forked from luck/tmp_suning_uos_patched
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
196 lines
6.6 KiB
C
196 lines
6.6 KiB
C
/*+M*************************************************************************
|
|
* Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux.
|
|
*
|
|
* Copyright (c) 1997 Perceptive Solutions, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* File Name: psi_chip.h
|
|
*
|
|
* Description: This file contains the interface defines and
|
|
* error codes.
|
|
*
|
|
*-M*************************************************************************/
|
|
#ifndef PSI_CHIP
|
|
#define PSI_CHIP
|
|
|
|
/************************************************/
|
|
/* Misc konstants */
|
|
/************************************************/
|
|
#define CHIP_MAXDRIVES 8
|
|
|
|
/************************************************/
|
|
/* Chip I/O addresses */
|
|
/************************************************/
|
|
#define CHIP_ADRS_0 0x0130
|
|
#define CHIP_ADRS_1 0x0150
|
|
#define CHIP_ADRS_2 0x0190
|
|
#define CHIP_ADRS_3 0x0210
|
|
#define CHIP_ADRS_4 0x0230
|
|
#define CHIP_ADRS_5 0x0250
|
|
|
|
/************************************************/
|
|
/* EEPROM locations */
|
|
/************************************************/
|
|
#define CHIP_EEPROM_BIOS 0x0000 // BIOS base address
|
|
#define CHIP_EEPROM_DATA 0x2000 // SETUP data base address
|
|
#define CHIP_EEPROM_FACTORY 0x2400 // FACTORY data base address
|
|
#define CHIP_EEPROM_SETUP 0x3000 // SETUP PROGRAM base address
|
|
|
|
#define CHIP_EEPROM_SIZE 32768U // size of the entire EEPROM
|
|
#define CHIP_EEPROM_BIOS_SIZE 8192 // size of the BIOS in bytes
|
|
#define CHIP_EEPROM_DATA_SIZE 4096 // size of factory, setup, log data block in bytes
|
|
#define CHIP_EEPROM_SETUP_SIZE 20480U // size of the setup program in bytes
|
|
|
|
/************************************************/
|
|
/* Chip Interrupts */
|
|
/************************************************/
|
|
#define CHIP_IRQ_10 0x72
|
|
#define CHIP_IRQ_11 0x73
|
|
#define CHIP_IRQ_12 0x74
|
|
|
|
/************************************************/
|
|
/* Chip Setup addresses */
|
|
/************************************************/
|
|
#define CHIP_SETUP_BASE 0x0000C000L
|
|
|
|
/************************************************/
|
|
/* Chip Register address offsets */
|
|
/************************************************/
|
|
#define REG_DATA 0x00
|
|
#define REG_ERROR 0x01
|
|
#define REG_SECTOR_COUNT 0x02
|
|
#define REG_LBA_0 0x03
|
|
#define REG_LBA_8 0x04
|
|
#define REG_LBA_16 0x05
|
|
#define REG_LBA_24 0x06
|
|
#define REG_STAT_CMD 0x07
|
|
#define REG_SEL_FAIL 0x08
|
|
#define REG_IRQ_STATUS 0x09
|
|
#define REG_ADDRESS 0x0A
|
|
#define REG_FAIL 0x0C
|
|
#define REG_ALT_STAT 0x0E
|
|
#define REG_DRIVE_ADRS 0x0F
|
|
|
|
/************************************************/
|
|
/* Chip RAM locations */
|
|
/************************************************/
|
|
#define CHIP_DEVICE 0x8000
|
|
#define CHIP_DEVICE_0 0x8000
|
|
#define CHIP_DEVICE_1 0x8008
|
|
#define CHIP_DEVICE_2 0x8010
|
|
#define CHIP_DEVICE_3 0x8018
|
|
#define CHIP_DEVICE_4 0x8020
|
|
#define CHIP_DEVICE_5 0x8028
|
|
#define CHIP_DEVICE_6 0x8030
|
|
#define CHIP_DEVICE_7 0x8038
|
|
typedef struct
|
|
{
|
|
UCHAR channel; // channel of this device (0-8).
|
|
UCHAR spt; // Sectors Per Track.
|
|
ULONG spc; // Sectors Per Cylinder.
|
|
} CHIP_DEVICE_N;
|
|
|
|
#define CHIP_CONFIG 0x8100 // address of boards configuration.
|
|
typedef struct
|
|
{
|
|
UCHAR irq; // interrupt request channel number
|
|
UCHAR numDrives; // Number of accessible drives
|
|
UCHAR fastFormat; // Boolean for fast format enable
|
|
} CHIP_CONFIG_N;
|
|
|
|
#define CHIP_MAP 0x8108 // eight byte device type map.
|
|
|
|
|
|
#define CHIP_RAID 0x8120 // array of RAID signature structures and LBA
|
|
#define CHIP_RAID_1 0x8120
|
|
#define CHIP_RAID_2 0x8130
|
|
#define CHIP_RAID_3 0x8140
|
|
#define CHIP_RAID_4 0x8150
|
|
|
|
/************************************************/
|
|
/* Chip Register Masks */
|
|
/************************************************/
|
|
#define CHIP_ID 0x7B
|
|
#define SEL_RAM 0x8000
|
|
#define MASK_FAIL 0x80
|
|
|
|
/************************************************/
|
|
/* Chip cable select bits */
|
|
/************************************************/
|
|
#define SECTORSXFER 8
|
|
|
|
/************************************************/
|
|
/* Chip cable select bits */
|
|
/************************************************/
|
|
#define SEL_NONE 0x00
|
|
#define SEL_1 0x01
|
|
#define SEL_2 0x02
|
|
#define SEL_3 0x04
|
|
#define SEL_4 0x08
|
|
|
|
/************************************************/
|
|
/* Programmable Interrupt Controller*/
|
|
/************************************************/
|
|
#define PIC1 0x20 // first 8259 base port address
|
|
#define PIC2 0xA0 // second 8259 base port address
|
|
#define INT_OCW1 1 // Operation Control Word 1: IRQ mask
|
|
#define EOI 0x20 // non-specific end-of-interrupt
|
|
|
|
/************************************************/
|
|
/* Device/Geometry controls */
|
|
/************************************************/
|
|
#define GEOMETRY_NONE 0x0 // No device
|
|
#define GEOMETRY_AUTO 0x1 // Geometry set automatically
|
|
#define GEOMETRY_USER 0x2 // User supplied geometry
|
|
|
|
#define DEVICE_NONE 0x0 // No device present
|
|
#define DEVICE_INACTIVE 0x1 // device present but not registered active
|
|
#define DEVICE_ATAPI 0x2 // ATAPI device (CD_ROM, Tape, Etc...)
|
|
#define DEVICE_DASD_NONLBA 0x3 // Non LBA incompatible device
|
|
#define DEVICE_DASD_LBA 0x4 // LBA compatible device
|
|
|
|
/************************************************/
|
|
/* Setup Structure Definitions */
|
|
/************************************************/
|
|
typedef struct // device setup parameters
|
|
{
|
|
UCHAR geometryControl; // geometry control flags
|
|
UCHAR device; // device code
|
|
USHORT sectors; // number of sectors per track
|
|
USHORT heads; // number of heads
|
|
USHORT cylinders; // number of cylinders for this device
|
|
ULONG blocks; // number of blocks on device
|
|
USHORT spare1;
|
|
USHORT spare2;
|
|
} SETUP_DEVICE, *PSETUP_DEVICE;
|
|
|
|
typedef struct // master setup structure
|
|
{
|
|
USHORT startupDelay;
|
|
USHORT promptBIOS;
|
|
USHORT fastFormat;
|
|
USHORT spare2;
|
|
USHORT spare3;
|
|
USHORT spare4;
|
|
USHORT spare5;
|
|
USHORT spare6;
|
|
SETUP_DEVICE setupDevice[8];
|
|
} SETUP, *PSETUP;
|
|
|
|
#endif
|
|
|