forked from luck/tmp_suning_uos_patched
265 lines
6.4 KiB
C
265 lines
6.4 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/devices.c
|
|
*
|
|
* OMAP1 platform device setup/initialization
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/tc.h>
|
|
#include <mach/board.h>
|
|
#include <mach/mux.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/mmc.h>
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
|
|
|
|
#define OMAP_RTC_BASE 0xfffb4800
|
|
|
|
static struct resource rtc_resources[] = {
|
|
{
|
|
.start = OMAP_RTC_BASE,
|
|
.end = OMAP_RTC_BASE + 0x5f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = INT_RTC_TIMER,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = INT_RTC_ALARM,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device omap_rtc_device = {
|
|
.name = "omap_rtc",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(rtc_resources),
|
|
.resource = rtc_resources,
|
|
};
|
|
|
|
static void omap_init_rtc(void)
|
|
{
|
|
(void) platform_device_register(&omap_rtc_device);
|
|
}
|
|
#else
|
|
static inline void omap_init_rtc(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
|
|
|
|
#if defined(CONFIG_ARCH_OMAP15XX)
|
|
# define OMAP1_MBOX_SIZE 0x23
|
|
# define INT_DSP_MAILBOX1 INT_1510_DSP_MAILBOX1
|
|
#elif defined(CONFIG_ARCH_OMAP16XX)
|
|
# define OMAP1_MBOX_SIZE 0x2f
|
|
# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1
|
|
#endif
|
|
|
|
#define OMAP1_MBOX_BASE IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
|
|
|
|
static struct resource mbox_resources[] = {
|
|
{
|
|
.start = OMAP1_MBOX_BASE,
|
|
.end = OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = INT_DSP_MAILBOX1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device mbox_device = {
|
|
.name = "omap1-mailbox",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(mbox_resources),
|
|
.resource = mbox_resources,
|
|
};
|
|
|
|
static inline void omap_init_mbox(void)
|
|
{
|
|
platform_device_register(&mbox_device);
|
|
}
|
|
#else
|
|
static inline void omap_init_mbox(void) { }
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
|
|
|
|
static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
|
|
int controller_nr)
|
|
{
|
|
if (controller_nr == 0) {
|
|
omap_cfg_reg(MMC_CMD);
|
|
omap_cfg_reg(MMC_CLK);
|
|
omap_cfg_reg(MMC_DAT0);
|
|
if (cpu_is_omap1710()) {
|
|
omap_cfg_reg(M15_1710_MMC_CLKI);
|
|
omap_cfg_reg(P19_1710_MMC_CMDDIR);
|
|
omap_cfg_reg(P20_1710_MMC_DATDIR0);
|
|
}
|
|
if (mmc_controller->slots[0].wires == 4) {
|
|
omap_cfg_reg(MMC_DAT1);
|
|
/* NOTE: DAT2 can be on W10 (here) or M15 */
|
|
if (!mmc_controller->slots[0].nomux)
|
|
omap_cfg_reg(MMC_DAT2);
|
|
omap_cfg_reg(MMC_DAT3);
|
|
}
|
|
}
|
|
|
|
/* Block 2 is on newer chips, and has many pinout options */
|
|
if (cpu_is_omap16xx() && controller_nr == 1) {
|
|
if (!mmc_controller->slots[1].nomux) {
|
|
omap_cfg_reg(Y8_1610_MMC2_CMD);
|
|
omap_cfg_reg(Y10_1610_MMC2_CLK);
|
|
omap_cfg_reg(R18_1610_MMC2_CLKIN);
|
|
omap_cfg_reg(W8_1610_MMC2_DAT0);
|
|
if (mmc_controller->slots[1].wires == 4) {
|
|
omap_cfg_reg(V8_1610_MMC2_DAT1);
|
|
omap_cfg_reg(W15_1610_MMC2_DAT2);
|
|
omap_cfg_reg(R10_1610_MMC2_DAT3);
|
|
}
|
|
|
|
/* These are needed for the level shifter */
|
|
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
|
|
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
|
|
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
|
|
}
|
|
|
|
/* Feedback clock must be set on OMAP-1710 MMC2 */
|
|
if (cpu_is_omap1710())
|
|
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
|
|
MOD_CONF_CTRL_1);
|
|
}
|
|
}
|
|
|
|
void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
|
|
int nr_controllers)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nr_controllers; i++) {
|
|
unsigned long base, size;
|
|
unsigned int irq = 0;
|
|
|
|
if (!mmc_data[i])
|
|
continue;
|
|
|
|
omap1_mmc_mux(mmc_data[i], i);
|
|
|
|
switch (i) {
|
|
case 0:
|
|
base = OMAP1_MMC1_BASE;
|
|
irq = INT_MMC;
|
|
break;
|
|
case 1:
|
|
if (!cpu_is_omap16xx())
|
|
return;
|
|
base = OMAP1_MMC2_BASE;
|
|
irq = INT_1610_MMC2;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
size = OMAP1_MMC_SIZE;
|
|
|
|
omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
|
|
};
|
|
}
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_OMAP_STI)
|
|
|
|
#define OMAP1_STI_BASE 0xfffea000
|
|
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
|
|
|
|
static struct resource sti_resources[] = {
|
|
{
|
|
.start = OMAP1_STI_BASE,
|
|
.end = OMAP1_STI_BASE + SZ_1K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = OMAP1_STI_CHANNEL_BASE,
|
|
.end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = INT_1610_STI,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device sti_device = {
|
|
.name = "sti",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(sti_resources),
|
|
.resource = sti_resources,
|
|
};
|
|
|
|
static inline void omap_init_sti(void)
|
|
{
|
|
platform_device_register(&sti_device);
|
|
}
|
|
#else
|
|
static inline void omap_init_sti(void) {}
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* This gets called after board-specific INIT_MACHINE, and initializes most
|
|
* on-chip peripherals accessible on this board (except for few like USB):
|
|
*
|
|
* (a) Does any "standard config" pin muxing needed. Board-specific
|
|
* code will have muxed GPIO pins and done "nonstandard" setup;
|
|
* that code could live in the boot loader.
|
|
* (b) Populating board-specific platform_data with the data drivers
|
|
* rely on to handle wiring variations.
|
|
* (c) Creating platform devices as meaningful on this board and
|
|
* with this kernel configuration.
|
|
*
|
|
* Claiming GPIOs, and setting their direction and initial values, is the
|
|
* responsibility of the device drivers. So is responding to probe().
|
|
*
|
|
* Board-specific knowlege like creating devices or pin setup is to be
|
|
* kept out of drivers as much as possible. In particular, pin setup
|
|
* may be handled by the boot loader, and drivers should expect it will
|
|
* normally have been done by the time they're probed.
|
|
*/
|
|
static int __init omap1_init_devices(void)
|
|
{
|
|
/* please keep these calls, and their implementations above,
|
|
* in alphabetical order so they're easier to sort through.
|
|
*/
|
|
|
|
omap_init_mbox();
|
|
omap_init_rtc();
|
|
omap_init_sti();
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(omap1_init_devices);
|
|
|