AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
5df78e73d3
kernel_optimize_test/arch/powerpc/boot
History
York Sun 9b53a9e28a fbdev: powerpc: driver for Freescale 8610 and 5121 DIU 
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs

All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0.  Changing pixel clock has no effect
on other fbs.

Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0

required command line parameters to preallocate memory for frame buffer diufb.

optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:

Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60

Bpp
bpp=32, bpp=24, or bpp=16

Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS

Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.

If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:40 -07:00
..
dtc-src [POWERPC] Update .gitignore files 2008-01-17 14:57:09 +11:00
dts fbdev: powerpc: driver for Freescale 8610 and 5121 DIU 2008-04-28 08:58:40 -07:00
libfdt [POWERPC] Merge libfdt upstream source 2007-12-11 13:46:13 +11:00
.gitignore [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore 2008-04-25 09:48:13 +10:00
4xx.c [POWERPC] 4xx: logical/bitand typo in powerpc/boot/4xx.c 2008-01-25 07:13:39 -06:00
4xx.h [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper 2008-01-08 07:58:09 -06:00
44x.h [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
addnote.c
addRamDisk.c
bamboo.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cpm-serial.c [POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram. 2008-04-17 01:01:37 -05:00
crt0.S
cuboot-8xx.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-52xx.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-83xx.c [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias 2008-01-23 19:32:47 -06:00
cuboot-85xx-cpm2.c [POWERPC] Add a cuboot wrapper for 85xx with CPM2 2008-01-27 14:10:36 -06:00
cuboot-85xx.c [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias 2008-01-23 19:32:47 -06:00
cuboot-824x.c [POWERPC] Add initial iomega StorCenter board port. 2008-01-23 19:54:36 -06:00
cuboot-bamboo.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-ebony.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-katmai.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-mpc7448hpc2.c [POWERPC] bootwrapper: Build multiple cuImages 2008-02-07 11:40:19 +11:00
cuboot-pq2.c [POWERPC] cuboot-pq2: PCI fixes 2008-04-17 01:01:40 -05:00
cuboot-rainier.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-sequoia.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-taishan.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-warp.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-yosemite.c [POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board 2008-03-26 07:19:17 -05:00
cuboot.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
cuboot.h
dcr.h [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper 2008-01-08 07:58:09 -06:00
devtree.c [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
div64.S
dummy.c
ebony.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
elf_util.c
elf.h
ep88xc.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
ep405.c [POWERPC] 4xx: EP405 boards support for arch/powerpc 2007-12-23 13:13:14 -06:00
ep8248e.c [POWERPC] 82xx: Embedded Planet EP8248E support 2008-01-23 19:34:43 -06:00
fixed-head.S [POWERPC] 8xx/wrapper: Embedded Planet EP88xC support 2007-10-04 11:02:40 -05:00
flatdevtree_env.h Fix file references in documentation and Kconfig 2008-01-22 10:43:36 -08:00
fsl-soc.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
fsl-soc.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
gunzip_util.c [POWERPC] boot: Simplify gunzip_finish 2007-10-03 11:48:43 +10:00
gunzip_util.h
hack-coff.c
holly.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
install.sh
io.h [POWERPC] bootwrapper: Add 16-bit I/O, sync(), eieio(), and barrier() 2007-08-22 15:21:48 +10:00
libfdt_env.h [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
libfdt-wrapper.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
main.c [POWERPC] Kill flatdevtree.c 2007-12-11 13:46:15 +11:00
Makefile [POWERPC] bootwrapper: fix build error on virtex405-head.S 2008-04-24 13:32:47 -05:00
mktree.c
mpc8xx.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
mpc8xx.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
mpc52xx-psc.c [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
mpsc.c [POWERPC] prpmc2800: Clean up dts properties 2008-04-15 21:21:24 +10:00
mv64x60_i2c.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.h
ns16550.c [POWERPC] Xilinx: boot support for Xilinx uart 16550. 2008-04-24 13:32:46 -05:00
of.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
of.h
ofconsole.c
oflib.c
ops.h [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
page.h
planetcore.c [POWERPC] bootwrapper: Add PlanetCore firmware support 2007-10-03 11:48:43 +10:00
planetcore.h [POWERPC] bootwrapper: Add PlanetCore firmware support 2007-10-03 11:48:43 +10:00
ppc_asm.h
ppcboot.h [POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h 2007-08-22 15:21:48 +10:00
pq2.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
pq2.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
prpmc2800.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
ps3-head.S [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
ps3-hvcall.S [POWERPC] PS3: Fix bootwrapper hang bug 2008-02-14 22:11:01 +11:00
ps3.c [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
README
redboot-8xx.c [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
redboot.h [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
reg.h [POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper 2007-12-23 13:14:22 -06:00
rs6000.h
serial.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
simple_alloc.c
simpleboot.c [POWERPC] bootwrapper: Add a firmware-independent simpleboot target. 2008-04-02 20:36:11 -05:00
stdio.c
stdio.h
stdlib.c [POWERPC] bootwrapper: Add strtoull() 2007-09-14 01:33:23 +10:00
stdlib.h [POWERPC] bootwrapper: Add strtoull() 2007-09-14 01:33:23 +10:00
string.h [POWERPC] Add memchr() to the bootwrapper 2007-10-12 14:13:44 +10:00
string.S [POWERPC] Add memchr() to the bootwrapper 2007-10-12 14:13:44 +10:00
treeboot-bamboo.c [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
treeboot-ebony.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
treeboot-walnut.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
types.h
uartlite.c [POWERPC] Uartlite: bootwrapper bug fix, getc loops forever 2007-10-10 09:14:35 -06:00
util.S
virtex405-head.S [POWERPC] bootwrapper: Add a firmware-independent simpleboot target. 2008-04-02 20:36:11 -05:00
wrapper [POWERPC] bootwrapper: Use physical address in PHDR for uImage 2008-04-17 07:46:14 +10:00
zImage.coff.lds.S
zImage.lds.S
zImage.ps3.lds.S

README 

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter