forked from luck/tmp_suning_uos_patched
0f0d85bcc3
Use a sysdev to implement PM methods for the Au1000 interrupt controllers. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1114/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
644 lines
20 KiB
C
644 lines
20 KiB
C
/*
|
|
* Copyright 2001, 2007-2008 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysdev.h>
|
|
|
|
#include <asm/irq_cpu.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#ifdef CONFIG_MIPS_PB1000
|
|
#include <asm/mach-pb1x00/pb1000.h>
|
|
#endif
|
|
|
|
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
|
|
|
|
/* NOTE on interrupt priorities: The original writers of this code said:
|
|
*
|
|
* Because of the tight timing of SETUP token to reply transactions,
|
|
* the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
|
|
* needs the highest priority.
|
|
*/
|
|
|
|
/* per-processor fixed function irqs */
|
|
struct au1xxx_irqmap {
|
|
int im_irq;
|
|
int im_type;
|
|
int im_request; /* set 1 to get higher priority */
|
|
};
|
|
|
|
struct au1xxx_irqmap au1000_irqmap[] __initdata = {
|
|
{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
|
|
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
|
|
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ -1, },
|
|
};
|
|
|
|
struct au1xxx_irqmap au1500_irqmap[] __initdata = {
|
|
{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
|
|
{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
|
|
{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ -1, },
|
|
};
|
|
|
|
struct au1xxx_irqmap au1100_irqmap[] __initdata = {
|
|
{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
|
|
{ AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
|
|
{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ -1, },
|
|
};
|
|
|
|
struct au1xxx_irqmap au1550_irqmap[] __initdata = {
|
|
{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
|
|
{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
|
|
{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
|
|
{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ -1, },
|
|
};
|
|
|
|
struct au1xxx_irqmap au1200_irqmap[] __initdata = {
|
|
{ AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
|
|
{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
|
|
{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
|
|
{ -1, },
|
|
};
|
|
|
|
|
|
static void au1x_ic0_unmask(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
|
|
au_writel(1 << bit, IC0_MASKSET);
|
|
au_writel(1 << bit, IC0_WAKESET);
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic1_unmask(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
|
|
au_writel(1 << bit, IC1_MASKSET);
|
|
au_writel(1 << bit, IC1_WAKESET);
|
|
|
|
/* very hacky. does the pb1000 cpld auto-disable this int?
|
|
* nowhere in the current kernel sources is it disabled. --mlau
|
|
*/
|
|
#if defined(CONFIG_MIPS_PB1000)
|
|
if (irq_nr == AU1000_GPIO15_INT)
|
|
au_writel(0x4000, PB1000_MDR); /* enable int */
|
|
#endif
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic0_mask(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
|
|
au_writel(1 << bit, IC0_MASKCLR);
|
|
au_writel(1 << bit, IC0_WAKECLR);
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic1_mask(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
|
|
au_writel(1 << bit, IC1_MASKCLR);
|
|
au_writel(1 << bit, IC1_WAKECLR);
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic0_ack(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
|
|
|
|
/*
|
|
* This may assume that we don't get interrupts from
|
|
* both edges at once, or if we do, that we don't care.
|
|
*/
|
|
au_writel(1 << bit, IC0_FALLINGCLR);
|
|
au_writel(1 << bit, IC0_RISINGCLR);
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic1_ack(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
|
|
|
|
/*
|
|
* This may assume that we don't get interrupts from
|
|
* both edges at once, or if we do, that we don't care.
|
|
*/
|
|
au_writel(1 << bit, IC1_FALLINGCLR);
|
|
au_writel(1 << bit, IC1_RISINGCLR);
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic0_maskack(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
|
|
|
|
au_writel(1 << bit, IC0_WAKECLR);
|
|
au_writel(1 << bit, IC0_MASKCLR);
|
|
au_writel(1 << bit, IC0_RISINGCLR);
|
|
au_writel(1 << bit, IC0_FALLINGCLR);
|
|
au_sync();
|
|
}
|
|
|
|
static void au1x_ic1_maskack(unsigned int irq_nr)
|
|
{
|
|
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
|
|
|
|
au_writel(1 << bit, IC1_WAKECLR);
|
|
au_writel(1 << bit, IC1_MASKCLR);
|
|
au_writel(1 << bit, IC1_RISINGCLR);
|
|
au_writel(1 << bit, IC1_FALLINGCLR);
|
|
au_sync();
|
|
}
|
|
|
|
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
|
|
{
|
|
int bit = irq - AU1000_INTC1_INT_BASE;
|
|
unsigned long wakemsk, flags;
|
|
|
|
/* only GPIO 0-7 can act as wakeup source. Fortunately these
|
|
* are wired up identically on all supported variants.
|
|
*/
|
|
if ((bit < 0) || (bit > 7))
|
|
return -EINVAL;
|
|
|
|
local_irq_save(flags);
|
|
wakemsk = au_readl(SYS_WAKEMSK);
|
|
if (on)
|
|
wakemsk |= 1 << bit;
|
|
else
|
|
wakemsk &= ~(1 << bit);
|
|
au_writel(wakemsk, SYS_WAKEMSK);
|
|
au_sync();
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* irq_chips for both ICs; this way the mask handlers can be
|
|
* as short as possible.
|
|
*/
|
|
static struct irq_chip au1x_ic0_chip = {
|
|
.name = "Alchemy-IC0",
|
|
.ack = au1x_ic0_ack,
|
|
.mask = au1x_ic0_mask,
|
|
.mask_ack = au1x_ic0_maskack,
|
|
.unmask = au1x_ic0_unmask,
|
|
.set_type = au1x_ic_settype,
|
|
};
|
|
|
|
static struct irq_chip au1x_ic1_chip = {
|
|
.name = "Alchemy-IC1",
|
|
.ack = au1x_ic1_ack,
|
|
.mask = au1x_ic1_mask,
|
|
.mask_ack = au1x_ic1_maskack,
|
|
.unmask = au1x_ic1_unmask,
|
|
.set_type = au1x_ic_settype,
|
|
.set_wake = au1x_ic1_setwake,
|
|
};
|
|
|
|
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
|
|
{
|
|
struct irq_chip *chip;
|
|
unsigned long icr[6];
|
|
unsigned int bit, ic;
|
|
int ret;
|
|
|
|
if (irq >= AU1000_INTC1_INT_BASE) {
|
|
bit = irq - AU1000_INTC1_INT_BASE;
|
|
chip = &au1x_ic1_chip;
|
|
ic = 1;
|
|
} else {
|
|
bit = irq - AU1000_INTC0_INT_BASE;
|
|
chip = &au1x_ic0_chip;
|
|
ic = 0;
|
|
}
|
|
|
|
if (bit > 31)
|
|
return -EINVAL;
|
|
|
|
icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
|
|
icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
|
|
icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
|
|
icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
|
|
icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
|
|
icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
|
|
|
|
ret = 0;
|
|
|
|
switch (flow_type) { /* cfgregs 2:1:0 */
|
|
case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
|
|
au_writel(1 << bit, icr[5]);
|
|
au_writel(1 << bit, icr[4]);
|
|
au_writel(1 << bit, icr[0]);
|
|
set_irq_chip_and_handler_name(irq, chip,
|
|
handle_edge_irq, "riseedge");
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
|
|
au_writel(1 << bit, icr[5]);
|
|
au_writel(1 << bit, icr[1]);
|
|
au_writel(1 << bit, icr[3]);
|
|
set_irq_chip_and_handler_name(irq, chip,
|
|
handle_edge_irq, "falledge");
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
|
|
au_writel(1 << bit, icr[5]);
|
|
au_writel(1 << bit, icr[1]);
|
|
au_writel(1 << bit, icr[0]);
|
|
set_irq_chip_and_handler_name(irq, chip,
|
|
handle_edge_irq, "bothedge");
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
|
|
au_writel(1 << bit, icr[2]);
|
|
au_writel(1 << bit, icr[4]);
|
|
au_writel(1 << bit, icr[0]);
|
|
set_irq_chip_and_handler_name(irq, chip,
|
|
handle_level_irq, "hilevel");
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
|
|
au_writel(1 << bit, icr[2]);
|
|
au_writel(1 << bit, icr[1]);
|
|
au_writel(1 << bit, icr[3]);
|
|
set_irq_chip_and_handler_name(irq, chip,
|
|
handle_level_irq, "lowlevel");
|
|
break;
|
|
case IRQ_TYPE_NONE: /* 0:0:0 */
|
|
au_writel(1 << bit, icr[5]);
|
|
au_writel(1 << bit, icr[4]);
|
|
au_writel(1 << bit, icr[3]);
|
|
/* set at least chip so we can call set_irq_type() on it */
|
|
set_irq_chip(irq, chip);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
au_sync();
|
|
|
|
return ret;
|
|
}
|
|
|
|
asmlinkage void plat_irq_dispatch(void)
|
|
{
|
|
unsigned int pending = read_c0_status() & read_c0_cause();
|
|
unsigned long s, off;
|
|
|
|
if (pending & CAUSEF_IP7) {
|
|
off = MIPS_CPU_IRQ_BASE + 7;
|
|
goto handle;
|
|
} else if (pending & CAUSEF_IP2) {
|
|
s = IC0_REQ0INT;
|
|
off = AU1000_INTC0_INT_BASE;
|
|
} else if (pending & CAUSEF_IP3) {
|
|
s = IC0_REQ1INT;
|
|
off = AU1000_INTC0_INT_BASE;
|
|
} else if (pending & CAUSEF_IP4) {
|
|
s = IC1_REQ0INT;
|
|
off = AU1000_INTC1_INT_BASE;
|
|
} else if (pending & CAUSEF_IP5) {
|
|
s = IC1_REQ1INT;
|
|
off = AU1000_INTC1_INT_BASE;
|
|
} else
|
|
goto spurious;
|
|
|
|
s = au_readl(s);
|
|
if (unlikely(!s)) {
|
|
spurious:
|
|
spurious_interrupt();
|
|
return;
|
|
}
|
|
off += __ffs(s);
|
|
handle:
|
|
do_IRQ(off);
|
|
}
|
|
|
|
static void __init au1000_init_irq(struct au1xxx_irqmap *map)
|
|
{
|
|
unsigned int bit, irq_nr;
|
|
int i;
|
|
|
|
/*
|
|
* Initialize interrupt controllers to a safe state.
|
|
*/
|
|
au_writel(0xffffffff, IC0_CFG0CLR);
|
|
au_writel(0xffffffff, IC0_CFG1CLR);
|
|
au_writel(0xffffffff, IC0_CFG2CLR);
|
|
au_writel(0xffffffff, IC0_MASKCLR);
|
|
au_writel(0xffffffff, IC0_ASSIGNCLR);
|
|
au_writel(0xffffffff, IC0_WAKECLR);
|
|
au_writel(0xffffffff, IC0_SRCSET);
|
|
au_writel(0xffffffff, IC0_FALLINGCLR);
|
|
au_writel(0xffffffff, IC0_RISINGCLR);
|
|
au_writel(0x00000000, IC0_TESTBIT);
|
|
|
|
au_writel(0xffffffff, IC1_CFG0CLR);
|
|
au_writel(0xffffffff, IC1_CFG1CLR);
|
|
au_writel(0xffffffff, IC1_CFG2CLR);
|
|
au_writel(0xffffffff, IC1_MASKCLR);
|
|
au_writel(0xffffffff, IC1_ASSIGNCLR);
|
|
au_writel(0xffffffff, IC1_WAKECLR);
|
|
au_writel(0xffffffff, IC1_SRCSET);
|
|
au_writel(0xffffffff, IC1_FALLINGCLR);
|
|
au_writel(0xffffffff, IC1_RISINGCLR);
|
|
au_writel(0x00000000, IC1_TESTBIT);
|
|
|
|
mips_cpu_irq_init();
|
|
|
|
/* register all 64 possible IC0+IC1 irq sources as type "none".
|
|
* Use set_irq_type() to set edge/level behaviour at runtime.
|
|
*/
|
|
for (i = AU1000_INTC0_INT_BASE;
|
|
(i < AU1000_INTC0_INT_BASE + 32); i++)
|
|
au1x_ic_settype(i, IRQ_TYPE_NONE);
|
|
|
|
for (i = AU1000_INTC1_INT_BASE;
|
|
(i < AU1000_INTC1_INT_BASE + 32); i++)
|
|
au1x_ic_settype(i, IRQ_TYPE_NONE);
|
|
|
|
/*
|
|
* Initialize IC0, which is fixed per processor.
|
|
*/
|
|
while (map->im_irq != -1) {
|
|
irq_nr = map->im_irq;
|
|
|
|
if (irq_nr >= AU1000_INTC1_INT_BASE) {
|
|
bit = irq_nr - AU1000_INTC1_INT_BASE;
|
|
if (map->im_request)
|
|
au_writel(1 << bit, IC1_ASSIGNSET);
|
|
} else {
|
|
bit = irq_nr - AU1000_INTC0_INT_BASE;
|
|
if (map->im_request)
|
|
au_writel(1 << bit, IC0_ASSIGNSET);
|
|
}
|
|
|
|
au1x_ic_settype(irq_nr, map->im_type);
|
|
++map;
|
|
}
|
|
|
|
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
|
|
}
|
|
|
|
void __init arch_init_irq(void)
|
|
{
|
|
switch (alchemy_get_cputype()) {
|
|
case ALCHEMY_CPU_AU1000:
|
|
au1000_init_irq(au1000_irqmap);
|
|
break;
|
|
case ALCHEMY_CPU_AU1500:
|
|
au1000_init_irq(au1500_irqmap);
|
|
break;
|
|
case ALCHEMY_CPU_AU1100:
|
|
au1000_init_irq(au1100_irqmap);
|
|
break;
|
|
case ALCHEMY_CPU_AU1550:
|
|
au1000_init_irq(au1550_irqmap);
|
|
break;
|
|
case ALCHEMY_CPU_AU1200:
|
|
au1000_init_irq(au1200_irqmap);
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct alchemy_ic_sysdev {
|
|
struct sys_device sysdev;
|
|
void __iomem *base;
|
|
unsigned long pmdata[7];
|
|
};
|
|
|
|
static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
|
|
{
|
|
struct alchemy_ic_sysdev *icdev =
|
|
container_of(dev, struct alchemy_ic_sysdev, sysdev);
|
|
|
|
icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
|
|
icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
|
|
icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
|
|
icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
|
|
icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
|
|
icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
|
|
icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int alchemy_ic_resume(struct sys_device *dev)
|
|
{
|
|
struct alchemy_ic_sysdev *icdev =
|
|
container_of(dev, struct alchemy_ic_sysdev, sysdev);
|
|
|
|
__raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
|
|
__raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
|
|
__raw_writel(0x00000000, icdev->base + IC_TESTBIT);
|
|
wmb();
|
|
__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
|
|
__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
|
|
__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
|
|
__raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
|
|
__raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
|
|
__raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
|
|
wmb();
|
|
|
|
__raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
|
|
wmb();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class alchemy_ic_sysdev_class = {
|
|
.name = "ic",
|
|
.suspend = alchemy_ic_suspend,
|
|
.resume = alchemy_ic_resume,
|
|
};
|
|
|
|
static int __init alchemy_ic_sysdev_init(void)
|
|
{
|
|
struct alchemy_ic_sysdev *icdev;
|
|
unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
|
|
int err, i;
|
|
|
|
err = sysdev_class_register(&alchemy_ic_sysdev_class);
|
|
if (err)
|
|
return err;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
|
|
if (!icdev)
|
|
return -ENOMEM;
|
|
|
|
icdev->base = ioremap(icbase[i], 0x1000);
|
|
|
|
icdev->sysdev.id = i;
|
|
icdev->sysdev.cls = &alchemy_ic_sysdev_class;
|
|
err = sysdev_register(&icdev->sysdev);
|
|
if (err) {
|
|
kfree(icdev);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
device_initcall(alchemy_ic_sysdev_init);
|