AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
5cf9a338db
kernel_optimize_test/drivers/pinctrl
History
Paweł Chmiel 5cf9a338db pinctrl: samsung: Correct EINTG banks order 
All banks with GPIO interrupts should be at beginning of bank array and
without any other types of banks between them.  This order is expected
by exynos_eint_gpio_irq, when doing interrupt group to bank translation.
Otherwise, kernel NULL pointer dereference would happen when trying to
handle interrupt, due to wrong bank being looked up.  Observed on
s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping
it to gpi bank.

Cc: stable@vger.kernel.org
Fixes: 023e06dfa6 ("pinctrl: exynos: add exynos5410 SoC specific data")
Fixes: 608a26a7bc ("pinctrl: Add s5pv210 support to pinctrl-exynos)
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-18 17:45:08 +02:00
..
aspeed
bcm
berlin
freescale pinctrl: imx: Add pinctrl driver support for imx6sll 2018-03-23 04:16:10 +01:00
intel pinctrl: intel: Implement intel_gpio_get_direction callback 2018-03-23 04:07:22 +01:00
mediatek pinctrl: mtk: fix check warnings. 2018-03-26 10:58:33 +02:00
meson Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
mvebu This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
nomadik pinctrl: nomadik: Drop U8540/9540 support 2018-03-23 03:38:14 +01:00
pxa
qcom This is the bulk of GPIO changes for the v4.17 kernel cycle: 2018-04-05 09:51:41 -07:00
samsung pinctrl: samsung: Correct EINTG banks order 2018-04-18 17:45:08 +02:00
sh-pfc Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
sirf
spear pinctrl: spear: Delete an error message for a failed memory allocation in spear_pinctrl_probe() 2018-01-03 08:46:55 +01:00
sprd pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() 2018-01-16 11:08:24 +01:00
stm32 pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency 2018-03-23 04:04:40 +01:00
sunxi pinctrl: sunxi: add support for the Allwinner H6 main pin controller 2018-03-27 15:09:42 +02:00
tegra pinctrl: tegra: Delete two error messages for a failed memory allocation in tegra_pinctrl_probe() 2018-01-03 08:46:55 +01:00
ti
uniphier pinctrl: uniphier: add UART hardware flow control pin-mux settings 2018-03-27 15:14:43 +02:00
vt8500 pinctrl: vt8500: Delete an error message for a failed memory allocation in five functions 2018-01-08 08:15:46 +01:00
zte
core.c pinctrl: core: Add missing EXPORT on pinctrl_register_mappings 2018-03-02 11:05:35 +01:00
core.h
devicetree.c pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs 2018-03-02 09:41:21 +01:00
devicetree.h
Kconfig Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
Makefile Pin control bulk changes for the v4.17 kernel cycle: 2018-04-03 12:20:54 -07:00
pinconf-generic.c
pinconf.c
pinconf.h
pinctrl-amd.c pinctrl/amd: poll InterruptEnable bits in enable_irq 2018-03-26 11:09:49 +02:00
pinctrl-amd.h
pinctrl-artpec6.c pinctrl: artpec-6: Add smaller groups for uarts 2018-03-01 17:04:09 +01:00
pinctrl-as3722.c
pinctrl-at91-pio4.c pinctrl: at91-pio4: account for const type of of_device_id.data 2018-01-08 08:15:47 +01:00
pinctrl-at91.c pinctrl: at91: Delete an error message for a failed memory allocation in at91_pinctrl_mux_mask() 2018-01-03 08:46:49 +01:00
pinctrl-at91.h
pinctrl-axp209.c pinctrl: axp209: account for const type of of_device_id.data 2018-01-08 08:15:47 +01:00
pinctrl-coh901.c
pinctrl-coh901.h
pinctrl-da850-pupd.c
pinctrl-digicolor.c
pinctrl-falcon.c
pinctrl-gemini.c This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
pinctrl-ingenic.c pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() 2018-01-18 08:51:32 +01:00
pinctrl-lantiq.c
pinctrl-lantiq.h
pinctrl-lpc18xx.c
pinctrl-max77620.c
pinctrl-mcp23s08.c pinctrl: mcp23s08: add open drain configuration for irq output 2018-02-22 16:08:59 +01:00
pinctrl-ocelot.c pinctrl: ocelot: fix gpio direction 2018-03-26 11:04:48 +02:00
pinctrl-oxnas.c
pinctrl-palmas.c pinctrl: palmas: Delete an error message for a failed memory allocation in palmas_pinctrl_probe() 2018-01-03 08:46:49 +01:00
pinctrl-pic32.c
pinctrl-pic32.h
pinctrl-pistachio.c
pinctrl-rk805.c
pinctrl-rockchip.c pinctrl: rockchip: Fix a typo in four comment lines 2018-01-03 08:46:51 +01:00
pinctrl-rza1.c
pinctrl-single.c pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 2018-03-26 10:48:17 +02:00
pinctrl-st.c
pinctrl-sx150x.c pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping 2018-01-18 11:04:47 +01:00
pinctrl-tb10x.c
pinctrl-u300.c
pinctrl-utils.c pinctrl: utils: Delete an error message for a failed memory allocation in pinctrl_utils_add_map_configs() 2018-01-03 08:46:53 +01:00
pinctrl-utils.h
pinctrl-xway.c pinctrl: xway: Delete two error messages for a failed memory allocation in pinmux_xway_probe() 2018-01-03 08:46:53 +01:00
pinctrl-zynq.c
pinmux.c pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() 2018-01-16 11:07:18 +01:00
pinmux.h