kernel_optimize_test/arch/powerpc/platforms/cell/Kconfig
Benjamin Krill def434c231 powerpc/cell: add QPACE as a separate Cell platform
Since the QPACE (Chromodynamics Parallel Computing on the
Cell Broadband Engine) platform doesn't use a iommu, doesn't
have PCI devices and a MPIC much lesser setup and
configurations are needed. So far all devices are detected
as OF device. A notifier function is used to set the dma_ops
for the of_platform bus. Further this patch splits the
PPC_CELL_NATIVE into PPC_CELL_COMMON which are parts that are
shared with the QPACE platform and the rest.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-12-22 22:19:19 +01:00

146 lines
3.8 KiB
Plaintext

config PPC_CELL
bool
default n
config PPC_CELL_COMMON
bool
select PPC_CELL
select PPC_DCR_MMIO
select PPC_INDIRECT_IO
select PPC_NATIVE
select PPC_RTAS
config PPC_CELL_NATIVE
bool
select PPC_CELL_COMMON
select PPC_OF_PLATFORM_PCI
select MPIC
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
select IBM_NEW_EMAC_ZMII #test only
select IBM_NEW_EMAC_TAH #test only
default n
config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL_NATIVE
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
config PPC_CELLEB
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL_NATIVE
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_MMIO
config PPC_CELL_QPACE
bool "IBM Cell - QPACE"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL_COMMON
menu "Cell Broadband Engine options"
depends on PPC_CELL
config SPU_FS
tristate "SPU file system"
default m
depends on PPC_CELL
select SPU_BASE
select MEMORY_HOTPLUG
help
The SPU file system is used to access Synergistic Processing
Units on machines implementing the Broadband Processor
Architecture.
config SPU_FS_64K_LS
bool "Use 64K pages to map SPE local store"
# we depend on PPC_MM_SLICES for now rather than selecting
# it because we depend on hugetlbfs hooks being present. We
# will fix that when the generic code has been improved to
# not require hijacking hugetlbfs hooks.
depends on SPU_FS && PPC_MM_SLICES && !PPC_64K_PAGES
default y
select PPC_HAS_HASH_64K
help
This option causes SPE local stores to be mapped in process
address spaces using 64K pages while the rest of the kernel
uses 4K pages. This can improve performances of applications
using multiple SPEs by lowering the TLB pressure on them.
config SPU_TRACE
tristate "SPU event tracing support"
depends on SPU_FS && MARKERS
help
This option allows reading a trace of spu-related events through
the sputrace file in procfs.
config SPU_BASE
bool
default n
config CBE_RAS
bool "RAS features for bare metal Cell BE"
depends on PPC_CELL_NATIVE
default y
config PPC_IBM_CELL_RESETBUTTON
bool "IBM Cell Blade Pinhole reset button"
depends on CBE_RAS && PPC_IBM_CELL_BLADE
default y
help
Support Pinhole Resetbutton on IBM Cell blades.
This adds a method to trigger system reset via front panel pinhole button.
config PPC_IBM_CELL_POWERBUTTON
tristate "IBM Cell Blade power button"
depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
default y
help
Support Powerbutton on IBM Cell blades.
This will enable the powerbutton as an input device.
config CBE_THERM
tristate "CBE thermal support"
default m
depends on CBE_RAS && SPU_BASE
config CBE_CPUFREQ
tristate "CBE frequency scaling"
depends on CBE_RAS && CPU_FREQ
default m
help
This adds the cpufreq driver for Cell BE processors.
For details, take a look at <file:Documentation/cpu-freq/>.
If you don't have such processor, say N
config CBE_CPUFREQ_PMI
tristate "CBE frequency scaling using PMI interface"
depends on CBE_CPUFREQ && PPC_PMI && EXPERIMENTAL
default n
help
Select this, if you want to use the PMI interface
to switch frequencies. Using PMI, the
processor will not only be able to run at lower speed,
but also at lower core voltage.
config CBE_CPUFREQ_SPU_GOVERNOR
tristate "CBE frequency scaling based on SPU usage"
depends on SPU_FS && CPU_FREQ
default m
help
This governor checks for spu usage to adjust the cpu frequency.
If no spu is running on a given cpu, that cpu will be throttled to
the minimal possible frequency.
endmenu
config OPROFILE_CELL
def_bool y
depends on PPC_CELL_NATIVE && (OPROFILE = m || OPROFILE = y) && SPU_BASE