kernel_optimize_test/drivers/i2c/i2c-stub.c
Jean Delvare 0f6ba0d15f i2c: stub: Avoid an array overrun on I2C block transfers
I2C block transfers can have a size up to 32 bytes. If starting close
to the end of the address space, there may not be enough room to write
that many bytes (on I2C block writes) or not enough bytes to be read
(on I2C block reads.) In that case, we must shorten the transfer so
that it does not exceed the address space.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-20 13:25:29 +02:00

426 lines
10 KiB
C

/*
i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
Copyright (C) 2007-2014 Jean Delvare <jdelvare@suse.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define DEBUG 1
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/list.h>
#define MAX_CHIPS 10
/*
* Support for I2C_FUNC_SMBUS_BLOCK_DATA is disabled by default and must
* be enabled explicitly by setting the I2C_FUNC_SMBUS_BLOCK_DATA bits
* in the 'functionality' module parameter.
*/
#define STUB_FUNC_DEFAULT \
(I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
#define STUB_FUNC_ALL \
(STUB_FUNC_DEFAULT | I2C_FUNC_SMBUS_BLOCK_DATA)
static unsigned short chip_addr[MAX_CHIPS];
module_param_array(chip_addr, ushort, NULL, S_IRUGO);
MODULE_PARM_DESC(chip_addr,
"Chip addresses (up to 10, between 0x03 and 0x77)");
static unsigned long functionality = STUB_FUNC_DEFAULT;
module_param(functionality, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(functionality, "Override functionality bitfield");
/* Some chips have banked register ranges */
static u8 bank_reg[MAX_CHIPS];
module_param_array(bank_reg, byte, NULL, S_IRUGO);
MODULE_PARM_DESC(bank_reg, "Bank register");
static u8 bank_mask[MAX_CHIPS];
module_param_array(bank_mask, byte, NULL, S_IRUGO);
MODULE_PARM_DESC(bank_mask, "Bank value mask");
static u8 bank_start[MAX_CHIPS];
module_param_array(bank_start, byte, NULL, S_IRUGO);
MODULE_PARM_DESC(bank_start, "First banked register");
static u8 bank_end[MAX_CHIPS];
module_param_array(bank_end, byte, NULL, S_IRUGO);
MODULE_PARM_DESC(bank_end, "Last banked register");
struct smbus_block_data {
struct list_head node;
u8 command;
u8 len;
u8 block[I2C_SMBUS_BLOCK_MAX];
};
struct stub_chip {
u8 pointer;
u16 words[256]; /* Byte operations use the LSB as per SMBus
specification */
struct list_head smbus_blocks;
/* For chips with banks, extra registers are allocated dynamically */
u8 bank_reg;
u8 bank_shift;
u8 bank_mask;
u8 bank_sel; /* Currently selected bank */
u8 bank_start;
u8 bank_end;
u16 bank_size;
u16 *bank_words; /* Room for bank_mask * bank_size registers */
};
static struct stub_chip *stub_chips;
static int stub_chips_nr;
static struct smbus_block_data *stub_find_block(struct device *dev,
struct stub_chip *chip,
u8 command, bool create)
{
struct smbus_block_data *b, *rb = NULL;
list_for_each_entry(b, &chip->smbus_blocks, node) {
if (b->command == command) {
rb = b;
break;
}
}
if (rb == NULL && create) {
rb = devm_kzalloc(dev, sizeof(*rb), GFP_KERNEL);
if (rb == NULL)
return rb;
rb->command = command;
list_add(&rb->node, &chip->smbus_blocks);
}
return rb;
}
static u16 *stub_get_wordp(struct stub_chip *chip, u8 offset)
{
if (chip->bank_sel &&
offset >= chip->bank_start && offset <= chip->bank_end)
return chip->bank_words +
(chip->bank_sel - 1) * chip->bank_size +
offset - chip->bank_start;
else
return chip->words + offset;
}
/* Return negative errno on error. */
static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data *data)
{
s32 ret;
int i, len;
struct stub_chip *chip = NULL;
struct smbus_block_data *b;
u16 *wordp;
/* Search for the right chip */
for (i = 0; i < stub_chips_nr; i++) {
if (addr == chip_addr[i]) {
chip = stub_chips + i;
break;
}
}
if (!chip)
return -ENODEV;
switch (size) {
case I2C_SMBUS_QUICK:
dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr);
ret = 0;
break;
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
chip->pointer = command;
dev_dbg(&adap->dev,
"smbus byte - addr 0x%02x, wrote 0x%02x.\n",
addr, command);
} else {
wordp = stub_get_wordp(chip, chip->pointer++);
data->byte = *wordp & 0xff;
dev_dbg(&adap->dev,
"smbus byte - addr 0x%02x, read 0x%02x.\n",
addr, data->byte);
}
ret = 0;
break;
case I2C_SMBUS_BYTE_DATA:
wordp = stub_get_wordp(chip, command);
if (read_write == I2C_SMBUS_WRITE) {
*wordp &= 0xff00;
*wordp |= data->byte;
dev_dbg(&adap->dev,
"smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
addr, data->byte, command);
/* Set the bank as needed */
if (chip->bank_words && command == chip->bank_reg) {
chip->bank_sel =
(data->byte >> chip->bank_shift)
& chip->bank_mask;
dev_dbg(&adap->dev,
"switching to bank %u.\n",
chip->bank_sel);
}
} else {
data->byte = *wordp & 0xff;
dev_dbg(&adap->dev,
"smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
addr, data->byte, command);
}
chip->pointer = command + 1;
ret = 0;
break;
case I2C_SMBUS_WORD_DATA:
wordp = stub_get_wordp(chip, command);
if (read_write == I2C_SMBUS_WRITE) {
*wordp = data->word;
dev_dbg(&adap->dev,
"smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
addr, data->word, command);
} else {
data->word = *wordp;
dev_dbg(&adap->dev,
"smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
addr, data->word, command);
}
ret = 0;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
/*
* We ignore banks here, because banked chips don't use I2C
* block transfers
*/
if (data->block[0] > 256 - command) /* Avoid overrun */
data->block[0] = 256 - command;
len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
for (i = 0; i < len; i++) {
chip->words[command + i] &= 0xff00;
chip->words[command + i] |= data->block[1 + i];
}
dev_dbg(&adap->dev,
"i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
addr, len, command);
} else {
for (i = 0; i < len; i++) {
data->block[1 + i] =
chip->words[command + i] & 0xff;
}
dev_dbg(&adap->dev,
"i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
addr, len, command);
}
ret = 0;
break;
case I2C_SMBUS_BLOCK_DATA:
/*
* We ignore banks here, because chips typically don't use both
* banks and SMBus block transfers
*/
b = stub_find_block(&adap->dev, chip, command, false);
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) {
ret = -EINVAL;
break;
}
if (b == NULL) {
b = stub_find_block(&adap->dev, chip, command,
true);
if (b == NULL) {
ret = -ENOMEM;
break;
}
}
/* Largest write sets read block length */
if (len > b->len)
b->len = len;
for (i = 0; i < len; i++)
b->block[i] = data->block[i + 1];
/* update for byte and word commands */
chip->words[command] = (b->block[0] << 8) | b->len;
dev_dbg(&adap->dev,
"smbus block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
addr, len, command);
} else {
if (b == NULL) {
dev_dbg(&adap->dev,
"SMBus block read command without prior block write not supported\n");
ret = -EOPNOTSUPP;
break;
}
len = b->len;
data->block[0] = len;
for (i = 0; i < len; i++)
data->block[i + 1] = b->block[i];
dev_dbg(&adap->dev,
"smbus block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
addr, len, command);
}
ret = 0;
break;
default:
dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
ret = -EOPNOTSUPP;
break;
} /* switch (size) */
return ret;
}
static u32 stub_func(struct i2c_adapter *adapter)
{
return STUB_FUNC_ALL & functionality;
}
static const struct i2c_algorithm smbus_algorithm = {
.functionality = stub_func,
.smbus_xfer = stub_xfer,
};
static struct i2c_adapter stub_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
.name = "SMBus stub driver",
};
static int __init i2c_stub_allocate_banks(int i)
{
struct stub_chip *chip = stub_chips + i;
chip->bank_reg = bank_reg[i];
chip->bank_start = bank_start[i];
chip->bank_end = bank_end[i];
chip->bank_size = bank_end[i] - bank_start[i] + 1;
/* We assume that all bits in the mask are contiguous */
chip->bank_mask = bank_mask[i];
while (!(chip->bank_mask & 1)) {
chip->bank_shift++;
chip->bank_mask >>= 1;
}
chip->bank_words = kzalloc(chip->bank_mask * chip->bank_size *
sizeof(u16), GFP_KERNEL);
if (!chip->bank_words)
return -ENOMEM;
pr_debug("i2c-stub: Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
chip->bank_mask, chip->bank_size, chip->bank_start,
chip->bank_end);
return 0;
}
static void i2c_stub_free(void)
{
int i;
for (i = 0; i < stub_chips_nr; i++)
kfree(stub_chips[i].bank_words);
kfree(stub_chips);
}
static int __init i2c_stub_init(void)
{
int i, ret;
if (!chip_addr[0]) {
pr_err("i2c-stub: Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
pr_err("i2c-stub: Invalid chip address 0x%02x\n",
chip_addr[i]);
return -EINVAL;
}
pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips_nr = i;
stub_chips = kcalloc(stub_chips_nr, sizeof(struct stub_chip),
GFP_KERNEL);
if (!stub_chips) {
pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
for (i = 0; i < stub_chips_nr; i++) {
INIT_LIST_HEAD(&stub_chips[i].smbus_blocks);
/* Allocate extra memory for banked register ranges */
if (bank_mask[i]) {
ret = i2c_stub_allocate_banks(i);
if (ret)
goto fail_free;
}
}
ret = i2c_add_adapter(&stub_adapter);
if (ret)
goto fail_free;
return 0;
fail_free:
i2c_stub_free();
return ret;
}
static void __exit i2c_stub_exit(void)
{
i2c_del_adapter(&stub_adapter);
i2c_stub_free();
}
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
MODULE_DESCRIPTION("I2C stub driver");
MODULE_LICENSE("GPL");
module_init(i2c_stub_init);
module_exit(i2c_stub_exit);