forked from luck/tmp_suning_uos_patched
ca9eb48fe0
The biggest chunk of the regulator changes for this release outside of
the new drivers is the conversion of the fixed regulator to use the GPIO
descriptor API, there's a small addition to the GPIO API plus a bunch of
updates to board files to implement it. This is some really welcome
work from Linus Walleij that's had a bunch of review and has been
sitting in -next for a while so I'm fairly happy there's no major
issues.
- Helpers for overlapping linear ranges.
- Display opmode and consumer requested load in the regualtor_summary
file in debugfs, plus a fix there.
- Support for the fun and entertaining power off mechanism that the
pfuze100 hardware implements.
- Conversion of the fixed regulator API to use GPIO descriptors,
including pulling in a bunch of patches to a bunch of board files.
- New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
BD71847, ST PMIC1, and TI LM363x devices.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNyl0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DubB/4nWL/XSUb7qIm2fjjMUffelfk4/viB
MZg3JPEMr7ahK+QC1RQ5nOmkuACSU3Uij8RE1omLp5isfCiSa+e17f9uQx4Cn/pw
9DsIeJUEC4LvZ9gA9pDf0313B/0BIYfOMJToyLgwTNmJl+T+0e59RcS4TTCEqxwD
PmpPakOvCTD6YuVI7HhYL/HXJK1buvrAiENSjCyfyJTDaMSzJl6WMn+eibFaZbDn
NXwj2W+QyuiFCdl/7/4NWaqhlyOvM05ivnnLM/SPMBj+Iu4gSZ0PX81z98eZ3M66
YSPhF2o5SkhhffFx5xjpgR3VquXDVb0oefzhvJmZYHXi7ZKKMruoYaGB
=Ztu3
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The biggest chunk of the regulator changes for this release outside of
the new drivers is the conversion of the fixed regulator to use the
GPIO descriptor API, there's a small addition to the GPIO API plus a
bunch of updates to board files to implement it. This is some really
welcome work from Linus Walleij that's had a bunch of review and has
been sitting in -next for a while so I'm fairly happy there's no major
issues.
- Helpers for overlapping linear ranges.
- Display opmode and consumer requested load in the regualtor_summary
file in debugfs, plus a fix there.
- Support for the fun and entertaining power off mechanism that the
pfuze100 hardware implements.
- Conversion of the fixed regulator API to use GPIO descriptors,
including pulling in a bunch of patches to a bunch of board files.
- New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
BD71847, ST PMIC1, and TI LM363x devices"
* tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
regulator: lochnagar: Use a consisent comment style for SPDX header
regulator: bd718x7: Remove struct bd718xx_pmic
regulator: Fetch enable gpiods nonexclusive
regulator/gpio: Allow nonexclusive GPIO access
regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
regulator: stpmic1: Return REGULATOR_MODE_INVALID for invalid mode
regulator: stpmic1: add stpmic1 regulator driver
dt-bindings: regulator: document stpmic1 pmic regulators
regulator: axp20x: Mark expected switch fall-throughs
regulator: bd718xx: fix build warning on x86_64
regulator: fixed: Default enable high on DT regulators
regulator: bd718xx: rename bd71837 to 718xx
regulator: bd718XX use pickable ranges
regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
regulator: Support regulators where voltage ranges are selectable
mfd: dt bindings: add BD71847 device-tree binding documentation
regulator: dt bindings: add BD71847 device-tree binding documentation
regulator/mfd: Support ROHM BD71847 power management IC
regulator: da905{2,5}: Remove unnecessary array check
regulator: qcom: Add PMS405 regulators
...
|
||
|---|---|---|
| .. | ||
| include/mach | ||
| am200epd.c | ||
| am300epd.c | ||
| balloon3.c | ||
| capc7117.c | ||
| cm-x2xx-pci.c | ||
| cm-x2xx-pci.h | ||
| cm-x2xx.c | ||
| cm-x255.c | ||
| cm-x270.c | ||
| cm-x300.c | ||
| colibri-evalboard.c | ||
| colibri-pxa3xx.c | ||
| colibri-pxa270-income.c | ||
| colibri-pxa270.c | ||
| colibri-pxa300.c | ||
| colibri-pxa320.c | ||
| colibri.h | ||
| corgi_pm.c | ||
| corgi.c | ||
| csb701.c | ||
| csb726.c | ||
| csb726.h | ||
| devices.c | ||
| devices.h | ||
| em-x270.c | ||
| eseries-irq.h | ||
| eseries.c | ||
| ezx.c | ||
| generic.c | ||
| generic.h | ||
| gumstix.c | ||
| gumstix.h | ||
| h5000.c | ||
| h5000.h | ||
| himalaya.c | ||
| hx4700.c | ||
| icontrol.c | ||
| idp.c | ||
| idp.h | ||
| irq.c | ||
| Kconfig | ||
| littleton.c | ||
| littleton.h | ||
| lpd270.c | ||
| lpd270.h | ||
| lubbock.c | ||
| magician.c | ||
| mainstone.c | ||
| Makefile | ||
| Makefile.boot | ||
| mfp-pxa2xx.c | ||
| mfp-pxa2xx.h | ||
| mfp-pxa3xx.c | ||
| mfp-pxa3xx.h | ||
| mfp-pxa25x.h | ||
| mfp-pxa27x.h | ||
| mfp-pxa300.h | ||
| mfp-pxa320.h | ||
| mfp-pxa930.h | ||
| mioa701_bootresume.S | ||
| mioa701.c | ||
| mioa701.h | ||
| mp900.c | ||
| mxm8x10.c | ||
| mxm8x10.h | ||
| palm27x.c | ||
| palm27x.h | ||
| palmld.c | ||
| palmt5.c | ||
| palmt5.h | ||
| palmtc.c | ||
| palmte2.c | ||
| palmte2.h | ||
| palmtreo.c | ||
| palmtreo.h | ||
| palmtx.c | ||
| palmz72.c | ||
| palmz72.h | ||
| pcm027.c | ||
| pcm027.h | ||
| pcm990_baseboard.h | ||
| pcm990-baseboard.c | ||
| pm.c | ||
| pm.h | ||
| poodle.c | ||
| pxa_cplds_irqs.c | ||
| pxa-dt.c | ||
| pxa2xx.c | ||
| pxa3xx-ulpi.c | ||
| pxa3xx.c | ||
| pxa3xx.h | ||
| pxa25x.c | ||
| pxa25x.h | ||
| pxa27x-udc.h | ||
| pxa27x.c | ||
| pxa27x.h | ||
| pxa300.c | ||
| pxa300.h | ||
| pxa320.c | ||
| pxa320.h | ||
| pxa930.c | ||
| pxa930.h | ||
| raumfeld.c | ||
| regs-rtc.h | ||
| regs-u2d.h | ||
| reset.c | ||
| saar.c | ||
| sharpsl_pm.c | ||
| sharpsl_pm.h | ||
| sleep.S | ||
| smemc.c | ||
| spitz_pm.c | ||
| spitz.c | ||
| standby.S | ||
| stargate2.c | ||
| tavorevb.c | ||
| tosa_bt.h | ||
| tosa-bt.c | ||
| tosa.c | ||
| trizeps4.c | ||
| udc.h | ||
| viper.c | ||
| viper.h | ||
| vpac270.c | ||
| xcep.c | ||
| z2.c | ||
| zeus.c | ||
| zeus.h | ||
| zylonite_pxa300.c | ||
| zylonite_pxa320.c | ||
| zylonite.c | ||
| zylonite.h | ||