kernel_optimize_test/drivers/mtd/chips
Boris Brezillon da86748bf6 NAND core changes:
- Add the SPI-NAND framework.
 - Create a helper to find the best ECC configuration.
 - Create NAND controller operations.
 - Allocate dynamically ONFI parameters structure.
 - Add defines for ONFI version bits.
 - Add manufacturer fixup for ONFI parameter page.
 - Add an option to specify NAND chip as a boot device.
 - Add Reed-Solomon error correction algorithm.
 - Better name for the controller structure.
 - Remove unused caller_is_module() definition.
 - Make subop helpers return unsigned values.
 - Expose _notsupp() helpers for raw page accessors.
 - Add default values for dynamic timings.
 - Kill the chip->scan_bbt() hook.
 - Rename nand_default_bbt() into nand_create_bbt().
 - Start to clean the nand_chip structure.
 - Remove stale prototype from rawnand.h.
 
 Raw NAND controllers drivers changes:
 - Qcom: structuring cleanup.
 - Denali: use core helper to find the best ECC configuration.
 - Possible build of almost all drivers by adding a dependency on
   COMPILE_TEST for almost all of them in Kconfig, implies various
   fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
   changes in sparc64 and ia64 architectures.
 - Clean the ->probe() functions error path of a lot of drivers.
 - Migrate all drivers to use nand_scan() instead of
   nand_scan_ident()/nand_scan_tail() pair.
 - Use mtd_device_register() where applicable to simplify the code.
 - Marvell:
   * Handle on-die ECC.
   * Better clocks handling.
   * Remove bogus comment.
   * Add suspend and resume support.
 - Tegra: add NAND controller driver.
 - Atmel:
   * Add module param to avoid using dma.
   * Drop Wenyou Yang from MAINTAINERS.
 - Denali: optimize timings handling.
 - FSMC: Stop using chip->read_buf().
 - FSL:
   * Switch to SPDX license tag identifiers.
   * Fix qualifiers in MXC init functions.
 
 Raw NAND chip drivers changes:
 - Micron:
   * Add fixup for ONFI revision.
   * Update ecc_stats.corrected.
   * Make ECC activation stateful.
   * Avoid enabling/disabling ECC when it can't be disabled.
   * Get the actual number of bitflips.
   * Allow forced on-die ECC.
   * Support 8/512 on-die ECC.
   * Fix on-die ECC detection logic.
 - Hynix:
   * Fix decoding the OOB size on H27UCG8T2BTR.
   * Use ->exec_op() in hynix_nand_reg_write_op().
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJbYYGVAAoJECVq6hhHvVaE0poIAJy+VpZl0jTPQ/oO8TQui9hE
 IZbc8LwohCvegYYhiY1cNESyMYamDfoK6M93i/0zTJF2AJAxPl25ldT8N5Wr16DO
 5Vfsdjv75V8l0JEY2SvWYmC6glOAYs0UEDdcFNJRMPqUnQz+VvBIafJOCQqzo4ZH
 SDnLx3XzOxO4PAPnztWEg50WvaqMPt7ThcqoxThHMcQaLrNjgJUsV0mN+vNEv16Q
 6gH6hl1C019k+Kj2Zu0vAifHw1K7gIYT4HvqKwstQ6HYUX2IzIzuEpRIcIze0S5z
 XKzZ57USItb3l+Y3YwFBLjgP4N+VTT5X59LxdtCOXJ+YvzgxwtKElRvalNcryYI=
 =zkEf
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

Pull NAND updates from Miquel Raynal:

"
 NAND core changes:
 - Add the SPI-NAND framework.
 - Create a helper to find the best ECC configuration.
 - Create NAND controller operations.
 - Allocate dynamically ONFI parameters structure.
 - Add defines for ONFI version bits.
 - Add manufacturer fixup for ONFI parameter page.
 - Add an option to specify NAND chip as a boot device.
 - Add Reed-Solomon error correction algorithm.
 - Better name for the controller structure.
 - Remove unused caller_is_module() definition.
 - Make subop helpers return unsigned values.
 - Expose _notsupp() helpers for raw page accessors.
 - Add default values for dynamic timings.
 - Kill the chip->scan_bbt() hook.
 - Rename nand_default_bbt() into nand_create_bbt().
 - Start to clean the nand_chip structure.
 - Remove stale prototype from rawnand.h.

 Raw NAND controllers drivers changes:
 - Qcom: structuring cleanup.
 - Denali: use core helper to find the best ECC configuration.
 - Possible build of almost all drivers by adding a dependency on
   COMPILE_TEST for almost all of them in Kconfig, implies various
   fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
   changes in sparc64 and ia64 architectures.
 - Clean the ->probe() functions error path of a lot of drivers.
 - Migrate all drivers to use nand_scan() instead of
   nand_scan_ident()/nand_scan_tail() pair.
 - Use mtd_device_register() where applicable to simplify the code.
 - Marvell:
   * Handle on-die ECC.
   * Better clocks handling.
   * Remove bogus comment.
   * Add suspend and resume support.
 - Tegra: add NAND controller driver.
 - Atmel:
   * Add module param to avoid using dma.
   * Drop Wenyou Yang from MAINTAINERS.
 - Denali: optimize timings handling.
 - FSMC: Stop using chip->read_buf().
 - FSL:
   * Switch to SPDX license tag identifiers.
   * Fix qualifiers in MXC init functions.

 Raw NAND chip drivers changes:
 - Micron:
   * Add fixup for ONFI revision.
   * Update ecc_stats.corrected.
   * Make ECC activation stateful.
   * Avoid enabling/disabling ECC when it can't be disabled.
   * Get the actual number of bitflips.
   * Allow forced on-die ECC.
   * Support 8/512 on-die ECC.
   * Fix on-die ECC detection logic.
 - Hynix:
   * Fix decoding the OOB size on H27UCG8T2BTR.
   * Use ->exec_op() in hynix_nand_reg_write_op().
"
2018-08-11 12:15:19 +02:00
..
cfi_cmdset_0001.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
cfi_cmdset_0002.c NAND core changes: 2018-08-11 12:15:19 +02:00
cfi_cmdset_0020.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
cfi_probe.c mtd: cfi: Add early fixup for S70GL02GS 2018-05-04 09:52:38 +02:00
cfi_util.c
chipreg.c
fwh_lock.h
gen_probe.c mtd: Use kasprintf() instead of fixed buffer formatting 2018-07-07 10:53:45 +02:00
jedec_probe.c MTD changes: 2018-04-06 12:15:41 -07:00
Kconfig mtd: Make Kconfig formatting consistent 2018-07-19 23:12:06 +02:00
Makefile
map_absent.c
map_ram.c mtd: Stop updating erase_info->state and calling mtd_erase_callback() 2018-03-21 09:50:56 +01:00
map_rom.c mtd: remove the get_unmapped_area method 2017-11-13 21:39:18 +01:00