forked from luck/tmp_suning_uos_patched
a09e64fbc0
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
277 lines
6.6 KiB
C
277 lines
6.6 KiB
C
/* linux/arch/arm/mach-s3c2410/clock.c
|
|
*
|
|
* Copyright (c) 2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C2410,S3C2440,S3C2442 Clock control support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/plat-s3c/regs-serial.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-gpio.h>
|
|
|
|
#include <asm/plat-s3c24xx/s3c2410.h>
|
|
#include <asm/plat-s3c24xx/clock.h>
|
|
#include <asm/plat-s3c24xx/cpu.h>
|
|
|
|
int s3c2410_clkcon_enable(struct clk *clk, int enable)
|
|
{
|
|
unsigned int clocks = clk->ctrlbit;
|
|
unsigned long clkcon;
|
|
|
|
clkcon = __raw_readl(S3C2410_CLKCON);
|
|
|
|
if (enable)
|
|
clkcon |= clocks;
|
|
else
|
|
clkcon &= ~clocks;
|
|
|
|
/* ensure none of the special function bits set */
|
|
clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
|
|
|
|
__raw_writel(clkcon, S3C2410_CLKCON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c2410_upll_enable(struct clk *clk, int enable)
|
|
{
|
|
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
|
|
unsigned long orig = clkslow;
|
|
|
|
if (enable)
|
|
clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
|
|
else
|
|
clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
|
|
|
|
__raw_writel(clkslow, S3C2410_CLKSLOW);
|
|
|
|
/* if we started the UPLL, then allow to settle */
|
|
|
|
if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
|
|
udelay(200);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* standard clock definitions */
|
|
|
|
static struct clk init_clocks_disable[] = {
|
|
{
|
|
.name = "nand",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_NAND,
|
|
}, {
|
|
.name = "sdi",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_SDI,
|
|
}, {
|
|
.name = "adc",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_ADC,
|
|
}, {
|
|
.name = "i2c",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_IIC,
|
|
}, {
|
|
.name = "iis",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_IIS,
|
|
}, {
|
|
.name = "spi",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_SPI,
|
|
}
|
|
};
|
|
|
|
static struct clk init_clocks[] = {
|
|
{
|
|
.name = "lcd",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_LCDC,
|
|
}, {
|
|
.name = "gpio",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_GPIO,
|
|
}, {
|
|
.name = "usb-host",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_USBH,
|
|
}, {
|
|
.name = "usb-device",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_USBD,
|
|
}, {
|
|
.name = "timers",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_PWMT,
|
|
}, {
|
|
.name = "uart",
|
|
.id = 0,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_UART0,
|
|
}, {
|
|
.name = "uart",
|
|
.id = 1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_UART1,
|
|
}, {
|
|
.name = "uart",
|
|
.id = 2,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_UART2,
|
|
}, {
|
|
.name = "rtc",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2410_clkcon_enable,
|
|
.ctrlbit = S3C2410_CLKCON_RTC,
|
|
}, {
|
|
.name = "watchdog",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.ctrlbit = 0,
|
|
}, {
|
|
.name = "usb-bus-host",
|
|
.id = -1,
|
|
.parent = &clk_usb_bus,
|
|
}, {
|
|
.name = "usb-bus-gadget",
|
|
.id = -1,
|
|
.parent = &clk_usb_bus,
|
|
},
|
|
};
|
|
|
|
/* s3c2410_baseclk_add()
|
|
*
|
|
* Add all the clocks used by the s3c2410 or compatible CPUs
|
|
* such as the S3C2440 and S3C2442.
|
|
*
|
|
* We cannot use a system device as we are needed before any
|
|
* of the init-calls that initialise the devices are actually
|
|
* done.
|
|
*/
|
|
|
|
int __init s3c2410_baseclk_add(void)
|
|
{
|
|
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
|
|
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
|
|
struct clk *clkp;
|
|
struct clk *xtal;
|
|
int ret;
|
|
int ptr;
|
|
|
|
clk_upll.enable = s3c2410_upll_enable;
|
|
|
|
if (s3c24xx_register_clock(&clk_usb_bus) < 0)
|
|
printk(KERN_ERR "failed to register usb bus clock\n");
|
|
|
|
/* register clocks from clock array */
|
|
|
|
clkp = init_clocks;
|
|
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
|
|
/* ensure that we note the clock state */
|
|
|
|
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
|
|
|
|
ret = s3c24xx_register_clock(clkp);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to register clock %s (%d)\n",
|
|
clkp->name, ret);
|
|
}
|
|
}
|
|
|
|
/* We must be careful disabling the clocks we are not intending to
|
|
* be using at boot time, as subsystems such as the LCD which do
|
|
* their own DMA requests to the bus can cause the system to lockup
|
|
* if they where in the middle of requesting bus access.
|
|
*
|
|
* Disabling the LCD clock if the LCD is active is very dangerous,
|
|
* and therefore the bootloader should be careful to not enable
|
|
* the LCD clock if it is not needed.
|
|
*/
|
|
|
|
/* install (and disable) the clocks we do not need immediately */
|
|
|
|
clkp = init_clocks_disable;
|
|
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
|
|
|
|
ret = s3c24xx_register_clock(clkp);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to register clock %s (%d)\n",
|
|
clkp->name, ret);
|
|
}
|
|
|
|
s3c2410_clkcon_enable(clkp, 0);
|
|
}
|
|
|
|
/* show the clock-slow value */
|
|
|
|
xtal = clk_get(NULL, "xtal");
|
|
|
|
printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
|
|
print_mhz(clk_get_rate(xtal) /
|
|
( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
|
|
(clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
|
|
(clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
|
|
(clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
|
|
|
|
return 0;
|
|
}
|