forked from luck/tmp_suning_uos_patched
c65c9bc3ef
There are several pretty much unfixable races in the old ldisc code, especially with respect to pty behaviour and also to hangup. It's easier to rewrite the code than simply try and patch it up. This patch - splits the ldisc from the tty (so we will be able to refcount it more cleanly later) - introduces a mutex lock for ldisc changing on an active device - fixes the complete mess that hangup caused - implements hopefully correct setldisc/close/hangup locking There are still some problems around pty pairs that have always been there but at least it is now possible to understand the code and fix further problems. This fixes the following known bugs - hang up can leak ldisc references - hang up may not call open/close on ldisc in a matched way - pty/tty pairs can deadlock during an ldisc change - reading the ldisc proc files can cause every ldisc to be loaded and probably a few other of the mysterious ldisc race reports. I'm sure it also adds the odd new one. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3200 lines
101 KiB
C
3200 lines
101 KiB
C
/*
|
|
*
|
|
* (c) 1999 by Computone Corporation
|
|
*
|
|
********************************************************************************
|
|
*
|
|
* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
|
|
* serial I/O controllers.
|
|
*
|
|
* DESCRIPTION: Mainline code for the device driver
|
|
*
|
|
*******************************************************************************/
|
|
// ToDo:
|
|
//
|
|
// Fix the immediate DSS_NOW problem.
|
|
// Work over the channel stats return logic in ip2_ipl_ioctl so they
|
|
// make sense for all 256 possible channels and so the user space
|
|
// utilities will compile and work properly.
|
|
//
|
|
// Done:
|
|
//
|
|
// 1.2.14 /\/\|=mhw=|\/\/
|
|
// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts.
|
|
// Changed the definition of ip2trace to be more consistent with kernel style
|
|
// Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates
|
|
//
|
|
// 1.2.13 /\/\|=mhw=|\/\/
|
|
// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform
|
|
// to agreed devfs serial device naming convention.
|
|
//
|
|
// 1.2.12 /\/\|=mhw=|\/\/
|
|
// Cleaned up some remove queue cut and paste errors
|
|
//
|
|
// 1.2.11 /\/\|=mhw=|\/\/
|
|
// Clean up potential NULL pointer dereferences
|
|
// Clean up devfs registration
|
|
// Add kernel command line parsing for io and irq
|
|
// Compile defaults for io and irq are now set in ip2.c not ip2.h!
|
|
// Reworked poll_only hack for explicit parameter setting
|
|
// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
|
|
// Merged ip2_loadmain and old_ip2_init
|
|
// Converted all instances of interruptible_sleep_on into queue calls
|
|
// Most of these had no race conditions but better to clean up now
|
|
//
|
|
// 1.2.10 /\/\|=mhw=|\/\/
|
|
// Fixed the bottom half interrupt handler and enabled USE_IQI
|
|
// to split the interrupt handler into a formal top-half / bottom-half
|
|
// Fixed timing window on high speed processors that queued messages to
|
|
// the outbound mail fifo faster than the board could handle.
|
|
//
|
|
// 1.2.9
|
|
// Four box EX was barfing on >128k kmalloc, made structure smaller by
|
|
// reducing output buffer size
|
|
//
|
|
// 1.2.8
|
|
// Device file system support (MHW)
|
|
//
|
|
// 1.2.7
|
|
// Fixed
|
|
// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules
|
|
//
|
|
// 1.2.6
|
|
//Fixes DCD problems
|
|
// DCD was not reported when CLOCAL was set on call to TIOCMGET
|
|
//
|
|
//Enhancements:
|
|
// TIOCMGET requests and waits for status return
|
|
// No DSS interrupts enabled except for DCD when needed
|
|
//
|
|
// For internal use only
|
|
//
|
|
//#define IP2DEBUG_INIT
|
|
//#define IP2DEBUG_OPEN
|
|
//#define IP2DEBUG_WRITE
|
|
//#define IP2DEBUG_READ
|
|
//#define IP2DEBUG_IOCTL
|
|
//#define IP2DEBUG_IPL
|
|
|
|
//#define IP2DEBUG_TRACE
|
|
//#define DEBUG_FIFO
|
|
|
|
/************/
|
|
/* Includes */
|
|
/************/
|
|
|
|
#include <linux/ctype.h>
|
|
#include <linux/string.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/major.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/device.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/cdk.h>
|
|
#include <linux/comstats.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "ip2types.h"
|
|
#include "ip2trace.h"
|
|
#include "ip2ioctl.h"
|
|
#include "ip2.h"
|
|
#include "i2ellis.h"
|
|
#include "i2lib.h"
|
|
|
|
/*****************
|
|
* /proc/ip2mem *
|
|
*****************/
|
|
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
static const struct file_operations ip2mem_proc_fops;
|
|
static const struct file_operations ip2_proc_fops;
|
|
|
|
/********************/
|
|
/* Type Definitions */
|
|
/********************/
|
|
|
|
/*************/
|
|
/* Constants */
|
|
/*************/
|
|
|
|
/* String constants to identify ourselves */
|
|
static const char pcName[] = "Computone IntelliPort Plus multiport driver";
|
|
static const char pcVersion[] = "1.2.14";
|
|
|
|
/* String constants for port names */
|
|
static const char pcDriver_name[] = "ip2";
|
|
static const char pcIpl[] = "ip2ipl";
|
|
|
|
/***********************/
|
|
/* Function Prototypes */
|
|
/***********************/
|
|
|
|
/* Global module entry functions */
|
|
|
|
/* Private (static) functions */
|
|
static int ip2_open(PTTY, struct file *);
|
|
static void ip2_close(PTTY, struct file *);
|
|
static int ip2_write(PTTY, const unsigned char *, int);
|
|
static int ip2_putchar(PTTY, unsigned char);
|
|
static void ip2_flush_chars(PTTY);
|
|
static int ip2_write_room(PTTY);
|
|
static int ip2_chars_in_buf(PTTY);
|
|
static void ip2_flush_buffer(PTTY);
|
|
static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
|
|
static void ip2_set_termios(PTTY, struct ktermios *);
|
|
static void ip2_set_line_discipline(PTTY);
|
|
static void ip2_throttle(PTTY);
|
|
static void ip2_unthrottle(PTTY);
|
|
static void ip2_stop(PTTY);
|
|
static void ip2_start(PTTY);
|
|
static void ip2_hangup(PTTY);
|
|
static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
|
|
static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
|
|
static void set_irq(int, int);
|
|
static void ip2_interrupt_bh(struct work_struct *work);
|
|
static irqreturn_t ip2_interrupt(int irq, void *dev_id);
|
|
static void ip2_poll(unsigned long arg);
|
|
static inline void service_all_boards(void);
|
|
static void do_input(struct work_struct *);
|
|
static void do_status(struct work_struct *);
|
|
|
|
static void ip2_wait_until_sent(PTTY,int);
|
|
|
|
static void set_params (i2ChanStrPtr, struct ktermios *);
|
|
static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
|
|
static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
|
|
|
|
static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
|
|
static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
|
|
static long ip2_ipl_ioctl(struct file *, UINT, ULONG);
|
|
static int ip2_ipl_open(struct inode *, struct file *);
|
|
|
|
static int DumpTraceBuffer(char __user *, int);
|
|
static int DumpFifoBuffer( char __user *, int);
|
|
|
|
static void ip2_init_board(int, const struct firmware *);
|
|
static unsigned short find_eisa_board(int);
|
|
|
|
/***************/
|
|
/* Static Data */
|
|
/***************/
|
|
|
|
static struct tty_driver *ip2_tty_driver;
|
|
|
|
/* Here, then is a table of board pointers which the interrupt routine should
|
|
* scan through to determine who it must service.
|
|
*/
|
|
static unsigned short i2nBoards; // Number of boards here
|
|
|
|
static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS];
|
|
|
|
static i2ChanStrPtr DevTable[IP2_MAX_PORTS];
|
|
//DevTableMem just used to save addresses for kfree
|
|
static void *DevTableMem[IP2_MAX_BOARDS];
|
|
|
|
/* This is the driver descriptor for the ip2ipl device, which is used to
|
|
* download the loadware to the boards.
|
|
*/
|
|
static const struct file_operations ip2_ipl = {
|
|
.owner = THIS_MODULE,
|
|
.read = ip2_ipl_read,
|
|
.write = ip2_ipl_write,
|
|
.unlocked_ioctl = ip2_ipl_ioctl,
|
|
.open = ip2_ipl_open,
|
|
};
|
|
|
|
static unsigned long irq_counter;
|
|
static unsigned long bh_counter;
|
|
|
|
// Use immediate queue to service interrupts
|
|
#define USE_IQI
|
|
//#define USE_IQ // PCI&2.2 needs work
|
|
|
|
/* The timer_list entry for our poll routine. If interrupt operation is not
|
|
* selected, the board is serviced periodically to see if anything needs doing.
|
|
*/
|
|
#define POLL_TIMEOUT (jiffies + 1)
|
|
static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
|
|
|
|
#ifdef IP2DEBUG_TRACE
|
|
/* Trace (debug) buffer data */
|
|
#define TRACEMAX 1000
|
|
static unsigned long tracebuf[TRACEMAX];
|
|
static int tracestuff;
|
|
static int tracestrip;
|
|
static int tracewrap;
|
|
#endif
|
|
|
|
/**********/
|
|
/* Macros */
|
|
/**********/
|
|
|
|
#if defined(MODULE) && defined(IP2DEBUG_OPEN)
|
|
#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
|
|
tty->name,(pCh->flags), \
|
|
tty->count,/*GET_USE_COUNT(module)*/0,s)
|
|
#else
|
|
#define DBG_CNT(s)
|
|
#endif
|
|
|
|
/********/
|
|
/* Code */
|
|
/********/
|
|
|
|
#include "i2ellis.c" /* Extremely low-level interface services */
|
|
#include "i2cmd.c" /* Standard loadware command definitions */
|
|
#include "i2lib.c" /* High level interface services */
|
|
|
|
/* Configuration area for modprobe */
|
|
|
|
MODULE_AUTHOR("Doug McNash");
|
|
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int poll_only;
|
|
|
|
static int Eisa_irq;
|
|
static int Eisa_slot;
|
|
|
|
static int iindx;
|
|
static char rirqs[IP2_MAX_BOARDS];
|
|
static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
|
|
|
|
/* Note: Add compiled in defaults to these arrays, not to the structure
|
|
in ip2.h any longer. That structure WILL get overridden
|
|
by these values, or command line values, or insmod values!!! =mhw=
|
|
*/
|
|
static int io[IP2_MAX_BOARDS];
|
|
static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
|
|
|
|
MODULE_AUTHOR("Doug McNash");
|
|
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
|
|
module_param_array(irq, int, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards");
|
|
module_param_array(io, int, NULL, 0);
|
|
MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
|
|
module_param(poll_only, bool, 0);
|
|
MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
|
|
|
|
/* for sysfs class support */
|
|
static struct class *ip2_class;
|
|
|
|
/* Some functions to keep track of what irqs we have */
|
|
|
|
static int __init is_valid_irq(int irq)
|
|
{
|
|
int *i = Valid_Irqs;
|
|
|
|
while (*i != 0 && *i != irq)
|
|
i++;
|
|
|
|
return *i;
|
|
}
|
|
|
|
static void __init mark_requested_irq(char irq)
|
|
{
|
|
rirqs[iindx++] = irq;
|
|
}
|
|
|
|
static int __exit clear_requested_irq(char irq)
|
|
{
|
|
int i;
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
if (rirqs[i] == irq) {
|
|
rirqs[i] = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int have_requested_irq(char irq)
|
|
{
|
|
/* array init to zeros so 0 irq will not be requested as a side
|
|
* effect */
|
|
int i;
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i)
|
|
if (rirqs[i] == irq)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: cleanup_module() */
|
|
/* Parameters: None */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* This is a required entry point for an installable module. It has to return */
|
|
/* the device and the driver to a passive state. It should not be necessary */
|
|
/* to reset the board fully, especially as the loadware is downloaded */
|
|
/* externally rather than in the driver. We just want to disable the board */
|
|
/* and clear the loadware to a reset state. To allow this there has to be a */
|
|
/* way to detect whether the board has the loadware running at init time to */
|
|
/* handle subsequent installations of the driver. All memory allocated by the */
|
|
/* driver should be returned since it may be unloaded from memory. */
|
|
/******************************************************************************/
|
|
static void __exit ip2_cleanup_module(void)
|
|
{
|
|
int err;
|
|
int i;
|
|
|
|
del_timer_sync(&PollTimer);
|
|
|
|
/* Reset the boards we have. */
|
|
for (i = 0; i < IP2_MAX_BOARDS; i++)
|
|
if (i2BoardPtrTable[i])
|
|
iiReset(i2BoardPtrTable[i]);
|
|
|
|
/* The following is done at most once, if any boards were installed. */
|
|
for (i = 0; i < IP2_MAX_BOARDS; i++) {
|
|
if (i2BoardPtrTable[i]) {
|
|
iiResetDelay(i2BoardPtrTable[i]);
|
|
/* free io addresses and Tibet */
|
|
release_region(ip2config.addr[i], 8);
|
|
device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
|
|
device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR,
|
|
4 * i + 1));
|
|
}
|
|
/* Disable and remove interrupt handler. */
|
|
if (ip2config.irq[i] > 0 &&
|
|
have_requested_irq(ip2config.irq[i])) {
|
|
free_irq(ip2config.irq[i], (void *)&pcName);
|
|
clear_requested_irq(ip2config.irq[i]);
|
|
}
|
|
}
|
|
class_destroy(ip2_class);
|
|
err = tty_unregister_driver(ip2_tty_driver);
|
|
if (err)
|
|
printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n",
|
|
err);
|
|
put_tty_driver(ip2_tty_driver);
|
|
unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
|
|
remove_proc_entry("ip2mem", NULL);
|
|
|
|
/* free memory */
|
|
for (i = 0; i < IP2_MAX_BOARDS; i++) {
|
|
void *pB;
|
|
#ifdef CONFIG_PCI
|
|
if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
|
|
pci_disable_device(ip2config.pci_dev[i]);
|
|
pci_dev_put(ip2config.pci_dev[i]);
|
|
ip2config.pci_dev[i] = NULL;
|
|
}
|
|
#endif
|
|
pB = i2BoardPtrTable[i];
|
|
if (pB != NULL) {
|
|
kfree(pB);
|
|
i2BoardPtrTable[i] = NULL;
|
|
}
|
|
if (DevTableMem[i] != NULL) {
|
|
kfree(DevTableMem[i]);
|
|
DevTableMem[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
module_exit(ip2_cleanup_module);
|
|
|
|
static const struct tty_operations ip2_ops = {
|
|
.open = ip2_open,
|
|
.close = ip2_close,
|
|
.write = ip2_write,
|
|
.put_char = ip2_putchar,
|
|
.flush_chars = ip2_flush_chars,
|
|
.write_room = ip2_write_room,
|
|
.chars_in_buffer = ip2_chars_in_buf,
|
|
.flush_buffer = ip2_flush_buffer,
|
|
.ioctl = ip2_ioctl,
|
|
.throttle = ip2_throttle,
|
|
.unthrottle = ip2_unthrottle,
|
|
.set_termios = ip2_set_termios,
|
|
.set_ldisc = ip2_set_line_discipline,
|
|
.stop = ip2_stop,
|
|
.start = ip2_start,
|
|
.hangup = ip2_hangup,
|
|
.tiocmget = ip2_tiocmget,
|
|
.tiocmset = ip2_tiocmset,
|
|
.proc_fops = &ip2_proc_fops,
|
|
};
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_loadmain() */
|
|
/* Parameters: irq, io from command line of insmod et. al. */
|
|
/* pointer to fip firmware and firmware size for boards */
|
|
/* Returns: Success (0) */
|
|
/* */
|
|
/* Description: */
|
|
/* This was the required entry point for all drivers (now in ip2.c) */
|
|
/* It performs all */
|
|
/* initialisation of the devices and driver structures, and registers itself */
|
|
/* with the relevant kernel modules. */
|
|
/******************************************************************************/
|
|
/* IRQF_DISABLED - if set blocks all interrupts else only this line */
|
|
/* IRQF_SHARED - for shared irq PCI or maybe EISA only */
|
|
/* SA_RANDOM - can be source for cert. random number generators */
|
|
#define IP2_SA_FLAGS 0
|
|
|
|
|
|
static const struct firmware *ip2_request_firmware(void)
|
|
{
|
|
struct platform_device *pdev;
|
|
const struct firmware *fw;
|
|
|
|
pdev = platform_device_register_simple("ip2", 0, NULL, 0);
|
|
if (IS_ERR(pdev)) {
|
|
printk(KERN_ERR "Failed to register platform device for ip2\n");
|
|
return NULL;
|
|
}
|
|
if (request_firmware(&fw, "intelliport2.bin", &pdev->dev)) {
|
|
printk(KERN_ERR "Failed to load firmware 'intelliport2.bin'\n");
|
|
fw = NULL;
|
|
}
|
|
platform_device_unregister(pdev);
|
|
return fw;
|
|
}
|
|
|
|
#ifndef MODULE
|
|
/******************************************************************************
|
|
* ip2_setup:
|
|
* str: kernel command line string
|
|
*
|
|
* Can't autoprobe the boards so user must specify configuration on
|
|
* kernel command line. Sane people build it modular but the others
|
|
* come here.
|
|
*
|
|
* Alternating pairs of io,irq for up to 4 boards.
|
|
* ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
|
|
*
|
|
* io=0 => No board
|
|
* io=1 => PCI
|
|
* io=2 => EISA
|
|
* else => ISA I/O address
|
|
*
|
|
* irq=0 or invalid for ISA will revert to polling mode
|
|
*
|
|
* Any value = -1, do not overwrite compiled in value.
|
|
*
|
|
******************************************************************************/
|
|
static int __init ip2_setup(char *str)
|
|
{
|
|
int j, ints[10]; /* 4 boards, 2 parameters + 2 */
|
|
unsigned int i;
|
|
|
|
str = get_options(str, ARRAY_SIZE(ints), ints);
|
|
|
|
for (i = 0, j = 1; i < 4; i++) {
|
|
if (j > ints[0])
|
|
break;
|
|
if (ints[j] >= 0)
|
|
io[i] = ints[j];
|
|
j++;
|
|
if (j > ints[0])
|
|
break;
|
|
if (ints[j] >= 0)
|
|
irq[i] = ints[j];
|
|
j++;
|
|
}
|
|
return 1;
|
|
}
|
|
__setup("ip2=", ip2_setup);
|
|
#endif /* !MODULE */
|
|
|
|
static int __init ip2_loadmain(void)
|
|
{
|
|
int i, j, box;
|
|
int err = 0;
|
|
i2eBordStrPtr pB = NULL;
|
|
int rc = -1;
|
|
struct pci_dev *pdev = NULL;
|
|
const struct firmware *fw = NULL;
|
|
|
|
if (poll_only) {
|
|
/* Hard lock the interrupts to zero */
|
|
irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
|
|
}
|
|
|
|
ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
|
|
|
|
/* process command line arguments to modprobe or
|
|
insmod i.e. iop & irqp */
|
|
/* irqp and iop should ALWAYS be specified now... But we check
|
|
them individually just to be sure, anyways... */
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
ip2config.addr[i] = io[i];
|
|
if (irq[i] >= 0)
|
|
ip2config.irq[i] = irq[i];
|
|
else
|
|
ip2config.irq[i] = 0;
|
|
/* This is a little bit of a hack. If poll_only=1 on command
|
|
line back in ip2.c OR all IRQs on all specified boards are
|
|
explicitly set to 0, then drop to poll only mode and override
|
|
PCI or EISA interrupts. This superceeds the old hack of
|
|
triggering if all interrupts were zero (like da default).
|
|
Still a hack but less prone to random acts of terrorism.
|
|
|
|
What we really should do, now that the IRQ default is set
|
|
to -1, is to use 0 as a hard coded, do not probe.
|
|
|
|
/\/\|=mhw=|\/\/
|
|
*/
|
|
poll_only |= irq[i];
|
|
}
|
|
poll_only = !poll_only;
|
|
|
|
/* Announce our presence */
|
|
printk(KERN_INFO "%s version %s\n", pcName, pcVersion);
|
|
|
|
ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
|
|
if (!ip2_tty_driver)
|
|
return -ENOMEM;
|
|
|
|
/* Initialise all the boards we can find (up to the maximum). */
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
switch (ip2config.addr[i]) {
|
|
case 0: /* skip this slot even if card is present */
|
|
break;
|
|
default: /* ISA */
|
|
/* ISA address must be specified */
|
|
if (ip2config.addr[i] < 0x100 ||
|
|
ip2config.addr[i] > 0x3f8) {
|
|
printk(KERN_ERR "IP2: Bad ISA board %d "
|
|
"address %x\n", i,
|
|
ip2config.addr[i]);
|
|
ip2config.addr[i] = 0;
|
|
break;
|
|
}
|
|
ip2config.type[i] = ISA;
|
|
|
|
/* Check for valid irq argument, set for polling if
|
|
* invalid */
|
|
if (ip2config.irq[i] &&
|
|
!is_valid_irq(ip2config.irq[i])) {
|
|
printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",
|
|
ip2config.irq[i]);
|
|
/* 0 is polling and is valid in that sense */
|
|
ip2config.irq[i] = 0;
|
|
}
|
|
break;
|
|
case PCI:
|
|
#ifdef CONFIG_PCI
|
|
{
|
|
u32 addr;
|
|
int status;
|
|
|
|
pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
|
|
PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev);
|
|
if (pdev == NULL) {
|
|
ip2config.addr[i] = 0;
|
|
printk(KERN_ERR "IP2: PCI board %d not "
|
|
"found\n", i);
|
|
break;
|
|
}
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
dev_err(&pdev->dev, "can't enable device\n");
|
|
break;
|
|
}
|
|
ip2config.type[i] = PCI;
|
|
ip2config.pci_dev[i] = pci_dev_get(pdev);
|
|
status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1,
|
|
&addr);
|
|
if (addr & 1)
|
|
ip2config.addr[i] = (USHORT)(addr & 0xfffe);
|
|
else
|
|
dev_err(&pdev->dev, "I/O address error\n");
|
|
|
|
ip2config.irq[i] = pdev->irq;
|
|
}
|
|
#else
|
|
printk(KERN_ERR "IP2: PCI card specified but PCI "
|
|
"support not enabled.\n");
|
|
printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI "
|
|
"defined!\n");
|
|
#endif /* CONFIG_PCI */
|
|
break;
|
|
case EISA:
|
|
ip2config.addr[i] = find_eisa_board(Eisa_slot + 1);
|
|
if (ip2config.addr[i] != 0) {
|
|
/* Eisa_irq set as side effect, boo */
|
|
ip2config.type[i] = EISA;
|
|
}
|
|
ip2config.irq[i] = Eisa_irq;
|
|
break;
|
|
} /* switch */
|
|
} /* for */
|
|
pci_dev_put(pdev);
|
|
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
if (ip2config.addr[i]) {
|
|
pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL);
|
|
if (pB) {
|
|
i2BoardPtrTable[i] = pB;
|
|
iiSetAddress(pB, ip2config.addr[i],
|
|
ii2DelayTimer);
|
|
iiReset(pB);
|
|
} else
|
|
printk(KERN_ERR "IP2: board memory allocation "
|
|
"error\n");
|
|
}
|
|
}
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
pB = i2BoardPtrTable[i];
|
|
if (pB != NULL) {
|
|
iiResetDelay(pB);
|
|
break;
|
|
}
|
|
}
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
/* We don't want to request the firmware unless we have at
|
|
least one board */
|
|
if (i2BoardPtrTable[i] != NULL) {
|
|
if (!fw)
|
|
fw = ip2_request_firmware();
|
|
if (!fw)
|
|
break;
|
|
ip2_init_board(i, fw);
|
|
}
|
|
}
|
|
if (fw)
|
|
release_firmware(fw);
|
|
|
|
ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0);
|
|
|
|
ip2_tty_driver->owner = THIS_MODULE;
|
|
ip2_tty_driver->name = "ttyF";
|
|
ip2_tty_driver->driver_name = pcDriver_name;
|
|
ip2_tty_driver->major = IP2_TTY_MAJOR;
|
|
ip2_tty_driver->minor_start = 0;
|
|
ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
ip2_tty_driver->init_termios = tty_std_termios;
|
|
ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
|
|
ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW |
|
|
TTY_DRIVER_DYNAMIC_DEV;
|
|
tty_set_operations(ip2_tty_driver, &ip2_ops);
|
|
|
|
ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0);
|
|
|
|
err = tty_register_driver(ip2_tty_driver);
|
|
if (err) {
|
|
printk(KERN_ERR "IP2: failed to register tty driver\n");
|
|
put_tty_driver(ip2_tty_driver);
|
|
return err; /* leaking resources */
|
|
}
|
|
|
|
err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl);
|
|
if (err) {
|
|
printk(KERN_ERR "IP2: failed to register IPL device (%d)\n",
|
|
err);
|
|
} else {
|
|
/* create the sysfs class */
|
|
ip2_class = class_create(THIS_MODULE, "ip2");
|
|
if (IS_ERR(ip2_class)) {
|
|
err = PTR_ERR(ip2_class);
|
|
goto out_chrdev;
|
|
}
|
|
}
|
|
/* Register the read_procmem thing */
|
|
if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) {
|
|
printk(KERN_ERR "IP2: failed to register read_procmem\n");
|
|
return -EIO; /* leaking resources */
|
|
}
|
|
|
|
ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0);
|
|
/* Register the interrupt handler or poll handler, depending upon the
|
|
* specified interrupt.
|
|
*/
|
|
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
if (ip2config.addr[i] == 0)
|
|
continue;
|
|
|
|
pB = i2BoardPtrTable[i];
|
|
if (pB != NULL) {
|
|
device_create(ip2_class, NULL,
|
|
MKDEV(IP2_IPL_MAJOR, 4 * i),
|
|
NULL, "ipl%d", i);
|
|
device_create(ip2_class, NULL,
|
|
MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
|
|
NULL, "stat%d", i);
|
|
|
|
for (box = 0; box < ABS_MAX_BOXES; box++)
|
|
for (j = 0; j < ABS_BIGGEST_BOX; j++)
|
|
if (pB->i2eChannelMap[box] & (1 << j))
|
|
tty_register_device(
|
|
ip2_tty_driver,
|
|
j + ABS_BIGGEST_BOX *
|
|
(box+i*ABS_MAX_BOXES),
|
|
NULL);
|
|
}
|
|
|
|
if (poll_only) {
|
|
/* Poll only forces driver to only use polling and
|
|
to ignore the probed PCI or EISA interrupts. */
|
|
ip2config.irq[i] = CIR_POLL;
|
|
}
|
|
if (ip2config.irq[i] == CIR_POLL) {
|
|
retry:
|
|
if (!timer_pending(&PollTimer)) {
|
|
mod_timer(&PollTimer, POLL_TIMEOUT);
|
|
printk(KERN_INFO "IP2: polling\n");
|
|
}
|
|
} else {
|
|
if (have_requested_irq(ip2config.irq[i]))
|
|
continue;
|
|
rc = request_irq(ip2config.irq[i], ip2_interrupt,
|
|
IP2_SA_FLAGS |
|
|
(ip2config.type[i] == PCI ? IRQF_SHARED : 0),
|
|
pcName, i2BoardPtrTable[i]);
|
|
if (rc) {
|
|
printk(KERN_ERR "IP2: request_irq failed: "
|
|
"error %d\n", rc);
|
|
ip2config.irq[i] = CIR_POLL;
|
|
printk(KERN_INFO "IP2: Polling %ld/sec.\n",
|
|
(POLL_TIMEOUT - jiffies));
|
|
goto retry;
|
|
}
|
|
mark_requested_irq(ip2config.irq[i]);
|
|
/* Initialise the interrupt handler bottom half
|
|
* (aka slih). */
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
|
|
if (i2BoardPtrTable[i]) {
|
|
/* set and enable board interrupt */
|
|
set_irq(i, ip2config.irq[i]);
|
|
}
|
|
}
|
|
|
|
ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0);
|
|
|
|
return 0;
|
|
|
|
out_chrdev:
|
|
unregister_chrdev(IP2_IPL_MAJOR, "ip2");
|
|
/* unregister and put tty here */
|
|
return err;
|
|
}
|
|
module_init(ip2_loadmain);
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_init_board() */
|
|
/* Parameters: Index of board in configuration structure */
|
|
/* Returns: Success (0) */
|
|
/* */
|
|
/* Description: */
|
|
/* This function initializes the specified board. The loadware is copied to */
|
|
/* the board, the channel structures are initialized, and the board details */
|
|
/* are reported on the console. */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_init_board(int boardnum, const struct firmware *fw)
|
|
{
|
|
int i;
|
|
int nports = 0, nboxes = 0;
|
|
i2ChanStrPtr pCh;
|
|
i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
|
|
|
|
if ( !iiInitialize ( pB ) ) {
|
|
printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n",
|
|
pB->i2eBase, pB->i2eError );
|
|
goto err_initialize;
|
|
}
|
|
printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1,
|
|
ip2config.addr[boardnum], ip2config.irq[boardnum] );
|
|
|
|
if (!request_region( ip2config.addr[boardnum], 8, pcName )) {
|
|
printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]);
|
|
goto err_initialize;
|
|
}
|
|
|
|
if ( iiDownloadAll ( pB, (loadHdrStrPtr)fw->data, 1, fw->size )
|
|
!= II_DOWN_GOOD ) {
|
|
printk ( KERN_ERR "IP2: failed to download loadware\n" );
|
|
goto err_release_region;
|
|
} else {
|
|
printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n",
|
|
pB->i2ePom.e.porVersion,
|
|
pB->i2ePom.e.porRevision,
|
|
pB->i2ePom.e.porSubRev, pB->i2eLVersion,
|
|
pB->i2eLRevision, pB->i2eLSub );
|
|
}
|
|
|
|
switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) {
|
|
|
|
default:
|
|
printk( KERN_ERR "IP2: Unknown board type, ID = %x\n",
|
|
pB->i2ePom.e.porID );
|
|
nports = 0;
|
|
goto err_release_region;
|
|
break;
|
|
|
|
case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */
|
|
printk ( KERN_INFO "IP2: ISA-4\n" );
|
|
nports = 4;
|
|
break;
|
|
|
|
case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */
|
|
printk ( KERN_INFO "IP2: ISA-8 std\n" );
|
|
nports = 8;
|
|
break;
|
|
|
|
case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */
|
|
printk ( KERN_INFO "IP2: ISA-8 RJ11\n" );
|
|
nports = 8;
|
|
break;
|
|
|
|
case POR_ID_FIIEX: /* IntelliPort IIEX */
|
|
{
|
|
int portnum = IP2_PORTS_PER_BOARD * boardnum;
|
|
int box;
|
|
|
|
for( box = 0; box < ABS_MAX_BOXES; ++box ) {
|
|
if ( pB->i2eChannelMap[box] != 0 ) {
|
|
++nboxes;
|
|
}
|
|
for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
|
|
if ( pB->i2eChannelMap[box] & 1<< i ) {
|
|
++nports;
|
|
}
|
|
}
|
|
}
|
|
DevTableMem[boardnum] = pCh =
|
|
kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL );
|
|
if ( !pCh ) {
|
|
printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
|
|
goto err_release_region;
|
|
}
|
|
if ( !i2InitChannels( pB, nports, pCh ) ) {
|
|
printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
|
|
kfree ( pCh );
|
|
goto err_release_region;
|
|
}
|
|
pB->i2eChannelPtr = &DevTable[portnum];
|
|
pB->i2eChannelCnt = ABS_MOST_PORTS;
|
|
|
|
for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) {
|
|
for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
|
|
if ( pB->i2eChannelMap[box] & (1 << i) ) {
|
|
DevTable[portnum + i] = pCh;
|
|
pCh->port_index = portnum + i;
|
|
pCh++;
|
|
}
|
|
}
|
|
}
|
|
printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n",
|
|
nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 );
|
|
}
|
|
goto ex_exit;
|
|
}
|
|
DevTableMem[boardnum] = pCh =
|
|
kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL );
|
|
if ( !pCh ) {
|
|
printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
|
|
goto err_release_region;
|
|
}
|
|
pB->i2eChannelPtr = pCh;
|
|
pB->i2eChannelCnt = nports;
|
|
if ( !i2InitChannels( pB, nports, pCh ) ) {
|
|
printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
|
|
kfree ( pCh );
|
|
goto err_release_region;
|
|
}
|
|
pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum];
|
|
|
|
for( i = 0; i < pB->i2eChannelCnt; ++i ) {
|
|
DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh;
|
|
pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i;
|
|
pCh++;
|
|
}
|
|
ex_exit:
|
|
INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh);
|
|
return;
|
|
|
|
err_release_region:
|
|
release_region(ip2config.addr[boardnum], 8);
|
|
err_initialize:
|
|
kfree ( pB );
|
|
i2BoardPtrTable[boardnum] = NULL;
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: find_eisa_board ( int start_slot ) */
|
|
/* Parameters: First slot to check */
|
|
/* Returns: Address of EISA IntelliPort II controller */
|
|
/* */
|
|
/* Description: */
|
|
/* This function searches for an EISA IntelliPort controller, starting */
|
|
/* from the specified slot number. If the motherboard is not identified as an */
|
|
/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */
|
|
/* it returns the base address of the controller. */
|
|
/******************************************************************************/
|
|
static unsigned short
|
|
find_eisa_board( int start_slot )
|
|
{
|
|
int i, j;
|
|
unsigned int idm = 0;
|
|
unsigned int idp = 0;
|
|
unsigned int base = 0;
|
|
unsigned int value;
|
|
int setup_address;
|
|
int setup_irq;
|
|
int ismine = 0;
|
|
|
|
/*
|
|
* First a check for an EISA motherboard, which we do by comparing the
|
|
* EISA ID registers for the system board and the first couple of slots.
|
|
* No slot ID should match the system board ID, but on an ISA or PCI
|
|
* machine the odds are that an empty bus will return similar values for
|
|
* each slot.
|
|
*/
|
|
i = 0x0c80;
|
|
value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3);
|
|
for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) {
|
|
j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3);
|
|
if ( value == j )
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* OK, so we are inclined to believe that this is an EISA machine. Find
|
|
* an IntelliPort controller.
|
|
*/
|
|
for( i = start_slot; i < 16; i++ ) {
|
|
base = i << 12;
|
|
idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff);
|
|
idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff);
|
|
ismine = 0;
|
|
if ( idm == 0x0e8e ) {
|
|
if ( idp == 0x0281 || idp == 0x0218 ) {
|
|
ismine = 1;
|
|
} else if ( idp == 0x0282 || idp == 0x0283 ) {
|
|
ismine = 3; /* Can do edge-trigger */
|
|
}
|
|
if ( ismine ) {
|
|
Eisa_slot = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if ( !ismine )
|
|
return 0;
|
|
|
|
/* It's some sort of EISA card, but at what address is it configured? */
|
|
|
|
setup_address = base + 0xc88;
|
|
value = inb(base + 0xc86);
|
|
setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0;
|
|
|
|
if ( (ismine & 2) && !(value & 0x10) ) {
|
|
ismine = 1; /* Could be edging, but not */
|
|
}
|
|
|
|
if ( Eisa_irq == 0 ) {
|
|
Eisa_irq = setup_irq;
|
|
} else if ( Eisa_irq != setup_irq ) {
|
|
printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" );
|
|
}
|
|
|
|
#ifdef IP2DEBUG_INIT
|
|
printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x",
|
|
base >> 12, idm, idp, setup_address);
|
|
if ( Eisa_irq ) {
|
|
printk(KERN_DEBUG ", Interrupt %d %s\n",
|
|
setup_irq, (ismine & 2) ? "(edge)" : "(level)");
|
|
} else {
|
|
printk(KERN_DEBUG ", (polled)\n");
|
|
}
|
|
#endif
|
|
return setup_address;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: set_irq() */
|
|
/* Parameters: index to board in board table */
|
|
/* IRQ to use */
|
|
/* Returns: Success (0) */
|
|
/* */
|
|
/* Description: */
|
|
/******************************************************************************/
|
|
static void
|
|
set_irq( int boardnum, int boardIrq )
|
|
{
|
|
unsigned char tempCommand[16];
|
|
i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Notify the boards they may generate interrupts. This is done by
|
|
* sending an in-line command to channel 0 on each board. This is why
|
|
* the channels have to be defined already. For each board, if the
|
|
* interrupt has never been defined, we must do so NOW, directly, since
|
|
* board will not send flow control or even give an interrupt until this
|
|
* is done. If polling we must send 0 as the interrupt parameter.
|
|
*/
|
|
|
|
// We will get an interrupt here at the end of this function
|
|
|
|
iiDisableMailIrq(pB);
|
|
|
|
/* We build up the entire packet header. */
|
|
CHANNEL_OF(tempCommand) = 0;
|
|
PTYPE_OF(tempCommand) = PTYPE_INLINE;
|
|
CMD_COUNT_OF(tempCommand) = 2;
|
|
(CMD_OF(tempCommand))[0] = CMDVALUE_IRQ;
|
|
(CMD_OF(tempCommand))[1] = boardIrq;
|
|
/*
|
|
* Write to FIFO; don't bother to adjust fifo capacity for this, since
|
|
* board will respond almost immediately after SendMail hit.
|
|
*/
|
|
write_lock_irqsave(&pB->write_fifo_spinlock, flags);
|
|
iiWriteBuf(pB, tempCommand, 4);
|
|
write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
|
|
pB->i2eUsingIrq = boardIrq;
|
|
pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
|
|
|
|
/* Need to update number of boards before you enable mailbox int */
|
|
++i2nBoards;
|
|
|
|
CHANNEL_OF(tempCommand) = 0;
|
|
PTYPE_OF(tempCommand) = PTYPE_BYPASS;
|
|
CMD_COUNT_OF(tempCommand) = 6;
|
|
(CMD_OF(tempCommand))[0] = 88; // SILO
|
|
(CMD_OF(tempCommand))[1] = 64; // chars
|
|
(CMD_OF(tempCommand))[2] = 32; // ms
|
|
|
|
(CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK
|
|
(CMD_OF(tempCommand))[4] = 64; // chars
|
|
|
|
(CMD_OF(tempCommand))[5] = 87; // HW_TEST
|
|
write_lock_irqsave(&pB->write_fifo_spinlock, flags);
|
|
iiWriteBuf(pB, tempCommand, 8);
|
|
write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
|
|
|
|
CHANNEL_OF(tempCommand) = 0;
|
|
PTYPE_OF(tempCommand) = PTYPE_BYPASS;
|
|
CMD_COUNT_OF(tempCommand) = 1;
|
|
(CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */
|
|
iiWriteBuf(pB, tempCommand, 3);
|
|
|
|
#ifdef XXX
|
|
// enable heartbeat for test porpoises
|
|
CHANNEL_OF(tempCommand) = 0;
|
|
PTYPE_OF(tempCommand) = PTYPE_BYPASS;
|
|
CMD_COUNT_OF(tempCommand) = 2;
|
|
(CMD_OF(tempCommand))[0] = 44; /* get ping */
|
|
(CMD_OF(tempCommand))[1] = 200; /* 200 ms */
|
|
write_lock_irqsave(&pB->write_fifo_spinlock, flags);
|
|
iiWriteBuf(pB, tempCommand, 4);
|
|
write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
|
|
#endif
|
|
|
|
iiEnableMailIrq(pB);
|
|
iiSendPendingMail(pB);
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Interrupt Handler Section */
|
|
/******************************************************************************/
|
|
|
|
static inline void
|
|
service_all_boards(void)
|
|
{
|
|
int i;
|
|
i2eBordStrPtr pB;
|
|
|
|
/* Service every board on the list */
|
|
for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
|
|
pB = i2BoardPtrTable[i];
|
|
if ( pB ) {
|
|
i2ServiceBoard( pB );
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_interrupt_bh(work) */
|
|
/* Parameters: work - pointer to the board structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* Service the board in a bottom half interrupt handler and then */
|
|
/* reenable the board's interrupts if it has an IRQ number */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_interrupt_bh(struct work_struct *work)
|
|
{
|
|
i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt);
|
|
// pB better well be set or we have a problem! We can only get
|
|
// here from the IMMEDIATE queue. Here, we process the boards.
|
|
// Checking pB doesn't cost much and it saves us from the sanity checkers.
|
|
|
|
bh_counter++;
|
|
|
|
if ( pB ) {
|
|
i2ServiceBoard( pB );
|
|
if( pB->i2eUsingIrq ) {
|
|
// Re-enable his interrupts
|
|
iiEnableMailIrq(pB);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_interrupt(int irq, void *dev_id) */
|
|
/* Parameters: irq - interrupt number */
|
|
/* pointer to optional device ID structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* Our task here is simply to identify each board which needs servicing. */
|
|
/* If we are queuing then, queue it to be serviced, and disable its irq */
|
|
/* mask otherwise process the board directly. */
|
|
/* */
|
|
/* We could queue by IRQ but that just complicates things on both ends */
|
|
/* with very little gain in performance (how many instructions does */
|
|
/* it take to iterate on the immediate queue). */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_irq_work(i2eBordStrPtr pB)
|
|
{
|
|
#ifdef USE_IQI
|
|
if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) {
|
|
// Disable his interrupt (will be enabled when serviced)
|
|
// This is mostly to protect from reentrancy.
|
|
iiDisableMailIrq(pB);
|
|
|
|
// Park the board on the immediate queue for processing.
|
|
schedule_work(&pB->tqueue_interrupt);
|
|
|
|
// Make sure the immediate queue is flagged to fire.
|
|
}
|
|
#else
|
|
|
|
// We are using immediate servicing here. This sucks and can
|
|
// cause all sorts of havoc with ppp and others. The failsafe
|
|
// check on iiSendPendingMail could also throw a hairball.
|
|
|
|
i2ServiceBoard( pB );
|
|
|
|
#endif /* USE_IQI */
|
|
}
|
|
|
|
static void
|
|
ip2_polled_interrupt(void)
|
|
{
|
|
int i;
|
|
i2eBordStrPtr pB;
|
|
|
|
ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0);
|
|
|
|
/* Service just the boards on the list using this irq */
|
|
for( i = 0; i < i2nBoards; ++i ) {
|
|
pB = i2BoardPtrTable[i];
|
|
|
|
// Only process those boards which match our IRQ.
|
|
// IRQ = 0 for polled boards, we won't poll "IRQ" boards
|
|
|
|
if (pB && pB->i2eUsingIrq == 0)
|
|
ip2_irq_work(pB);
|
|
}
|
|
|
|
++irq_counter;
|
|
|
|
ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
|
|
}
|
|
|
|
static irqreturn_t
|
|
ip2_interrupt(int irq, void *dev_id)
|
|
{
|
|
i2eBordStrPtr pB = dev_id;
|
|
|
|
ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, pB->i2eUsingIrq );
|
|
|
|
ip2_irq_work(pB);
|
|
|
|
++irq_counter;
|
|
|
|
ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_poll(unsigned long arg) */
|
|
/* Parameters: ? */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* This function calls the library routine i2ServiceBoard for each board in */
|
|
/* the board table. This is used instead of the interrupt routine when polled */
|
|
/* mode is specified. */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_poll(unsigned long arg)
|
|
{
|
|
ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
|
|
|
|
// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
|
|
// It will NOT poll boards handled by hard interrupts.
|
|
// The issue of queued BH interrupts is handled in ip2_interrupt().
|
|
ip2_polled_interrupt();
|
|
|
|
mod_timer(&PollTimer, POLL_TIMEOUT);
|
|
|
|
ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
|
|
}
|
|
|
|
static void do_input(struct work_struct *work)
|
|
{
|
|
i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input);
|
|
unsigned long flags;
|
|
|
|
ip2trace(CHANN, ITRC_INPUT, 21, 0 );
|
|
|
|
// Data input
|
|
if ( pCh->pTTY != NULL ) {
|
|
read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
|
|
if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
|
|
read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
|
|
i2Input( pCh );
|
|
} else
|
|
read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
|
|
} else {
|
|
ip2trace(CHANN, ITRC_INPUT, 22, 0 );
|
|
|
|
i2InputFlush( pCh );
|
|
}
|
|
}
|
|
|
|
// code duplicated from n_tty (ldisc)
|
|
static inline void isig(int sig, struct tty_struct *tty, int flush)
|
|
{
|
|
/* FIXME: This is completely bogus */
|
|
if (tty->pgrp)
|
|
kill_pgrp(tty->pgrp, sig, 1);
|
|
if (flush || !L_NOFLSH(tty)) {
|
|
if ( tty->ldisc->ops->flush_buffer )
|
|
tty->ldisc->ops->flush_buffer(tty);
|
|
i2InputFlush( tty->driver_data );
|
|
}
|
|
}
|
|
|
|
static void do_status(struct work_struct *work)
|
|
{
|
|
i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status);
|
|
int status;
|
|
|
|
status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) );
|
|
|
|
ip2trace (CHANN, ITRC_STATUS, 21, 1, status );
|
|
|
|
if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) {
|
|
if ( (status & I2_BRK) ) {
|
|
// code duplicated from n_tty (ldisc)
|
|
if (I_IGNBRK(pCh->pTTY))
|
|
goto skip_this;
|
|
if (I_BRKINT(pCh->pTTY)) {
|
|
isig(SIGINT, pCh->pTTY, 1);
|
|
goto skip_this;
|
|
}
|
|
wake_up_interruptible(&pCh->pTTY->read_wait);
|
|
}
|
|
#ifdef NEVER_HAPPENS_AS_SETUP_XXX
|
|
// and can't work because we don't know the_char
|
|
// as the_char is reported on a separate path
|
|
// The intelligent board does this stuff as setup
|
|
{
|
|
char brkf = TTY_NORMAL;
|
|
unsigned char brkc = '\0';
|
|
unsigned char tmp;
|
|
if ( (status & I2_BRK) ) {
|
|
brkf = TTY_BREAK;
|
|
brkc = '\0';
|
|
}
|
|
else if (status & I2_PAR) {
|
|
brkf = TTY_PARITY;
|
|
brkc = the_char;
|
|
} else if (status & I2_FRA) {
|
|
brkf = TTY_FRAME;
|
|
brkc = the_char;
|
|
} else if (status & I2_OVR) {
|
|
brkf = TTY_OVERRUN;
|
|
brkc = the_char;
|
|
}
|
|
tmp = pCh->pTTY->real_raw;
|
|
pCh->pTTY->real_raw = 0;
|
|
pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
|
|
pCh->pTTY->real_raw = tmp;
|
|
}
|
|
#endif /* NEVER_HAPPENS_AS_SETUP_XXX */
|
|
}
|
|
skip_this:
|
|
|
|
if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) {
|
|
wake_up_interruptible(&pCh->delta_msr_wait);
|
|
|
|
if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) {
|
|
if ( status & I2_DCD ) {
|
|
if ( pCh->wopen ) {
|
|
wake_up_interruptible ( &pCh->open_wait );
|
|
}
|
|
} else {
|
|
if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) {
|
|
tty_hangup( pCh->pTTY );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
ip2trace (CHANN, ITRC_STATUS, 26, 0 );
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Device Open/Close/Ioctl Entry Point Section */
|
|
/******************************************************************************/
|
|
|
|
/******************************************************************************/
|
|
/* Function: open_sanity_check() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Pointer to file structure */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: */
|
|
/* Verifies the structure magic numbers and cross links. */
|
|
/******************************************************************************/
|
|
#ifdef IP2DEBUG_OPEN
|
|
static void
|
|
open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd )
|
|
{
|
|
if ( pBrd->i2eValid != I2E_MAGIC ) {
|
|
printk(KERN_ERR "IP2: invalid board structure\n" );
|
|
} else if ( pBrd != pCh->pMyBord ) {
|
|
printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n",
|
|
pCh->pMyBord );
|
|
} else if ( pBrd->i2eChannelCnt < pCh->port_index ) {
|
|
printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index );
|
|
} else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) {
|
|
} else {
|
|
printk(KERN_INFO "IP2: all pointers check out!\n" );
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_open() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Pointer to file structure */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: (MANDATORY) */
|
|
/* A successful device open has to run a gauntlet of checks before it */
|
|
/* completes. After some sanity checking and pointer setup, the function */
|
|
/* blocks until all conditions are satisfied. It then initialises the port to */
|
|
/* the default characteristics and returns. */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_open( PTTY tty, struct file *pFile )
|
|
{
|
|
wait_queue_t wait;
|
|
int rc = 0;
|
|
int do_clocal = 0;
|
|
i2ChanStrPtr pCh = DevTable[tty->index];
|
|
|
|
ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 );
|
|
|
|
if ( pCh == NULL ) {
|
|
return -ENODEV;
|
|
}
|
|
/* Setup pointer links in device and tty structures */
|
|
pCh->pTTY = tty;
|
|
tty->driver_data = pCh;
|
|
|
|
#ifdef IP2DEBUG_OPEN
|
|
printk(KERN_DEBUG \
|
|
"IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n",
|
|
tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index);
|
|
open_sanity_check ( pCh, pCh->pMyBord );
|
|
#endif
|
|
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP);
|
|
pCh->dataSetOut |= (I2_DTR | I2_RTS);
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
|
|
/* Block here until the port is ready (per serial and istallion) */
|
|
/*
|
|
* 1. If the port is in the middle of closing wait for the completion
|
|
* and then return the appropriate error.
|
|
*/
|
|
init_waitqueue_entry(&wait, current);
|
|
add_wait_queue(&pCh->close_wait, &wait);
|
|
set_current_state( TASK_INTERRUPTIBLE );
|
|
|
|
if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
|
|
if ( pCh->flags & ASYNC_CLOSING ) {
|
|
schedule();
|
|
}
|
|
if ( tty_hung_up_p(pFile) ) {
|
|
set_current_state( TASK_RUNNING );
|
|
remove_wait_queue(&pCh->close_wait, &wait);
|
|
return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS;
|
|
}
|
|
}
|
|
set_current_state( TASK_RUNNING );
|
|
remove_wait_queue(&pCh->close_wait, &wait);
|
|
|
|
/*
|
|
* 3. Handle a non-blocking open of a normal port.
|
|
*/
|
|
if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) {
|
|
pCh->flags |= ASYNC_NORMAL_ACTIVE;
|
|
goto noblock;
|
|
}
|
|
/*
|
|
* 4. Now loop waiting for the port to be free and carrier present
|
|
* (if required).
|
|
*/
|
|
if ( tty->termios->c_cflag & CLOCAL )
|
|
do_clocal = 1;
|
|
|
|
#ifdef IP2DEBUG_OPEN
|
|
printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal);
|
|
#endif
|
|
|
|
++pCh->wopen;
|
|
|
|
init_waitqueue_entry(&wait, current);
|
|
add_wait_queue(&pCh->open_wait, &wait);
|
|
|
|
for(;;) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
|
|
pCh->dataSetOut |= (I2_DTR | I2_RTS);
|
|
set_current_state( TASK_INTERRUPTIBLE );
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
if ( tty_hung_up_p(pFile) ) {
|
|
set_current_state( TASK_RUNNING );
|
|
remove_wait_queue(&pCh->open_wait, &wait);
|
|
return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS;
|
|
}
|
|
if (!(pCh->flags & ASYNC_CLOSING) &&
|
|
(do_clocal || (pCh->dataSetIn & I2_DCD) )) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
|
|
#ifdef IP2DEBUG_OPEN
|
|
printk(KERN_DEBUG "ASYNC_CLOSING = %s\n",
|
|
(pCh->flags & ASYNC_CLOSING)?"True":"False");
|
|
printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n");
|
|
#endif
|
|
ip2trace (CHANN, ITRC_OPEN, 3, 2, 0,
|
|
(pCh->flags & ASYNC_CLOSING) );
|
|
/* check for signal */
|
|
if (signal_pending(current)) {
|
|
rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
|
|
break;
|
|
}
|
|
schedule();
|
|
}
|
|
set_current_state( TASK_RUNNING );
|
|
remove_wait_queue(&pCh->open_wait, &wait);
|
|
|
|
--pCh->wopen; //why count?
|
|
|
|
ip2trace (CHANN, ITRC_OPEN, 4, 0 );
|
|
|
|
if (rc != 0 ) {
|
|
return rc;
|
|
}
|
|
pCh->flags |= ASYNC_NORMAL_ACTIVE;
|
|
|
|
noblock:
|
|
|
|
/* first open - Assign termios structure to port */
|
|
if ( tty->count == 1 ) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
|
|
/* Now we must send the termios settings to the loadware */
|
|
set_params( pCh, NULL );
|
|
}
|
|
|
|
/*
|
|
* Now set any i2lib options. These may go away if the i2lib code ends
|
|
* up rolled into the mainline.
|
|
*/
|
|
pCh->channelOptions |= CO_NBLOCK_WRITE;
|
|
|
|
#ifdef IP2DEBUG_OPEN
|
|
printk (KERN_DEBUG "IP2: open completed\n" );
|
|
#endif
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
|
|
ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 );
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_close() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Pointer to file structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_close( PTTY tty, struct file *pFile )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
|
|
if ( !pCh ) {
|
|
return;
|
|
}
|
|
|
|
ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 );
|
|
|
|
#ifdef IP2DEBUG_OPEN
|
|
printk(KERN_DEBUG "IP2:close %s:\n",tty->name);
|
|
#endif
|
|
|
|
if ( tty_hung_up_p ( pFile ) ) {
|
|
|
|
ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 );
|
|
|
|
return;
|
|
}
|
|
if ( tty->count > 1 ) { /* not the last close */
|
|
|
|
ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 );
|
|
|
|
return;
|
|
}
|
|
pCh->flags |= ASYNC_CLOSING; // last close actually
|
|
|
|
tty->closing = 1;
|
|
|
|
if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) {
|
|
/*
|
|
* Before we drop DTR, make sure the transmitter has completely drained.
|
|
* This uses an timeout, after which the close
|
|
* completes.
|
|
*/
|
|
ip2_wait_until_sent(tty, pCh->ClosingWaitTime );
|
|
}
|
|
/*
|
|
* At this point we stop accepting input. Here we flush the channel
|
|
* input buffer which will allow the board to send up more data. Any
|
|
* additional input is tossed at interrupt/poll time.
|
|
*/
|
|
i2InputFlush( pCh );
|
|
|
|
/* disable DSS reporting */
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 4,
|
|
CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
|
|
if ( !tty || (tty->termios->c_cflag & HUPCL) ) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
|
|
pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
|
|
i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
|
|
}
|
|
|
|
serviceOutgoingFifo ( pCh->pMyBord );
|
|
|
|
tty_ldisc_flush(tty);
|
|
tty_driver_flush_buffer(tty);
|
|
tty->closing = 0;
|
|
|
|
pCh->pTTY = NULL;
|
|
|
|
if (pCh->wopen) {
|
|
if (pCh->ClosingDelay) {
|
|
msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay));
|
|
}
|
|
wake_up_interruptible(&pCh->open_wait);
|
|
}
|
|
|
|
pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
|
|
wake_up_interruptible(&pCh->close_wait);
|
|
|
|
#ifdef IP2DEBUG_OPEN
|
|
DBG_CNT("ip2_close: after wakeups--");
|
|
#endif
|
|
|
|
|
|
ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 );
|
|
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_hangup() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_hangup ( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
|
|
if( !pCh ) {
|
|
return;
|
|
}
|
|
|
|
ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 );
|
|
|
|
ip2_flush_buffer(tty);
|
|
|
|
/* disable DSS reporting */
|
|
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP);
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
|
|
if ( (tty->termios->c_cflag & HUPCL) ) {
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN);
|
|
pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
|
|
i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
|
|
}
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 1, 3,
|
|
CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
|
|
serviceOutgoingFifo ( pCh->pMyBord );
|
|
|
|
wake_up_interruptible ( &pCh->delta_msr_wait );
|
|
|
|
pCh->flags &= ~ASYNC_NORMAL_ACTIVE;
|
|
pCh->pTTY = NULL;
|
|
wake_up_interruptible ( &pCh->open_wait );
|
|
|
|
ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 );
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/******************************************************************************/
|
|
/* Device Output Section */
|
|
/******************************************************************************/
|
|
/******************************************************************************/
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_write() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Flag denoting data is in user (1) or kernel (0) space */
|
|
/* Pointer to data */
|
|
/* Number of bytes to write */
|
|
/* Returns: Number of bytes actually written */
|
|
/* */
|
|
/* Description: (MANDATORY) */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_write( PTTY tty, const unsigned char *pData, int count)
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
int bytesSent = 0;
|
|
unsigned long flags;
|
|
|
|
ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 );
|
|
|
|
/* Flush out any buffered data left over from ip2_putchar() calls. */
|
|
ip2_flush_chars( tty );
|
|
|
|
/* This is the actual move bit. Make sure it does what we need!!!!! */
|
|
write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
|
|
bytesSent = i2Output( pCh, pData, count);
|
|
write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
|
|
ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
|
|
|
|
return bytesSent > 0 ? bytesSent : 0;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_putchar() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Character to write */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_putchar( PTTY tty, unsigned char ch )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
|
|
|
|
write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
|
|
pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
|
|
if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
|
|
write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
ip2_flush_chars( tty );
|
|
} else
|
|
write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
return 1;
|
|
|
|
// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_flush_chars() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_flush_chars( PTTY tty )
|
|
{
|
|
int strip;
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
|
|
if ( pCh->Pbuf_stuff ) {
|
|
|
|
// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
|
|
|
|
//
|
|
// We may need to restart i2Output if it does not fullfill this request
|
|
//
|
|
strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
|
|
if ( strip != pCh->Pbuf_stuff ) {
|
|
memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip );
|
|
}
|
|
pCh->Pbuf_stuff -= strip;
|
|
}
|
|
write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_write_room() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Number of bytes that the driver can accept */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_write_room ( PTTY tty )
|
|
{
|
|
int bytesFree;
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
|
|
bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
|
|
read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
|
|
ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
|
|
|
|
return ((bytesFree > 0) ? bytesFree : 0);
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_chars_in_buf() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Number of bytes queued for transmission */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_chars_in_buf ( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
int rc;
|
|
unsigned long flags;
|
|
|
|
ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff );
|
|
|
|
#ifdef IP2DEBUG_WRITE
|
|
printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n",
|
|
pCh->Obuf_char_count + pCh->Pbuf_stuff,
|
|
pCh->Obuf_char_count, pCh->Pbuf_stuff );
|
|
#endif
|
|
read_lock_irqsave(&pCh->Obuf_spinlock, flags);
|
|
rc = pCh->Obuf_char_count;
|
|
read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
|
|
read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
|
|
rc += pCh->Pbuf_stuff;
|
|
read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_flush_buffer() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_flush_buffer( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 );
|
|
|
|
#ifdef IP2DEBUG_WRITE
|
|
printk (KERN_DEBUG "IP2: flush buffer\n" );
|
|
#endif
|
|
write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
|
|
pCh->Pbuf_stuff = 0;
|
|
write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
|
|
i2FlushOutput( pCh );
|
|
ip2_owake(tty);
|
|
|
|
ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 );
|
|
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_wait_until_sent() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Timeout for wait. */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* This function is used in place of the normal tty_wait_until_sent, which */
|
|
/* only waits for the driver buffers to be empty (or rather, those buffers */
|
|
/* reported by chars_in_buffer) which doesn't work for IP2 due to the */
|
|
/* indeterminate number of bytes buffered on the board. */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_wait_until_sent ( PTTY tty, int timeout )
|
|
{
|
|
int i = jiffies;
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
|
|
tty_wait_until_sent(tty, timeout );
|
|
if ( (i = timeout - (jiffies -i)) > 0)
|
|
i2DrainOutput( pCh, i );
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/******************************************************************************/
|
|
/* Device Input Section */
|
|
/******************************************************************************/
|
|
/******************************************************************************/
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_throttle() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_throttle ( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
|
|
#ifdef IP2DEBUG_READ
|
|
printk (KERN_DEBUG "IP2: throttle\n" );
|
|
#endif
|
|
/*
|
|
* Signal the poll/interrupt handlers not to forward incoming data to
|
|
* the line discipline. This will cause the buffers to fill up in the
|
|
* library and thus cause the library routines to send the flow control
|
|
* stuff.
|
|
*/
|
|
pCh->throttled = 1;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_unthrottle() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_unthrottle ( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
#ifdef IP2DEBUG_READ
|
|
printk (KERN_DEBUG "IP2: unthrottle\n" );
|
|
#endif
|
|
|
|
/* Pass incoming data up to the line discipline again. */
|
|
pCh->throttled = 0;
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
|
|
if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
|
|
read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
|
|
#ifdef IP2DEBUG_READ
|
|
printk (KERN_DEBUG "i2Input called from unthrottle\n" );
|
|
#endif
|
|
i2Input( pCh );
|
|
} else
|
|
read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
|
|
}
|
|
|
|
static void
|
|
ip2_start ( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = DevTable[tty->index];
|
|
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND);
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME);
|
|
#ifdef IP2DEBUG_WRITE
|
|
printk (KERN_DEBUG "IP2: start tx\n" );
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
ip2_stop ( PTTY tty )
|
|
{
|
|
i2ChanStrPtr pCh = DevTable[tty->index];
|
|
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND);
|
|
#ifdef IP2DEBUG_WRITE
|
|
printk (KERN_DEBUG "IP2: stop tx\n" );
|
|
#endif
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Device Ioctl Section */
|
|
/******************************************************************************/
|
|
|
|
static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
i2ChanStrPtr pCh = DevTable[tty->index];
|
|
#ifdef ENABLE_DSSNOW
|
|
wait_queue_t wait;
|
|
#endif
|
|
|
|
if (pCh == NULL)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
FIXME - the following code is causing a NULL pointer dereference in
|
|
2.3.51 in an interrupt handler. It's suppose to prompt the board
|
|
to return the DSS signal status immediately. Why doesn't it do
|
|
the same thing in 2.2.14?
|
|
*/
|
|
|
|
/* This thing is still busted in the 1.2.12 driver on 2.4.x
|
|
and even hoses the serial console so the oops can be trapped.
|
|
/\/\|=mhw=|\/\/ */
|
|
|
|
#ifdef ENABLE_DSSNOW
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW);
|
|
|
|
init_waitqueue_entry(&wait, current);
|
|
add_wait_queue(&pCh->dss_now_wait, &wait);
|
|
set_current_state( TASK_INTERRUPTIBLE );
|
|
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
|
|
schedule();
|
|
|
|
set_current_state( TASK_RUNNING );
|
|
remove_wait_queue(&pCh->dss_now_wait, &wait);
|
|
|
|
if (signal_pending(current)) {
|
|
return -EINTR;
|
|
}
|
|
#endif
|
|
return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0)
|
|
| ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0)
|
|
| ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0)
|
|
| ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0)
|
|
| ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0)
|
|
| ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0);
|
|
}
|
|
|
|
static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
i2ChanStrPtr pCh = DevTable[tty->index];
|
|
|
|
if (pCh == NULL)
|
|
return -ENODEV;
|
|
|
|
if (set & TIOCM_RTS) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP);
|
|
pCh->dataSetOut |= I2_RTS;
|
|
}
|
|
if (set & TIOCM_DTR) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP);
|
|
pCh->dataSetOut |= I2_DTR;
|
|
}
|
|
|
|
if (clear & TIOCM_RTS) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN);
|
|
pCh->dataSetOut &= ~I2_RTS;
|
|
}
|
|
if (clear & TIOCM_DTR) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN);
|
|
pCh->dataSetOut &= ~I2_DTR;
|
|
}
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_ioctl() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Pointer to file structure */
|
|
/* Command */
|
|
/* Argument */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
|
|
{
|
|
wait_queue_t wait;
|
|
i2ChanStrPtr pCh = DevTable[tty->index];
|
|
i2eBordStrPtr pB;
|
|
struct async_icount cprev, cnow; /* kernel counter temps */
|
|
struct serial_icounter_struct __user *p_cuser;
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
if ( pCh == NULL )
|
|
return -ENODEV;
|
|
|
|
pB = pCh->pMyBord;
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg );
|
|
|
|
#ifdef IP2DEBUG_IOCTL
|
|
printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg );
|
|
#endif
|
|
|
|
switch(cmd) {
|
|
case TIOCGSERIAL:
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc );
|
|
|
|
rc = get_serial_info(pCh, argp);
|
|
if (rc)
|
|
return rc;
|
|
break;
|
|
|
|
case TIOCSSERIAL:
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc );
|
|
|
|
rc = set_serial_info(pCh, argp);
|
|
if (rc)
|
|
return rc;
|
|
break;
|
|
|
|
case TCXONC:
|
|
rc = tty_check_change(tty);
|
|
if (rc)
|
|
return rc;
|
|
switch (arg) {
|
|
case TCOOFF:
|
|
//return -ENOIOCTLCMD;
|
|
break;
|
|
case TCOON:
|
|
//return -ENOIOCTLCMD;
|
|
break;
|
|
case TCIOFF:
|
|
if (STOP_CHAR(tty) != __DISABLED_CHAR) {
|
|
i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
|
|
CMD_XMIT_NOW(STOP_CHAR(tty)));
|
|
}
|
|
break;
|
|
case TCION:
|
|
if (START_CHAR(tty) != __DISABLED_CHAR) {
|
|
i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
|
|
CMD_XMIT_NOW(START_CHAR(tty)));
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
case TCSBRK: /* SVID version: non-zero arg --> no break */
|
|
rc = tty_check_change(tty);
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc );
|
|
|
|
if (!rc) {
|
|
ip2_wait_until_sent(tty,0);
|
|
if (!arg) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250));
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
}
|
|
}
|
|
break;
|
|
|
|
case TCSBRKP: /* support for POSIX tcsendbreak() */
|
|
rc = tty_check_change(tty);
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc );
|
|
|
|
if (!rc) {
|
|
ip2_wait_until_sent(tty,0);
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
|
|
CMD_SEND_BRK(arg ? arg*100 : 250));
|
|
serviceOutgoingFifo ( pCh->pMyBord );
|
|
}
|
|
break;
|
|
|
|
case TIOCGSOFTCAR:
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc );
|
|
|
|
rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
|
|
if (rc)
|
|
return rc;
|
|
break;
|
|
|
|
case TIOCSSOFTCAR:
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc );
|
|
|
|
rc = get_user(arg,(unsigned long __user *) argp);
|
|
if (rc)
|
|
return rc;
|
|
tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL)
|
|
| (arg ? CLOCAL : 0));
|
|
|
|
break;
|
|
|
|
/*
|
|
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask
|
|
* passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS
|
|
* for masking). Caller should use TIOCGICOUNT to see which one it was
|
|
*/
|
|
case TIOCMIWAIT:
|
|
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
|
|
cprev = pCh->icount; /* note the counters on entry */
|
|
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
|
|
CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
|
|
init_waitqueue_entry(&wait, current);
|
|
add_wait_queue(&pCh->delta_msr_wait, &wait);
|
|
set_current_state( TASK_INTERRUPTIBLE );
|
|
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
for(;;) {
|
|
ip2trace (CHANN, ITRC_IOCTL, 10, 0 );
|
|
|
|
schedule();
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, 11, 0 );
|
|
|
|
/* see if a signal did it */
|
|
if (signal_pending(current)) {
|
|
rc = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
|
|
cnow = pCh->icount; /* atomic copy */
|
|
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
|
|
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
|
|
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
|
|
rc = -EIO; /* no change => rc */
|
|
break;
|
|
}
|
|
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
|
|
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
|
|
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
|
|
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
cprev = cnow;
|
|
}
|
|
set_current_state( TASK_RUNNING );
|
|
remove_wait_queue(&pCh->delta_msr_wait, &wait);
|
|
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3,
|
|
CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
|
|
if ( ! (pCh->flags & ASYNC_CHECK_CD)) {
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP);
|
|
}
|
|
serviceOutgoingFifo( pCh->pMyBord );
|
|
return rc;
|
|
break;
|
|
|
|
/*
|
|
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
|
|
* Return: write counters to the user passed counter struct
|
|
* NB: both 1->0 and 0->1 transitions are counted except for RI where
|
|
* only 0->1 is counted. The controller is quite capable of counting
|
|
* both, but this done to preserve compatibility with the standard
|
|
* serial driver.
|
|
*/
|
|
case TIOCGICOUNT:
|
|
ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
|
|
|
|
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
|
|
cnow = pCh->icount;
|
|
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
|
|
p_cuser = argp;
|
|
rc = put_user(cnow.cts, &p_cuser->cts);
|
|
rc = put_user(cnow.dsr, &p_cuser->dsr);
|
|
rc = put_user(cnow.rng, &p_cuser->rng);
|
|
rc = put_user(cnow.dcd, &p_cuser->dcd);
|
|
rc = put_user(cnow.rx, &p_cuser->rx);
|
|
rc = put_user(cnow.tx, &p_cuser->tx);
|
|
rc = put_user(cnow.frame, &p_cuser->frame);
|
|
rc = put_user(cnow.overrun, &p_cuser->overrun);
|
|
rc = put_user(cnow.parity, &p_cuser->parity);
|
|
rc = put_user(cnow.brk, &p_cuser->brk);
|
|
rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
|
|
break;
|
|
|
|
/*
|
|
* The rest are not supported by this driver. By returning -ENOIOCTLCMD they
|
|
* will be passed to the line discipline for it to handle.
|
|
*/
|
|
case TIOCSERCONFIG:
|
|
case TIOCSERGWILD:
|
|
case TIOCSERGETLSR:
|
|
case TIOCSERSWILD:
|
|
case TIOCSERGSTRUCT:
|
|
case TIOCSERGETMULTI:
|
|
case TIOCSERSETMULTI:
|
|
|
|
default:
|
|
ip2trace (CHANN, ITRC_IOCTL, 12, 0 );
|
|
|
|
rc = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 );
|
|
|
|
return rc;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: GetSerialInfo() */
|
|
/* Parameters: Pointer to channel structure */
|
|
/* Pointer to old termios structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* This is to support the setserial command, and requires processing of the */
|
|
/* standard Linux serial structure. */
|
|
/******************************************************************************/
|
|
static int
|
|
get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo )
|
|
{
|
|
struct serial_struct tmp;
|
|
|
|
memset ( &tmp, 0, sizeof(tmp) );
|
|
tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16];
|
|
if (BID_HAS_654(tmp.type)) {
|
|
tmp.type = PORT_16650;
|
|
} else {
|
|
tmp.type = PORT_CIRRUS;
|
|
}
|
|
tmp.line = pCh->port_index;
|
|
tmp.port = pCh->pMyBord->i2eBase;
|
|
tmp.irq = ip2config.irq[pCh->port_index/64];
|
|
tmp.flags = pCh->flags;
|
|
tmp.baud_base = pCh->BaudBase;
|
|
tmp.close_delay = pCh->ClosingDelay;
|
|
tmp.closing_wait = pCh->ClosingWaitTime;
|
|
tmp.custom_divisor = pCh->BaudDivisor;
|
|
return copy_to_user(retinfo,&tmp,sizeof(*retinfo));
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: SetSerialInfo() */
|
|
/* Parameters: Pointer to channel structure */
|
|
/* Pointer to old termios structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* This function provides support for setserial, which uses the TIOCSSERIAL */
|
|
/* ioctl. Not all setserial parameters are relevant. If the user attempts to */
|
|
/* change the IRQ, address or type of the port the ioctl fails. */
|
|
/******************************************************************************/
|
|
static int
|
|
set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info )
|
|
{
|
|
struct serial_struct ns;
|
|
int old_flags, old_baud_divisor;
|
|
|
|
if (copy_from_user(&ns, new_info, sizeof (ns)))
|
|
return -EFAULT;
|
|
|
|
/*
|
|
* We don't allow setserial to change IRQ, board address, type or baud
|
|
* base. Also line nunber as such is meaningless but we use it for our
|
|
* array index so it is fixed also.
|
|
*/
|
|
if ( (ns.irq != ip2config.irq[pCh->port_index])
|
|
|| ((int) ns.port != ((int) (pCh->pMyBord->i2eBase)))
|
|
|| (ns.baud_base != pCh->BaudBase)
|
|
|| (ns.line != pCh->port_index) ) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
old_flags = pCh->flags;
|
|
old_baud_divisor = pCh->BaudDivisor;
|
|
|
|
if ( !capable(CAP_SYS_ADMIN) ) {
|
|
if ( ( ns.close_delay != pCh->ClosingDelay ) ||
|
|
( (ns.flags & ~ASYNC_USR_MASK) !=
|
|
(pCh->flags & ~ASYNC_USR_MASK) ) ) {
|
|
return -EPERM;
|
|
}
|
|
|
|
pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) |
|
|
(ns.flags & ASYNC_USR_MASK);
|
|
pCh->BaudDivisor = ns.custom_divisor;
|
|
} else {
|
|
pCh->flags = (pCh->flags & ~ASYNC_FLAGS) |
|
|
(ns.flags & ASYNC_FLAGS);
|
|
pCh->BaudDivisor = ns.custom_divisor;
|
|
pCh->ClosingDelay = ns.close_delay * HZ/100;
|
|
pCh->ClosingWaitTime = ns.closing_wait * HZ/100;
|
|
}
|
|
|
|
if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) )
|
|
|| (old_baud_divisor != pCh->BaudDivisor) ) {
|
|
// Invalidate speed and reset parameters
|
|
set_params( pCh, NULL );
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_set_termios() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Pointer to old termios structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_set_termios( PTTY tty, struct ktermios *old_termios )
|
|
{
|
|
i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
|
|
|
|
#ifdef IP2DEBUG_IOCTL
|
|
printk (KERN_DEBUG "IP2: set termios %p\n", old_termios );
|
|
#endif
|
|
|
|
set_params( pCh, old_termios );
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_set_line_discipline() */
|
|
/* Parameters: Pointer to tty structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: Does nothing */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static void
|
|
ip2_set_line_discipline ( PTTY tty )
|
|
{
|
|
#ifdef IP2DEBUG_IOCTL
|
|
printk (KERN_DEBUG "IP2: set line discipline\n" );
|
|
#endif
|
|
|
|
ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 );
|
|
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: SetLine Characteristics() */
|
|
/* Parameters: Pointer to channel structure */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* This routine is called to update the channel structure with the new line */
|
|
/* characteristics, and send the appropriate commands to the board when they */
|
|
/* change. */
|
|
/******************************************************************************/
|
|
static void
|
|
set_params( i2ChanStrPtr pCh, struct ktermios *o_tios )
|
|
{
|
|
tcflag_t cflag, iflag, lflag;
|
|
char stop_char, start_char;
|
|
struct ktermios dummy;
|
|
|
|
lflag = pCh->pTTY->termios->c_lflag;
|
|
cflag = pCh->pTTY->termios->c_cflag;
|
|
iflag = pCh->pTTY->termios->c_iflag;
|
|
|
|
if (o_tios == NULL) {
|
|
dummy.c_lflag = ~lflag;
|
|
dummy.c_cflag = ~cflag;
|
|
dummy.c_iflag = ~iflag;
|
|
o_tios = &dummy;
|
|
}
|
|
|
|
{
|
|
switch ( cflag & CBAUD ) {
|
|
case B0:
|
|
i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
|
|
pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
|
|
i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
|
|
pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag);
|
|
goto service_it;
|
|
break;
|
|
case B38400:
|
|
/*
|
|
* This is the speed that is overloaded with all the other high
|
|
* speeds, depending upon the flag settings.
|
|
*/
|
|
if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) {
|
|
pCh->speed = CBR_57600;
|
|
} else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) {
|
|
pCh->speed = CBR_115200;
|
|
} else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) {
|
|
pCh->speed = CBR_C1;
|
|
} else {
|
|
pCh->speed = CBR_38400;
|
|
}
|
|
break;
|
|
case B50: pCh->speed = CBR_50; break;
|
|
case B75: pCh->speed = CBR_75; break;
|
|
case B110: pCh->speed = CBR_110; break;
|
|
case B134: pCh->speed = CBR_134; break;
|
|
case B150: pCh->speed = CBR_150; break;
|
|
case B200: pCh->speed = CBR_200; break;
|
|
case B300: pCh->speed = CBR_300; break;
|
|
case B600: pCh->speed = CBR_600; break;
|
|
case B1200: pCh->speed = CBR_1200; break;
|
|
case B1800: pCh->speed = CBR_1800; break;
|
|
case B2400: pCh->speed = CBR_2400; break;
|
|
case B4800: pCh->speed = CBR_4800; break;
|
|
case B9600: pCh->speed = CBR_9600; break;
|
|
case B19200: pCh->speed = CBR_19200; break;
|
|
case B57600: pCh->speed = CBR_57600; break;
|
|
case B115200: pCh->speed = CBR_115200; break;
|
|
case B153600: pCh->speed = CBR_153600; break;
|
|
case B230400: pCh->speed = CBR_230400; break;
|
|
case B307200: pCh->speed = CBR_307200; break;
|
|
case B460800: pCh->speed = CBR_460800; break;
|
|
case B921600: pCh->speed = CBR_921600; break;
|
|
default: pCh->speed = CBR_9600; break;
|
|
}
|
|
if ( pCh->speed == CBR_C1 ) {
|
|
// Process the custom speed parameters.
|
|
int bps = pCh->BaudBase / pCh->BaudDivisor;
|
|
if ( bps == 921600 ) {
|
|
pCh->speed = CBR_921600;
|
|
} else {
|
|
bps = bps/10;
|
|
i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) );
|
|
}
|
|
}
|
|
i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed));
|
|
|
|
i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
|
|
pCh->dataSetOut |= (I2_DTR | I2_RTS);
|
|
}
|
|
if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag))
|
|
{
|
|
i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
|
|
CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1));
|
|
}
|
|
if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag))
|
|
{
|
|
i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
|
|
CMD_SETPAR(
|
|
(cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP)
|
|
)
|
|
);
|
|
}
|
|
/* byte size and parity */
|
|
if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag))
|
|
{
|
|
int datasize;
|
|
switch ( cflag & CSIZE ) {
|
|
case CS5: datasize = CSZ_5; break;
|
|
case CS6: datasize = CSZ_6; break;
|
|
case CS7: datasize = CSZ_7; break;
|
|
case CS8: datasize = CSZ_8; break;
|
|
default: datasize = CSZ_5; break; /* as per serial.c */
|
|
}
|
|
i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) );
|
|
}
|
|
/* Process CTS flow control flag setting */
|
|
if ( (cflag & CRTSCTS) ) {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100,
|
|
2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB);
|
|
} else {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100,
|
|
2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
|
|
}
|
|
//
|
|
// Process XON/XOFF flow control flags settings
|
|
//
|
|
stop_char = STOP_CHAR(pCh->pTTY);
|
|
start_char = START_CHAR(pCh->pTTY);
|
|
|
|
//////////// can't be \000
|
|
if (stop_char == __DISABLED_CHAR )
|
|
{
|
|
stop_char = ~__DISABLED_CHAR;
|
|
}
|
|
if (start_char == __DISABLED_CHAR )
|
|
{
|
|
start_char = ~__DISABLED_CHAR;
|
|
}
|
|
/////////////////////////////////
|
|
|
|
if ( o_tios->c_cc[VSTART] != start_char )
|
|
{
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char));
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char));
|
|
}
|
|
if ( o_tios->c_cc[VSTOP] != stop_char )
|
|
{
|
|
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char));
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char));
|
|
}
|
|
if (stop_char == __DISABLED_CHAR )
|
|
{
|
|
stop_char = ~__DISABLED_CHAR; //TEST123
|
|
goto no_xoff;
|
|
}
|
|
if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF)))
|
|
{
|
|
if ( iflag & IXOFF ) { // Enable XOFF output flow control
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON));
|
|
} else { // Disable XOFF output flow control
|
|
no_xoff:
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE));
|
|
}
|
|
}
|
|
if (start_char == __DISABLED_CHAR )
|
|
{
|
|
goto no_xon;
|
|
}
|
|
if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY)))
|
|
{
|
|
if ( iflag & IXON ) {
|
|
if ( iflag & IXANY ) { // Enable XON/XANY output flow control
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY));
|
|
} else { // Enable XON output flow control
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON));
|
|
}
|
|
} else { // Disable XON output flow control
|
|
no_xon:
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE));
|
|
}
|
|
}
|
|
if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) )
|
|
{
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
|
|
CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0)));
|
|
}
|
|
if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) )
|
|
{
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
|
|
CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB));
|
|
}
|
|
|
|
if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR))
|
|
^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) )
|
|
{
|
|
char brkrpt = 0;
|
|
char parrpt = 0;
|
|
|
|
if ( iflag & IGNBRK ) { /* Ignore breaks altogether */
|
|
/* Ignore breaks altogether */
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP);
|
|
} else {
|
|
if ( iflag & BRKINT ) {
|
|
if ( iflag & PARMRK ) {
|
|
brkrpt = 0x0a; // exception an inline triple
|
|
} else {
|
|
brkrpt = 0x1a; // exception and NULL
|
|
}
|
|
brkrpt |= 0x04; // flush input
|
|
} else {
|
|
if ( iflag & PARMRK ) {
|
|
brkrpt = 0x0b; //POSIX triple \0377 \0 \0
|
|
} else {
|
|
brkrpt = 0x01; // Null only
|
|
}
|
|
}
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt));
|
|
}
|
|
|
|
if (iflag & IGNPAR) {
|
|
parrpt = 0x20;
|
|
/* would be 2 for not cirrus bug */
|
|
/* would be 0x20 cept for cirrus bug */
|
|
} else {
|
|
if ( iflag & PARMRK ) {
|
|
/*
|
|
* Replace error characters with 3-byte sequence (\0377,\0,char)
|
|
*/
|
|
parrpt = 0x04 ;
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0));
|
|
} else {
|
|
parrpt = 0x03;
|
|
}
|
|
}
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt));
|
|
}
|
|
if (cflag & CLOCAL) {
|
|
// Status reporting fails for DCD if this is off
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP);
|
|
pCh->flags &= ~ASYNC_CHECK_CD;
|
|
} else {
|
|
i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP);
|
|
pCh->flags |= ASYNC_CHECK_CD;
|
|
}
|
|
|
|
service_it:
|
|
i2DrainOutput( pCh, 100 );
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* IPL Device Section */
|
|
/******************************************************************************/
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_ipl_read() */
|
|
/* Parameters: Pointer to device inode */
|
|
/* Pointer to file structure */
|
|
/* Pointer to data */
|
|
/* Number of bytes to read */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: Ugly */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
|
|
static
|
|
ssize_t
|
|
ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
|
|
{
|
|
unsigned int minor = iminor(pFile->f_path.dentry->d_inode);
|
|
int rc = 0;
|
|
|
|
#ifdef IP2DEBUG_IPL
|
|
printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count );
|
|
#endif
|
|
|
|
switch( minor ) {
|
|
case 0: // IPL device
|
|
rc = -EINVAL;
|
|
break;
|
|
case 1: // Status dump
|
|
rc = -EINVAL;
|
|
break;
|
|
case 2: // Ping device
|
|
rc = -EINVAL;
|
|
break;
|
|
case 3: // Trace device
|
|
rc = DumpTraceBuffer ( pData, count );
|
|
break;
|
|
case 4: // Trace device
|
|
rc = DumpFifoBuffer ( pData, count );
|
|
break;
|
|
default:
|
|
rc = -ENODEV;
|
|
break;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
DumpFifoBuffer ( char __user *pData, int count )
|
|
{
|
|
#ifdef DEBUG_FIFO
|
|
int rc;
|
|
rc = copy_to_user(pData, DBGBuf, count);
|
|
|
|
printk(KERN_DEBUG "Last index %d\n", I );
|
|
|
|
return count;
|
|
#endif /* DEBUG_FIFO */
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
DumpTraceBuffer ( char __user *pData, int count )
|
|
{
|
|
#ifdef IP2DEBUG_TRACE
|
|
int rc;
|
|
int dumpcount;
|
|
int chunk;
|
|
int *pIndex = (int __user *)pData;
|
|
|
|
if ( count < (sizeof(int) * 6) ) {
|
|
return -EIO;
|
|
}
|
|
rc = put_user(tracewrap, pIndex );
|
|
rc = put_user(TRACEMAX, ++pIndex );
|
|
rc = put_user(tracestrip, ++pIndex );
|
|
rc = put_user(tracestuff, ++pIndex );
|
|
pData += sizeof(int) * 6;
|
|
count -= sizeof(int) * 6;
|
|
|
|
dumpcount = tracestuff - tracestrip;
|
|
if ( dumpcount < 0 ) {
|
|
dumpcount += TRACEMAX;
|
|
}
|
|
if ( dumpcount > count ) {
|
|
dumpcount = count;
|
|
}
|
|
chunk = TRACEMAX - tracestrip;
|
|
if ( dumpcount > chunk ) {
|
|
rc = copy_to_user(pData, &tracebuf[tracestrip],
|
|
chunk * sizeof(tracebuf[0]) );
|
|
pData += chunk * sizeof(tracebuf[0]);
|
|
tracestrip = 0;
|
|
chunk = dumpcount - chunk;
|
|
} else {
|
|
chunk = dumpcount;
|
|
}
|
|
rc = copy_to_user(pData, &tracebuf[tracestrip],
|
|
chunk * sizeof(tracebuf[0]) );
|
|
tracestrip += chunk;
|
|
tracewrap = 0;
|
|
|
|
rc = put_user(tracestrip, ++pIndex );
|
|
rc = put_user(tracestuff, ++pIndex );
|
|
|
|
return dumpcount;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_ipl_write() */
|
|
/* Parameters: */
|
|
/* Pointer to file structure */
|
|
/* Pointer to data */
|
|
/* Number of bytes to write */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static ssize_t
|
|
ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off)
|
|
{
|
|
#ifdef IP2DEBUG_IPL
|
|
printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count );
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_ipl_ioctl() */
|
|
/* Parameters: Pointer to device inode */
|
|
/* Pointer to file structure */
|
|
/* Command */
|
|
/* Argument */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static long
|
|
ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg )
|
|
{
|
|
unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode);
|
|
int rc = 0;
|
|
void __user *argp = (void __user *)arg;
|
|
ULONG __user *pIndex = argp;
|
|
i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4];
|
|
i2ChanStrPtr pCh;
|
|
|
|
#ifdef IP2DEBUG_IPL
|
|
printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
|
|
#endif
|
|
|
|
lock_kernel();
|
|
|
|
switch ( iplminor ) {
|
|
case 0: // IPL device
|
|
rc = -EINVAL;
|
|
break;
|
|
case 1: // Status dump
|
|
case 5:
|
|
case 9:
|
|
case 13:
|
|
switch ( cmd ) {
|
|
case 64: /* Driver - ip2stat */
|
|
rc = put_user(-1, pIndex++ );
|
|
rc = put_user(irq_counter, pIndex++ );
|
|
rc = put_user(bh_counter, pIndex++ );
|
|
break;
|
|
|
|
case 65: /* Board - ip2stat */
|
|
if ( pB ) {
|
|
rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
|
|
rc = put_user(inb(pB->i2eStatus),
|
|
(ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
|
|
} else {
|
|
rc = -ENODEV;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
if (cmd < IP2_MAX_PORTS) {
|
|
pCh = DevTable[cmd];
|
|
if ( pCh )
|
|
{
|
|
rc = copy_to_user(argp, pCh, sizeof(i2ChanStr));
|
|
} else {
|
|
rc = -ENODEV;
|
|
}
|
|
} else {
|
|
rc = -EINVAL;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 2: // Ping device
|
|
rc = -EINVAL;
|
|
break;
|
|
case 3: // Trace device
|
|
/*
|
|
* akpm: This used to write a whole bunch of function addresses
|
|
* to userspace, which generated lots of put_user() warnings.
|
|
* I killed it all. Just return "success" and don't do
|
|
* anything.
|
|
*/
|
|
if (cmd == 1)
|
|
rc = 0;
|
|
else
|
|
rc = -EINVAL;
|
|
break;
|
|
|
|
default:
|
|
rc = -ENODEV;
|
|
break;
|
|
}
|
|
unlock_kernel();
|
|
return rc;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2_ipl_open() */
|
|
/* Parameters: Pointer to device inode */
|
|
/* Pointer to file structure */
|
|
/* Returns: Success or failure */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
static int
|
|
ip2_ipl_open( struct inode *pInode, struct file *pFile )
|
|
{
|
|
|
|
#ifdef IP2DEBUG_IPL
|
|
printk (KERN_DEBUG "IP2IPL: open\n" );
|
|
#endif
|
|
cycle_kernel_lock();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
proc_ip2mem_show(struct seq_file *m, void *v)
|
|
{
|
|
i2eBordStrPtr pB;
|
|
i2ChanStrPtr pCh;
|
|
PTTY tty;
|
|
int i;
|
|
|
|
#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
|
|
#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n"
|
|
#define FMTLIN3 " 0x%04x 0x%04x rc flow\n"
|
|
|
|
seq_printf(m,"\n");
|
|
|
|
for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
|
|
pB = i2BoardPtrTable[i];
|
|
if ( pB ) {
|
|
seq_printf(m,"board %d:\n",i);
|
|
seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n",
|
|
pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
|
|
}
|
|
}
|
|
|
|
seq_printf(m,"#: tty flags, port flags, cflags, iflags\n");
|
|
for (i=0; i < IP2_MAX_PORTS; i++) {
|
|
pCh = DevTable[i];
|
|
if (pCh) {
|
|
tty = pCh->pTTY;
|
|
if (tty && tty->count) {
|
|
seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags,
|
|
tty->termios->c_cflag,tty->termios->c_iflag);
|
|
|
|
seq_printf(m,FMTLIN2,
|
|
pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
|
|
seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room);
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int proc_ip2mem_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, proc_ip2mem_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations ip2mem_proc_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = proc_ip2mem_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*
|
|
* This is the handler for /proc/tty/driver/ip2
|
|
*
|
|
* This stretch of code has been largely plagerized from at least three
|
|
* different sources including ip2mkdev.c and a couple of other drivers.
|
|
* The bugs are all mine. :-) =mhw=
|
|
*/
|
|
static int ip2_proc_show(struct seq_file *m, void *v)
|
|
{
|
|
int i, j, box;
|
|
int boxes = 0;
|
|
int ports = 0;
|
|
int tports = 0;
|
|
i2eBordStrPtr pB;
|
|
char *sep;
|
|
|
|
seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion);
|
|
seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n",
|
|
IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR,
|
|
IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX);
|
|
|
|
for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
|
|
/* This need to be reset for a board by board count... */
|
|
boxes = 0;
|
|
pB = i2BoardPtrTable[i];
|
|
if( pB ) {
|
|
switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED )
|
|
{
|
|
case POR_ID_FIIEX:
|
|
seq_printf(m, "Board %d: EX ports=", i);
|
|
sep = "";
|
|
for( box = 0; box < ABS_MAX_BOXES; ++box )
|
|
{
|
|
ports = 0;
|
|
|
|
if( pB->i2eChannelMap[box] != 0 ) ++boxes;
|
|
for( j = 0; j < ABS_BIGGEST_BOX; ++j )
|
|
{
|
|
if( pB->i2eChannelMap[box] & 1<< j ) {
|
|
++ports;
|
|
}
|
|
}
|
|
seq_printf(m, "%s%d", sep, ports);
|
|
sep = ",";
|
|
tports += ports;
|
|
}
|
|
seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8);
|
|
break;
|
|
|
|
case POR_ID_II_4:
|
|
seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i);
|
|
tports = ports = 4;
|
|
break;
|
|
|
|
case POR_ID_II_8:
|
|
seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i);
|
|
tports = ports = 8;
|
|
break;
|
|
|
|
case POR_ID_II_8R:
|
|
seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i);
|
|
tports = ports = 8;
|
|
break;
|
|
|
|
default:
|
|
seq_printf(m, "Board %d: unknown", i);
|
|
/* Don't try and probe for minor numbers */
|
|
tports = ports = 0;
|
|
}
|
|
|
|
} else {
|
|
/* Don't try and probe for minor numbers */
|
|
seq_printf(m, "Board %d: vacant", i);
|
|
tports = ports = 0;
|
|
}
|
|
|
|
if( tports ) {
|
|
seq_puts(m, " minors=");
|
|
sep = "";
|
|
for ( box = 0; box < ABS_MAX_BOXES; ++box )
|
|
{
|
|
for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
|
|
{
|
|
if ( pB->i2eChannelMap[box] & (1 << j) )
|
|
{
|
|
seq_printf(m, "%s%d", sep,
|
|
j + ABS_BIGGEST_BOX *
|
|
(box+i*ABS_MAX_BOXES));
|
|
sep = ",";
|
|
}
|
|
}
|
|
}
|
|
}
|
|
seq_putc(m, '\n');
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ip2_proc_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, ip2_proc_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations ip2_proc_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = ip2_proc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/******************************************************************************/
|
|
/* Function: ip2trace() */
|
|
/* Parameters: Value to add to trace buffer */
|
|
/* Returns: Nothing */
|
|
/* */
|
|
/* Description: */
|
|
/* */
|
|
/* */
|
|
/******************************************************************************/
|
|
#ifdef IP2DEBUG_TRACE
|
|
void
|
|
ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...)
|
|
{
|
|
long flags;
|
|
unsigned long *pCode = &codes;
|
|
union ip2breadcrumb bc;
|
|
i2ChanStrPtr pCh;
|
|
|
|
|
|
tracebuf[tracestuff++] = jiffies;
|
|
if ( tracestuff == TRACEMAX ) {
|
|
tracestuff = 0;
|
|
}
|
|
if ( tracestuff == tracestrip ) {
|
|
if ( ++tracestrip == TRACEMAX ) {
|
|
tracestrip = 0;
|
|
}
|
|
++tracewrap;
|
|
}
|
|
|
|
bc.hdr.port = 0xff & pn;
|
|
bc.hdr.cat = cat;
|
|
bc.hdr.codes = (unsigned char)( codes & 0xff );
|
|
bc.hdr.label = label;
|
|
tracebuf[tracestuff++] = bc.value;
|
|
|
|
for (;;) {
|
|
if ( tracestuff == TRACEMAX ) {
|
|
tracestuff = 0;
|
|
}
|
|
if ( tracestuff == tracestrip ) {
|
|
if ( ++tracestrip == TRACEMAX ) {
|
|
tracestrip = 0;
|
|
}
|
|
++tracewrap;
|
|
}
|
|
|
|
if ( !codes-- )
|
|
break;
|
|
|
|
tracebuf[tracestuff++] = *++pCode;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
|