forked from luck/tmp_suning_uos_patched
9cd11c0c47
This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6 K5TCDS2v5hrVykK9TDwl =Tc6y -----END PGP SIGNATURE----- Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
648 lines
18 KiB
C
648 lines
18 KiB
C
/*
|
|
* Freescale eSDHC i.MX controller driver for the platform bus.
|
|
*
|
|
* derived from the OF-version.
|
|
*
|
|
* Copyright (c) 2010 Pengutronix e.K.
|
|
* Author: Wolfram Sang <w.sang@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_data/mmc-esdhc-imx.h>
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci-esdhc.h"
|
|
|
|
#define SDHCI_CTRL_D3CD 0x08
|
|
/* VENDOR SPEC register */
|
|
#define SDHCI_VENDOR_SPEC 0xC0
|
|
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
|
|
#define SDHCI_WTMK_LVL 0x44
|
|
#define SDHCI_MIX_CTRL 0x48
|
|
|
|
/*
|
|
* There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
|
|
* Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
|
|
* but bit28 is used as the INT DMA ERR in fsl eSDHC design.
|
|
* Define this macro DMA error INT for fsl eSDHC
|
|
*/
|
|
#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000
|
|
|
|
/*
|
|
* The CMDTYPE of the CMD register (offset 0xE) should be set to
|
|
* "11" when the STOP CMD12 is issued on imx53 to abort one
|
|
* open ended multi-blk IO. Otherwise the TC INT wouldn't
|
|
* be generated.
|
|
* In exact block transfer, the controller doesn't complete the
|
|
* operations automatically as required at the end of the
|
|
* transfer and remains on hold if the abort command is not sent.
|
|
* As a result, the TC flag is not asserted and SW received timeout
|
|
* exeception. Bit1 of Vendor Spec registor is used to fix it.
|
|
*/
|
|
#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
|
|
|
|
enum imx_esdhc_type {
|
|
IMX25_ESDHC,
|
|
IMX35_ESDHC,
|
|
IMX51_ESDHC,
|
|
IMX53_ESDHC,
|
|
IMX6Q_USDHC,
|
|
};
|
|
|
|
struct pltfm_imx_data {
|
|
int flags;
|
|
u32 scratchpad;
|
|
enum imx_esdhc_type devtype;
|
|
struct pinctrl *pinctrl;
|
|
struct esdhc_platform_data boarddata;
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_ahb;
|
|
struct clk *clk_per;
|
|
};
|
|
|
|
static struct platform_device_id imx_esdhc_devtype[] = {
|
|
{
|
|
.name = "sdhci-esdhc-imx25",
|
|
.driver_data = IMX25_ESDHC,
|
|
}, {
|
|
.name = "sdhci-esdhc-imx35",
|
|
.driver_data = IMX35_ESDHC,
|
|
}, {
|
|
.name = "sdhci-esdhc-imx51",
|
|
.driver_data = IMX51_ESDHC,
|
|
}, {
|
|
.name = "sdhci-esdhc-imx53",
|
|
.driver_data = IMX53_ESDHC,
|
|
}, {
|
|
.name = "sdhci-usdhc-imx6q",
|
|
.driver_data = IMX6Q_USDHC,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);
|
|
|
|
static const struct of_device_id imx_esdhc_dt_ids[] = {
|
|
{ .compatible = "fsl,imx25-esdhc", .data = &imx_esdhc_devtype[IMX25_ESDHC], },
|
|
{ .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], },
|
|
{ .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], },
|
|
{ .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], },
|
|
{ .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
|
|
|
|
static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX25_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx35_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX35_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx51_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX51_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX53_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX6Q_USDHC;
|
|
}
|
|
|
|
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
|
|
{
|
|
void __iomem *base = host->ioaddr + (reg & ~0x3);
|
|
u32 shift = (reg & 0x3) * 8;
|
|
|
|
writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
|
|
}
|
|
|
|
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
|
|
/* fake CARD_PRESENT flag */
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (unlikely((reg == SDHCI_PRESENT_STATE)
|
|
&& gpio_is_valid(boarddata->cd_gpio))) {
|
|
if (gpio_get_value(boarddata->cd_gpio))
|
|
/* no card, if a valid gpio says so... */
|
|
val &= ~SDHCI_CARD_PRESENT;
|
|
else
|
|
/* ... in all other cases assume card is present */
|
|
val |= SDHCI_CARD_PRESENT;
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_CAPABILITIES)) {
|
|
/* In FSL esdhc IC module, only bit20 is used to indicate the
|
|
* ADMA2 capability of esdhc, but this bit is messed up on
|
|
* some SOCs (e.g. on MX25, MX35 this bit is set, but they
|
|
* don't actually support ADMA2). So set the BROKEN_ADMA
|
|
* uirk on MX25/35 platforms.
|
|
*/
|
|
|
|
if (val & SDHCI_CAN_DO_ADMA1) {
|
|
val &= ~SDHCI_CAN_DO_ADMA1;
|
|
val |= SDHCI_CAN_DO_ADMA2;
|
|
}
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_INT_STATUS)) {
|
|
if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
|
|
val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
|
|
val |= SDHCI_INT_ADMA_ERROR;
|
|
}
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
u32 data;
|
|
|
|
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
|
|
if (boarddata->cd_type == ESDHC_CD_GPIO)
|
|
/*
|
|
* These interrupts won't work with a custom
|
|
* card_detect gpio (only applied to mx25/35)
|
|
*/
|
|
val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
|
|
|
|
if (val & SDHCI_INT_CARD_INT) {
|
|
/*
|
|
* Clear and then set D3CD bit to avoid missing the
|
|
* card interrupt. This is a eSDHC controller problem
|
|
* so we need to apply the following workaround: clear
|
|
* and set D3CD bit will make eSDHC re-sample the card
|
|
* interrupt. In case a card interrupt was lost,
|
|
* re-sample it by the following steps.
|
|
*/
|
|
data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
data &= ~SDHCI_CTRL_D3CD;
|
|
writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
data |= SDHCI_CTRL_D3CD;
|
|
writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
}
|
|
}
|
|
|
|
if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (reg == SDHCI_INT_STATUS)
|
|
&& (val & SDHCI_INT_DATA_END))) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
|
|
if (val & SDHCI_INT_ADMA_ERROR) {
|
|
val &= ~SDHCI_INT_ADMA_ERROR;
|
|
val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
|
|
}
|
|
}
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(reg == SDHCI_HOST_VERSION)) {
|
|
u16 val = readw(host->ioaddr + (reg ^ 2));
|
|
/*
|
|
* uSDHC supports SDHCI v3.0, but it's encoded as value
|
|
* 0x3 in host controller version register, which violates
|
|
* SDHCI_SPEC_300 definition. Work it around here.
|
|
*/
|
|
if ((val & SDHCI_SPEC_VER_MASK) == 3)
|
|
return --val;
|
|
}
|
|
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
switch (reg) {
|
|
case SDHCI_TRANSFER_MODE:
|
|
/*
|
|
* Postpone this write, we must do it together with a
|
|
* command write that is down below.
|
|
*/
|
|
if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
|
|
&& (host->cmd->data->blocks > 1)
|
|
&& (host->cmd->data->flags & MMC_DATA_READ)) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
imx_data->scratchpad = val;
|
|
return;
|
|
case SDHCI_COMMAND:
|
|
if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
|
|
host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
|
|
(imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
|
|
val |= SDHCI_CMD_ABORTCMD;
|
|
|
|
if (is_imx6q_usdhc(imx_data)) {
|
|
u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL);
|
|
m = imx_data->scratchpad | (m & 0xffff0000);
|
|
writel(m, host->ioaddr + SDHCI_MIX_CTRL);
|
|
writel(val << 16,
|
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
} else {
|
|
writel(val << 16 | imx_data->scratchpad,
|
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
}
|
|
return;
|
|
case SDHCI_BLOCK_SIZE:
|
|
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
|
|
break;
|
|
}
|
|
esdhc_clrset_le(host, 0xffff, val, reg);
|
|
}
|
|
|
|
static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
u32 new_val;
|
|
|
|
switch (reg) {
|
|
case SDHCI_POWER_CONTROL:
|
|
/*
|
|
* FSL put some DMA bits here
|
|
* If your board has a regulator, code should be here
|
|
*/
|
|
return;
|
|
case SDHCI_HOST_CONTROL:
|
|
/* FSL messed up here, so we can just keep those three */
|
|
new_val = val & (SDHCI_CTRL_LED | \
|
|
SDHCI_CTRL_4BITBUS | \
|
|
SDHCI_CTRL_D3CD);
|
|
/* ensure the endianness */
|
|
new_val |= ESDHC_HOST_CONTROL_LE;
|
|
/* bits 8&9 are reserved on mx25 */
|
|
if (!is_imx25_esdhc(imx_data)) {
|
|
/* DMA mode bits are shifted */
|
|
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
|
|
}
|
|
|
|
esdhc_clrset_le(host, 0xffff, new_val, reg);
|
|
return;
|
|
}
|
|
esdhc_clrset_le(host, 0xff, val, reg);
|
|
|
|
/*
|
|
* The esdhc has a design violation to SDHC spec which tells
|
|
* that software reset should not affect card detection circuit.
|
|
* But esdhc clears its SYSCTL register bits [0..2] during the
|
|
* software reset. This will stop those clocks that card detection
|
|
* circuit relies on. To work around it, we turn the clocks on back
|
|
* to keep card detection circuit functional.
|
|
*/
|
|
if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
|
|
esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk) / 256 / 16;
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
|
|
switch (boarddata->wp_type) {
|
|
case ESDHC_WP_GPIO:
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
return gpio_get_value(boarddata->wp_gpio);
|
|
case ESDHC_WP_CONTROLLER:
|
|
return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
|
|
SDHCI_WRITE_PROTECT);
|
|
case ESDHC_WP_NONE:
|
|
break;
|
|
}
|
|
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_esdhc_ops = {
|
|
.read_l = esdhc_readl_le,
|
|
.read_w = esdhc_readw_le,
|
|
.write_l = esdhc_writel_le,
|
|
.write_w = esdhc_writew_le,
|
|
.write_b = esdhc_writeb_le,
|
|
.set_clock = esdhc_set_clock,
|
|
.get_max_clock = esdhc_pltfm_get_max_clock,
|
|
.get_min_clock = esdhc_pltfm_get_min_clock,
|
|
.get_ro = esdhc_pltfm_get_ro,
|
|
};
|
|
|
|
static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
|
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
|
|
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
|
|
| SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
|
|
| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
|
|
.ops = &sdhci_esdhc_ops,
|
|
};
|
|
|
|
static irqreturn_t cd_irq(int irq, void *data)
|
|
{
|
|
struct sdhci_host *sdhost = (struct sdhci_host *)data;
|
|
|
|
tasklet_schedule(&sdhost->card_tasklet);
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int __devinit
|
|
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
|
|
struct esdhc_platform_data *boarddata)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (of_get_property(np, "non-removable", NULL))
|
|
boarddata->cd_type = ESDHC_CD_PERMANENT;
|
|
|
|
if (of_get_property(np, "fsl,cd-controller", NULL))
|
|
boarddata->cd_type = ESDHC_CD_CONTROLLER;
|
|
|
|
if (of_get_property(np, "fsl,wp-controller", NULL))
|
|
boarddata->wp_type = ESDHC_WP_CONTROLLER;
|
|
|
|
boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
|
|
if (gpio_is_valid(boarddata->cd_gpio))
|
|
boarddata->cd_type = ESDHC_CD_GPIO;
|
|
|
|
boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
boarddata->wp_type = ESDHC_WP_GPIO;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int
|
|
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
|
|
struct esdhc_platform_data *boarddata)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(imx_esdhc_dt_ids, &pdev->dev);
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_host *host;
|
|
struct esdhc_platform_data *boarddata;
|
|
int err;
|
|
struct pltfm_imx_data *imx_data;
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
|
|
imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
|
|
if (!imx_data) {
|
|
err = -ENOMEM;
|
|
goto err_imx_data;
|
|
}
|
|
|
|
if (of_id)
|
|
pdev->id_entry = of_id->data;
|
|
imx_data->devtype = pdev->id_entry->driver_data;
|
|
pltfm_host->priv = imx_data;
|
|
|
|
imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(imx_data->clk_ipg)) {
|
|
err = PTR_ERR(imx_data->clk_ipg);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
|
if (IS_ERR(imx_data->clk_ahb)) {
|
|
err = PTR_ERR(imx_data->clk_ahb);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
|
|
if (IS_ERR(imx_data->clk_per)) {
|
|
err = PTR_ERR(imx_data->clk_per);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
pltfm_host->clk = imx_data->clk_per;
|
|
|
|
clk_prepare_enable(imx_data->clk_per);
|
|
clk_prepare_enable(imx_data->clk_ipg);
|
|
clk_prepare_enable(imx_data->clk_ahb);
|
|
|
|
imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
|
|
if (IS_ERR(imx_data->pinctrl)) {
|
|
err = PTR_ERR(imx_data->pinctrl);
|
|
goto pin_err;
|
|
}
|
|
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
|
|
|
|
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
|
|
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
|
|
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
|
|
| SDHCI_QUIRK_BROKEN_ADMA;
|
|
|
|
if (is_imx53_esdhc(imx_data))
|
|
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
|
|
|
|
/*
|
|
* The imx6q ROM code will change the default watermark level setting
|
|
* to something insane. Change it back here.
|
|
*/
|
|
if (is_imx6q_usdhc(imx_data))
|
|
writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
|
|
|
|
boarddata = &imx_data->boarddata;
|
|
if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
|
|
if (!host->mmc->parent->platform_data) {
|
|
dev_err(mmc_dev(host->mmc), "no board data!\n");
|
|
err = -EINVAL;
|
|
goto no_board_data;
|
|
}
|
|
imx_data->boarddata = *((struct esdhc_platform_data *)
|
|
host->mmc->parent->platform_data);
|
|
}
|
|
|
|
/* write_protect */
|
|
if (boarddata->wp_type == ESDHC_WP_GPIO) {
|
|
err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"no write-protect pin available!\n");
|
|
boarddata->wp_gpio = -EINVAL;
|
|
}
|
|
} else {
|
|
boarddata->wp_gpio = -EINVAL;
|
|
}
|
|
|
|
/* card_detect */
|
|
if (boarddata->cd_type != ESDHC_CD_GPIO)
|
|
boarddata->cd_gpio = -EINVAL;
|
|
|
|
switch (boarddata->cd_type) {
|
|
case ESDHC_CD_GPIO:
|
|
err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
|
|
if (err) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"no card-detect pin available!\n");
|
|
goto no_card_detect_pin;
|
|
}
|
|
|
|
err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
mmc_hostname(host->mmc), host);
|
|
if (err) {
|
|
dev_err(mmc_dev(host->mmc), "request irq error\n");
|
|
goto no_card_detect_irq;
|
|
}
|
|
/* fall through */
|
|
|
|
case ESDHC_CD_CONTROLLER:
|
|
/* we have a working card_detect back */
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
break;
|
|
|
|
case ESDHC_CD_PERMANENT:
|
|
host->mmc->caps = MMC_CAP_NONREMOVABLE;
|
|
break;
|
|
|
|
case ESDHC_CD_NONE:
|
|
break;
|
|
}
|
|
|
|
err = sdhci_add_host(host);
|
|
if (err)
|
|
goto err_add_host;
|
|
|
|
return 0;
|
|
|
|
err_add_host:
|
|
if (gpio_is_valid(boarddata->cd_gpio))
|
|
free_irq(gpio_to_irq(boarddata->cd_gpio), host);
|
|
no_card_detect_irq:
|
|
if (gpio_is_valid(boarddata->cd_gpio))
|
|
gpio_free(boarddata->cd_gpio);
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
gpio_free(boarddata->wp_gpio);
|
|
no_card_detect_pin:
|
|
no_board_data:
|
|
pin_err:
|
|
clk_disable_unprepare(imx_data->clk_per);
|
|
clk_disable_unprepare(imx_data->clk_ipg);
|
|
clk_disable_unprepare(imx_data->clk_ahb);
|
|
err_clk_get:
|
|
kfree(imx_data);
|
|
err_imx_data:
|
|
sdhci_pltfm_free(pdev);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
|
|
|
|
sdhci_remove_host(host, dead);
|
|
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
gpio_free(boarddata->wp_gpio);
|
|
|
|
if (gpio_is_valid(boarddata->cd_gpio)) {
|
|
free_irq(gpio_to_irq(boarddata->cd_gpio), host);
|
|
gpio_free(boarddata->cd_gpio);
|
|
}
|
|
|
|
clk_disable_unprepare(imx_data->clk_per);
|
|
clk_disable_unprepare(imx_data->clk_ipg);
|
|
clk_disable_unprepare(imx_data->clk_ahb);
|
|
|
|
kfree(imx_data);
|
|
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdhci_esdhc_imx_driver = {
|
|
.driver = {
|
|
.name = "sdhci-esdhc-imx",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = imx_esdhc_dt_ids,
|
|
.pm = SDHCI_PLTFM_PMOPS,
|
|
},
|
|
.id_table = imx_esdhc_devtype,
|
|
.probe = sdhci_esdhc_imx_probe,
|
|
.remove = __devexit_p(sdhci_esdhc_imx_remove),
|
|
};
|
|
|
|
module_platform_driver(sdhci_esdhc_imx_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
|
|
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|