kernel_optimize_test/security/selinux/include/avc.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

192 lines
4.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Access vector cache interface for object managers.
*
* Author : Stephen Smalley, <sds@tycho.nsa.gov>
*/
#ifndef _SELINUX_AVC_H_
#define _SELINUX_AVC_H_
#include <linux/stddef.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/audit.h>
#include <linux/lsm_audit.h>
#include <linux/in6.h>
#include "flask.h"
#include "av_permissions.h"
#include "security.h"
#ifdef CONFIG_SECURITY_SELINUX_DEVELOP
extern int selinux_enforcing;
#else
#define selinux_enforcing 1
#endif
/*
* An entry in the AVC.
*/
struct avc_entry;
struct task_struct;
struct inode;
struct sock;
struct sk_buff;
/*
* AVC statistics
*/
struct avc_cache_stats {
unsigned int lookups;
unsigned int misses;
unsigned int allocations;
unsigned int reclaims;
unsigned int frees;
};
/*
* We only need this data after we have decided to send an audit message.
*/
struct selinux_audit_data {
u32 ssid;
u32 tsid;
u16 tclass;
u32 requested;
u32 audited;
u32 denied;
int result;
};
/*
* AVC operations
*/
void __init avc_init(void);
static inline u32 avc_audit_required(u32 requested,
struct av_decision *avd,
int result,
u32 auditdeny,
u32 *deniedp)
{
u32 denied, audited;
denied = requested & ~avd->allowed;
if (unlikely(denied)) {
audited = denied & avd->auditdeny;
/*
* auditdeny is TRICKY! Setting a bit in
* this field means that ANY denials should NOT be audited if
* the policy contains an explicit dontaudit rule for that
* permission. Take notice that this is unrelated to the
* actual permissions that were denied. As an example lets
* assume:
*
* denied == READ
* avd.auditdeny & ACCESS == 0 (not set means explicit rule)
* auditdeny & ACCESS == 1
*
* We will NOT audit the denial even though the denied
* permission was READ and the auditdeny checks were for
* ACCESS
*/
if (auditdeny && !(auditdeny & avd->auditdeny))
audited = 0;
} else if (result)
audited = denied = requested;
else
audited = requested & avd->auditallow;
*deniedp = denied;
return audited;
}
int slow_avc_audit(u32 ssid, u32 tsid, u16 tclass,
u32 requested, u32 audited, u32 denied, int result,
struct common_audit_data *a,
unsigned flags);
/**
* avc_audit - Audit the granting or denial of permissions.
* @ssid: source security identifier
* @tsid: target security identifier
* @tclass: target security class
* @requested: requested permissions
* @avd: access vector decisions
* @result: result from avc_has_perm_noaudit
* @a: auxiliary audit data
* @flags: VFS walk flags
*
* Audit the granting or denial of permissions in accordance
* with the policy. This function is typically called by
* avc_has_perm() after a permission check, but can also be
* called directly by callers who use avc_has_perm_noaudit()
* in order to separate the permission check from the auditing.
* For example, this separation is useful when the permission check must
* be performed under a lock, to allow the lock to be released
* before calling the auditing code.
*/
static inline int avc_audit(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
struct av_decision *avd,
int result,
struct common_audit_data *a,
int flags)
{
u32 audited, denied;
audited = avc_audit_required(requested, avd, result, 0, &denied);
if (likely(!audited))
return 0;
return slow_avc_audit(ssid, tsid, tclass,
requested, audited, denied, result,
a, flags);
}
#define AVC_STRICT 1 /* Ignore permissive mode. */
#define AVC_EXTENDED_PERMS 2 /* update extended permissions */
int avc_has_perm_noaudit(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
unsigned flags,
struct av_decision *avd);
int avc_has_perm(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
struct common_audit_data *auditdata);
int avc_has_perm_flags(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
struct common_audit_data *auditdata,
int flags);
int avc_has_extended_perms(u32 ssid, u32 tsid, u16 tclass, u32 requested,
u8 driver, u8 perm, struct common_audit_data *ad);
u32 avc_policy_seqno(void);
#define AVC_CALLBACK_GRANT 1
#define AVC_CALLBACK_TRY_REVOKE 2
#define AVC_CALLBACK_REVOKE 4
#define AVC_CALLBACK_RESET 8
#define AVC_CALLBACK_AUDITALLOW_ENABLE 16
#define AVC_CALLBACK_AUDITALLOW_DISABLE 32
#define AVC_CALLBACK_AUDITDENY_ENABLE 64
#define AVC_CALLBACK_AUDITDENY_DISABLE 128
#define AVC_CALLBACK_ADD_XPERMS 256
int avc_add_callback(int (*callback)(u32 event), u32 events);
/* Exported to selinuxfs */
int avc_get_hash_stats(char *page);
extern unsigned int avc_cache_threshold;
/* Attempt to free avc node cache */
void avc_disable(void);
#ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
DECLARE_PER_CPU(struct avc_cache_stats, avc_cache_stats);
#endif
#endif /* _SELINUX_AVC_H_ */