kernel_optimize_test/drivers/media/pci/ivtv/ivtvfb.c
Linus Torvalds 9f68e3655a drm pull for 5.6-rc1
uapi:
 - dma-buf heaps added (and fixed)
 - command line add support for panel oreientation
 - command line allow overriding penguin count
 
 drm:
 - mipi dsi definition updates
 - lockdep annotations for dma_resv
 - remove dma-buf kmap/kunmap support
 - constify fb_ops in all fbdev drivers
 - MST fix for daisy chained hotplug-
 - CTA-861-G modes with VIC >= 193 added
 - fix drm_panel_of_backlight export
 - LVDS decoder support
 - more device based logging support
 - scanline alighment for dumb buffers
 - MST DSC helpers
 
 scheduler:
 - documentation fixes
 - job distribution improvements
 
 panel:
 - Logic PD type 28 panel support
 - Jimax8729d MIPI-DSI
 - igenic JZ4770
 - generic DSI devicetree bindings
 - sony acx424AKP panel
 - Leadtek LTK500HD1829
 - xinpeng XPP055C272
 - AUO B116XAK01
 - GiantPlus GPM940B0
 - BOE NV140FHM-N49
 - Satoz SAT050AT40H12R2
 - Sharp LS020B1DD01D panels.
 
 ttm:
 - use blocking WW lock
 
 i915:
 - hw/uapi state separation
 - Lock annotation improvements
 - selftest improvements
 - ICL/TGL DSI VDSC support
 - VBT parsing improvments
 - Display refactoring
 - DSI updates + fixes
 - HDCP 2.2 for CFL
 - CML PCI ID fixes
 - GLK+ fbc fix
 - PSR fixes
 - GEN/GT refactor improvments
 - DP MST fixes
 - switch context id alloc to xarray
 - workaround updates
 - LMEM debugfs support
 - tiled monitor fixes
 - ICL+ clock gating programming removed
 - DP MST disable sequence fixed
 - LMEM discontiguous object maps
 - prefaulting for discontiguous objects
 - use LMEM for dumb buffers if possible
 - add LMEM mmap support
 
 amdgpu:
 - enable sync object timelines for vulkan
 - MST atomic routines
 - enable MST DSC support
 - add DMCUB display microengine support
 - DC OEM i2c support
 - Renoir DC fixes
 - Initial HDCP 2.x support
 - BACO support for Arcturus
 - Use BACO for runtime PM power save
 - gfxoff on navi10
 - gfx10 golden updates and fixes
 - DCN support on POWER
 - GFXOFF for raven1 refresh
 - MM engine idle handlers cleanup
 - 10bpc EDP panel fixes
 - renoir watermark fixes
 - SR-IOV fixes
 - Arcturus VCN fixes
 - GDDR6 training fixes
 - freesync fixes
 - Pollock support
 
 amdkfd:
 - unify more codepath with amdgpu
 - use KIQ to setup HIQ rather than MMIO
 
 radeon:
 - fix vma fault handler race
 - PPC DMA fix
 - register check fixes for r100/r200
 
 nouveau:
 - mmap_sem vs dma_resv fix
 - rewrite the ACR secure boot code for Turing
 - TU10x graphics engine support (TU11x pending)
 - Page kind mapping for turing
 - 10-bit LUT support
 - GP10B Tegra fixes
 - HD audio regression fix
 
 hisilicon/hibmc:
 - use generic fbdev code and helpers
 
 rockchip:
 - dsi/px30 support
 
 virtio:
 - fb damage support
 - static some functions
 
 vc4:
 - use dma_resv lock wrappers
 
 msm:
 - use dma_resv lock wrappers
 - sc7180 display + DSI support
 - a618 support
 - UBWC support improvements
 
 vmwgfx:
 - updates + new logging uapi
 
 exynos:
 - enable/disable callback cleanups
 
 etnaviv:
 - use dma_resv lock wrappers
 
 atmel-hlcdc:
 - clock fixes
 
 mediatek:
 - cmdq support
 - non-smooth cursor fixes
 - ctm property support
 
 sun4i:
 - suspend support
 - A64 mipi dsi support
 
 rcar-du:
 - Color management module support
 - LVDS encoder dual-link support
 - R8A77980 support
 
 analogic:
 - add support for an6345
 
 ast:
 - atomic modeset support
 - primary plane garbage fix
 
 arcgpu:
 - fixes for fourcc handling
 
 tegra:
 - minor fixes and improvments
 
 mcde:
 - vblank support
 
 meson:
 - OSD1 plane AFBC commit
 
 gma500:
 - add pageflip support
 - reomve global drm_dev
 
 komeda:
 - tweak debugfs output
 - d32 support
 - runtime PM suppotr
 
 udl:
 - use generic shmem helpers
 - cleanup and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD
 m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05
 eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5
 Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK
 /n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI
 dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe
 R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH
 acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ
 q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc
 87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph
 nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV
 P0hdYOYJf6LUda0utuQX
 =oFrI
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Davbe Airlie:
 "This is the main pull request for graphics for 5.6. Usual selection of
  changes all over.

  I've got one outstanding vmwgfx pull that touches mm so kept it
  separate until after all of this lands. I'll try and get it to you
  soon after this, but it might be early next week (nothing wrong with
  code, just my schedule is messy)

  This also hits a lot of fbdev drivers with some cleanups.

  Other notables:
   - vulkan timeline semaphore support added to syncobjs
   - nouveau turing secureboot/graphics support
   - Displayport MST display stream compression support

  Detailed summary:

  uapi:
   - dma-buf heaps added (and fixed)
   - command line add support for panel oreientation
   - command line allow overriding penguin count

  drm:
   - mipi dsi definition updates
   - lockdep annotations for dma_resv
   - remove dma-buf kmap/kunmap support
   - constify fb_ops in all fbdev drivers
   - MST fix for daisy chained hotplug-
   - CTA-861-G modes with VIC >= 193 added
   - fix drm_panel_of_backlight export
   - LVDS decoder support
   - more device based logging support
   - scanline alighment for dumb buffers
   - MST DSC helpers

  scheduler:
   - documentation fixes
   - job distribution improvements

  panel:
   - Logic PD type 28 panel support
   - Jimax8729d MIPI-DSI
   - igenic JZ4770
   - generic DSI devicetree bindings
   - sony acx424AKP panel
   - Leadtek LTK500HD1829
   - xinpeng XPP055C272
   - AUO B116XAK01
   - GiantPlus GPM940B0
   - BOE NV140FHM-N49
   - Satoz SAT050AT40H12R2
   - Sharp LS020B1DD01D panels.

  ttm:
   - use blocking WW lock

  i915:
   - hw/uapi state separation
   - Lock annotation improvements
   - selftest improvements
   - ICL/TGL DSI VDSC support
   - VBT parsing improvments
   - Display refactoring
   - DSI updates + fixes
   - HDCP 2.2 for CFL
   - CML PCI ID fixes
   - GLK+ fbc fix
   - PSR fixes
   - GEN/GT refactor improvments
   - DP MST fixes
   - switch context id alloc to xarray
   - workaround updates
   - LMEM debugfs support
   - tiled monitor fixes
   - ICL+ clock gating programming removed
   - DP MST disable sequence fixed
   - LMEM discontiguous object maps
   - prefaulting for discontiguous objects
   - use LMEM for dumb buffers if possible
   - add LMEM mmap support

  amdgpu:
   - enable sync object timelines for vulkan
   - MST atomic routines
   - enable MST DSC support
   - add DMCUB display microengine support
   - DC OEM i2c support
   - Renoir DC fixes
   - Initial HDCP 2.x support
   - BACO support for Arcturus
   - Use BACO for runtime PM power save
   - gfxoff on navi10
   - gfx10 golden updates and fixes
   - DCN support on POWER
   - GFXOFF for raven1 refresh
   - MM engine idle handlers cleanup
   - 10bpc EDP panel fixes
   - renoir watermark fixes
   - SR-IOV fixes
   - Arcturus VCN fixes
   - GDDR6 training fixes
   - freesync fixes
   - Pollock support

  amdkfd:
   - unify more codepath with amdgpu
   - use KIQ to setup HIQ rather than MMIO

  radeon:
   - fix vma fault handler race
   - PPC DMA fix
   - register check fixes for r100/r200

  nouveau:
   - mmap_sem vs dma_resv fix
   - rewrite the ACR secure boot code for Turing
   - TU10x graphics engine support (TU11x pending)
   - Page kind mapping for turing
   - 10-bit LUT support
   - GP10B Tegra fixes
   - HD audio regression fix

  hisilicon/hibmc:
   - use generic fbdev code and helpers

  rockchip:
   - dsi/px30 support

  virtio:
   - fb damage support
   - static some functions

  vc4:
   - use dma_resv lock wrappers

  msm:
   - use dma_resv lock wrappers
   - sc7180 display + DSI support
   - a618 support
   - UBWC support improvements

  vmwgfx:
   - updates + new logging uapi

  exynos:
   - enable/disable callback cleanups

  etnaviv:
   - use dma_resv lock wrappers

  atmel-hlcdc:
   - clock fixes

  mediatek:
   - cmdq support
   - non-smooth cursor fixes
   - ctm property support

  sun4i:
   - suspend support
   - A64 mipi dsi support

  rcar-du:
   - Color management module support
   - LVDS encoder dual-link support
   - R8A77980 support

  analogic:
   - add support for an6345

  ast:
   - atomic modeset support
   - primary plane garbage fix

  arcgpu:
   - fixes for fourcc handling

  tegra:
   - minor fixes and improvments

  mcde:
   - vblank support

  meson:
   - OSD1 plane AFBC commit

  gma500:
   - add pageflip support
   - reomve global drm_dev

  komeda:
   - tweak debugfs output
   - d32 support
   - runtime PM suppotr

  udl:
   - use generic shmem helpers
   - cleanup and fixes"

* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
  drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
  drm/nouveau/acr: return error when registering LSF if ACR not supported
  drm/nouveau/disp/gv100-: not all channel types support reporting error codes
  drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
  drm/nouveau: support synchronous pushbuf submission
  drm/nouveau: signal pending fences when channel has been killed
  drm/nouveau: reject attempts to submit to dead channels
  drm/nouveau: zero vma pointer even if we only unreference it rather than free
  drm/nouveau: Add HD-audio component notifier support
  drm/nouveau: fix build error without CONFIG_IOMMU_API
  drm/nouveau/kms/nv04: remove set but not used variable 'width'
  drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
  drm/nouveau/mmu: fix comptag memory leak
  drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
  drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
  drm/exynos: Rename Exynos to lowercase
  drm/exynos: change callback names
  drm/mst: Don't do atomic checks over disabled managers
  drm/amdgpu: add the lost mutex_init back
  drm/amd/display: skip opp blank or unblank if test pattern enabled
  ...
2020-01-30 08:04:01 -08:00

1305 lines
36 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
On Screen Display cx23415 Framebuffer driver
This module presents the cx23415 OSD (onscreen display) framebuffer memory
as a standard Linux /dev/fb style framebuffer device. The framebuffer has
support for 8, 16 & 32 bpp packed pixel formats with alpha channel. In 16bpp
mode, there is a choice of a three color depths (12, 15 or 16 bits), but no
local alpha. The colorspace is selectable between rgb & yuv.
Depending on the TV standard configured in the ivtv module at load time,
the initial resolution is either 640x400 (NTSC) or 640x480 (PAL) at 8bpp.
Video timings are locked to ensure a vertical refresh rate of 50Hz (PAL)
or 59.94 (NTSC)
Copyright (c) 2003 Matt T. Yourst <yourst@yourst.com>
Derived from drivers/video/vesafb.c
Portions (c) 1998 Gerd Knorr <kraxel@goldbach.in-berlin.de>
2.6 kernel port:
Copyright (C) 2004 Matthias Badaire
Copyright (C) 2004 Chris Kennedy <c@groovy.org>
Copyright (C) 2006 Ian Armstrong <ian@iarmst.demon.co.uk>
*/
#include "ivtv-driver.h"
#include "ivtv-cards.h"
#include "ivtv-i2c.h"
#include "ivtv-udma.h"
#include "ivtv-mailbox.h"
#include "ivtv-firmware.h"
#include <linux/fb.h>
#include <linux/ivtvfb.h>
#ifdef CONFIG_X86_64
#include <asm/memtype.h>
#endif
/* card parameters */
static int ivtvfb_card_id = -1;
static int ivtvfb_debug = 0;
static bool ivtvfb_force_pat = IS_ENABLED(CONFIG_VIDEO_FB_IVTV_FORCE_PAT);
static bool osd_laced;
static int osd_depth;
static int osd_upper;
static int osd_left;
static int osd_yres;
static int osd_xres;
module_param(ivtvfb_card_id, int, 0444);
module_param_named(debug,ivtvfb_debug, int, 0644);
module_param_named(force_pat, ivtvfb_force_pat, bool, 0644);
module_param(osd_laced, bool, 0444);
module_param(osd_depth, int, 0444);
module_param(osd_upper, int, 0444);
module_param(osd_left, int, 0444);
module_param(osd_yres, int, 0444);
module_param(osd_xres, int, 0444);
MODULE_PARM_DESC(ivtvfb_card_id,
"Only use framebuffer of the specified ivtv card (0-31)\n"
"\t\t\tdefault -1: initialize all available framebuffers");
MODULE_PARM_DESC(debug,
"Debug level (bitmask). Default: errors only\n"
"\t\t\t(debug = 3 gives full debugging)");
MODULE_PARM_DESC(force_pat,
"Force initialization on x86 PAT-enabled systems (bool).\n");
/* Why upper, left, xres, yres, depth, laced ? To match terminology used
by fbset.
Why start at 1 for left & upper coordinate ? Because X doesn't allow 0 */
MODULE_PARM_DESC(osd_laced,
"Interlaced mode\n"
"\t\t\t0=off\n"
"\t\t\t1=on\n"
"\t\t\tdefault off");
MODULE_PARM_DESC(osd_depth,
"Bits per pixel - 8, 16, 32\n"
"\t\t\tdefault 8");
MODULE_PARM_DESC(osd_upper,
"Vertical start position\n"
"\t\t\tdefault 0 (Centered)");
MODULE_PARM_DESC(osd_left,
"Horizontal start position\n"
"\t\t\tdefault 0 (Centered)");
MODULE_PARM_DESC(osd_yres,
"Display height\n"
"\t\t\tdefault 480 (PAL)\n"
"\t\t\t 400 (NTSC)");
MODULE_PARM_DESC(osd_xres,
"Display width\n"
"\t\t\tdefault 640");
MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil, John Harvey, Ian Armstrong");
MODULE_LICENSE("GPL");
/* --------------------------------------------------------------------- */
#define IVTVFB_DBGFLG_WARN (1 << 0)
#define IVTVFB_DBGFLG_INFO (1 << 1)
#define IVTVFB_DEBUG(x, type, fmt, args...) \
do { \
if ((x) & ivtvfb_debug) \
printk(KERN_INFO "ivtvfb%d " type ": " fmt, itv->instance , ## args); \
} while (0)
#define IVTVFB_DEBUG_WARN(fmt, args...) IVTVFB_DEBUG(IVTVFB_DBGFLG_WARN, "warning", fmt , ## args)
#define IVTVFB_DEBUG_INFO(fmt, args...) IVTVFB_DEBUG(IVTVFB_DBGFLG_INFO, "info", fmt , ## args)
/* Standard kernel messages */
#define IVTVFB_ERR(fmt, args...) printk(KERN_ERR "ivtvfb%d: " fmt, itv->instance , ## args)
#define IVTVFB_WARN(fmt, args...) printk(KERN_WARNING "ivtvfb%d: " fmt, itv->instance , ## args)
#define IVTVFB_INFO(fmt, args...) printk(KERN_INFO "ivtvfb%d: " fmt, itv->instance , ## args)
/* --------------------------------------------------------------------- */
#define IVTV_OSD_MAX_WIDTH 720
#define IVTV_OSD_MAX_HEIGHT 576
#define IVTV_OSD_BPP_8 0x00
#define IVTV_OSD_BPP_16_444 0x03
#define IVTV_OSD_BPP_16_555 0x02
#define IVTV_OSD_BPP_16_565 0x01
#define IVTV_OSD_BPP_32 0x04
struct osd_info {
/* Physical base address */
unsigned long video_pbase;
/* Relative base address (relative to start of decoder memory) */
u32 video_rbase;
/* Mapped base address */
volatile char __iomem *video_vbase;
/* Buffer size */
u32 video_buffer_size;
/* video_base rounded down as required by hardware MTRRs */
unsigned long fb_start_aligned_physaddr;
/* video_base rounded up as required by hardware MTRRs */
unsigned long fb_end_aligned_physaddr;
int wc_cookie;
/* Store the buffer offset */
int set_osd_coords_x;
int set_osd_coords_y;
/* Current dimensions (NOT VISIBLE SIZE!) */
int display_width;
int display_height;
int display_byte_stride;
/* Current bits per pixel */
int bits_per_pixel;
int bytes_per_pixel;
/* Frame buffer stuff */
struct fb_info ivtvfb_info;
struct fb_var_screeninfo ivtvfb_defined;
struct fb_fix_screeninfo ivtvfb_fix;
/* Used for a warm start */
struct fb_var_screeninfo fbvar_cur;
int blank_cur;
u32 palette_cur[256];
u32 pan_cur;
};
struct ivtv_osd_coords {
unsigned long offset;
unsigned long max_offset;
int pixel_stride;
int lines;
int x;
int y;
};
/* --------------------------------------------------------------------- */
/* ivtv API calls for framebuffer related support */
static int ivtvfb_get_framebuffer(struct ivtv *itv, u32 *fbbase,
u32 *fblength)
{
u32 data[CX2341X_MBOX_MAX_DATA];
int rc;
ivtv_firmware_check(itv, "ivtvfb_get_framebuffer");
rc = ivtv_vapi_result(itv, data, CX2341X_OSD_GET_FRAMEBUFFER, 0);
*fbbase = data[0];
*fblength = data[1];
return rc;
}
static int ivtvfb_get_osd_coords(struct ivtv *itv,
struct ivtv_osd_coords *osd)
{
struct osd_info *oi = itv->osd_info;
u32 data[CX2341X_MBOX_MAX_DATA];
ivtv_vapi_result(itv, data, CX2341X_OSD_GET_OSD_COORDS, 0);
osd->offset = data[0] - oi->video_rbase;
osd->max_offset = oi->display_width * oi->display_height * 4;
osd->pixel_stride = data[1];
osd->lines = data[2];
osd->x = data[3];
osd->y = data[4];
return 0;
}
static int ivtvfb_set_osd_coords(struct ivtv *itv, const struct ivtv_osd_coords *osd)
{
struct osd_info *oi = itv->osd_info;
oi->display_width = osd->pixel_stride;
oi->display_byte_stride = osd->pixel_stride * oi->bytes_per_pixel;
oi->set_osd_coords_x += osd->x;
oi->set_osd_coords_y = osd->y;
return ivtv_vapi(itv, CX2341X_OSD_SET_OSD_COORDS, 5,
osd->offset + oi->video_rbase,
osd->pixel_stride,
osd->lines, osd->x, osd->y);
}
static int ivtvfb_set_display_window(struct ivtv *itv, struct v4l2_rect *ivtv_window)
{
int osd_height_limit = itv->is_out_50hz ? 576 : 480;
/* Only fail if resolution too high, otherwise fudge the start coords. */
if ((ivtv_window->height > osd_height_limit) || (ivtv_window->width > IVTV_OSD_MAX_WIDTH))
return -EINVAL;
/* Ensure we don't exceed display limits */
if (ivtv_window->top + ivtv_window->height > osd_height_limit) {
IVTVFB_DEBUG_WARN("ivtv_ioctl_fb_set_display_window - Invalid height setting (%d, %d)\n",
ivtv_window->top, ivtv_window->height);
ivtv_window->top = osd_height_limit - ivtv_window->height;
}
if (ivtv_window->left + ivtv_window->width > IVTV_OSD_MAX_WIDTH) {
IVTVFB_DEBUG_WARN("ivtv_ioctl_fb_set_display_window - Invalid width setting (%d, %d)\n",
ivtv_window->left, ivtv_window->width);
ivtv_window->left = IVTV_OSD_MAX_WIDTH - ivtv_window->width;
}
/* Set the OSD origin */
write_reg((ivtv_window->top << 16) | ivtv_window->left, 0x02a04);
/* How much to display */
write_reg(((ivtv_window->top+ivtv_window->height) << 16) | (ivtv_window->left+ivtv_window->width), 0x02a08);
/* Pass this info back the yuv handler */
itv->yuv_info.osd_vis_w = ivtv_window->width;
itv->yuv_info.osd_vis_h = ivtv_window->height;
itv->yuv_info.osd_x_offset = ivtv_window->left;
itv->yuv_info.osd_y_offset = ivtv_window->top;
return 0;
}
static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
unsigned long ivtv_dest_addr, void __user *userbuf,
int size_in_bytes)
{
DEFINE_WAIT(wait);
int got_sig = 0;
mutex_lock(&itv->udma.lock);
/* Map User DMA */
if (ivtv_udma_setup(itv, ivtv_dest_addr, userbuf, size_in_bytes) <= 0) {
mutex_unlock(&itv->udma.lock);
IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, Error with get_user_pages: %d bytes, %d pages returned\n",
size_in_bytes, itv->udma.page_count);
/* get_user_pages must have failed completely */
return -EIO;
}
IVTVFB_DEBUG_INFO("ivtvfb_prep_dec_dma_to_device, %d bytes, %d pages\n",
size_in_bytes, itv->udma.page_count);
ivtv_udma_prepare(itv);
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
if (got_sig && test_and_clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags))
break;
got_sig = 0;
schedule();
}
finish_wait(&itv->dma_waitq, &wait);
/* Unmap Last DMA Xfer */
ivtv_udma_unmap(itv);
mutex_unlock(&itv->udma.lock);
if (got_sig) {
IVTV_DEBUG_INFO("User stopped OSD\n");
return -EINTR;
}
return 0;
}
static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source,
unsigned long dest_offset, int count)
{
DEFINE_WAIT(wait);
struct osd_info *oi = itv->osd_info;
/* Nothing to do */
if (count == 0) {
IVTVFB_DEBUG_WARN("ivtvfb_prep_frame: Nothing to do. count = 0\n");
return -EINVAL;
}
/* Check Total FB Size */
if ((dest_offset + count) > oi->video_buffer_size) {
IVTVFB_WARN("ivtvfb_prep_frame: Overflowing the framebuffer %ld, only %d available\n",
dest_offset + count, oi->video_buffer_size);
return -E2BIG;
}
/* Not fatal, but will have undesirable results */
if ((unsigned long)source & 3)
IVTVFB_WARN("ivtvfb_prep_frame: Source address not 32 bit aligned (%p)\n",
source);
if (dest_offset & 3)
IVTVFB_WARN("ivtvfb_prep_frame: Dest offset not 32 bit aligned (%ld)\n", dest_offset);
if (count & 3)
IVTVFB_WARN("ivtvfb_prep_frame: Count not a multiple of 4 (%d)\n", count);
/* Check Source */
if (!access_ok(source + dest_offset, count)) {
IVTVFB_WARN("Invalid userspace pointer %p\n", source);
IVTVFB_DEBUG_WARN("access_ok() failed for offset 0x%08lx source %p count %d\n",
dest_offset, source, count);
return -EINVAL;
}
/* OSD Address to send DMA to */
dest_offset += IVTV_DECODER_OFFSET + oi->video_rbase;
/* Fill Buffers */
return ivtvfb_prep_dec_dma_to_device(itv, dest_offset, source, count);
}
static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
void *dst;
int err = 0;
int dma_err;
unsigned long total_size;
struct ivtv *itv = (struct ivtv *) info->par;
unsigned long dma_offset =
IVTV_DECODER_OFFSET + itv->osd_info->video_rbase;
unsigned long dma_size;
u16 lead = 0, tail = 0;
if (info->state != FBINFO_STATE_RUNNING)
return -EPERM;
total_size = info->screen_size;
if (total_size == 0)
total_size = info->fix.smem_len;
if (p > total_size)
return -EFBIG;
if (count > total_size) {
err = -EFBIG;
count = total_size;
}
if (count + p > total_size) {
if (!err)
err = -ENOSPC;
count = total_size - p;
}
dst = (void __force *) (info->screen_base + p);
if (info->fbops->fb_sync)
info->fbops->fb_sync(info);
/* If transfer size > threshold and both src/dst
addresses are aligned, use DMA */
if (count >= 4096 &&
((unsigned long)buf & 3) == ((unsigned long)dst & 3)) {
/* Odd address = can't DMA. Align */
if ((unsigned long)dst & 3) {
lead = 4 - ((unsigned long)dst & 3);
if (copy_from_user(dst, buf, lead))
return -EFAULT;
buf += lead;
dst += lead;
}
/* DMA resolution is 32 bits */
if ((count - lead) & 3)
tail = (count - lead) & 3;
/* DMA the data */
dma_size = count - lead - tail;
dma_err = ivtvfb_prep_dec_dma_to_device(itv,
p + lead + dma_offset, (void __user *)buf, dma_size);
if (dma_err)
return dma_err;
dst += dma_size;
buf += dma_size;
/* Copy any leftover data */
if (tail && copy_from_user(dst, buf, tail))
return -EFAULT;
} else if (copy_from_user(dst, buf, count)) {
return -EFAULT;
}
if (!err)
*ppos += count;
return (err) ? err : count;
}
static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
{
DEFINE_WAIT(wait);
struct ivtv *itv = (struct ivtv *)info->par;
int rc = 0;
switch (cmd) {
case FBIOGET_VBLANK: {
struct fb_vblank vblank;
u32 trace;
memset(&vblank, 0, sizeof(struct fb_vblank));
vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
FB_VBLANK_HAVE_VSYNC;
trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
if (itv->is_out_50hz && trace > 312)
trace -= 312;
else if (itv->is_out_60hz && trace > 262)
trace -= 262;
if (trace == 1)
vblank.flags |= FB_VBLANK_VSYNCING;
vblank.count = itv->last_vsync_field;
vblank.vcount = trace;
vblank.hcount = 0;
if (copy_to_user((void __user *)arg, &vblank, sizeof(vblank)))
return -EFAULT;
return 0;
}
case FBIO_WAITFORVSYNC:
prepare_to_wait(&itv->vsync_waitq, &wait, TASK_INTERRUPTIBLE);
if (!schedule_timeout(msecs_to_jiffies(50)))
rc = -ETIMEDOUT;
finish_wait(&itv->vsync_waitq, &wait);
return rc;
case IVTVFB_IOC_DMA_FRAME: {
struct ivtvfb_dma_frame args;
IVTVFB_DEBUG_INFO("IVTVFB_IOC_DMA_FRAME\n");
if (copy_from_user(&args, (void __user *)arg, sizeof(args)))
return -EFAULT;
return ivtvfb_prep_frame(itv, cmd, args.source, args.dest_offset, args.count);
}
default:
IVTVFB_DEBUG_INFO("Unknown ioctl %08x\n", cmd);
return -EINVAL;
}
return 0;
}
/* Framebuffer device handling */
static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var)
{
struct osd_info *oi = itv->osd_info;
struct ivtv_osd_coords ivtv_osd;
struct v4l2_rect ivtv_window;
int osd_mode = -1;
IVTVFB_DEBUG_INFO("ivtvfb_set_var\n");
/* Select color space */
if (var->nonstd) /* YUV */
write_reg(read_reg(0x02a00) | 0x0002000, 0x02a00);
else /* RGB */
write_reg(read_reg(0x02a00) & ~0x0002000, 0x02a00);
/* Set the color mode */
switch (var->bits_per_pixel) {
case 8:
osd_mode = IVTV_OSD_BPP_8;
break;
case 32:
osd_mode = IVTV_OSD_BPP_32;
break;
case 16:
switch (var->green.length) {
case 4:
osd_mode = IVTV_OSD_BPP_16_444;
break;
case 5:
osd_mode = IVTV_OSD_BPP_16_555;
break;
case 6:
osd_mode = IVTV_OSD_BPP_16_565;
break;
default:
IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid bpp\n");
}
break;
default:
IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid bpp\n");
}
/* Set video mode. Although rare, the display can become scrambled even
if we don't change mode. Always 'bounce' to osd_mode via mode 0 */
if (osd_mode != -1) {
ivtv_vapi(itv, CX2341X_OSD_SET_PIXEL_FORMAT, 1, 0);
ivtv_vapi(itv, CX2341X_OSD_SET_PIXEL_FORMAT, 1, osd_mode);
}
oi->bits_per_pixel = var->bits_per_pixel;
oi->bytes_per_pixel = var->bits_per_pixel / 8;
/* Set the flicker filter */
switch (var->vmode & FB_VMODE_MASK) {
case FB_VMODE_NONINTERLACED: /* Filter on */
ivtv_vapi(itv, CX2341X_OSD_SET_FLICKER_STATE, 1, 1);
break;
case FB_VMODE_INTERLACED: /* Filter off */
ivtv_vapi(itv, CX2341X_OSD_SET_FLICKER_STATE, 1, 0);
break;
default:
IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid video mode\n");
}
/* Read the current osd info */
ivtvfb_get_osd_coords(itv, &ivtv_osd);
/* Now set the OSD to the size we want */
ivtv_osd.pixel_stride = var->xres_virtual;
ivtv_osd.lines = var->yres_virtual;
ivtv_osd.x = 0;
ivtv_osd.y = 0;
ivtvfb_set_osd_coords(itv, &ivtv_osd);
/* Can't seem to find the right API combo for this.
Use another function which does what we need through direct register access. */
ivtv_window.width = var->xres;
ivtv_window.height = var->yres;
/* Minimum margin cannot be 0, as X won't allow such a mode */
if (!var->upper_margin)
var->upper_margin++;
if (!var->left_margin)
var->left_margin++;
ivtv_window.top = var->upper_margin - 1;
ivtv_window.left = var->left_margin - 1;
ivtvfb_set_display_window(itv, &ivtv_window);
/* Pass screen size back to yuv handler */
itv->yuv_info.osd_full_w = ivtv_osd.pixel_stride;
itv->yuv_info.osd_full_h = ivtv_osd.lines;
/* Force update of yuv registers */
itv->yuv_info.yuv_forced_update = 1;
/* Keep a copy of these settings */
memcpy(&oi->fbvar_cur, var, sizeof(oi->fbvar_cur));
IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n",
var->xres, var->yres,
var->xres_virtual, var->yres_virtual,
var->bits_per_pixel);
IVTVFB_DEBUG_INFO("Display position: %d, %d\n",
var->left_margin, var->upper_margin);
IVTVFB_DEBUG_INFO("Display filter: %s\n",
(var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED ? "on" : "off");
IVTVFB_DEBUG_INFO("Color space: %s\n", var->nonstd ? "YUV" : "RGB");
return 0;
}
static int ivtvfb_get_fix(struct ivtv *itv, struct fb_fix_screeninfo *fix)
{
struct osd_info *oi = itv->osd_info;
IVTVFB_DEBUG_INFO("ivtvfb_get_fix\n");
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
strscpy(fix->id, "cx23415 TV out", sizeof(fix->id));
fix->smem_start = oi->video_pbase;
fix->smem_len = oi->video_buffer_size;
fix->type = FB_TYPE_PACKED_PIXELS;
fix->visual = (oi->bits_per_pixel == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
fix->xpanstep = 1;
fix->ypanstep = 1;
fix->ywrapstep = 0;
fix->line_length = oi->display_byte_stride;
fix->accel = FB_ACCEL_NONE;
return 0;
}
/* Check the requested display mode, returning -EINVAL if we can't
handle it. */
static int _ivtvfb_check_var(struct fb_var_screeninfo *var, struct ivtv *itv)
{
struct osd_info *oi = itv->osd_info;
int osd_height_limit;
u32 pixclock, hlimit, vlimit;
IVTVFB_DEBUG_INFO("ivtvfb_check_var\n");
/* Set base references for mode calcs. */
if (itv->is_out_50hz) {
pixclock = 84316;
hlimit = 776;
vlimit = 591;
osd_height_limit = 576;
}
else {
pixclock = 83926;
hlimit = 776;
vlimit = 495;
osd_height_limit = 480;
}
if (var->bits_per_pixel == 8 || var->bits_per_pixel == 32) {
var->transp.offset = 24;
var->transp.length = 8;
var->red.offset = 16;
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
}
else if (var->bits_per_pixel == 16) {
/* To find out the true mode, check green length */
switch (var->green.length) {
case 4:
var->red.offset = 8;
var->red.length = 4;
var->green.offset = 4;
var->green.length = 4;
var->blue.offset = 0;
var->blue.length = 4;
var->transp.offset = 12;
var->transp.length = 1;
break;
case 5:
var->red.offset = 10;
var->red.length = 5;
var->green.offset = 5;
var->green.length = 5;
var->blue.offset = 0;
var->blue.length = 5;
var->transp.offset = 15;
var->transp.length = 1;
break;
default:
var->red.offset = 11;
var->red.length = 5;
var->green.offset = 5;
var->green.length = 6;
var->blue.offset = 0;
var->blue.length = 5;
var->transp.offset = 0;
var->transp.length = 0;
break;
}
}
else {
IVTVFB_DEBUG_WARN("Invalid colour mode: %d\n", var->bits_per_pixel);
return -EINVAL;
}
/* Check the resolution */
if (var->xres > IVTV_OSD_MAX_WIDTH || var->yres > osd_height_limit) {
IVTVFB_DEBUG_WARN("Invalid resolution: %dx%d\n",
var->xres, var->yres);
return -EINVAL;
}
/* Max horizontal size is 1023 @ 32bpp, 2046 & 16bpp, 4092 @ 8bpp */
if (var->xres_virtual > 4095 / (var->bits_per_pixel / 8) ||
var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8) > oi->video_buffer_size ||
var->xres_virtual < var->xres ||
var->yres_virtual < var->yres) {
IVTVFB_DEBUG_WARN("Invalid virtual resolution: %dx%d\n",
var->xres_virtual, var->yres_virtual);
return -EINVAL;
}
/* Some extra checks if in 8 bit mode */
if (var->bits_per_pixel == 8) {
/* Width must be a multiple of 4 */
if (var->xres & 3) {
IVTVFB_DEBUG_WARN("Invalid resolution for 8bpp: %d\n", var->xres);
return -EINVAL;
}
if (var->xres_virtual & 3) {
IVTVFB_DEBUG_WARN("Invalid virtual resolution for 8bpp: %d)\n", var->xres_virtual);
return -EINVAL;
}
}
else if (var->bits_per_pixel == 16) {
/* Width must be a multiple of 2 */
if (var->xres & 1) {
IVTVFB_DEBUG_WARN("Invalid resolution for 16bpp: %d\n", var->xres);
return -EINVAL;
}
if (var->xres_virtual & 1) {
IVTVFB_DEBUG_WARN("Invalid virtual resolution for 16bpp: %d)\n", var->xres_virtual);
return -EINVAL;
}
}
/* Now check the offsets */
if (var->xoffset >= var->xres_virtual || var->yoffset >= var->yres_virtual) {
IVTVFB_DEBUG_WARN("Invalid offset: %d (%d) %d (%d)\n",
var->xoffset, var->xres_virtual, var->yoffset, var->yres_virtual);
return -EINVAL;
}
/* Check pixel format */
if (var->nonstd > 1) {
IVTVFB_DEBUG_WARN("Invalid nonstd % d\n", var->nonstd);
return -EINVAL;
}
/* Check video mode */
if (((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) &&
((var->vmode & FB_VMODE_MASK) != FB_VMODE_INTERLACED)) {
IVTVFB_DEBUG_WARN("Invalid video mode: %d\n", var->vmode & FB_VMODE_MASK);
return -EINVAL;
}
/* Check the left & upper margins
If the margins are too large, just center the screen
(enforcing margins causes too many problems) */
if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1)
var->left_margin = 1 + ((IVTV_OSD_MAX_WIDTH - var->xres) / 2);
if (var->upper_margin + var->yres > (itv->is_out_50hz ? 577 : 481))
var->upper_margin = 1 + (((itv->is_out_50hz ? 576 : 480) -
var->yres) / 2);
/* Maintain overall 'size' for a constant refresh rate */
var->right_margin = hlimit - var->left_margin - var->xres;
var->lower_margin = vlimit - var->upper_margin - var->yres;
/* Fixed sync times */
var->hsync_len = 24;
var->vsync_len = 2;
/* Non-interlaced / interlaced mode is used to switch the OSD filter
on or off. Adjust the clock timings to maintain a constant
vertical refresh rate. */
if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED)
var->pixclock = pixclock / 2;
else
var->pixclock = pixclock;
itv->osd_rect.width = var->xres;
itv->osd_rect.height = var->yres;
IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n",
var->xres, var->yres,
var->xres_virtual, var->yres_virtual,
var->bits_per_pixel);
IVTVFB_DEBUG_INFO("Display position: %d, %d\n",
var->left_margin, var->upper_margin);
IVTVFB_DEBUG_INFO("Display filter: %s\n",
(var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED ? "on" : "off");
IVTVFB_DEBUG_INFO("Color space: %s\n", var->nonstd ? "YUV" : "RGB");
return 0;
}
static int ivtvfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct ivtv *itv = (struct ivtv *) info->par;
IVTVFB_DEBUG_INFO("ivtvfb_check_var\n");
return _ivtvfb_check_var(var, itv);
}
static int ivtvfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
u32 osd_pan_index;
struct ivtv *itv = (struct ivtv *) info->par;
if (var->yoffset + info->var.yres > info->var.yres_virtual ||
var->xoffset + info->var.xres > info->var.xres_virtual)
return -EINVAL;
osd_pan_index = var->yoffset * info->fix.line_length
+ var->xoffset * info->var.bits_per_pixel / 8;
write_reg(osd_pan_index, 0x02A0C);
/* Pass this info back the yuv handler */
itv->yuv_info.osd_x_pan = var->xoffset;
itv->yuv_info.osd_y_pan = var->yoffset;
/* Force update of yuv registers */
itv->yuv_info.yuv_forced_update = 1;
/* Remember this value */
itv->osd_info->pan_cur = osd_pan_index;
return 0;
}
static int ivtvfb_set_par(struct fb_info *info)
{
int rc = 0;
struct ivtv *itv = (struct ivtv *) info->par;
IVTVFB_DEBUG_INFO("ivtvfb_set_par\n");
rc = ivtvfb_set_var(itv, &info->var);
ivtvfb_pan_display(&info->var, info);
ivtvfb_get_fix(itv, &info->fix);
ivtv_firmware_check(itv, "ivtvfb_set_par");
return rc;
}
static int ivtvfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
u32 color, *palette;
struct ivtv *itv = (struct ivtv *)info->par;
if (regno >= info->cmap.len)
return -EINVAL;
color = ((transp & 0xFF00) << 16) |((red & 0xFF00) << 8) | (green & 0xFF00) | ((blue & 0xFF00) >> 8);
if (info->var.bits_per_pixel <= 8) {
write_reg(regno, 0x02a30);
write_reg(color, 0x02a34);
itv->osd_info->palette_cur[regno] = color;
return 0;
}
if (regno >= 16)
return -EINVAL;
palette = info->pseudo_palette;
if (info->var.bits_per_pixel == 16) {
switch (info->var.green.length) {
case 4:
color = ((red & 0xf000) >> 4) |
((green & 0xf000) >> 8) |
((blue & 0xf000) >> 12);
break;
case 5:
color = ((red & 0xf800) >> 1) |
((green & 0xf800) >> 6) |
((blue & 0xf800) >> 11);
break;
case 6:
color = (red & 0xf800 ) |
((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11);
break;
}
}
palette[regno] = color;
return 0;
}
/* We don't really support blanking. All this does is enable or
disable the OSD. */
static int ivtvfb_blank(int blank_mode, struct fb_info *info)
{
struct ivtv *itv = (struct ivtv *)info->par;
IVTVFB_DEBUG_INFO("Set blanking mode : %d\n", blank_mode);
switch (blank_mode) {
case FB_BLANK_UNBLANK:
ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 1);
ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1);
break;
case FB_BLANK_NORMAL:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_VSYNC_SUSPEND:
ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0);
ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1);
break;
case FB_BLANK_POWERDOWN:
ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0);
break;
}
itv->osd_info->blank_cur = blank_mode;
return 0;
}
static const struct fb_ops ivtvfb_ops = {
.owner = THIS_MODULE,
.fb_write = ivtvfb_write,
.fb_check_var = ivtvfb_check_var,
.fb_set_par = ivtvfb_set_par,
.fb_setcolreg = ivtvfb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_cursor = NULL,
.fb_ioctl = ivtvfb_ioctl,
.fb_pan_display = ivtvfb_pan_display,
.fb_blank = ivtvfb_blank,
};
/* Restore hardware after firmware restart */
static void ivtvfb_restore(struct ivtv *itv)
{
struct osd_info *oi = itv->osd_info;
int i;
ivtvfb_set_var(itv, &oi->fbvar_cur);
ivtvfb_blank(oi->blank_cur, &oi->ivtvfb_info);
for (i = 0; i < 256; i++) {
write_reg(i, 0x02a30);
write_reg(oi->palette_cur[i], 0x02a34);
}
write_reg(oi->pan_cur, 0x02a0c);
}
/* Initialization */
/* Setup our initial video mode */
static int ivtvfb_init_vidmode(struct ivtv *itv)
{
struct osd_info *oi = itv->osd_info;
struct v4l2_rect start_window;
int max_height;
/* Color mode */
if (osd_depth != 8 && osd_depth != 16 && osd_depth != 32)
osd_depth = 8;
oi->bits_per_pixel = osd_depth;
oi->bytes_per_pixel = oi->bits_per_pixel / 8;
/* Horizontal size & position */
if (osd_xres > 720)
osd_xres = 720;
/* Must be a multiple of 4 for 8bpp & 2 for 16bpp */
if (osd_depth == 8)
osd_xres &= ~3;
else if (osd_depth == 16)
osd_xres &= ~1;
start_window.width = osd_xres ? osd_xres : 640;
/* Check horizontal start (osd_left). */
if (osd_left && osd_left + start_window.width > 721) {
IVTVFB_ERR("Invalid osd_left - assuming default\n");
osd_left = 0;
}
/* Hardware coords start at 0, user coords start at 1. */
osd_left--;
start_window.left = osd_left >= 0 ?
osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2);
oi->display_byte_stride =
start_window.width * oi->bytes_per_pixel;
/* Vertical size & position */
max_height = itv->is_out_50hz ? 576 : 480;
if (osd_yres > max_height)
osd_yres = max_height;
start_window.height = osd_yres ?
osd_yres : itv->is_out_50hz ? 480 : 400;
/* Check vertical start (osd_upper). */
if (osd_upper + start_window.height > max_height + 1) {
IVTVFB_ERR("Invalid osd_upper - assuming default\n");
osd_upper = 0;
}
/* Hardware coords start at 0, user coords start at 1. */
osd_upper--;
start_window.top = osd_upper >= 0 ? osd_upper : ((max_height - start_window.height) / 2);
oi->display_width = start_window.width;
oi->display_height = start_window.height;
/* Generate a valid fb_var_screeninfo */
oi->ivtvfb_defined.xres = oi->display_width;
oi->ivtvfb_defined.yres = oi->display_height;
oi->ivtvfb_defined.xres_virtual = oi->display_width;
oi->ivtvfb_defined.yres_virtual = oi->display_height;
oi->ivtvfb_defined.bits_per_pixel = oi->bits_per_pixel;
oi->ivtvfb_defined.vmode = (osd_laced ? FB_VMODE_INTERLACED : FB_VMODE_NONINTERLACED);
oi->ivtvfb_defined.left_margin = start_window.left + 1;
oi->ivtvfb_defined.upper_margin = start_window.top + 1;
oi->ivtvfb_defined.accel_flags = FB_ACCEL_NONE;
oi->ivtvfb_defined.nonstd = 0;
/* We've filled in the most data, let the usual mode check
routine fill in the rest. */
_ivtvfb_check_var(&oi->ivtvfb_defined, itv);
/* Generate valid fb_fix_screeninfo */
ivtvfb_get_fix(itv, &oi->ivtvfb_fix);
/* Generate valid fb_info */
oi->ivtvfb_info.node = -1;
oi->ivtvfb_info.flags = FBINFO_FLAG_DEFAULT;
oi->ivtvfb_info.par = itv;
oi->ivtvfb_info.var = oi->ivtvfb_defined;
oi->ivtvfb_info.fix = oi->ivtvfb_fix;
oi->ivtvfb_info.screen_base = (u8 __iomem *)oi->video_vbase;
oi->ivtvfb_info.fbops = &ivtvfb_ops;
/* Supply some monitor specs. Bogus values will do for now */
oi->ivtvfb_info.monspecs.hfmin = 8000;
oi->ivtvfb_info.monspecs.hfmax = 70000;
oi->ivtvfb_info.monspecs.vfmin = 10;
oi->ivtvfb_info.monspecs.vfmax = 100;
/* Allocate color map */
if (fb_alloc_cmap(&oi->ivtvfb_info.cmap, 256, 1)) {
IVTVFB_ERR("abort, unable to alloc cmap\n");
return -ENOMEM;
}
/* Allocate the pseudo palette */
oi->ivtvfb_info.pseudo_palette =
kmalloc_array(16, sizeof(u32), GFP_KERNEL|__GFP_NOWARN);
if (!oi->ivtvfb_info.pseudo_palette) {
IVTVFB_ERR("abort, unable to alloc pseudo palette\n");
return -ENOMEM;
}
return 0;
}
/* Find OSD buffer base & size. Add to mtrr. Zero osd buffer. */
static int ivtvfb_init_io(struct ivtv *itv)
{
struct osd_info *oi = itv->osd_info;
/* Find the largest power of two that maps the whole buffer */
int size_shift = 31;
mutex_lock(&itv->serialize_lock);
if (ivtv_init_on_first_open(itv)) {
mutex_unlock(&itv->serialize_lock);
IVTVFB_ERR("Failed to initialize ivtv\n");
return -ENXIO;
}
mutex_unlock(&itv->serialize_lock);
if (ivtvfb_get_framebuffer(itv, &oi->video_rbase,
&oi->video_buffer_size) < 0) {
IVTVFB_ERR("Firmware failed to respond\n");
return -EIO;
}
/* The osd buffer size depends on the number of video buffers allocated
on the PVR350 itself. For now we'll hardcode the smallest osd buffer
size to prevent any overlap. */
oi->video_buffer_size = 1704960;
oi->video_pbase = itv->base_addr + IVTV_DECODER_OFFSET + oi->video_rbase;
oi->video_vbase = itv->dec_mem + oi->video_rbase;
if (!oi->video_vbase) {
IVTVFB_ERR("abort, video memory 0x%x @ 0x%lx isn't mapped!\n",
oi->video_buffer_size, oi->video_pbase);
return -EIO;
}
IVTVFB_INFO("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
oi->video_pbase, oi->video_vbase,
oi->video_buffer_size / 1024);
while (!(oi->video_buffer_size & (1 << size_shift)))
size_shift--;
size_shift++;
oi->fb_start_aligned_physaddr = oi->video_pbase & ~((1 << size_shift) - 1);
oi->fb_end_aligned_physaddr = oi->video_pbase + oi->video_buffer_size;
oi->fb_end_aligned_physaddr += (1 << size_shift) - 1;
oi->fb_end_aligned_physaddr &= ~((1 << size_shift) - 1);
oi->wc_cookie = arch_phys_wc_add(oi->fb_start_aligned_physaddr,
oi->fb_end_aligned_physaddr -
oi->fb_start_aligned_physaddr);
/* Blank the entire osd. */
memset_io(oi->video_vbase, 0, oi->video_buffer_size);
return 0;
}
/* Release any memory we've grabbed & remove mtrr entry */
static void ivtvfb_release_buffers (struct ivtv *itv)
{
struct osd_info *oi = itv->osd_info;
/* Release cmap */
if (oi->ivtvfb_info.cmap.len)
fb_dealloc_cmap(&oi->ivtvfb_info.cmap);
/* Release pseudo palette */
kfree(oi->ivtvfb_info.pseudo_palette);
arch_phys_wc_del(oi->wc_cookie);
kfree(oi);
itv->osd_info = NULL;
}
/* Initialize the specified card */
static int ivtvfb_init_card(struct ivtv *itv)
{
int rc;
#ifdef CONFIG_X86_64
if (pat_enabled()) {
if (ivtvfb_force_pat) {
pr_info("PAT is enabled. Write-combined framebuffer caching will be disabled.\n");
pr_info("To enable caching, boot with nopat kernel parameter\n");
} else {
pr_warn("ivtvfb needs PAT disabled for write-combined framebuffer caching.\n");
pr_warn("Boot with nopat kernel parameter to use caching, or use the\n");
pr_warn("force_pat module parameter to run with caching disabled\n");
return -ENODEV;
}
}
#endif
if (itv->osd_info) {
IVTVFB_ERR("Card %d already initialised\n", ivtvfb_card_id);
return -EBUSY;
}
itv->osd_info = kzalloc(sizeof(struct osd_info),
GFP_KERNEL|__GFP_NOWARN);
if (itv->osd_info == NULL) {
IVTVFB_ERR("Failed to allocate memory for osd_info\n");
return -ENOMEM;
}
/* Find & setup the OSD buffer */
rc = ivtvfb_init_io(itv);
if (rc) {
ivtvfb_release_buffers(itv);
return rc;
}
/* Set the startup video mode information */
if ((rc = ivtvfb_init_vidmode(itv))) {
ivtvfb_release_buffers(itv);
return rc;
}
/* Register the framebuffer */
if (register_framebuffer(&itv->osd_info->ivtvfb_info) < 0) {
ivtvfb_release_buffers(itv);
return -EINVAL;
}
itv->osd_video_pbase = itv->osd_info->video_pbase;
/* Set the card to the requested mode */
ivtvfb_set_par(&itv->osd_info->ivtvfb_info);
/* Set color 0 to black */
write_reg(0, 0x02a30);
write_reg(0, 0x02a34);
/* Enable the osd */
ivtvfb_blank(FB_BLANK_UNBLANK, &itv->osd_info->ivtvfb_info);
/* Enable restart */
itv->ivtvfb_restore = ivtvfb_restore;
/* Allocate DMA */
ivtv_udma_alloc(itv);
itv->streams[IVTV_DEC_STREAM_TYPE_YUV].vdev.device_caps |=
V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
itv->streams[IVTV_DEC_STREAM_TYPE_MPG].vdev.device_caps |=
V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
itv->v4l2_cap |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
return 0;
}
static int __init ivtvfb_callback_init(struct device *dev, void *p)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev);
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
if (ivtvfb_init_card(itv) == 0) {
IVTVFB_INFO("Framebuffer registered on %s\n",
itv->v4l2_dev.name);
(*(int *)p)++;
}
}
return 0;
}
static int ivtvfb_callback_cleanup(struct device *dev, void *p)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev);
struct osd_info *oi = itv->osd_info;
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
itv->streams[IVTV_DEC_STREAM_TYPE_YUV].vdev.device_caps &=
~V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
itv->streams[IVTV_DEC_STREAM_TYPE_MPG].vdev.device_caps &=
~V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
itv->v4l2_cap &= ~V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
unregister_framebuffer(&itv->osd_info->ivtvfb_info);
IVTVFB_INFO("Unregister framebuffer %d\n", itv->instance);
itv->ivtvfb_restore = NULL;
ivtvfb_blank(FB_BLANK_VSYNC_SUSPEND, &oi->ivtvfb_info);
ivtvfb_release_buffers(itv);
itv->osd_video_pbase = 0;
}
return 0;
}
static int __init ivtvfb_init(void)
{
struct device_driver *drv;
int registered = 0;
int err;
if (ivtvfb_card_id < -1 || ivtvfb_card_id >= IVTV_MAX_CARDS) {
pr_err("ivtvfb_card_id parameter is out of range (valid range: -1 - %d)\n",
IVTV_MAX_CARDS - 1);
return -EINVAL;
}
drv = driver_find("ivtv", &pci_bus_type);
err = driver_for_each_device(drv, NULL, &registered, ivtvfb_callback_init);
(void)err; /* suppress compiler warning */
if (!registered) {
pr_err("no cards found\n");
return -ENODEV;
}
return 0;
}
static void ivtvfb_cleanup(void)
{
struct device_driver *drv;
int err;
pr_info("Unloading framebuffer module\n");
drv = driver_find("ivtv", &pci_bus_type);
err = driver_for_each_device(drv, NULL, NULL, ivtvfb_callback_cleanup);
(void)err; /* suppress compiler warning */
}
module_init(ivtvfb_init);
module_exit(ivtvfb_cleanup);