs = usecs - 100;
|
|
pin->timer_ts = ktime_add_us(ts, 100);
|
|
hrtimer_forward_now(timer, ns_to_ktime(100000));
|
|
return HRTIMER_RESTART;
|
|
}
|
|
|
|
static int cec_pin_thread_func(void *_adap)
|
|
{
|
|
struct cec_adapter *adap = _adap;
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
for (;;) {
|
|
wait_event_interruptible(pin->kthread_waitq,
|
|
kthread_should_stop() ||
|
|
pin->work_rx_msg.len ||
|
|
pin->work_tx_status ||
|
|
atomic_read(&pin->work_irq_change) ||
|
|
atomic_read(&pin->work_pin_num_events));
|
|
|
|
if (pin->work_rx_msg.len) {
|
|
struct cec_msg *msg = &pin->work_rx_msg;
|
|
|
|
if (msg->len > 1 && msg->len < CEC_MAX_MSG_SIZE &&
|
|
rx_add_byte(pin)) {
|
|
/* Error injection: add byte to the message */
|
|
msg->msg[msg->len++] = 0x55;
|
|
}
|
|
if (msg->len > 2 && rx_remove_byte(pin)) {
|
|
/* Error injection: remove byte from message */
|
|
msg->len--;
|
|
}
|
|
if (msg->len > CEC_MAX_MSG_SIZE)
|
|
msg->len = CEC_MAX_MSG_SIZE;
|
|
cec_received_msg_ts(adap, msg,
|
|
ns_to_ktime(pin->work_rx_msg.rx_ts));
|
|
msg->len = 0;
|
|
}
|
|
if (pin->work_tx_status) {
|
|
unsigned int tx_status = pin->work_tx_status;
|
|
|
|
pin->work_tx_status = 0;
|
|
cec_transmit_attempt_done_ts(adap, tx_status,
|
|
pin->work_tx_ts);
|
|
}
|
|
|
|
while (atomic_read(&pin->work_pin_num_events)) {
|
|
unsigned int idx = pin->work_pin_events_rd;
|
|
u8 v = pin->work_pin_events[idx];
|
|
|
|
cec_queue_pin_cec_event(adap,
|
|
v & CEC_PIN_EVENT_FL_IS_HIGH,
|
|
v & CEC_PIN_EVENT_FL_DROPPED,
|
|
pin->work_pin_ts[idx]);
|
|
pin->work_pin_events_rd = (idx + 1) % CEC_NUM_PIN_EVENTS;
|
|
atomic_dec(&pin->work_pin_num_events);
|
|
}
|
|
|
|
switch (atomic_xchg(&pin->work_irq_change,
|
|
CEC_PIN_IRQ_UNCHANGED)) {
|
|
case CEC_PIN_IRQ_DISABLE:
|
|
pin->ops->disable_irq(adap);
|
|
cec_pin_high(pin);
|
|
cec_pin_to_idle(pin);
|
|
hrtimer_start(&pin->timer, ns_to_ktime(0),
|
|
HRTIMER_MODE_REL);
|
|
break;
|
|
case CEC_PIN_IRQ_ENABLE:
|
|
pin->enable_irq_failed = !pin->ops->enable_irq(adap);
|
|
if (pin->enable_irq_failed) {
|
|
cec_pin_to_idle(pin);
|
|
hrtimer_start(&pin->timer, ns_to_ktime(0),
|
|
HRTIMER_MODE_REL);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (kthread_should_stop())
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cec_pin_adap_enable(struct cec_adapter *adap, bool enable)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
pin->enabled = enable;
|
|
if (enable) {
|
|
atomic_set(&pin->work_pin_num_events, 0);
|
|
pin->work_pin_events_rd = pin->work_pin_events_wr = 0;
|
|
pin->work_pin_events_dropped = false;
|
|
cec_pin_read(pin);
|
|
cec_pin_to_idle(pin);
|
|
pin->tx_msg.len = 0;
|
|
pin->timer_ts = ns_to_ktime(0);
|
|
atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
|
|
pin->kthread = kthread_run(cec_pin_thread_func, adap,
|
|
"cec-pin");
|
|
if (IS_ERR(pin->kthread)) {
|
|
pr_err("cec-pin: kernel_thread() failed\n");
|
|
return PTR_ERR(pin->kthread);
|
|
}
|
|
hrtimer_start(&pin->timer, ns_to_ktime(0),
|
|
HRTIMER_MODE_REL);
|
|
} else {
|
|
if (pin->ops->disable_irq)
|
|
pin->ops->disable_irq(adap);
|
|
hrtimer_cancel(&pin->timer);
|
|
kthread_stop(pin->kthread);
|
|
cec_pin_read(pin);
|
|
cec_pin_to_idle(pin);
|
|
pin->state = CEC_ST_OFF;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cec_pin_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
if (log_addr == CEC_LOG_ADDR_INVALID)
|
|
pin->la_mask = 0;
|
|
else
|
|
pin->la_mask |= (1 << log_addr);
|
|
return 0;
|
|
}
|
|
|
|
void cec_pin_start_timer(struct cec_pin *pin)
|
|
{
|
|
if (pin->state != CEC_ST_RX_IRQ)
|
|
return;
|
|
|
|
atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
|
|
pin->ops->disable_irq(pin->adap);
|
|
cec_pin_high(pin);
|
|
cec_pin_to_idle(pin);
|
|
hrtimer_start(&pin->timer, ns_to_ktime(0), HRTIMER_MODE_REL);
|
|
}
|
|
|
|
static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
|
|
u32 signal_free_time, struct cec_msg *msg)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
/*
|
|
* If a receive is in progress, then this transmit should use
|
|
* a signal free time of max CEC_SIGNAL_FREE_TIME_NEW_INITIATOR
|
|
* since when it starts transmitting it will have a new initiator.
|
|
*/
|
|
if (pin->state != CEC_ST_IDLE &&
|
|
signal_free_time > CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
|
|
signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
|
|
|
|
pin->tx_signal_free_time = signal_free_time;
|
|
pin->tx_extra_bytes = 0;
|
|
pin->tx_msg = *msg;
|
|
if (msg->len > 1) {
|
|
/* Error injection: add byte to the message */
|
|
pin->tx_extra_bytes = tx_add_bytes(pin);
|
|
}
|
|
if (msg->len > 2 && tx_remove_byte(pin)) {
|
|
/* Error injection: remove byte from the message */
|
|
pin->tx_msg.len--;
|
|
}
|
|
pin->work_tx_status = 0;
|
|
pin->tx_bit = 0;
|
|
cec_pin_start_timer(pin);
|
|
return 0;
|
|
}
|
|
|
|
static void cec_pin_adap_status(struct cec_adapter *adap,
|
|
struct seq_file *file)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
seq_printf(file, "state: %s\n", states[pin->state].name);
|
|
seq_printf(file, "tx_bit: %d\n", pin->tx_bit);
|
|
seq_printf(file, "rx_bit: %d\n", pin->rx_bit);
|
|
seq_printf(file, "cec pin: %d\n", pin->ops->read(adap));
|
|
seq_printf(file, "cec pin events dropped: %u\n",
|
|
pin->work_pin_events_dropped_cnt);
|
|
seq_printf(file, "irq failed: %d\n", pin->enable_irq_failed);
|
|
if (pin->timer_100ms_overruns) {
|
|
seq_printf(file, "timer overruns > 100ms: %u of %u\n",
|
|
pin->timer_100ms_overruns, pin->timer_cnt);
|
|
seq_printf(file, "timer overruns > 300ms: %u of %u\n",
|
|
pin->timer_300ms_overruns, pin->timer_cnt);
|
|
seq_printf(file, "max timer overrun: %u usecs\n",
|
|
pin->timer_max_overrun);
|
|
seq_printf(file, "avg timer overrun: %u usecs\n",
|
|
pin->timer_sum_overrun / pin->timer_100ms_overruns);
|
|
}
|
|
if (pin->rx_start_bit_low_too_short_cnt)
|
|
seq_printf(file,
|
|
"rx start bit low too short: %u (delta %u, ts %llu)\n",
|
|
pin->rx_start_bit_low_too_short_cnt,
|
|
pin->rx_start_bit_low_too_short_delta,
|
|
pin->rx_start_bit_low_too_short_ts);
|
|
if (pin->rx_start_bit_too_short_cnt)
|
|
seq_printf(file,
|
|
"rx start bit too short: %u (delta %u, ts %llu)\n",
|
|
pin->rx_start_bit_too_short_cnt,
|
|
pin->rx_start_bit_too_short_delta,
|
|
pin->rx_start_bit_too_short_ts);
|
|
if (pin->rx_start_bit_too_long_cnt)
|
|
seq_printf(file, "rx start bit too long: %u\n",
|
|
pin->rx_start_bit_too_long_cnt);
|
|
if (pin->rx_data_bit_too_short_cnt)
|
|
seq_printf(file,
|
|
"rx data bit too short: %u (delta %u, ts %llu)\n",
|
|
pin->rx_data_bit_too_short_cnt,
|
|
pin->rx_data_bit_too_short_delta,
|
|
pin->rx_data_bit_too_short_ts);
|
|
if (pin->rx_data_bit_too_long_cnt)
|
|
seq_printf(file, "rx data bit too long: %u\n",
|
|
pin->rx_data_bit_too_long_cnt);
|
|
seq_printf(file, "rx initiated low drive: %u\n", pin->rx_low_drive_cnt);
|
|
seq_printf(file, "tx detected low drive: %u\n", pin->tx_low_drive_cnt);
|
|
pin->work_pin_events_dropped_cnt = 0;
|
|
pin->timer_cnt = 0;
|
|
pin->timer_100ms_overruns = 0;
|
|
pin->timer_300ms_overruns = 0;
|
|
pin->timer_max_overrun = 0;
|
|
pin->timer_sum_overrun = 0;
|
|
pin->rx_start_bit_low_too_short_cnt = 0;
|
|
pin->rx_start_bit_too_short_cnt = 0;
|
|
pin->rx_start_bit_too_long_cnt = 0;
|
|
pin->rx_data_bit_too_short_cnt = 0;
|
|
pin->rx_data_bit_too_long_cnt = 0;
|
|
pin->rx_low_drive_cnt = 0;
|
|
pin->tx_low_drive_cnt = 0;
|
|
if (pin->ops->status)
|
|
pin->ops->status(adap, file);
|
|
}
|
|
|
|
static int cec_pin_adap_monitor_all_enable(struct cec_adapter *adap,
|
|
bool enable)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
pin->monitor_all = enable;
|
|
return 0;
|
|
}
|
|
|
|
static void cec_pin_adap_free(struct cec_adapter *adap)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
if (pin->ops->free)
|
|
pin->ops->free(adap);
|
|
adap->pin = NULL;
|
|
kfree(pin);
|
|
}
|
|
|
|
static int cec_pin_received(struct cec_adapter *adap, struct cec_msg *msg)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
if (pin->ops->received)
|
|
return pin->ops->received(adap, msg);
|
|
return -ENOMSG;
|
|
}
|
|
|
|
void cec_pin_changed(struct cec_adapter *adap, bool value)
|
|
{
|
|
struct cec_pin *pin = adap->pin;
|
|
|
|
cec_pin_update(pin, value, false);
|
|
if (!value && (adap->is_configuring || adap->is_configured ||
|
|
adap->monitor_all_cnt))
|
|
atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_DISABLE);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cec_pin_changed);
|
|
|
|
static const struct cec_adap_ops cec_pin_adap_ops = {
|
|
.adap_enable = cec_pin_adap_enable,
|
|
.adap_monitor_all_enable = cec_pin_adap_monitor_all_enable,
|
|
.adap_log_addr = cec_pin_adap_log_addr,
|
|
.adap_transmit = cec_pin_adap_transmit,
|
|
.adap_status = cec_pin_adap_status,
|
|
.adap_free = cec_pin_adap_free,
|
|
#ifdef CONFIG_CEC_PIN_ERROR_INJ
|
|
.error_inj_parse_line = cec_pin_error_inj_parse_line,
|
|
.error_inj_show = cec_pin_error_inj_show,
|
|
#endif
|
|
.received = cec_pin_received,
|
|
};
|
|
|
|
struct cec_adapter *cec_pin_allocate_adapter(const struct cec_pin_ops *pin_ops,
|
|
void *priv, const char *name, u32 caps)
|
|
{
|
|
struct cec_adapter *adap;
|
|
struct cec_pin *pin = kzalloc(sizeof(*pin), GFP_KERNEL);
|
|
|
|
if (pin == NULL)
|
|
return ERR_PTR(-ENOMEM);
|
|
pin->ops = pin_ops;
|
|
hrtimer_init(&pin->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
|
pin->timer.function = cec_pin_timer;
|
|
init_waitqueue_head(&pin->kthread_waitq);
|
|
pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
|
|
pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
|
|
|
|
adap = cec_allocate_adapter(&cec_pin_adap_ops, priv, name,
|
|
caps | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN,
|
|
CEC_MAX_LOG_ADDRS);
|
|
|
|
if (IS_ERR(adap)) {
|
|
kfree(pin);
|
|
return adap;
|
|
}
|
|
|
|
adap->pin = pin;
|
|
pin->adap = adap;
|
|
cec_pin_update(pin, cec_pin_high(pin), true);
|
|
return adap;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cec_pin_allocate_adapter);
|