kernel_optimize_test/drivers/usb/serial
Bill Pemberton 27b351c554 USB: quatech2: only write to the tty if the port is open.
The commit 2e124b4a39 removed the checks
that prevented qt2_process_read_urb() from trying to put chars into
ttys that weren't actually opened.  This resulted in 'tty is NULL'
warnings from flush_to_ldisc() when the device was used.

The devices use just one read urb for all ports.  As a result
qt2_process_read_urb() may be called with the current port set to a
port number that has not been opened.  Add a check if the port is open
before calling tty_flip_buffer_push().

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-13 12:32:47 -07:00
..
aircable.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ark3116.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
belkin_sa.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
belkin_sa.h
bus.c usb-core: remove CONFIG_HOTPLUG ifdefs 2012-11-21 13:27:16 -08:00
ch341.c USB: ch341: fix port-data memory leak 2012-10-25 09:36:57 -07:00
console.c USB merge for 3.7-rc1 2012-10-01 13:23:01 -07:00
cp210x.c usb: serial: Add Rigblaster Advantage to device table 2013-03-12 08:54:41 -07:00
cyberjack.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
cypress_m8.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
cypress_m8.h
digi_acceleport.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
empeg.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ezusb_convert.pl
f81232.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ftdi_sio_ids.h USB: ftdi_sio: add Zolix FTDI PID 2013-02-02 13:31:52 +01:00
ftdi_sio.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
ftdi_sio.h
funsoft.c USB: serial: funsoft.c: remove debug module parameter 2012-09-14 12:31:27 -07:00
garmin_gps.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
generic.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
hp4x.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
io_16654.h
io_edgeport.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
io_edgeport.h
io_ionsp.h
io_tables.h USB: io_edgeport: fix port-data memory leak 2012-10-17 13:47:58 -07:00
io_ti.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
io_ti.h
io_usbvend.h
ipaq.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ipw.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ir-usb.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
iuu_phoenix.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
iuu_phoenix.h
Kconfig tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
keyspan_pda.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
keyspan.h USB: keyspan: fix NULL-pointer dereferences and memory leaks 2012-10-25 09:37:13 -07:00
kl5kusb105.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
kl5kusb105.h
kobil_sct.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
kobil_sct.h
Makefile usb: add driver for xsens motion trackers 2013-01-25 09:56:54 -08:00
Makefile-keyspan_pda_fw
mct_u232.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
mct_u232.h
metro-usb.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mos7720.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mos7840.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
moto_modem.c
navman.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
omninet.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
opticon.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
option.c USB: added support for Cinterion's products AH6 and PLS8 2013-03-07 12:29:09 +08:00
oti6858.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
oti6858.h
pl2303.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pl2303.h
qcaux.c qcaux: add Franklin U600 2013-03-11 11:09:17 -07:00
qcserial.c qcserial: bind to DM/DIAG port on Gobi 1K devices 2013-03-13 08:50:42 -07:00
quatech2.c USB: quatech2: only write to the tty if the port is open. 2013-03-13 12:32:47 -07:00
safe_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
siemens_mpi.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
sierra.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
spcp8x5.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ssu100.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
symbolserial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ti_usb_3410_5052.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ti_usb_3410_5052.h
usb_debug.c
usb_wwan.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
usb-serial.c USB: serial: fix null-pointer dereferences on disconnect 2013-02-13 09:20:06 -08:00
usb-wwan.h USB: usb-wwan: fix multiple memory leaks in error paths 2012-10-25 09:37:13 -07:00
visor.c USB: Serial: visor.c: remove debug module parameter 2012-09-18 10:16:28 +01:00
visor.h
vivopay-serial.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
whiteheat.c USB: whiteheat: fix port-data memory leak 2012-10-25 09:36:57 -07:00
whiteheat.h
xsens_mt.c usb: add driver for xsens motion trackers 2013-01-25 09:56:54 -08:00
zio.c
zte_ev.c USB: serial: add zte_ev.c driver 2012-09-13 10:15:14 -07:00