forked from luck/tmp_suning_uos_patched
7992db7cb9
The pwm-fan driver stops the fan in suspend but leaves the fan on in shutdown. It seems strange to leave the fan on in shutdown because there is no use case in my mind and the gpio-fan driver on the other hand stops in shutdown. This change turns off the fan in shutdown. If anyone complains then we'll add an optional property to switch the behavior. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kamil Debski <kamil@wypas.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/1579534344-11694-1-git-send-email-akinobu.mita@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
482 lines
10 KiB
C
482 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* pwm-fan.c - Hwmon driver for fans connected to PWM lines.
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
*
|
|
* Author: Kamil Debski <k.debski@samsung.com>
|
|
*/
|
|
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/timer.h>
|
|
|
|
#define MAX_PWM 255
|
|
|
|
struct pwm_fan_ctx {
|
|
struct mutex lock;
|
|
struct pwm_device *pwm;
|
|
struct regulator *reg_en;
|
|
|
|
int irq;
|
|
atomic_t pulses;
|
|
unsigned int rpm;
|
|
u8 pulses_per_revolution;
|
|
ktime_t sample_start;
|
|
struct timer_list rpm_timer;
|
|
|
|
unsigned int pwm_value;
|
|
unsigned int pwm_fan_state;
|
|
unsigned int pwm_fan_max_state;
|
|
unsigned int *pwm_fan_cooling_levels;
|
|
struct thermal_cooling_device *cdev;
|
|
};
|
|
|
|
/* This handler assumes self resetting edge triggered interrupt. */
|
|
static irqreturn_t pulse_handler(int irq, void *dev_id)
|
|
{
|
|
struct pwm_fan_ctx *ctx = dev_id;
|
|
|
|
atomic_inc(&ctx->pulses);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sample_timer(struct timer_list *t)
|
|
{
|
|
struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer);
|
|
int pulses;
|
|
u64 tmp;
|
|
|
|
pulses = atomic_read(&ctx->pulses);
|
|
atomic_sub(pulses, &ctx->pulses);
|
|
tmp = (u64)pulses * ktime_ms_delta(ktime_get(), ctx->sample_start) * 60;
|
|
do_div(tmp, ctx->pulses_per_revolution * 1000);
|
|
ctx->rpm = tmp;
|
|
|
|
ctx->sample_start = ktime_get();
|
|
mod_timer(&ctx->rpm_timer, jiffies + HZ);
|
|
}
|
|
|
|
static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
|
|
{
|
|
unsigned long period;
|
|
int ret = 0;
|
|
struct pwm_state state = { };
|
|
|
|
mutex_lock(&ctx->lock);
|
|
if (ctx->pwm_value == pwm)
|
|
goto exit_set_pwm_err;
|
|
|
|
pwm_init_state(ctx->pwm, &state);
|
|
period = ctx->pwm->args.period;
|
|
state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
|
|
state.enabled = pwm ? true : false;
|
|
|
|
ret = pwm_apply_state(ctx->pwm, &state);
|
|
if (!ret)
|
|
ctx->pwm_value = pwm;
|
|
exit_set_pwm_err:
|
|
mutex_unlock(&ctx->lock);
|
|
return ret;
|
|
}
|
|
|
|
static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ctx->pwm_fan_max_state; ++i)
|
|
if (pwm < ctx->pwm_fan_cooling_levels[i + 1])
|
|
break;
|
|
|
|
ctx->pwm_fan_state = i;
|
|
}
|
|
|
|
static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
|
unsigned long pwm;
|
|
int ret;
|
|
|
|
if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM)
|
|
return -EINVAL;
|
|
|
|
ret = __set_pwm(ctx, pwm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pwm_fan_update_state(ctx, pwm);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%u\n", ctx->pwm_value);
|
|
}
|
|
|
|
static ssize_t rpm_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%u\n", ctx->rpm);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_input, rpm, 0);
|
|
|
|
static struct attribute *pwm_fan_attrs[] = {
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t pwm_fan_attrs_visible(struct kobject *kobj, struct attribute *a,
|
|
int n)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
|
|
|
/* Hide fan_input in case no interrupt is available */
|
|
if (n == 1 && ctx->irq <= 0)
|
|
return 0;
|
|
|
|
return a->mode;
|
|
}
|
|
|
|
static const struct attribute_group pwm_fan_group = {
|
|
.attrs = pwm_fan_attrs,
|
|
.is_visible = pwm_fan_attrs_visible,
|
|
};
|
|
|
|
static const struct attribute_group *pwm_fan_groups[] = {
|
|
&pwm_fan_group,
|
|
NULL,
|
|
};
|
|
|
|
/* thermal cooling device callbacks */
|
|
static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *state)
|
|
{
|
|
struct pwm_fan_ctx *ctx = cdev->devdata;
|
|
|
|
if (!ctx)
|
|
return -EINVAL;
|
|
|
|
*state = ctx->pwm_fan_max_state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_fan_get_cur_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *state)
|
|
{
|
|
struct pwm_fan_ctx *ctx = cdev->devdata;
|
|
|
|
if (!ctx)
|
|
return -EINVAL;
|
|
|
|
*state = ctx->pwm_fan_state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
pwm_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
|
|
{
|
|
struct pwm_fan_ctx *ctx = cdev->devdata;
|
|
int ret;
|
|
|
|
if (!ctx || (state > ctx->pwm_fan_max_state))
|
|
return -EINVAL;
|
|
|
|
if (state == ctx->pwm_fan_state)
|
|
return 0;
|
|
|
|
ret = __set_pwm(ctx, ctx->pwm_fan_cooling_levels[state]);
|
|
if (ret) {
|
|
dev_err(&cdev->device, "Cannot set pwm!\n");
|
|
return ret;
|
|
}
|
|
|
|
ctx->pwm_fan_state = state;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
|
|
.get_max_state = pwm_fan_get_max_state,
|
|
.get_cur_state = pwm_fan_get_cur_state,
|
|
.set_cur_state = pwm_fan_set_cur_state,
|
|
};
|
|
|
|
static int pwm_fan_of_get_cooling_data(struct device *dev,
|
|
struct pwm_fan_ctx *ctx)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
int num, i, ret;
|
|
|
|
if (!of_find_property(np, "cooling-levels", NULL))
|
|
return 0;
|
|
|
|
ret = of_property_count_u32_elems(np, "cooling-levels");
|
|
if (ret <= 0) {
|
|
dev_err(dev, "Wrong data!\n");
|
|
return ret ? : -EINVAL;
|
|
}
|
|
|
|
num = ret;
|
|
ctx->pwm_fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32),
|
|
GFP_KERNEL);
|
|
if (!ctx->pwm_fan_cooling_levels)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32_array(np, "cooling-levels",
|
|
ctx->pwm_fan_cooling_levels, num);
|
|
if (ret) {
|
|
dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if (ctx->pwm_fan_cooling_levels[i] > MAX_PWM) {
|
|
dev_err(dev, "PWM fan state[%d]:%d > %d\n", i,
|
|
ctx->pwm_fan_cooling_levels[i], MAX_PWM);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ctx->pwm_fan_max_state = num - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pwm_fan_regulator_disable(void *data)
|
|
{
|
|
regulator_disable(data);
|
|
}
|
|
|
|
static void pwm_fan_pwm_disable(void *__ctx)
|
|
{
|
|
struct pwm_fan_ctx *ctx = __ctx;
|
|
pwm_disable(ctx->pwm);
|
|
del_timer_sync(&ctx->rpm_timer);
|
|
}
|
|
|
|
static int pwm_fan_probe(struct platform_device *pdev)
|
|
{
|
|
struct thermal_cooling_device *cdev;
|
|
struct device *dev = &pdev->dev;
|
|
struct pwm_fan_ctx *ctx;
|
|
struct device *hwmon;
|
|
int ret;
|
|
struct pwm_state state = { };
|
|
u32 ppr = 2;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&ctx->lock);
|
|
|
|
ctx->pwm = devm_of_pwm_get(dev, dev->of_node, NULL);
|
|
if (IS_ERR(ctx->pwm)) {
|
|
ret = PTR_ERR(ctx->pwm);
|
|
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Could not get PWM: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ctx);
|
|
|
|
ctx->irq = platform_get_irq_optional(pdev, 0);
|
|
if (ctx->irq == -EPROBE_DEFER)
|
|
return ctx->irq;
|
|
|
|
ctx->reg_en = devm_regulator_get_optional(dev, "fan");
|
|
if (IS_ERR(ctx->reg_en)) {
|
|
if (PTR_ERR(ctx->reg_en) != -ENODEV)
|
|
return PTR_ERR(ctx->reg_en);
|
|
|
|
ctx->reg_en = NULL;
|
|
} else {
|
|
ret = regulator_enable(ctx->reg_en);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable fan supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = devm_add_action_or_reset(dev, pwm_fan_regulator_disable,
|
|
ctx->reg_en);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ctx->pwm_value = MAX_PWM;
|
|
|
|
/* Set duty cycle to maximum allowed and enable PWM output */
|
|
pwm_init_state(ctx->pwm, &state);
|
|
state.duty_cycle = ctx->pwm->args.period - 1;
|
|
state.enabled = true;
|
|
|
|
ret = pwm_apply_state(ctx->pwm, &state);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to configure PWM: %d\n", ret);
|
|
return ret;
|
|
}
|
|
timer_setup(&ctx->rpm_timer, sample_timer, 0);
|
|
ret = devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
of_property_read_u32(dev->of_node, "pulses-per-revolution", &ppr);
|
|
ctx->pulses_per_revolution = ppr;
|
|
if (!ctx->pulses_per_revolution) {
|
|
dev_err(dev, "pulses-per-revolution can't be zero.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ctx->irq > 0) {
|
|
ret = devm_request_irq(dev, ctx->irq, pulse_handler, 0,
|
|
pdev->name, ctx);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request interrupt: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ctx->sample_start = ktime_get();
|
|
mod_timer(&ctx->rpm_timer, jiffies + HZ);
|
|
}
|
|
|
|
hwmon = devm_hwmon_device_register_with_groups(dev, "pwmfan",
|
|
ctx, pwm_fan_groups);
|
|
if (IS_ERR(hwmon)) {
|
|
dev_err(dev, "Failed to register hwmon device\n");
|
|
return PTR_ERR(hwmon);
|
|
}
|
|
|
|
ret = pwm_fan_of_get_cooling_data(dev, ctx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctx->pwm_fan_state = ctx->pwm_fan_max_state;
|
|
if (IS_ENABLED(CONFIG_THERMAL)) {
|
|
cdev = devm_thermal_of_cooling_device_register(dev,
|
|
dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
|
|
if (IS_ERR(cdev)) {
|
|
ret = PTR_ERR(cdev);
|
|
dev_err(dev,
|
|
"Failed to register pwm-fan as cooling device: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
ctx->cdev = cdev;
|
|
thermal_cdev_update(cdev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_fan_disable(struct device *dev)
|
|
{
|
|
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
|
struct pwm_args args;
|
|
int ret;
|
|
|
|
pwm_get_args(ctx->pwm, &args);
|
|
|
|
if (ctx->pwm_value) {
|
|
ret = pwm_config(ctx->pwm, 0, args.period);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pwm_disable(ctx->pwm);
|
|
}
|
|
|
|
if (ctx->reg_en) {
|
|
ret = regulator_disable(ctx->reg_en);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to disable fan supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pwm_fan_shutdown(struct platform_device *pdev)
|
|
{
|
|
pwm_fan_disable(&pdev->dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pwm_fan_suspend(struct device *dev)
|
|
{
|
|
return pwm_fan_disable(dev);
|
|
}
|
|
|
|
static int pwm_fan_resume(struct device *dev)
|
|
{
|
|
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
|
struct pwm_args pargs;
|
|
unsigned long duty;
|
|
int ret;
|
|
|
|
if (ctx->reg_en) {
|
|
ret = regulator_enable(ctx->reg_en);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable fan supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (ctx->pwm_value == 0)
|
|
return 0;
|
|
|
|
pwm_get_args(ctx->pwm, &pargs);
|
|
duty = DIV_ROUND_UP(ctx->pwm_value * (pargs.period - 1), MAX_PWM);
|
|
ret = pwm_config(ctx->pwm, duty, pargs.period);
|
|
if (ret)
|
|
return ret;
|
|
return pwm_enable(ctx->pwm);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume);
|
|
|
|
static const struct of_device_id of_pwm_fan_match[] = {
|
|
{ .compatible = "pwm-fan", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
|
|
|
|
static struct platform_driver pwm_fan_driver = {
|
|
.probe = pwm_fan_probe,
|
|
.shutdown = pwm_fan_shutdown,
|
|
.driver = {
|
|
.name = "pwm-fan",
|
|
.pm = &pwm_fan_pm,
|
|
.of_match_table = of_pwm_fan_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(pwm_fan_driver);
|
|
|
|
MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
|
|
MODULE_ALIAS("platform:pwm-fan");
|
|
MODULE_DESCRIPTION("PWM FAN driver");
|
|
MODULE_LICENSE("GPL");
|