forked from luck/tmp_suning_uos_patched
a33df6ac31
Both the AFE and HDMI s_stream routines (adv748x_afe_s_stream() and adv748x_hdmi_s_stream()) have to enable the CSI-2 TX they are streaming video data to. With the introduction of dynamic routing between HDMI and AFE entities to TXA, the video stream sink needs to be set at run time, and not statically selected as the s_stream functions are currently doing. To fix this, store a reference to the active CSI-2 TX sink for both HDMI and AFE sources, and operate on it when starting/stopping the stream. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
556 lines
13 KiB
C
556 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Analog Devices ADV748X 8 channel analog front end (AFE) receiver
|
|
* with standard definition processor (SDP)
|
|
*
|
|
* Copyright (C) 2017 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-dv-timings.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
|
|
#include "adv748x.h"
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* SDP
|
|
*/
|
|
|
|
#define ADV748X_AFE_STD_AD_PAL_BG_NTSC_J_SECAM 0x0
|
|
#define ADV748X_AFE_STD_AD_PAL_BG_NTSC_J_SECAM_PED 0x1
|
|
#define ADV748X_AFE_STD_AD_PAL_N_NTSC_J_SECAM 0x2
|
|
#define ADV748X_AFE_STD_AD_PAL_N_NTSC_M_SECAM 0x3
|
|
#define ADV748X_AFE_STD_NTSC_J 0x4
|
|
#define ADV748X_AFE_STD_NTSC_M 0x5
|
|
#define ADV748X_AFE_STD_PAL60 0x6
|
|
#define ADV748X_AFE_STD_NTSC_443 0x7
|
|
#define ADV748X_AFE_STD_PAL_BG 0x8
|
|
#define ADV748X_AFE_STD_PAL_N 0x9
|
|
#define ADV748X_AFE_STD_PAL_M 0xa
|
|
#define ADV748X_AFE_STD_PAL_M_PED 0xb
|
|
#define ADV748X_AFE_STD_PAL_COMB_N 0xc
|
|
#define ADV748X_AFE_STD_PAL_COMB_N_PED 0xd
|
|
#define ADV748X_AFE_STD_PAL_SECAM 0xe
|
|
#define ADV748X_AFE_STD_PAL_SECAM_PED 0xf
|
|
|
|
static int adv748x_afe_read_ro_map(struct adv748x_state *state, u8 reg)
|
|
{
|
|
int ret;
|
|
|
|
/* Select SDP Read-Only Main Map */
|
|
ret = sdp_write(state, ADV748X_SDP_MAP_SEL,
|
|
ADV748X_SDP_MAP_SEL_RO_MAIN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sdp_read(state, reg);
|
|
}
|
|
|
|
static int adv748x_afe_status(struct adv748x_afe *afe, u32 *signal,
|
|
v4l2_std_id *std)
|
|
{
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
int info;
|
|
|
|
/* Read status from reg 0x10 of SDP RO Map */
|
|
info = adv748x_afe_read_ro_map(state, ADV748X_SDP_RO_10);
|
|
if (info < 0)
|
|
return info;
|
|
|
|
if (signal)
|
|
*signal = info & ADV748X_SDP_RO_10_IN_LOCK ?
|
|
0 : V4L2_IN_ST_NO_SIGNAL;
|
|
|
|
if (!std)
|
|
return 0;
|
|
|
|
/* Standard not valid if there is no signal */
|
|
if (!(info & ADV748X_SDP_RO_10_IN_LOCK)) {
|
|
*std = V4L2_STD_UNKNOWN;
|
|
return 0;
|
|
}
|
|
|
|
switch (info & 0x70) {
|
|
case 0x00:
|
|
*std = V4L2_STD_NTSC;
|
|
break;
|
|
case 0x10:
|
|
*std = V4L2_STD_NTSC_443;
|
|
break;
|
|
case 0x20:
|
|
*std = V4L2_STD_PAL_M;
|
|
break;
|
|
case 0x30:
|
|
*std = V4L2_STD_PAL_60;
|
|
break;
|
|
case 0x40:
|
|
*std = V4L2_STD_PAL;
|
|
break;
|
|
case 0x50:
|
|
*std = V4L2_STD_SECAM;
|
|
break;
|
|
case 0x60:
|
|
*std = V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
|
|
break;
|
|
case 0x70:
|
|
*std = V4L2_STD_SECAM;
|
|
break;
|
|
default:
|
|
*std = V4L2_STD_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void adv748x_afe_fill_format(struct adv748x_afe *afe,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
memset(fmt, 0, sizeof(*fmt));
|
|
|
|
fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
|
|
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
fmt->field = V4L2_FIELD_ALTERNATE;
|
|
|
|
fmt->width = 720;
|
|
fmt->height = afe->curr_norm & V4L2_STD_525_60 ? 480 : 576;
|
|
|
|
/* Field height */
|
|
fmt->height /= 2;
|
|
}
|
|
|
|
static int adv748x_afe_std(v4l2_std_id std)
|
|
{
|
|
if (std == V4L2_STD_PAL_60)
|
|
return ADV748X_AFE_STD_PAL60;
|
|
if (std == V4L2_STD_NTSC_443)
|
|
return ADV748X_AFE_STD_NTSC_443;
|
|
if (std == V4L2_STD_PAL_N)
|
|
return ADV748X_AFE_STD_PAL_N;
|
|
if (std == V4L2_STD_PAL_M)
|
|
return ADV748X_AFE_STD_PAL_M;
|
|
if (std == V4L2_STD_PAL_Nc)
|
|
return ADV748X_AFE_STD_PAL_COMB_N;
|
|
if (std & V4L2_STD_NTSC)
|
|
return ADV748X_AFE_STD_NTSC_M;
|
|
if (std & V4L2_STD_PAL)
|
|
return ADV748X_AFE_STD_PAL_BG;
|
|
if (std & V4L2_STD_SECAM)
|
|
return ADV748X_AFE_STD_PAL_SECAM;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void adv748x_afe_set_video_standard(struct adv748x_state *state,
|
|
int sdpstd)
|
|
{
|
|
sdp_clrset(state, ADV748X_SDP_VID_SEL, ADV748X_SDP_VID_SEL_MASK,
|
|
(sdpstd & 0xf) << ADV748X_SDP_VID_SEL_SHIFT);
|
|
}
|
|
|
|
static int adv748x_afe_s_input(struct adv748x_afe *afe, unsigned int input)
|
|
{
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
|
|
return sdp_write(state, ADV748X_SDP_INSEL, input);
|
|
}
|
|
|
|
static int adv748x_afe_g_pixelaspect(struct v4l2_subdev *sd,
|
|
struct v4l2_fract *aspect)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
|
|
if (afe->curr_norm & V4L2_STD_525_60) {
|
|
aspect->numerator = 11;
|
|
aspect->denominator = 10;
|
|
} else {
|
|
aspect->numerator = 54;
|
|
aspect->denominator = 59;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_video_ops
|
|
*/
|
|
|
|
static int adv748x_afe_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
|
|
*norm = afe->curr_norm;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_afe_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
int afe_std = adv748x_afe_std(std);
|
|
|
|
if (afe_std < 0)
|
|
return afe_std;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
adv748x_afe_set_video_standard(state, afe_std);
|
|
afe->curr_norm = std;
|
|
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_afe_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
int afe_std;
|
|
int ret;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
if (afe->streaming) {
|
|
ret = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
/* Set auto detect mode */
|
|
adv748x_afe_set_video_standard(state,
|
|
ADV748X_AFE_STD_AD_PAL_BG_NTSC_J_SECAM);
|
|
|
|
msleep(100);
|
|
|
|
/* Read detected standard */
|
|
ret = adv748x_afe_status(afe, NULL, std);
|
|
|
|
afe_std = adv748x_afe_std(afe->curr_norm);
|
|
if (afe_std < 0)
|
|
goto unlock;
|
|
|
|
/* Restore original state */
|
|
adv748x_afe_set_video_standard(state, afe_std);
|
|
|
|
unlock:
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adv748x_afe_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
|
|
{
|
|
*norm = V4L2_STD_ALL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_afe_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
int ret;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
ret = adv748x_afe_status(afe, status, NULL);
|
|
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
u32 signal = V4L2_IN_ST_NO_SIGNAL;
|
|
int ret;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
if (enable) {
|
|
ret = adv748x_afe_s_input(afe, afe->input);
|
|
if (ret)
|
|
goto unlock;
|
|
}
|
|
|
|
ret = adv748x_tx_power(afe->tx, enable);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
afe->streaming = enable;
|
|
|
|
adv748x_afe_status(afe, &signal, NULL);
|
|
if (signal != V4L2_IN_ST_NO_SIGNAL)
|
|
adv_dbg(state, "Detected SDP signal\n");
|
|
else
|
|
adv_dbg(state, "Couldn't detect SDP video signal\n");
|
|
|
|
unlock:
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops adv748x_afe_video_ops = {
|
|
.g_std = adv748x_afe_g_std,
|
|
.s_std = adv748x_afe_s_std,
|
|
.querystd = adv748x_afe_querystd,
|
|
.g_tvnorms = adv748x_afe_g_tvnorms,
|
|
.g_input_status = adv748x_afe_g_input_status,
|
|
.s_stream = adv748x_afe_s_stream,
|
|
.g_pixelaspect = adv748x_afe_g_pixelaspect,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_pad_ops
|
|
*/
|
|
|
|
static int adv748x_afe_propagate_pixelrate(struct adv748x_afe *afe)
|
|
{
|
|
struct v4l2_subdev *tx;
|
|
|
|
tx = adv748x_get_remote_sd(&afe->pads[ADV748X_AFE_SOURCE]);
|
|
if (!tx)
|
|
return -ENOLINK;
|
|
|
|
/*
|
|
* The ADV748x ADC sampling frequency is twice the externally supplied
|
|
* clock whose frequency is required to be 28.63636 MHz. It oversamples
|
|
* with a factor of 4 resulting in a pixel rate of 14.3180180 MHz.
|
|
*/
|
|
return adv748x_csi2_set_pixelrate(tx, 14318180);
|
|
}
|
|
|
|
static int adv748x_afe_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index != 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_UYVY8_2X8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_afe_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
|
|
struct v4l2_mbus_framefmt *mbusformat;
|
|
|
|
/* It makes no sense to get the format of the analog sink pads */
|
|
if (sdformat->pad != ADV748X_AFE_SOURCE)
|
|
return -EINVAL;
|
|
|
|
if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
mbusformat = v4l2_subdev_get_try_format(sd, cfg, sdformat->pad);
|
|
sdformat->format = *mbusformat;
|
|
} else {
|
|
adv748x_afe_fill_format(afe, &sdformat->format);
|
|
adv748x_afe_propagate_pixelrate(afe);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_afe_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct v4l2_mbus_framefmt *mbusformat;
|
|
|
|
/* It makes no sense to get the format of the analog sink pads */
|
|
if (sdformat->pad != ADV748X_AFE_SOURCE)
|
|
return -EINVAL;
|
|
|
|
if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return adv748x_afe_get_format(sd, cfg, sdformat);
|
|
|
|
mbusformat = v4l2_subdev_get_try_format(sd, cfg, sdformat->pad);
|
|
*mbusformat = sdformat->format;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_pad_ops adv748x_afe_pad_ops = {
|
|
.enum_mbus_code = adv748x_afe_enum_mbus_code,
|
|
.set_fmt = adv748x_afe_set_format,
|
|
.get_fmt = adv748x_afe_get_format,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_ops
|
|
*/
|
|
|
|
static const struct v4l2_subdev_ops adv748x_afe_ops = {
|
|
.video = &adv748x_afe_video_ops,
|
|
.pad = &adv748x_afe_pad_ops,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Controls
|
|
*/
|
|
|
|
static const char * const afe_ctrl_frp_menu[] = {
|
|
"Disabled",
|
|
"Solid Blue",
|
|
"Color Bars",
|
|
"Grey Ramp",
|
|
"Cb Ramp",
|
|
"Cr Ramp",
|
|
"Boundary"
|
|
};
|
|
|
|
static int adv748x_afe_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct adv748x_afe *afe = adv748x_ctrl_to_afe(ctrl);
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
bool enable;
|
|
int ret;
|
|
|
|
ret = sdp_write(state, 0x0e, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
ret = sdp_write(state, ADV748X_SDP_BRI, ctrl->val);
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
/* Hue is inverted according to HSL chart */
|
|
ret = sdp_write(state, ADV748X_SDP_HUE, -ctrl->val);
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
ret = sdp_write(state, ADV748X_SDP_CON, ctrl->val);
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
ret = sdp_write(state, ADV748X_SDP_SD_SAT_U, ctrl->val);
|
|
if (ret)
|
|
break;
|
|
ret = sdp_write(state, ADV748X_SDP_SD_SAT_V, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
enable = !!ctrl->val;
|
|
|
|
/* Enable/Disable Color bar test patterns */
|
|
ret = sdp_clrset(state, ADV748X_SDP_DEF, ADV748X_SDP_DEF_VAL_EN,
|
|
enable);
|
|
if (ret)
|
|
break;
|
|
ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK,
|
|
enable ? ctrl->val - 1 : 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops adv748x_afe_ctrl_ops = {
|
|
.s_ctrl = adv748x_afe_s_ctrl,
|
|
};
|
|
|
|
static int adv748x_afe_init_controls(struct adv748x_afe *afe)
|
|
{
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
|
|
v4l2_ctrl_handler_init(&afe->ctrl_hdl, 5);
|
|
|
|
/* Use our mutex for the controls */
|
|
afe->ctrl_hdl.lock = &state->mutex;
|
|
|
|
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, ADV748X_SDP_BRI_MIN,
|
|
ADV748X_SDP_BRI_MAX, 1, ADV748X_SDP_BRI_DEF);
|
|
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
|
|
V4L2_CID_CONTRAST, ADV748X_SDP_CON_MIN,
|
|
ADV748X_SDP_CON_MAX, 1, ADV748X_SDP_CON_DEF);
|
|
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
|
|
V4L2_CID_SATURATION, ADV748X_SDP_SAT_MIN,
|
|
ADV748X_SDP_SAT_MAX, 1, ADV748X_SDP_SAT_DEF);
|
|
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
|
|
V4L2_CID_HUE, ADV748X_SDP_HUE_MIN,
|
|
ADV748X_SDP_HUE_MAX, 1, ADV748X_SDP_HUE_DEF);
|
|
|
|
v4l2_ctrl_new_std_menu_items(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(afe_ctrl_frp_menu) - 1,
|
|
0, 0, afe_ctrl_frp_menu);
|
|
|
|
afe->sd.ctrl_handler = &afe->ctrl_hdl;
|
|
if (afe->ctrl_hdl.error) {
|
|
v4l2_ctrl_handler_free(&afe->ctrl_hdl);
|
|
return afe->ctrl_hdl.error;
|
|
}
|
|
|
|
return v4l2_ctrl_handler_setup(&afe->ctrl_hdl);
|
|
}
|
|
|
|
int adv748x_afe_init(struct adv748x_afe *afe)
|
|
{
|
|
struct adv748x_state *state = adv748x_afe_to_state(afe);
|
|
int ret;
|
|
unsigned int i;
|
|
|
|
afe->input = 0;
|
|
afe->streaming = false;
|
|
afe->curr_norm = V4L2_STD_NTSC_M;
|
|
|
|
adv748x_subdev_init(&afe->sd, state, &adv748x_afe_ops,
|
|
MEDIA_ENT_F_ATV_DECODER, "afe");
|
|
|
|
/* Identify the first connector found as a default input if set */
|
|
for (i = ADV748X_PORT_AIN0; i <= ADV748X_PORT_AIN7; i++) {
|
|
/* Inputs and ports are 1-indexed to match the data sheet */
|
|
if (state->endpoints[i]) {
|
|
afe->input = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
adv748x_afe_s_input(afe, afe->input);
|
|
|
|
adv_dbg(state, "AFE Default input set to %d\n", afe->input);
|
|
|
|
/* Entity pads and sinks are 0-indexed to match the pads */
|
|
for (i = ADV748X_AFE_SINK_AIN0; i <= ADV748X_AFE_SINK_AIN7; i++)
|
|
afe->pads[i].flags = MEDIA_PAD_FL_SINK;
|
|
|
|
afe->pads[ADV748X_AFE_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
ret = media_entity_pads_init(&afe->sd.entity, ADV748X_AFE_NR_PADS,
|
|
afe->pads);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adv748x_afe_init_controls(afe);
|
|
if (ret)
|
|
goto error;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
media_entity_cleanup(&afe->sd.entity);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void adv748x_afe_cleanup(struct adv748x_afe *afe)
|
|
{
|
|
v4l2_device_unregister_subdev(&afe->sd);
|
|
media_entity_cleanup(&afe->sd.entity);
|
|
v4l2_ctrl_handler_free(&afe->ctrl_hdl);
|
|
}
|